W-M1B108

Unit Price Total

16*DI AD V/thermo RS485 Modbus module

  • 16 channel differential AD RS485 Modbus module
  • ±100/500mV/1/5/10V
  • 0..100/500mV/1/5/10V
  • thermo couple J/K/T/E/R/S/B/N type
  • 16bit res. 2,5Hz ±0,1%FSR
  • DI channel to channel protection 240V by discrete AD per chan. to cover ground errors
  • easy Modbus node address setting by 2 rotary switches
  • sensor disconnection or fail function detection
  • hot swap and auto configuration
  • non volatile back up parameter EEPROM can easy replaced from module to module
  • programmable power-on and safety values
  • isolation protection up to 3kV
  • up to ±35V on input
  • wide power range +10..+60VDC (ripple peak should not exceed 5V)
  • various combination on site 3 LED diagnosis
  • Baud rate 1200..115.2Kbps
  • operating temperature -25..+70°C
  • 2,8W@24VDC
  • cost effective space saving 47,2mm slim size
  • Advanio
w-m1b108

Product search

Enter up to three search terms that are relevant for the product you are looking for. Available products will be shown below.


 
Produkt-ID Short description Unit price

Acceed News

Talos-3012: EtherCAT components for intelligent networks

EtherCAT is by far the fastest industrial Ethernet technology. In particular in the rapidly growing application areas of Automation 4.0, the Internet of Things and M2M communication, EtherCAT results in ... Read more

Nuvo-2510VTC: PC for vehicles with PoE, CAN bus and wireless

PCs for installation in vehicles must be robust, vibration-free and impact-resistant and designed for direct connection to the vehicle’s battery. The new PC for vehicles, the Nuvo-2510VTC from Acceed, meets ... Read more

Nuvo-2500: Automation PC with PCI / PCIe cassette

High processor performance, robust, service-free casing, a compact construction as well as a large number of interfaces which are already integrated: the Nuvo-2500 has everything which an efficient embedded PC ... Read more

INJ-102GT: PoE for everybody!

End devices in data networks, for example cameras, barcode scanners or sensors must be provided with current. For this purpose, either an electricity source is necessary at every end device ... Read more