- **Digital I/O Configuration:** - 16 TTL-level digital inputs - 16 open-collector digital outputs (negative logic) - All input channels can be configured as interrupt sources - **Logic Level:** - TTL (5VDC, negative logic) - Compatible with standard 5V TTL devices - **Interrupt Functionality:** - Four interrupt input signals combined into one interrupt request (INTA#) - Software-configurable interrupt trigger edge (rising or falling) - **High-Speed Operation:** - Input response time: 200 nanoseconds (max) - Output switching time: 1 microsecond (typical) - **Output Drive Capability:** - Open collector outputs capable of sinking up to 40 mA per channel - Maximum output voltage: 30VDC - **Input Characteristics:** - Input resistance: 10 kΩ (pull-up) - Input current: 5VDC, 6.4 mA typical - **Compact PCI Form Factor:** - Short-size PCI board (121.69 mm × 106.68 mm × 19 mm) - Occupies one PCI slot - **Connector Type:** - 37-pin female D-sub (D-type) connector (JAE DCL-J37SAF-20L9 or equivalent) - **Software Support:** - Windows and Linux drivers (API-TOOL) - LabVIEW VI-DAQ library for National Instruments LabVIEW integration - License-free development and runtime drivers - **Compatibility:** - Fully compliant with PCI Local Bus Specification Revision 2.2 - Supports both 5V and 3.3V PCI signaling environments

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **16 TTL Inputs / 16 Open-Collector Outputs:** Provides 16 unisolated TTL-level input channels and 16 unisolated open-collector output channels. Each channel supports a response time of 200 nanoseconds, enabling high-speed digital signal processing. - **Interrupt Capability on All Inputs:** All 16 input channels can be configured as interrupt request signals. Interrupts can be enabled or disabled per bit, and the triggering edge (rising or falling) can be selected via software. - **Digital Noise Filter:** A software-configurable digital filter prevents false signal recognition due to noise or contact chattering. Filter time constants are adjustable from 0.25 µs to 131.072 ms. - **Driver and Software Support:** Includes Windows and Linux driver libraries (API-PAC(W32), API-DIO(WDM), API-DIO(98/PC), API-DIO(LNX)) and diagnostic utilities. Compatible with Visual Basic, Visual C++, C#, Delphi, and gcc. - **LabVIEW Integration:** Supported by CONTEC’s VI-DAQ library, enabling seamless integration with National Instruments LabVIEW for data acquisition and control applications. - **PCI Bus Compatibility:** Fully compliant with 32-bit, 33 MHz PCI bus specifications. Supports both 3.3V and 5V universal key slots. - **Backward Compatibility:** Connector pin assignments and functions are compatible with the earlier PIO-16/16T(PCI) model, simplifying system upgrades. - **Compact and Lightweight Design:** Dimensions of 121.69 mm (L) × 105.68 mm (H) and a weight of approximately 100 g. - **Regulatory Compliance:** Certified for RoHS, CE, and VCCI standards.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **64 total I/O channels:** 32 TTL-level inputs and 32 open-collector outputs. - **High-speed response:** Input response time of 200 nanoseconds (typical). - **Negative logic operation:** Inputs and outputs operate on TTL-level negative logic. - **Interrupt capability:** Four input signals (I00–I03) can generate interrupt requests; combined into one INTA line. - **Digital filter function:** Programmable digital filter for input channels to suppress noise and contact chattering. - **Handshake function:** STB/ACK handshake control for input channels 0–15. - **Output data monitoring:** Output states can be read back without affecting output conditions. - **Bit and group I/O operations:** Supports bit-level and group-level input/output addressing. - **Compact PCI short-size form factor:** 121.69 mm (L) × 107.0 mm (H) × 18.5 mm (D). - **Plug & Play configuration:** Automatic resource allocation (I/O address and IRQ) by the PCI BIOS. - **Multiple board support:** Up to 16 boards can be installed in a single system. - **Software support:** Drivers for Windows and Linux, plus LabVIEW VI-DAQ library. - **API compatibility:** Supports CONTEC’s API-PAC(W32) and API-TOOL libraries for application development.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **Unisolated 32-Channel TTL Inputs and 32-Channel Open-Collector Outputs:** Provides 32 input channels (negative logic, TTL level, 10 kΩ pull-up) and 32 output channels (open collector, max. 30 VDC, 40 mA per channel). Both input and output circuits operate with a response time of 200 ns or less. - **Full Interrupt Capability:** All 32 input channels can be configured as interrupt request sources. Interrupts can be enabled or disabled per bit, and the triggering edge (rising or falling) can be selected individually. - **Digital Input Filtering:** A software-configurable digital filter prevents false triggering due to noise or contact chattering. Filter time constants are adjustable via software from 0 s to 131.072 ms. - **High-Speed PCI Bus Interface:** Compliant with 32-bit, 33 MHz PCI bus specifications, supporting both 3.3 V and 5 V universal key slots. The board draws power from the +5 V PCI rail. - **Comprehensive Software Support:** Includes Windows and Linux driver libraries (API-PAC(W32)), diagnostic utilities, and sample programs. Compatible with Visual Basic, Visual C++, C#, Delphi, and gcc. - **LabVIEW Integration:** Supported by CONTEC’s VI-DAQ library, enabling seamless integration with National Instruments LabVIEW for data acquisition and control applications. - **Compact and Lightweight Design:** Board dimensions are 121.69 mm (L) × 105.68 mm (H), with a weight of approximately 100 g. - **RoHS, CE, and VCCI Certified:** Meets international environmental and electromagnetic compliance standards.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **High‑Speed Bus Mastering:** Supports PCI bus master DMA transfer at up to 80 MB/s, enabling direct memory access between the board and PC memory without CPU overhead. - **Flexible I/O Configuration:** 32 TTL‑level digital channels configurable as 32‑bit input, 32‑bit output, or 16‑bit input + 16‑bit output. - **High‑Frequency Pattern I/O:** Capable of 20 MHz sampling (input) and 20 MHz pattern generation (output). - **On‑Board FIFO Buffers:** 1 K‑word FIFO memory per channel (input and output) ensures stable high‑speed data flow. - **Synchronization Control (SC) Connectors:** Enables inter‑board synchronization for up to 16 boards, allowing simultaneous operation across multiple channels or systems. - **Interrupt and Timer Functions:** Four input lines (DIOA00–DIOA03) can generate software‑controlled interrupts on rising edges. An integrated timer provides precise timing even under Windows OS. - **Bus Mastering Control Signals:** Includes REQ/ACK handshake lines and external start/stop/clock inputs for precise control of pattern I/O. - **Software Support:** Bundled with CONTEC’s API‑PAC(W32) driver library for Windows and API‑DIO(LNX) for Linux, supporting Visual C/C++, Visual Basic, Delphi, Builder, gcc, and Kylix. - **General‑Purpose I/O Mode:** Can function as a standard digital I/O board when bus mastering is not required. - **Compact PCI Form Factor:** Standard PCI 32‑bit, 33 MHz interface with universal keying for both 3.3 V and 5 V slots.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **48-Channel Bi-Directional Digital I/O:** Provides 48 unisolated TTL-level I/O channels, configurable as input or output in 8-bit units (4-bit units for certain ports). Compatible with the functional equivalent of Intel i8255 Mode 0 operation. - **High-Speed Response:** Achieves a response time of **200 nanoseconds**, enabling fast digital signal processing suitable for real-time control systems. - **Interrupt Functionality:** All 48 input channels can be used as interrupt inputs. Interrupts can be enabled or disabled per bit, and the triggering edge (rising or falling) can be selected individually. - **Digital Noise Filter:** Integrated digital filter function prevents false signal recognition caused by noise or contact chattering. Filter parameters are software-configurable. - **Driver and Software Support:** Bundled with **API-PAC(W32)** driver library supporting both **Windows** and **Linux** environments. Includes **API-DIO(WDM)** and **API-DIO(98/PC)** for Windows, and **API-DIO(LNX)** for Linux. Compatible with **LabVIEW** via the **VI-DAQ** library for seamless integration with National Instruments environments. - **Connector Compatibility:** Uses a 68-pin 0.8mm pitch female connector (HDRA-F68LFDT+ by Honda Tsushin Kogyo or equivalent). Connector and pin assignments are compatible with CONTEC’s CardBus model **PIO-48D(CB)H** and PCI model **PIO-48D(PCI)**, simplifying system migration. - **Dual Bracket Support:** Supplied with interchangeable brackets for both **Low Profile** and **Standard PCI** slots. - **RoHS, CE, and VCCI Certified:** Complies with major environmental and electromagnetic compatibility standards.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

- **48 Bi-Directional TTL Channels:** Provides 48 channels configurable as input or output, supporting positive logic TTL-level signals. - **8255 Mode 0 Compatibility:** Fully emulates the Intel 8255 PPI Mode 0 operation, ensuring compatibility with legacy systems and software. - **High-Speed Response:** Achieves a maximum response time of 200 nanoseconds, suitable for high-frequency digital signal processing. - **Interrupt Capability:** All 48 input signals can generate interrupt requests, allowing event-driven control and monitoring. - **Non-Isolated Design:** Direct TTL-level interfacing for maximum speed and minimal latency, ideal for short-distance, low-noise environments. - **PCI Bus Interface:** Compliant with 32-bit, 33 MHz PCI bus (5V signaling), ensuring plug-and-play installation and automatic resource allocation. - **Compact Form Factor:** Short-size PCI board (176.41 mm × 106.68 mm) suitable for standard desktop or industrial PCs. - **Software Support:** Includes Windows and Linux drivers (API-TOOL), and LabVIEW VI-DAQ library for seamless integration with development environments. - **Flexible Connectivity:** Equipped with one 96-pin half-pitch connector for external I/O and two 50-pin mini-ribbon connectors for expansion or signal routing. - **High Current Drive Capability:** Supports output drive of up to 24 mA (sink) and -15 mA (source) per channel. - **Comprehensive Accessory Support:** Compatible with CONTEC’s range of terminal blocks, cables, and connector accessories for easy wiring and system integration.

Hersteller: Contec

Kategorie: DIO Non-Isolated PCI

Compact PCI bus Digital IO card, 48DIO, rugged 100pin SCSI-II connector, 100*160mm, Adlink

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

**Digital I/O Capabilities** - 48‑channel TTL/DTL‑compatible digital I/O lines. - Emulates two industry‑standard **Intel 8255 Programmable Peripheral Interface (PPI)** chips operating in Mode 0. - Buffered circuits for enhanced drive capability and signal integrity. - Direct interface with **OPTO‑22‑compatible I/O modules** for isolation and field interfacing. - Output status read‑back for verification of output states. **Timer/Counter and Interrupt System** - Integrated **8254 programmable timer/counter** with three 16‑bit counters. - **32‑bit cascaded timer** for watchdog or periodic interrupt generation. - **16‑bit event counter** for external event counting or frequency measurement. - Programmable interrupt source selection with **dual interrupt system (INT1 and INT2)**. - Supports external event and timer‑based interrupt generation. **Rear I/O and Latch Functionality** - Rear I/O through **100‑pin SCSI‑II connector** on CompactPCI J2 interface. - Includes **R7249 rear I/O transition board (DB‑100RU)** with two 50‑pin OPTO‑22 connectors. - External latch input (EXTCLK, pin 99) for capturing digital input data synchronously. **Power and Protection** - Provides **+5 V and +12 V auxiliary power** on OPTO‑22 connectors for external modules. - On‑board **resettable fuses** protect external devices from overcurrent or short circuits. **Software and Driver Support** - Comprehensive driver suite for **Windows 95/98/NT/2000/XP**, **Linux**, and **DOS**. - Compatible with **LabVIEW®, HP‑VEE™, DASYLab™, InTouch™, InControl™, ISaGRAF™, and OPC** environments. - Includes **PCIS‑DASK** and **PCIS‑DASK/X** driver libraries, **ActiveX (DAQBench™)** controls, and **C/C++/VB/Delphi** APIs. **Industrial Design** - Compact 3U form factor for CompactPCI backplanes. - Rugged construction with rear I/O option for high‑density, cable‑free front panels. - Plug‑and‑Play PCI configuration—no manual address or IRQ settings required.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **High-Speed Digital I/O:** - 32-channel 5 V TTL-compatible digital input/output lines. - Configurable as 16 DI/16 DO, 32 DI, or 32 DO. - Maximum data transfer rate of **80 MB/s** (32-bit @ 20 MHz internal clock). - **Advanced Data Transfer Architecture:** - **Bus Mastering DMA** with **scatter/gather** support for high-throughput, low-latency data movement. - **32k-word FIFO** (64 kB total) for input and output buffering. - **Independent 16k-word FIFOs** for DI and DO channels. - **Flexible Clocking and Triggering:** - Internal clock sources: 20 MHz, 10 MHz, or programmable timer (82C54). - External clock input up to 40 MHz. - Handshaking and burst handshaking modes for synchronized data exchange. - Independent trigger lines (DI_TRG, DO_TRG) for acquisition and pattern generation. - **Programmable Timer/Counter:** - Onboard **Intel/NEC 8254-compatible 3-channel timer** for pacer clock generation and interrupt timing. - Timer #0 for DI pacing, Timer #1 for DO pacing, Timer #2 for interrupt generation. - **Auxiliary I/O:** - 4 auxiliary digital inputs and 4 auxiliary digital outputs (TTL-compatible). - **Active Termination:** - Software-controlled active terminators for high-speed, long-distance signal integrity. - 111 Ω termination resistors with 2.9 V bias voltage. - **Software & OS Support:** - Drivers for **Windows 7/Vista/XP/2000/2003 Server** and **Linux**. - Compatible with **LabVIEW™, HP-VEE™, DAQBench™, and AD-Logger**. - APIs and libraries for **C/C++, VB, Delphi, and .NET** environments. - **Form Factor & Interface:** - 3U CompactPCI Eurocard (100 mm × 160 mm). - 100-pin SCSI-II female connector for all I/O signals.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **48 Digital I/O Channels:** Provides a total of 48 programmable digital input/output lines for flexible signal interfacing. - **8255 Mode 0 Emulation:** Fully emulates the Intel 8255 PPI in Mode 0, ensuring compatibility with existing software and hardware architectures that utilize 8255-based I/O control logic. - **CompactPCI Bus Interface:** Designed for the CompactPCI (cPCI) bus standard, enabling robust, high-speed communication with industrial-grade computing systems. - **Plug and Play Configuration:** Supports automatic resource allocation and configuration, minimizing setup time and eliminating manual jumper or DIP switch settings. - **Front-Panel Connectivity:** Equipped with a front-mounted SCSI connector for easy access and connection to external devices. - **50-Pin Flat Cable Interface:** Includes a 1×50-pin flat cable connector for convenient signal routing and integration with external I/O modules or terminal boards. - **Industrial Form Factor:** Standard 3U cPCI card dimensions (100 mm × 160 mm) suitable for compact, high-density system integration. - **High Reliability:** Designed for continuous operation in industrial environments, with robust electrical isolation and signal integrity. - **Flexible I/O Configuration:** Each channel can be configured as input or output, supporting a wide range of digital control and monitoring applications. - **Axiom Quality Assurance:** Manufactured by Axiom, known for reliable embedded computing and industrial I/O solutions.

Hersteller: Axiom

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Designed for integration into standard PXI or CompactPCI chassis, ensuring compatibility with modular test and measurement systems. - **4×1 Multiplexer Configuration:** Provides four input channels that can be switched to a single output, enabling flexible signal routing and selection in automated test setups. - **High-Frequency Performance:** Offers a –3 dB bandwidth of up to 3 GHz, supporting RF and microwave signal applications. - **50 Ω Impedance:** Optimized for RF signal integrity and minimal reflection losses, ensuring accurate high-frequency measurements. - **Hot-Swappable Compliance:** Fully compliant with PICMG 2.1 R1.0 hot-swap standards, allowing safe insertion and removal without powering down the system. - **Plug and Play Operation:** Automatically recognized by PXI controllers, simplifying configuration and reducing setup time. - **Connector Options:** Available with SMA or SMB connectors to match system-level interface requirements. - **Compact Design:** 3U height and 100 mm × 160 mm Eurocard dimensions for efficient use of chassis space. - **High Reliability:** Designed for continuous operation in automated test environments with robust mechanical and electrical construction.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI/cPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, enabling seamless integration into standard PXI chassis. - **4×1 Multiplexer Configuration:** Provides four input channels selectable to a single output, allowing flexible signal routing and switching in automated test setups. - **Broadband Performance:** Offers a **1.3 GHz (-3 dB)** bandwidth, supporting high-frequency signal switching with minimal insertion loss and excellent signal integrity. - **50 Ω Impedance Matching:** Optimized for RF and high-speed analog applications requiring consistent impedance control to minimize reflections and signal degradation. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0** hot-swap specifications, allowing safe insertion and removal without powering down the PXI chassis. - **Plug-and-Play Operation:** Automatically recognized by PXI system controllers, simplifying configuration and reducing setup time. - **Connector Options:** Available with **SMA** or **SMB** connectors to accommodate different signal interface requirements. - **Compact Dimensions:** Standard **100 mm × 160 mm** Eurocard size, compatible with 3U PXI slots. - **High Reliability:** Designed for long operational life in demanding test environments, with robust mechanical construction and high-quality RF relays.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **4×1 Multiplexer Configuration:** Provides four input channels multiplexed to a single output, enabling efficient signal routing and selection in automated test setups. - **High Bandwidth Performance:** Offers a **-3 dB bandwidth of 900 MHz**, supporting high-frequency signal switching for RF and high-speed analog applications. - **Controlled Impedance:** Designed with **50 Ω characteristic impedance**, ensuring signal integrity and minimal reflection for RF and analog signal paths. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0 Hot Swap** specifications, allowing safe insertion and removal of the module without powering down the PXI chassis. - **Plug and Play Operation:** Supports automatic detection and configuration within PXI systems, simplifying integration and reducing setup time. - **Connector Options:** Available with **SMA or SMB connectors**, providing flexibility for different signal interface requirements. - **Compact Dimensions:** Standard **100 × 160 mm** Eurocard size, optimized for PXI 3U slots. - **High Reliability:** Built with industrial-grade components for long-term stability and consistent performance in demanding test environments.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **Dual 4×1 Multiplexer Configuration:** Two independent 4-channel-to-1-channel multiplexers allow flexible signal routing and switching between multiple test points or instruments. - **High Bandwidth Performance:** Supports up to **3 GHz (-3 dB bandwidth)**, ensuring minimal signal degradation and accurate high-frequency measurements. - **50 Ω Impedance Matching:** Optimized for RF and high-speed analog signal integrity, minimizing reflection and loss across the switching path. - **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical standards, enabling integration into modular test systems. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0** hot-swap specifications, allowing safe insertion and removal without system shutdown. - **Plug-and-Play Operation:** Automatic recognition and configuration within PXI systems for simplified setup and reduced downtime. - **Compact Dimensions:** Standard **100 mm × 160 mm** Eurocard size, suitable for dense system configurations. - **High Reliability Switching:** Designed for long operational life and consistent performance under repetitive switching cycles. - **Software Integration:** Compatible with PXI system controllers and software frameworks for automated test sequencing and control.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **Dual 4×1 Multiplexer Configuration:** Two independent 4-to-1 multiplexers allow flexible signal routing, enabling multiple input channels to be switched to a single output path. - **High Bandwidth Performance:** Offers a **1.3 GHz (-3 dB)** bandwidth, suitable for high-frequency analog and RF signal switching applications. - **50 Ω Impedance Matching:** Ensures consistent signal transmission quality and minimizes reflection losses, ideal for precision measurement and communication test setups. - **PXI / CompactPCI 3U Form Factor:** Fully compatible with PXI and CompactPCI chassis, supporting modular test system architectures. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0**, allowing safe insertion and removal without powering down the chassis. - **Plug-and-Play Operation:** Automatic recognition and configuration by PXI system controllers, simplifying setup and reducing integration time. - **Compact Dimensions:** Standard **100 mm × 160 mm** Eurocard size, optimized for high-density test environments. - **High Reliability:** Designed for continuous operation in demanding test and measurement environments, with robust mechanical and electrical construction. - **Scalable System Integration:** Can be combined with other PXI switching and measurement modules to build complex automated test systems.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **Dual 4×1 Multiplexer Configuration:** Two independent 4-channel-to-1 multiplexers allow flexible signal routing for multiple test paths or device-under-test (DUT) configurations. - **High Bandwidth Performance:** Delivers a -3 dB bandwidth of 900 MHz, ensuring signal integrity for high-frequency analog and RF applications. - **Controlled 50 Ω Impedance:** Optimized for RF and high-speed analog signal switching, minimizing reflection and insertion loss. - **PXI / CompactPCI 3U Form Factor:** Fully compatible with PXI and CompactPCI chassis, supporting modular test system integration. - **Hot-Swappable Design:** Compliant with PICMG 2.1 R1.0 hot-swap specifications, enabling safe insertion and removal without system power-down. - **Plug-and-Play Operation:** Automatic recognition and configuration within PXI systems, simplifying setup and reducing integration time. - **Compact Dimensions:** Standard 3U size (100 mm × 160 mm) for efficient use of chassis space. - **High Reliability Switching:** Designed for long operational life and consistent performance under demanding test conditions. - **Software Integration:** Compatible with PXI system controllers and standard drivers for seamless integration into automated test software environments.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compatible with PXI and CompactPCI chassis, offering standardized mechanical and electrical interfaces. - **16-Channel Relay Matrix:** Configured as a **4×4×1 matrix**, allowing flexible routing between multiple input and output channels. - **High Switching Capacity:** Supports up to **60 W**, **220 VDC**, and **2 A** maximum switching load, suitable for both signal-level and moderate power applications. - **Hot-Swappable Compliance:** Conforms to **PICMG 2.1 R1.0**, enabling insertion and removal without powering down the chassis. - **Plug-and-Play Operation:** Automatically recognized by PXI controllers for simplified system integration and configuration. - **Compact 3U Size:** Occupies minimal rack space (100 mm × 160 mm), ideal for dense test setups. - **D-Type Connector Interface:** Provides robust and standardized connectivity for external wiring and signal routing. - **High Reliability Relays:** Designed for long operational life and consistent switching performance. - **PXI System Synchronization:** Compatible with PXI trigger and timing resources for coordinated test sequences. - **Versatile Application Range:** Suitable for signal routing, device under test (DUT) connection, and automated test equipment (ATE) switching matrices.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **32-Relay Matrix Configuration:** Provides a flexible **16-channel relay matrix** that can be configured as **8×4×1** or **4×4×2** (rows × columns × banks), allowing multiple switching topologies for different test setups. - **High Switching Capacity:** Supports a **maximum switching power of 60 W**, **maximum switching voltage of 220 VDC**, and **maximum switching current of 2 A**, suitable for both low-level signal routing and moderate power switching. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0**, enabling safe insertion and removal from a powered PXI chassis without system shutdown. - **Plug and Play Operation:** Automatically recognized by PXI systems for simplified configuration and reduced setup time. - **D-Type Connector Interface:** Equipped with a **D-type connector** for secure and standardized signal connections. - **Compact Dimensions:** Standard **3U PXI card size (100 × 160 mm)** for efficient use of chassis space. - **High Reliability Relays:** Utilizes durable electromechanical relays optimized for long operational life and consistent switching performance. - **Flexible Matrix Topology:** Supports multiple matrix configurations to accommodate different test signal routing requirements. - **PXI System Integration:** Seamlessly integrates with PXI controllers, signal conditioning modules, and measurement instruments for automated test systems.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **8 Independent Power Relay Channels:** Each channel operates independently, allowing simultaneous control of multiple circuits or devices. - **Form C (SPDT) Relay Configuration:** Each relay provides both normally open (NO) and normally closed (NC) contacts, enabling versatile switching topologies. - **High Current Capacity:** Rated for **5A switching current** per channel, suitable for power-level signal routing and load control. - **High Voltage and Power Ratings:** Supports up to **250 VAC** or **30 VDC**, with a maximum switching capacity of **1250 VA (AC)** or **150 W (DC)**. - **PXI / CompactPCI 3U Form Factor:** Designed for integration into standard PXI or CompactPCI chassis, ensuring compatibility with modular instrumentation systems. - **Hot-Swappable (PICMG 2.1 R1.0 Compliant):** Supports live insertion and removal without system shutdown, minimizing downtime and improving serviceability. - **Plug-and-Play Operation:** Automatically recognized by PXI controllers, simplifying configuration and reducing setup time. - **Compact Design:** Standard **3U size (100 mm x 160 mm)** for efficient use of chassis space. - **Industrial Reliability:** Built with high-quality relays and durable PCB materials for long operational life and consistent performance. - **Flexible Application Range:** Ideal for automated test equipment (ATE), signal routing, load switching, and power control in laboratory and production environments.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and cPCI 3U mechanical and electrical specifications, allowing seamless integration into standard PXI chassis. - **16 Independent Power Relays:** Each channel provides a Form C (SPDT) relay configuration, enabling flexible switching between normally open (NO), normally closed (NC), and common (COM) contacts. - **High Current Capacity:** Each relay supports up to **5A** at **250 VAC** or **30 VDC**, with a maximum switching capacity of **1250 VA / 150 W**. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0** hot-swap specifications, allowing safe insertion and removal without powering down the PXI chassis. - **Plug-and-Play Operation:** Automatic detection and configuration within PXI systems, simplifying setup and reducing integration time. - **Compact 3U Size:** Standard **100 mm x 160 mm** Eurocard dimensions for efficient use of chassis space. - **High Reliability:** Industrial-grade relays ensure long operational life and consistent performance under demanding conditions. - **Flexible Control:** Software-controllable relay activation for automated test sequences and programmable switching operations. - **Isolation and Safety:** Each relay channel is electrically isolated, minimizing crosstalk and ensuring safe operation in mixed-signal environments.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **16 Independent Power Relay Channels:** Each channel operates independently, providing flexible switching configurations for complex test setups. - **High Current Capacity:** Rated at **8A per channel**, supporting both AC and DC loads. - **Form C (SPDT) Relay Configuration:** Each relay provides a common, normally open (NO), and normally closed (NC) contact, allowing versatile switching between circuits. - **High Power Handling:** Maximum switching capacity of **1250 VA (AC)** or **150 W (DC)**, suitable for medium to high power applications. - **Voltage Ratings:** Supports up to **250 VAC** or **30 VDC** switching voltage. - **PXI / CompactPCI 3U Form Factor:** Standard 3U (100 mm x 160 mm) board size ensures compatibility with PXI and cPCI chassis. - **Hot-Swappable Design:** Fully compliant with **PICMG 2.1 R1.0** hot-swap specification, allowing insertion or removal without powering down the chassis. - **Plug and Play Operation:** Automatic resource detection and configuration through PXI system software. - **Industrial-Grade Reliability:** Designed for long operational life and consistent performance in demanding environments. - **Seamless Integration:** Compatible with ADLINK PXI controllers and third-party PXI systems.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **4×1 RF Multiplexer Configuration:** The PXI-7661 provides four input channels that can be switched to a single output path, enabling flexible signal routing for multi-channel test setups. - **High-Frequency Performance:** Offers a **3 GHz (-3 dB) bandwidth**, supporting high-frequency RF and video signal applications with minimal insertion loss and excellent signal integrity. - **75 Ω Impedance:** Optimized for systems requiring 75 Ω impedance matching, such as broadcast, video, and telecommunications environments. - **PXI/cPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring seamless integration into modular test systems. - **Programmable Delay:** Provides programmable switching delay control for precise timing alignment and synchronization in automated test sequences. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0**, allowing insertion or removal of the module without shutting down the PXI chassis. - **Plug-and-Play Operation:** Automatically recognized by PXI system controllers, simplifying configuration and reducing setup time. - **SMB Connectors:** Equipped with high-quality SMB connectors for reliable RF signal connections and minimal reflection. - **Compact Dimensions:** Standard 3U PXI size (100 mm × 160 mm), suitable for dense system integration. - **High Reliability:** Designed for long-term operation in demanding test environments, with robust mechanical construction and stable electrical performance.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **PXI / CompactPCI 3U Form Factor:** Fully compliant with PXI and CompactPCI 3U mechanical and electrical specifications, ensuring compatibility with standard PXI chassis and controllers. - **4×1 RF Multiplexer Configuration:** Four input channels multiplexed to a single output, enabling efficient signal routing and selection in RF test setups. - **High-Frequency Performance:** Supports up to **1.5 GHz (-3 dB bandwidth)**, suitable for broadband RF applications, communication testing, and high-speed signal switching. - **75 Ω Characteristic Impedance:** Optimized for video, broadcast, and communication systems that require 75 Ω signal paths, ensuring minimal reflection and signal loss. - **Programmable Delay Function:** Allows precise timing control and synchronization between channels, enhancing test accuracy and repeatability. - **Hot-Swappable (PICMG 2.1 R1.0 Compliant):** Enables safe insertion and removal of the module without powering down the PXI chassis, minimizing system downtime. - **Plug and Play Operation:** Automatically recognized by PXI system software, simplifying configuration and reducing setup time. - **SMB Connectors:** Compact, high-quality RF connectors providing secure and low-loss connections for high-frequency signals. - **Compact Dimensions:** Standard **100 mm × 160 mm** Eurocard size, fitting seamlessly into PXI 3U slots. - **Robust Design:** Built for industrial and laboratory environments, ensuring long-term reliability and consistent performance.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI

- **Dual 4×1 RF Multiplexer Configuration:** Two independent 4-to-1 multiplexers on a single 3U PXI card, enabling flexible signal routing and switching between multiple RF channels. - **High-Frequency Performance:** Supports up to **3 GHz bandwidth (-3 dB point)**, ensuring low insertion loss and high signal integrity across a wide frequency range. - **75 Ω Characteristic Impedance:** Optimized for video, broadcast, and communication test systems requiring 75 Ω signal paths. - **Programmable Delay Function:** Allows fine-tuning of signal timing for synchronization and calibration in complex test setups. - **PXI / CompactPCI 3U Form Factor:** Fully compatible with PXI and CompactPCI chassis, providing modular scalability and integration with other PXI instruments. - **Hot-Swappable Design:** Compliant with **PICMG 2.1 R1.0**, enabling safe insertion and removal without powering down the chassis. - **Plug and Play Configuration:** Automatic detection and configuration within PXI systems, reducing setup time and simplifying system integration. - **SMB Connectors:** Compact, reliable RF connectors for secure signal connections and minimal reflection losses. - **Compact Dimensions:** Standard **100 mm × 160 mm** Eurocard size for efficient use of PXI chassis space. - **High Reliability and Durability:** Designed for continuous operation in demanding test environments with robust mechanical and electrical design.

Hersteller: Adlink Technology Inc.

Kategorie: DIO Non-Isolated PXI/PXIe/cPCI