- **16 Analog Input Channels:** Enables simultaneous or sequential measurement of multiple analog signals. - **12-Bit Resolution:** Provides fine granularity in signal conversion, allowing accurate representation of analog input voltages. - **Sampling Rate:** Up to **10 kHz**, suitable for low- to mid-speed data acquisition tasks. - **Input Voltage Range:** Configurable for **0–9 V** or **±9 V**, accommodating both unipolar and bipolar signal sources. - **1 Digital-to-Analog Output Channel:** 12-bit resolution output for generating analog control or reference signals. - **Low-Cost Design:** Optimized for affordability without compromising essential performance metrics. - **Compact Form Factor:** Designed for easy integration into existing systems or test setups. - **Versatile Application Range:** Suitable for signal monitoring, control systems, and educational use. - **Stable and Reliable Operation:** Ensures consistent performance across a variety of environmental and electrical conditions.

Hersteller: Keine Kategorie

Kategorie: Low Cost Experimental Cards

- **IEEE‑488 / GPIB Compatibility:** Fully compliant with the IEEE‑488.1 and IEEE‑488.2 standards, ensuring interoperability with a wide range of laboratory and industrial instruments. - **Integrated Controller Functionality:** Operates as both a system controller and a device interface, supporting talker, listener, and controller modes. - **High‑Speed Data Transfer:** Optimized for efficient data throughput across the GPIB bus, supporting transfer rates up to several hundred kilobytes per second depending on host system performance. - **Plug‑and‑Play Interface:** Delivered with a pre‑assembled connection cable, simplifying installation and reducing setup time. - **Robust Electrical Design:** Shielded connectors and grounded interface circuitry minimize electromagnetic interference and ensure signal integrity. - **Software Support:** Compatible with standard GPIB communication libraries and drivers, enabling integration with common test and measurement software environments. - **Industrial Reliability:** Designed for continuous operation in laboratory and production environments, with durable connectors and stable electronic components. - **Compact Form Factor:** Fits standard expansion slots or interface ports (depending on variant), allowing integration into desktop PCs, industrial controllers, or embedded systems.

Hersteller: Keine Kategorie

Kategorie: Low Cost Experimental Cards

- **Dedicated Interface Panel for Digital I/O Cards:** Designed specifically to connect digital input/output cards to external devices, sensors, or actuators. - **High Signal Integrity:** Ensures minimal signal loss and interference between the I/O card and connected field devices. - **Robust Construction:** Built for industrial environments, offering mechanical stability and long-term reliability. - **Simplified Wiring:** Provides labeled terminals or connectors for quick and error-free wiring of multiple digital channels. - **Modular Design:** Compatible with various digital I/O card configurations, allowing flexible system integration. - **Ease of Maintenance:** Enables quick disconnection and reconnection of I/O lines during system upgrades or troubleshooting. - **Compact Form Factor:** Optimized for control cabinets, test racks, or DIN rail mounting. - **Compatibility:** Supports a wide range of digital I/O cards used in data acquisition, control, and automation systems. - **Safety and Organization:** Reduces wiring clutter and potential cross-talk by providing a structured connection interface. - **Scalability:** Can be used individually or in combination with multiple panels for large-scale I/O systems.

Hersteller: Keine Kategorie

Kategorie: Low Cost Experimental Cards

- **High‑Density Digital I/O:** 192 individually addressable digital input/output lines for large‑scale signal interfacing. - **8255 PPI Architecture:** Utilizes multiple Intel 8255 programmable peripheral interface chips, ensuring compatibility with standard I/O addressing and control modes (Mode 0, Mode 1, Mode 2). - **Integrated Counters:** Six independent 16‑bit hardware counters capable of handling input frequencies up to **2 MHz**, suitable for event counting, frequency measurement, and pulse generation. - **Flexible Configuration:** Each port can be configured as input or output, supporting TTL‑level logic signals. - **High‑Speed Operation:** Optimized for fast digital signal processing and real‑time control applications. - **Modular Design:** Can be integrated into PC‑based control systems via standard bus interfaces (e.g., PCI, ISA, or proprietary backplane, depending on variant). - **Industrial Reliability:** Designed for continuous operation in industrial environments with robust electrical isolation and noise immunity (depending on configuration). - **Software Programmability:** Fully programmable through standard I/O registers; compatible with common development environments and driver libraries for Windows and Linux. - **Scalable System Integration:** Multiple cards can be combined to expand I/O capacity beyond 192 channels.

Hersteller: Keine Kategorie

Kategorie: Low Cost Experimental Cards

- **48 Digital I/O Channels:** Configurable as input or output in groups, allowing flexible adaptation to various control and monitoring tasks. - **Intel 8255‑Compatible Interface:** Fully compatible with the industry‑standard 8255 Programmable Peripheral Interface (PPI), ensuring broad software and hardware compatibility. - **16 Status LEDs:** Integrated LED indicators provide real‑time visualization of I/O states for diagnostics and monitoring. - **3 × 16‑Bit Hardware Counters:** High‑precision counters/timers supporting input frequencies up to **2 MHz**, suitable for event counting, frequency measurement, and timing applications. - **High‑Speed Digital Operation:** Optimized for fast signal processing and low‑latency communication with host systems. - **Modular Design:** Compact PCB layout suitable for integration into industrial PCs, embedded controllers, or custom automation systems. - **Robust Electrical Design:** TTL‑level digital I/O with noise‑resistant circuitry for reliable operation in industrial environments. - **Software Programmability:** Supports direct register access and standard driver interfaces for easy integration into control software. - **Diagnostic Feedback:** LED indicators and counter readouts simplify troubleshooting and system verification.

Hersteller: Keine Kategorie

Kategorie: Low Cost Experimental Cards

- **High-Resolution Measurement:** 4½-digit (20,000-count) resolution for precise analog signal acquisition. - **Sampling Rate:** Supports up to 2 kHz measurement frequency, suitable for dynamic signal monitoring and fast data logging. - **Galvanic Isolation:** Complete electrical isolation between measurement inputs and communication interfaces ensures signal integrity and user safety, minimizing ground loop interference. - **Autoranging Function:** Automatically selects the optimal measurement range for voltage and resistance inputs, simplifying operation and improving accuracy. - **Wide Measurement Ranges:** - DC Voltage: 30 mV to 300 V - Resistance: 30 kΩ to 300 kΩ - **Digital I/O Interface:** 8 TTL-compatible digital input/output channels for control, triggering, or synchronization with external devices. - **Software Integration:** Supplied with Windows-compatible software and device drivers for configuration, data acquisition, and analysis. - **Multiplexer Compatibility:** Fully supports the AX758 16-Channel Multiplexer Panel, allowing expansion to multi-channel measurement systems. - **Compact Virtual Instrument Design:** Designed for integration into PC-based measurement systems, offering the functionality of a traditional data logger in a virtualized, software-driven environment. - **Isolated Measurement Channels:** Ensures accurate readings even in electrically noisy environments or when measuring signals from different ground potentials.

Hersteller: Axiom

Kategorie: PC Instruments

- **Programmable Signal Generation:** Fully programmable output parameters, including waveform type, amplitude, frequency, and DC offset. - **Multiple Waveform Types:** Supports pseudo-random noise, sinusoidal, rectangular (square), and triangular waveforms for a wide range of test scenarios. - **High Output Voltage Range:** Delivers up to **20 V peak-to-peak** output amplitude with fine resolution control of **4.88 mV**. - **Adjustable DC Offset:** Provides a programmable offset range of **±5 V** with a resolution of **2.44 mV**, allowing precise signal positioning relative to ground. - **Wide Frequency Range:** Operates across a frequency range of **0 Hz to 1 MHz** for sine and square waveforms, and up to **0.5 MHz** for triangle and noise signals. - **50 Ω BNC Output:** Standardized coaxial output connector ensures compatibility with laboratory instruments, oscilloscopes, and measurement systems. - **Windows Software Control:** Supplied with dedicated Windows-based control software for intuitive configuration, waveform selection, and parameter adjustment. - **Device Drivers Included:** Compatible with standard device drivers for integration into automated test setups and custom software environments. - **High Signal Integrity:** Designed for low distortion and stable amplitude across the full frequency range. - **Compact and Robust Design:** Built for bench-top or rack-mounted use in professional test environments.

Hersteller: Axiom

Kategorie: PC Instruments

- **16 Trigger Channels:** Enables simultaneous monitoring of up to 16 digital signals for complex logic analysis. - **High-Speed Sampling:** Internal clock frequency adjustable from **100 Hz to 200 MHz**, allowing detailed timing resolution for both low-speed and high-speed digital systems. - **Large Memory Capacity:** Total memory of **4 Mbit**, with **128 kbit per channel**, ensuring deep capture capability for long-duration signal analysis. - **Protocol Support:** Supports decoding and analysis of **CAN**, **PROFIBUS**, and other serial communication protocols. - **USB 2.0 Interface:** Provides both data communication and power supply through a single USB connection, simplifying setup and portability. - **Compact and Portable Design:** Ideal for laboratory, field, or educational use. - **Software Integration:** Compatible with Zeroplus analysis software for waveform visualization, trigger configuration, and protocol decoding. - **High Accuracy and Stability:** Designed for consistent performance across a wide range of frequencies and signal types. - **Cross-Compatibility:** Can be used alongside other measurement instruments such as the **SM2040 Series PCI Digital Multimeter** for comprehensive system testing.

Hersteller: Keine Kategorie

Kategorie: PC Instruments

**C32128 Logic Analyzer** - **32 Trigger Channels:** Enables simultaneous monitoring of multiple digital lines for complex system debugging. - **Supported Protocols:** CAN, PROFIBUS, and other industrial communication standards. - **Internal Clock Range:** 100 Hz to 200 MHz, allowing flexible timing analysis across low- and high-speed digital systems. - **Memory Capacity:** 4 Mbit total memory with a memory depth of 128 kbit per channel for extended capture sessions. - **Interface:** USB 2.0 compatible interface for both data transfer and power supply. - **Manufacturer:** Zeroplus, known for compact, high-speed logic analyzers for embedded and industrial applications. **SM2040 Series PCI Digital Multimeter** - **High Resolution:** 6½-digit display for precise measurement resolution. - **High Accuracy:** Basic DC voltage accuracy of 0.0045%. - **Fast Sampling:** Up to 1,000 readings per second (rps). - **Multifunctional Measurement:** Supports DC/AC voltage and current, resistance (2-, 4-, and 6-wire), capacitance, inductance, frequency, period, pulse width, and temperature. - **Source Functions (SM2044):** Integrated DC/AC voltage and current sourcing for parametric testing. - **Guarded Resistance Measurement:** 6-wire guarded configuration for high-precision low-resistance measurements. - **Triggering Options:** External hardware and analog threshold triggers for synchronized measurements. - **PCI Interface:** Designed for integration into PC-based test systems and automated measurement setups. - **Applications:** Telecommunications, aerospace, automotive testing, education, and laboratory research.

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **High Resolution and Accuracy:** 6½-digit resolution with 0.0045% basic DC voltage accuracy ensures precise and repeatable measurements. - **High-Speed Measurement:** Capable of up to **1000 readings per second (rps)**, ideal for production testing and data acquisition systems. - **Comprehensive Measurement Functions:** Supports DC and AC voltage and current, 2-wire and 4-wire resistance, diode characterization, and true RMS AC measurements. - **Wide Measurement Range:** Measures from **1 µV to 330 V** with **330 V isolation** from earth ground. - **True RMS AC Measurement:** Frequency range from **10 Hz to 100 kHz**, ensuring accurate readings for complex waveforms. - **Self-Calibration:** Internal self-calibration maintains accuracy over time and temperature variations. - **Software Integration:** Includes **PNP (Plug and Play) software** with a graphical user interface for configuration, control, and data visualization. - **Compact PCI Form Factor:** Designed for PCI bus systems, enabling easy integration into automated test setups. - **Safety and Isolation:** 330 V DC / 250 V AC isolation and overload protection, compliant with **IEC 1010-1, Installation Category II**. - **Low Power Consumption:** Operates from a **+5 V supply at 300 mA**, minimizing system power requirements.

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **High Resolution and Accuracy:** 6½-digit resolution with up to 0.0045% basic DC voltage accuracy ensures precise and repeatable measurements. - **High-Speed Measurement:** Capable of up to **1,000 readings per second**, enabling rapid data acquisition in automated test environments. - **Multifunction Measurement Capability:** Measures DC and AC voltage and current, 2-wire and 4-wire resistance, capacitance, frequency, and period. Supports true RMS AC measurements from 10 Hz to 100 kHz. - **Wide Measurement Range:** Voltage measurement from **1 µV to 330 V**, current measurement up to **2.5 A**, and resistance measurement up to **330 MΩ**. - **Frequency and Timing Functions:** Frequency counter from **1 Hz to 300 kHz**, period measurement, pulse width, and totalizer functions. - **Capacitance Measurement:** Ranges from **10 nF to 10 mF** with high accuracy and stability. - **Self-Calibration:** Internal self-calibration ensures long-term accuracy and minimizes drift. - **High Isolation and Safety:** 330 V DC / 250 V AC isolation from earth ground, designed to IEC 1010-1 safety standards (Installation Category II). - **Software Integration:** Includes PnP software with a graphical user interface for configuration, control, and data visualization. - **Compact PCI Form Factor:** Designed for PCI slot installation with dimensions of **208 mm × 112 mm**, requiring only +5 V at 300 mA.

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **High Resolution and Accuracy:** 6½-digit resolution with 0.0045% basic DC voltage accuracy ensures precise and repeatable measurements. - **High-Speed Sampling:** Capable of up to 1,000 readings per second (rps), supporting both high-speed data acquisition and high-resolution modes. - **Comprehensive Measurement Functions:** Measures DC/AC voltage and current, 2-wire/4-wire/6-wire resistance, capacitance, inductance, frequency, period, pulse width, and temperature. - **True RMS Measurements:** Provides accurate AC voltage and current readings from 10 Hz to 100 kHz. - **Integrated Source Functions (SM2044 only):** Programmable DC and AC voltage and current sources for component characterization and parametric testing. - **LCR Measurement Capability:** Measures capacitance from 10 nF to 10 mF and inductance from 33 µH to 3.3 H with selectable test frequencies. - **Self-Calibration:** Internal self-calibration ensures long-term stability and accuracy. - **High Isolation and Safety:** 330 V DC / 250 V AC isolation from earth ground, designed to IEC 1010-1 safety standards. - **Software Integration:** Includes PNP software with a graphical user interface for configuration, control, and data visualization. - **Compact PCI Form Factor:** Fits standard PCI slots, enabling integration into PC-based automated test systems. - **Flexible Triggering:** Supports external hardware and analog threshold triggers for synchronized measurements. - **Wide Operating Range:** Operates from -10°C to +70°C, suitable for industrial and laboratory environments.

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **7½-Digit Resolution** with 24,000,000-count A/D converter - **High-Speed Sampling:** Up to 1,400 readings per second (SM2060), 20,000 readings/s (SM2064) - **Zero Latency Measurement Engine:** 0.5 rps to 20,000 rps - **Programmable Aperture and Interval:** 2.5 µs to 5 s - **Fast Range Switching:**

Hersteller: Keine Kategorie

Kategorie: PC Instruments

- **True 7½‑Digit Resolution** with 24‑bit A/D converter (24 million counts) - **High‑Speed Measurement:** Up to 20 000 readings/s (zero‑latency architecture) - **Programmable Aperture and Interval:** 2.5 µs to 5 s integration control - **Fast Range Switching:**

Hersteller: Keine Kategorie

Kategorie: PC Instruments