WD-DASK
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- High-Speed Sampling:
- 65 MS/s per channel simultaneous sampling.
- Up to 130 MS/s in single-channel ping-pong mode.
- High Resolution:
- 14-bit analog-to-digital conversion for precise waveform digitization.
- Deep Onboard Memory:
- Standard 128 MB SDRAM, expandable to 512 MB SODIMM SDRAM.
- 3k-sample FIFO buffer for real-time streaming.
- Flexible Input Configuration:
- Two simultaneous-sampled single-ended analog input channels.
- Programmable input ranges of ±1 V and ±5 V.
- Selectable input impedance: 50 Ω or 1.5 MΩ.
- Wide Bandwidth:
- Minimum -3 dB bandwidth of 30 MHz per channel.
- Input coupling: DC.
- Advanced Triggering:
- Supports software, analog, digital, and SSI triggers.
- Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Repeated trigger acquisition with 2-cycle rearming interval.
- Analog trigger sensitivity: 256 steps across full-scale range.
- Digital trigger compatibility: 5 V TTL, minimum pulse width 10 ns.
- Multiple Device Synchronization:
- System Synchronization Interface (SSI) for multi-card synchronization.
- Common trigger and timebase sharing across multiple PCI-9820 boards.
- Auto-Calibration:
- Fully software-controlled calibration using onboard trim DACs.
- Calibration constants stored in EEPROM.
- Reference voltage: +5.000 V, drift ±2 ppm/°C, stability 6 ppm/1000 hrs.
- Bus Interface:
- 32-bit, 33 MHz PCI bus (3.3 V or 5 V signaling).
- Scatter-gather bus mastering DMA for efficient data transfer.
- Compact Design:
- Half-size PCI form factor (175 mm × 107 mm).
- 65 MS/s per channel simultaneous sampling.
- Up to 130 MS/s in single-channel ping-pong mode.
- High Resolution:
- 14-bit analog-to-digital conversion for precise waveform digitization.
- Deep Onboard Memory:
- Standard 128 MB SDRAM, expandable to 512 MB SODIMM SDRAM.
- 3k-sample FIFO buffer for real-time streaming.
- Flexible Input Configuration:
- Two simultaneous-sampled single-ended analog input channels.
- Programmable input ranges of ±1 V and ±5 V.
- Selectable input impedance: 50 Ω or 1.5 MΩ.
- Wide Bandwidth:
- Minimum -3 dB bandwidth of 30 MHz per channel.
- Input coupling: DC.
- Advanced Triggering:
- Supports software, analog, digital, and SSI triggers.
- Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Repeated trigger acquisition with 2-cycle rearming interval.
- Analog trigger sensitivity: 256 steps across full-scale range.
- Digital trigger compatibility: 5 V TTL, minimum pulse width 10 ns.
- Multiple Device Synchronization:
- System Synchronization Interface (SSI) for multi-card synchronization.
- Common trigger and timebase sharing across multiple PCI-9820 boards.
- Auto-Calibration:
- Fully software-controlled calibration using onboard trim DACs.
- Calibration constants stored in EEPROM.
- Reference voltage: +5.000 V, drift ±2 ppm/°C, stability 6 ppm/1000 hrs.
- Bus Interface:
- 32-bit, 33 MHz PCI bus (3.3 V or 5 V signaling).
- Scatter-gather bus mastering DMA for efficient data transfer.
- Compact Design:
- Half-size PCI form factor (175 mm × 107 mm).
Comprehensive Product Summary: ADLINK PCI-9820W/512
### 1. Product Overview
Product Name: PCI-9820W/512
Model: PCI-9820W/512
Series: PCI-9820 Series High-Speed Digitizers
Article Number: PCI-9820W/512
Manufacturer: ADLINK Technology Inc.
Product Type: PCI Bus Analog-to-Digital (A/D) Digitizer Card
Category: PCI Data Acquisition (DAQ) and Digitizer Hardware
The ADLINK PCI-9820W/512 is a high-performance, two-channel, 14-bit PCI digitizer designed for high-speed waveform acquisition and analysis. It supports sampling rates up to 65 MS/s per channel and up to 130 MS/s in single-channel “ping-pong” mode. Equipped with up to 512 MB of onboard SODIMM SDRAM, the PCI-9820W/512 provides deep acquisition memory for extended waveform recording, independent of PCI bus bandwidth limitations. The card is ideal for applications requiring high-resolution, high-speed data capture such as radar, ultrasound, RF signal analysis, and software-defined radio.
### 2. Key Features
- High-Speed Sampling:
- 65 MS/s per channel simultaneous sampling.
- Up to 130 MS/s in single-channel ping-pong mode.
- High Resolution:
- 14-bit analog-to-digital conversion for precise waveform digitization.
- Deep Onboard Memory:
- Standard 128 MB SDRAM, expandable to 512 MB SODIMM SDRAM.
- 3k-sample FIFO buffer for real-time streaming.
- Flexible Input Configuration:
- Two simultaneous-sampled single-ended analog input channels.
- Programmable input ranges of ±1 V and ±5 V.
- Selectable input impedance: 50 Ω or 1.5 MΩ.
- Wide Bandwidth:
- Minimum -3 dB bandwidth of 30 MHz per channel.
- Input coupling: DC.
- Advanced Triggering:
- Supports software, analog, digital, and SSI triggers.
- Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Repeated trigger acquisition with 2-cycle rearming interval.
- Analog trigger sensitivity: 256 steps across full-scale range.
- Digital trigger compatibility: 5 V TTL, minimum pulse width 10 ns.
- Multiple Device Synchronization:
- System Synchronization Interface (SSI) for multi-card synchronization.
- Common trigger and timebase sharing across multiple PCI-9820 boards.
- Auto-Calibration:
- Fully software-controlled calibration using onboard trim DACs.
- Calibration constants stored in EEPROM.
- Reference voltage: +5.000 V, drift ±2 ppm/°C, stability 6 ppm/1000 hrs.
- Bus Interface:
- 32-bit, 33 MHz PCI bus (3.3 V or 5 V signaling).
- Scatter-gather bus mastering DMA for efficient data transfer.
- Compact Design:
- Half-size PCI form factor (175 mm × 107 mm).
### 3. Technical Specifications
Analog Input:
- Channels: 2 simultaneous-sampled single-ended inputs.
- Resolution: 14 bits.
- Sampling Rate:
- 65 MS/s per channel (external timebase).
- 60 MS/s per channel (internal timebase).
- 130 MS/s single-channel (ping-pong mode, external timebase).
- Bandwidth (-3 dB): ≥30 MHz.
- Input Ranges: ±1 V, ±5 V (software programmable).
- Input Coupling: DC.
- Input Impedance: 50 Ω or 1.5 MΩ (solder-selectable).
- Overvoltage Protection:
- ±5 V range: ±14 V protection.
- ±1 V range: ±5 V protection.
- Crosstalk: -80 dB (DC to 1 MHz).
- Total Harmonic Distortion (THD): -75 dB.
- Signal-to-Noise Ratio (SNR):
- ±5 V range: 66 dB.
- ±1 V range: 62 dB.
- Spurious-Free Dynamic Range (SFDR): 75 dB.
Memory:
- Onboard SDRAM: 128 MB standard, up to 512 MB optional.
- FIFO Buffer: 3 k-samples.
Timebase System:
- Internal Timebase: 60 MHz.
- External Timebase Input:
- Connector: SMB.
- Impedance: 50 Ω.
- Coupling: AC.
- Input Amplitude: 1 Vpp to 2 Vpp.
- Frequency Range: 500 kHz to 65 MHz.
- Overvoltage Protection: 2.5 Vpp.
Triggering:
- Sources: Software, analog, digital, SSI.
- Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Analog Trigger:
- Source: CH0 or CH1.
- Slope: Rising/falling.
- Sensitivity: 256 steps.
- Digital Trigger:
- Source: External SMB connector.
- Compatibility: 5 V TTL.
- Minimum Pulse Width: 10 ns.
- Repeated Trigger Interval: 2 cycles of timebase.
- Pre/Post Trigger Depth: Up to full memory capacity (128–512 MB).
Calibration:
- Reference Voltage: +5.000 V.
- Temperature Drift: ±2 ppm/°C.
- Stability: 6 ppm/1000 hrs.
- Warm-up Time: 15 minutes recommended.
Physical & Environmental:
- Dimensions: 175 mm × 107 mm (excluding connectors).
- Operating Temperature: 0°C to 50°C.
- Storage Temperature: -20°C to 80°C.
- Relative Humidity: 5% to 95%, non-condensing.
Power Requirements:
- +5 V: 895 mA.
- +12 V: 295 mA.
- +3.3 V: 310 mA (128 MB SDRAM) / 430 mA (512 MB SDRAM).
Connectors:
- Analog Inputs: 2 × BNC (CH0, CH1).
- External Trigger/Clock: 2 × SMB (TRG IO, CLK IN).
- SSI Synchronization: 20-pin header.
### 4. Functionality
The PCI-9820W/512 operates as a high-speed digitizer for analog signal acquisition. Two 14-bit pipeline ADCs simultaneously sample input signals at up to 65 MS/s per channel. In single-channel “ping-pong” mode, the ADCs alternate sampling to achieve up to 130 MS/s. The digitized data is first stored in onboard SDRAM, then transferred to host memory via scatter-gather DMA, ensuring efficient throughput even under PCI bandwidth constraints.
Use Cases and Applications:
- Radar and sonar waveform capture.
- Ultrasound imaging and analysis.
- RF and communication signal digitization.
- Software-defined radio (SDR) development.
- Transient signal analysis and event capture.
- Automated Test Equipment (ATE).
- Laboratory and industrial measurement systems.
- Biotechnological and medical instrumentation.
Compatibility:
- PCI 32-bit, 33 MHz bus (3.3 V/5 V).
- Supported operating systems: Windows 98/NT/2000, Linux.
- Software integration with LabVIEW®, ActiveX, and custom C/C++/VB applications.
### 5. Components & Accessories
Included Items:
- PCI-9820W/512 Digitizer Card.
- ADLINK All-in-One Software CD.
- Software Installation Guide.
- User’s Manual (PDF).
Optional Accessories:
- SMB-SMB-1M: 1-meter SMB-to-SMB cable.
- SMB-BNC-1M: 1-meter SMB-to-BNC cable.
- ACL-SSI-2: SSI synchronization cable for 2 devices.
- ACL-SSI-3: SSI synchronization cable for 3 devices.
- ACL-SSI-4: SSI synchronization cable for 4 devices.
Connectors:
- CH0, CH1: BNC connectors for analog input.
- CLK IN: SMB connector for external timebase.
- TRG IO: SMB connector for external digital trigger.
- SSI: 20-pin header for synchronization bus.
### 6. Installation & Setup
Requirements:
- Available PCI slot (32-bit, 33 MHz).
- Compatible host system with Windows or Linux OS.
- Administrative privileges for driver installation.
Installation Steps:
1. Power off the host PC and discharge static electricity.
2. Insert the PCI-9820W/512 into an available PCI slot.
3. Secure the card and reconnect system power.
4. Install drivers from the ADLINK CD using the Software Installation Guide.
5. Verify installation using the `PCI_SCAN` utility.
Configuration:
- Plug-and-play PCI configuration (no jumpers required).
- Input impedance selectable via solder jumpers (J6, J7).
- Software-configurable input range, trigger mode, and sampling rate.
Mounting Options:
- Standard PCI slot mounting.
- Half-size PCB suitable for compact industrial PCs.
### 7. Performance & Capabilities
Sampling Performance:
- Dual-channel simultaneous sampling at 65 MS/s.
- Single-channel ping-pong mode up to 130 MS/s.
- 14-bit resolution ensures high dynamic range and precision.
Data Throughput:
- Internal SDRAM buffering allows sustained high-speed acquisition.
- Scatter-gather DMA supports large, non-contiguous memory transfers.
- Real-time streaming possible via 3k-sample FIFO when bandwidth allows.
Efficiency & Limitations:
- PCI bus bandwidth (132 MB/s) limits continuous streaming at full rate; onboard memory mitigates this.
- Ping-pong mode available only on CH0.
- External clock must be continuous for stable ADC operation.
Signal Integrity:
- Low distortion (THD -75 dB).
- High SNR (up to 66 dB).
- Crosstalk suppression better than -80 dB.
### 8. Standards & Compliance
Bus Interface:
- PCI Local Bus Specification, Revision 2.2 compliant.
- Universal PCI signaling (3.3 V and 5 V).
Electrical & Safety:
- Overvoltage protection on all analog inputs.
- ESD-sensitive components protected by standard handling procedures.
Environmental Compliance:
- Operating temperature: 0–50°C.
- Storage temperature: -20–80°C.
- Humidity: 5–95% non-condensing.
Certifications:
- CE and FCC Class A (industrial environment).
- RoHS compliant (lead-free manufacturing).
### 9. Additional Information
Warranty:
- Standard 2-year limited warranty from ADLINK Technology.
- Covers defects in materials and workmanship.
- Excludes damage from misuse, improper installation, or environmental factors.
Support & Maintenance:
- Technical support via email: service@adlinktech.com.
- Online resources: [www.adlinktech.com](http://www.adlinktech.com).
- RMA service available with downloadable form from ADLINK website.
Software & Updates:
- WD-DASK: Windows driver library (DLLs for Windows 98/NT/2000).
- WD-DASK/X: Linux shared library driver.
- WD-LVIEW: LabVIEW® driver package (free).
- WD-OCX: ActiveX control library for VB/VC++ integration.
- DAQBench: Optional ActiveX-based visualization and control suite.
Maintenance Recommendations:
- Recalibrate after installation or environmental change.
- Warm-up for 15 minutes before calibration.
- Store in anti-static packaging when not in use.
Ordering Information:
- PCI-9820D/128-0: 2-CH 65 MS/s 14-bit digitizer with 128 MB memory.
- PCI-9820D/512-0: 2-CH 65 MS/s 14-bit digitizer with 512 MB memory (this model).
### Summary
The ADLINK PCI-9820W/512 is a robust, high-resolution PCI digitizer optimized for demanding signal acquisition tasks. Its combination of 14-bit precision, 130 MS/s sampling capability, and deep onboard memory makes it suitable for both laboratory and industrial environments. With flexible triggering, synchronization, and calibration features, it supports complex measurement setups and multi-device configurations. The card’s comprehensive software support ensures seamless integration into custom applications, LabVIEW environments, and automated test systems.
Engineered for reliability and precision, the PCI-9820W/512 delivers consistent performance across a wide range of high-speed data acquisition and waveform analysis applications.
### 1. Product Overview
Product Name: PCI-9820W/512
Model: PCI-9820W/512
Series: PCI-9820 Series High-Speed Digitizers
Article Number: PCI-9820W/512
Manufacturer: ADLINK Technology Inc.
Product Type: PCI Bus Analog-to-Digital (A/D) Digitizer Card
Category: PCI Data Acquisition (DAQ) and Digitizer Hardware
The ADLINK PCI-9820W/512 is a high-performance, two-channel, 14-bit PCI digitizer designed for high-speed waveform acquisition and analysis. It supports sampling rates up to 65 MS/s per channel and up to 130 MS/s in single-channel “ping-pong” mode. Equipped with up to 512 MB of onboard SODIMM SDRAM, the PCI-9820W/512 provides deep acquisition memory for extended waveform recording, independent of PCI bus bandwidth limitations. The card is ideal for applications requiring high-resolution, high-speed data capture such as radar, ultrasound, RF signal analysis, and software-defined radio.
### 2. Key Features
- High-Speed Sampling:
- 65 MS/s per channel simultaneous sampling.
- Up to 130 MS/s in single-channel ping-pong mode.
- High Resolution:
- 14-bit analog-to-digital conversion for precise waveform digitization.
- Deep Onboard Memory:
- Standard 128 MB SDRAM, expandable to 512 MB SODIMM SDRAM.
- 3k-sample FIFO buffer for real-time streaming.
- Flexible Input Configuration:
- Two simultaneous-sampled single-ended analog input channels.
- Programmable input ranges of ±1 V and ±5 V.
- Selectable input impedance: 50 Ω or 1.5 MΩ.
- Wide Bandwidth:
- Minimum -3 dB bandwidth of 30 MHz per channel.
- Input coupling: DC.
- Advanced Triggering:
- Supports software, analog, digital, and SSI triggers.
- Trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Repeated trigger acquisition with 2-cycle rearming interval.
- Analog trigger sensitivity: 256 steps across full-scale range.
- Digital trigger compatibility: 5 V TTL, minimum pulse width 10 ns.
- Multiple Device Synchronization:
- System Synchronization Interface (SSI) for multi-card synchronization.
- Common trigger and timebase sharing across multiple PCI-9820 boards.
- Auto-Calibration:
- Fully software-controlled calibration using onboard trim DACs.
- Calibration constants stored in EEPROM.
- Reference voltage: +5.000 V, drift ±2 ppm/°C, stability 6 ppm/1000 hrs.
- Bus Interface:
- 32-bit, 33 MHz PCI bus (3.3 V or 5 V signaling).
- Scatter-gather bus mastering DMA for efficient data transfer.
- Compact Design:
- Half-size PCI form factor (175 mm × 107 mm).
### 3. Technical Specifications
Analog Input:
- Channels: 2 simultaneous-sampled single-ended inputs.
- Resolution: 14 bits.
- Sampling Rate:
- 65 MS/s per channel (external timebase).
- 60 MS/s per channel (internal timebase).
- 130 MS/s single-channel (ping-pong mode, external timebase).
- Bandwidth (-3 dB): ≥30 MHz.
- Input Ranges: ±1 V, ±5 V (software programmable).
- Input Coupling: DC.
- Input Impedance: 50 Ω or 1.5 MΩ (solder-selectable).
- Overvoltage Protection:
- ±5 V range: ±14 V protection.
- ±1 V range: ±5 V protection.
- Crosstalk: -80 dB (DC to 1 MHz).
- Total Harmonic Distortion (THD): -75 dB.
- Signal-to-Noise Ratio (SNR):
- ±5 V range: 66 dB.
- ±1 V range: 62 dB.
- Spurious-Free Dynamic Range (SFDR): 75 dB.
Memory:
- Onboard SDRAM: 128 MB standard, up to 512 MB optional.
- FIFO Buffer: 3 k-samples.
Timebase System:
- Internal Timebase: 60 MHz.
- External Timebase Input:
- Connector: SMB.
- Impedance: 50 Ω.
- Coupling: AC.
- Input Amplitude: 1 Vpp to 2 Vpp.
- Frequency Range: 500 kHz to 65 MHz.
- Overvoltage Protection: 2.5 Vpp.
Triggering:
- Sources: Software, analog, digital, SSI.
- Modes: Pre-trigger, post-trigger, middle-trigger, delay-trigger.
- Analog Trigger:
- Source: CH0 or CH1.
- Slope: Rising/falling.
- Sensitivity: 256 steps.
- Digital Trigger:
- Source: External SMB connector.
- Compatibility: 5 V TTL.
- Minimum Pulse Width: 10 ns.
- Repeated Trigger Interval: 2 cycles of timebase.
- Pre/Post Trigger Depth: Up to full memory capacity (128–512 MB).
Calibration:
- Reference Voltage: +5.000 V.
- Temperature Drift: ±2 ppm/°C.
- Stability: 6 ppm/1000 hrs.
- Warm-up Time: 15 minutes recommended.
Physical & Environmental:
- Dimensions: 175 mm × 107 mm (excluding connectors).
- Operating Temperature: 0°C to 50°C.
- Storage Temperature: -20°C to 80°C.
- Relative Humidity: 5% to 95%, non-condensing.
Power Requirements:
- +5 V: 895 mA.
- +12 V: 295 mA.
- +3.3 V: 310 mA (128 MB SDRAM) / 430 mA (512 MB SDRAM).
Connectors:
- Analog Inputs: 2 × BNC (CH0, CH1).
- External Trigger/Clock: 2 × SMB (TRG IO, CLK IN).
- SSI Synchronization: 20-pin header.
### 4. Functionality
The PCI-9820W/512 operates as a high-speed digitizer for analog signal acquisition. Two 14-bit pipeline ADCs simultaneously sample input signals at up to 65 MS/s per channel. In single-channel “ping-pong” mode, the ADCs alternate sampling to achieve up to 130 MS/s. The digitized data is first stored in onboard SDRAM, then transferred to host memory via scatter-gather DMA, ensuring efficient throughput even under PCI bandwidth constraints.
Use Cases and Applications:
- Radar and sonar waveform capture.
- Ultrasound imaging and analysis.
- RF and communication signal digitization.
- Software-defined radio (SDR) development.
- Transient signal analysis and event capture.
- Automated Test Equipment (ATE).
- Laboratory and industrial measurement systems.
- Biotechnological and medical instrumentation.
Compatibility:
- PCI 32-bit, 33 MHz bus (3.3 V/5 V).
- Supported operating systems: Windows 98/NT/2000, Linux.
- Software integration with LabVIEW®, ActiveX, and custom C/C++/VB applications.
### 5. Components & Accessories
Included Items:
- PCI-9820W/512 Digitizer Card.
- ADLINK All-in-One Software CD.
- Software Installation Guide.
- User’s Manual (PDF).
Optional Accessories:
- SMB-SMB-1M: 1-meter SMB-to-SMB cable.
- SMB-BNC-1M: 1-meter SMB-to-BNC cable.
- ACL-SSI-2: SSI synchronization cable for 2 devices.
- ACL-SSI-3: SSI synchronization cable for 3 devices.
- ACL-SSI-4: SSI synchronization cable for 4 devices.
Connectors:
- CH0, CH1: BNC connectors for analog input.
- CLK IN: SMB connector for external timebase.
- TRG IO: SMB connector for external digital trigger.
- SSI: 20-pin header for synchronization bus.
### 6. Installation & Setup
Requirements:
- Available PCI slot (32-bit, 33 MHz).
- Compatible host system with Windows or Linux OS.
- Administrative privileges for driver installation.
Installation Steps:
1. Power off the host PC and discharge static electricity.
2. Insert the PCI-9820W/512 into an available PCI slot.
3. Secure the card and reconnect system power.
4. Install drivers from the ADLINK CD using the Software Installation Guide.
5. Verify installation using the `PCI_SCAN` utility.
Configuration:
- Plug-and-play PCI configuration (no jumpers required).
- Input impedance selectable via solder jumpers (J6, J7).
- Software-configurable input range, trigger mode, and sampling rate.
Mounting Options:
- Standard PCI slot mounting.
- Half-size PCB suitable for compact industrial PCs.
### 7. Performance & Capabilities
Sampling Performance:
- Dual-channel simultaneous sampling at 65 MS/s.
- Single-channel ping-pong mode up to 130 MS/s.
- 14-bit resolution ensures high dynamic range and precision.
Data Throughput:
- Internal SDRAM buffering allows sustained high-speed acquisition.
- Scatter-gather DMA supports large, non-contiguous memory transfers.
- Real-time streaming possible via 3k-sample FIFO when bandwidth allows.
Efficiency & Limitations:
- PCI bus bandwidth (132 MB/s) limits continuous streaming at full rate; onboard memory mitigates this.
- Ping-pong mode available only on CH0.
- External clock must be continuous for stable ADC operation.
Signal Integrity:
- Low distortion (THD -75 dB).
- High SNR (up to 66 dB).
- Crosstalk suppression better than -80 dB.
### 8. Standards & Compliance
Bus Interface:
- PCI Local Bus Specification, Revision 2.2 compliant.
- Universal PCI signaling (3.3 V and 5 V).
Electrical & Safety:
- Overvoltage protection on all analog inputs.
- ESD-sensitive components protected by standard handling procedures.
Environmental Compliance:
- Operating temperature: 0–50°C.
- Storage temperature: -20–80°C.
- Humidity: 5–95% non-condensing.
Certifications:
- CE and FCC Class A (industrial environment).
- RoHS compliant (lead-free manufacturing).
### 9. Additional Information
Warranty:
- Standard 2-year limited warranty from ADLINK Technology.
- Covers defects in materials and workmanship.
- Excludes damage from misuse, improper installation, or environmental factors.
Support & Maintenance:
- Technical support via email: service@adlinktech.com.
- Online resources: [www.adlinktech.com](http://www.adlinktech.com).
- RMA service available with downloadable form from ADLINK website.
Software & Updates:
- WD-DASK: Windows driver library (DLLs for Windows 98/NT/2000).
- WD-DASK/X: Linux shared library driver.
- WD-LVIEW: LabVIEW® driver package (free).
- WD-OCX: ActiveX control library for VB/VC++ integration.
- DAQBench: Optional ActiveX-based visualization and control suite.
Maintenance Recommendations:
- Recalibrate after installation or environmental change.
- Warm-up for 15 minutes before calibration.
- Store in anti-static packaging when not in use.
Ordering Information:
- PCI-9820D/128-0: 2-CH 65 MS/s 14-bit digitizer with 128 MB memory.
- PCI-9820D/512-0: 2-CH 65 MS/s 14-bit digitizer with 512 MB memory (this model).
### Summary
The ADLINK PCI-9820W/512 is a robust, high-resolution PCI digitizer optimized for demanding signal acquisition tasks. Its combination of 14-bit precision, 130 MS/s sampling capability, and deep onboard memory makes it suitable for both laboratory and industrial environments. With flexible triggering, synchronization, and calibration features, it supports complex measurement setups and multi-device configurations. The card’s comprehensive software support ensures seamless integration into custom applications, LabVIEW environments, and automated test systems.
Engineered for reliability and precision, the PCI-9820W/512 delivers consistent performance across a wide range of high-speed data acquisition and waveform analysis applications.
-
05-02.pdf
PDF Catalog
-
PCI-9820_Datasheet_2.pdf
PDF Catalog
-
PCI-9820_Manual_2.pdf
Manual
-
PCI-9820_Manual_1.pdf
Manual
- WD-DASK - Windows driver API for PCI/PXI-9820 and PXI-98xx Digitizer
- SMB-BNC-1m - SMB to BNC cable 1m (PXI-9816/26/46)
