Comprehensive Product Summary – ADLINK PXI‑3930/M8G/SSD

---

### 1. Product Overview

Product Name: PXI‑3930 Embedded PXI Controller
Model: PXI‑3930/M8G/SSD
Series: PXI‑3930 Series (3U PXI Embedded Controllers)
Article Number: PXI‑3930/M8G/SSD
Manufacturer: ADLINK Technology, Inc.
Processor Platform: Intel® Celeron® 2000E (Haswell architecture)
Chipset: Mobile Intel® HM86 Express Chipset
Form Factor: 3U PXI, 3‑slot system controller module

The ADLINK PXI‑3930/M8G/SSD is a compact, high‑reliability embedded PXI controller designed for modular instrumentation and automated test systems. It integrates an Intel® Celeron® 2000E 2.20 GHz dual‑core processor, 8 GB DDR3L memory, and a 240 GB SATA solid‑state drive (SSD). The controller provides a balanced combination of performance, ruggedness, and cost‑efficiency for PXI‑based measurement and control applications.

---

### 2. Key Features

- Intel® Celeron® 2000E 2.20 GHz Processor: Dual‑core Haswell architecture with 5 GT/s DMI bandwidth for efficient multitasking and data throughput.
- PXI‑1 Hardware Specification Rev. 2.2 Compliance: Ensures full compatibility with standard PXI chassis and backplanes.
- High System Throughput: Up to 132 MB/s maximum PXI system data transfer rate.
- Dual‑Display Support: DVI‑I interface supporting simultaneous digital (DVI) and analog (VGA) outputs.
- Flexible I/O Connectivity:
- 2 × USB 3.0 ports for high‑speed peripherals
- 4 × USB 2.0 ports for standard devices and instrument control
- 2 × Gigabit Ethernet ports (Intel® I217 + I210 controllers)
- Integrated IEEE‑488 GPIB controller (Micro‑D 25‑pin)
- Trigger I/O SMB connector for PXI trigger bus routing
- Rugged and Serviceable Design: Easily replaceable CMOS battery, upgradable memory and storage modules.
- Dual BIOS Architecture: Backup BIOS for recovery in case of primary BIOS corruption.
- Programmable Watchdog Timer: Hardware‑based system monitoring and automatic reset on software failure.
- Environmental Robustness: Operational temperature up to 55 °C (SSD configuration), shock and vibration tested.
- Software Support: Windows 7 (32/64‑bit) and Windows XP; drivers for chipset, graphics, Ethernet, GPIB, PXI trigger, WDT, and USB 3.0.

---

### 3. Technical Specifications

Processor & Chipset
- CPU: Intel® Celeron® 2000E, dual‑core, 2.20 GHz
- Architecture: Haswell, 22 nm process
- DMI: 5 GT/s per direction
- Chipset: Mobile Intel® HM86 Express

Memory
- Type: DDR3L SO‑DIMM, 1600 MHz, dual‑channel
- Capacity: Up to 16 GB (2 × 204‑pin sockets)
- Installed: 8 GB DDR3L (non‑ECC, unbuffered)

Storage
- Interface: SATA 3 Gb/s (AHCI supported)
- Standard Drive: 240 GB SATA SSD (2.5 in.)
- Optional: 500 GB HDD or larger

Display
- DVI‑I Output: Up to 1920 × 1200 @ 60 Hz (digital)
- VGA Output: Up to 2048 × 1152 @ 60 Hz (analog)
- Dual Display: Simultaneous DVI + VGA via Y‑cable

I/O Interfaces
- USB: 2 × USB 3.0 (Type A), 4 × USB 2.0 (Type A)
- Ethernet: 2 × RJ‑45 (1 × Intel® I217 PHY, 1 × Intel® I210 Controller)
- Indicators: Speed/Link/Activity LEDs
- GPIB: IEEE‑488 controller, Micro‑D 25‑pin connector
- Data rate: up to 1.5 MB/s
- FIFO: 2 KB read/write buffer
- Supports up to 14 instruments
- Trigger I/O: SMB connector for external trigger routing to/from PXI trigger bus

Mechanical & Environmental
- Dimensions: 60.5 (W) × 128.7 (H) × 213.2 (D) mm (2.38 × 5.07 × 8.39 in.)
- Weight: 0.91 kg
- Slot Requirement: System slot + 2 controller expansion slots (3‑slot 3U PXI)
- Operating Temperature: 0 – 55 °C (SSD) / 0 – 50 °C (HDD)
- Storage Temperature: –20 – 70 °C
- Relative Humidity: 5 – 95 % (non‑condensing)
- Shock: 30 G, half‑sine, 11 ms pulse
- Vibration: Operating 0.21 Grms (5 – 500 Hz, 3 axes); Non‑operating 2.46 Grms

Power Requirements
| Voltage Rail | +3.3 V | +5 V | +12 V | Total Power |
|---------------|--------|------|-------|--------------|
| Max Power (W) | 0.52  | 35  | 1.92  | 37.44  |
| Idle Power (W)| 0.36  | 12.5 | 1.32  | 14.18  |

Compliance & Safety
- EMC/EMI: CE, FCC Class A
- Immunity: EN 61326‑1
- Environmental: RoHS and WEEE compliant

---

### 4. Functionality

The PXI‑3930/M8G/SSD functions as the central processing and control unit in a PXI modular instrumentation system. Installed in the system slot of a PXI chassis, it manages communication between PXI modules via the PCI bus and provides external connectivity for instruments and networks.

Operation & Use Cases
- Automated Test Equipment (ATE): Controls PXI measurement modules, executes test sequences, and logs data.
- Data Acquisition & Control: Interfaces with sensors and actuators through PXI and GPIB instruments.
- Hybrid PXI/LXI Systems: Dual GbE ports allow simultaneous LAN connectivity and LXI instrument control.
- Laboratory Automation: Supports USB‑based instruments and external storage for data management.
- Dual Display Applications: Enables simultaneous monitoring and control interfaces on separate displays.

Compatibility
- PXI‑1 Rev. 2.2 hardware compliant
- Compatible with standard PXI chassis (5 V VIO PCI bus)
- Software drivers available for Windows XP and Windows 7 (32/64‑bit)

---

### 5. Components & Accessories

Included Items
- PXI‑3930/M8G/SSD controller (pre‑installed 8 GB RAM & 240 GB SSD)
- Dual‑display DVI‑I Y‑cable (for DVI + VGA output)
- Quick Start Guide

Optional Accessories
- ACL‑IEEE488‑MD1‑A: 1 m Micro‑D 25‑pin to GPIB cable for instrument connection
- Replacement HDD/SSD modules (2.5 in. SATA)
- Replacement CMOS battery (CR2032 or equivalent)

Front Panel Connectors & Indicators
- A: PXI Trigger SMB jack
- B: LED status indicators (Power, HDD, Watchdog, Health Status)
- C: Reset button (recessed)
- D: DVI‑I connector (for dual display)
- E: 4 × USB 2.0 Type A ports
- F: 2 × USB 3.0 Type A ports
- G: GPIB Micro‑D 25‑pin connector
- H: 2 × RJ‑45 Gigabit Ethernet ports

---

### 6. Installation & Setup

Requirements
- PXI chassis with system slot (5 V VIO PCI bus) and two adjacent expansion slots
- Anti‑static workstation and tools (Phillips screwdriver, ESD strap)

Installation Procedure
1. Power off the PXI chassis and disconnect power.
2. Locate the system controller slot (Slot 1).
3. Align controller edges with chassis guides and insert carefully.
4. Engage the locking latch and secure the faceplate screws.
5. Connect display, Ethernet, USB, and GPIB devices.
6. Power on the chassis and install the operating system and drivers.

Software Installation
- Supported OS: Windows XP / Windows 7 (32/64‑bit)
- Driver sequence: Chipset → Graphics → Ethernet → GPIB → Management Engine → PXI Trigger → Watchdog Timer → USB 3.0

Maintenance Tasks
- Drive Replacement: Remove four mounting screws to replace 2.5 in. SATA HDD/SSD.
- Battery Replacement: Replace 3 V CR2032 cell with positive pole up.
- CMOS Clear: Toggle SW1 to “Clear” for 5 seconds then return to “Normal.”
- Backup BIOS Activation: Automatic switch to secondary BIOS on failure.

---

### 7. Performance & Capabilities

Processing Performance
- Dual‑core Celeron 2000E supports multitasking and parallel instrument control.
- DMI 5 GT/s ensures high bandwidth between CPU and chipset.

Data Throughput
- PXI bus transfer rate up to 132 MB/s.
- GPIB transfer rate up to 1.5 MB/s.
- USB 3.0 supports SuperSpeed (5 Gb/s).

Display Performance
- Dual independent outputs for operator interface and data visualization.

Reliability Features
- Watchdog Timer (WDT) library for system recovery.
- Dual BIOS redundancy for firmware integrity.
- Shock and vibration resistance for industrial environments.

Limitations
- Compatible only with 5 V VIO PXI backplanes (3.3 V VIO not supported).
- Memory above 4 GB requires 64‑bit OS for addressing.
- OS installation via USB CD‑ROM supported, but boot from USB 3.0 CD‑ROM not recommended.

---

### 8. Standards & Compliance

- PXI Standard: PXI‑1 Hardware Specification Rev. 2.2
- Electrical Safety & EMC: EN 61326‑1, FCC Class A
- Environmental Directives: RoHS and WEEE compliant
- Quality & Reliability: Manufactured under ADLINK’s ISO 9001 certified processes
- Operating Environment: Designed for industrial and laboratory use (0 – 55 °C, 95 % RH non‑condensing)

---

### 9. Additional Information

Warranty & Support
- Standard ADLINK limited warranty (coverage varies by region).
- Global technical support via Ask an Expert portal: [http://askanexpert.adlinktech.com](http://askanexpert.adlinktech.com)
- Regional service centers in Taiwan, USA, China, Europe, Japan, Korea, Singapore, India, and Israel.

Maintenance & Serviceability
- User‑replaceable storage and battery modules.
- BIOS and firmware updates available from ADLINK website.
- Recommended preventive maintenance: periodic dust removal and connector inspection.

Environmental Responsibility
- Designed for minimal environmental impact; compliant with EU RoHS and WEEE directives.
- Customers encouraged to dispose of end‑of‑life units through authorized recycling channels.

Documentation & Revision History
- User’s Manual Rev. 2.00 (July 13, 2016), Part No. 50‑17051‑1000.
- Specifications subject to change without notice.

---

### Summary

The ADLINK PXI‑3930/M8G/SSD is a robust, entry‑level PXI embedded controller optimized for cost‑effective test and measurement systems. Combining an Intel® Celeron® 2000E 2.2 GHz CPU, 8 GB DDR3L RAM, and 240 GB SSD storage, it delivers reliable performance for instrument control, data acquisition, and automation applications. Its comprehensive I/O suite — including dual Gigabit Ethernet, six USB ports, integrated GPIB, and dual display support — ensures seamless integration with PXI and LXI devices. With rugged mechanical design, dual BIOS redundancy, and broad software support, the PXI‑3930/M8G/SSD provides a stable and serviceable platform for industrial and laboratory test environments.