WD-DASK
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- High-Resolution Digitization: 16-bit ADC resolution across four simultaneous single-ended channels.
- Sampling Rate: Up to 10 MS/s per channel (PXI-9816D model).
- Deep Onboard Memory: 512 MB SDRAM shared across four channels, enabling long-duration waveform recording independent of PCI/PXI bus transfer rates.
- Programmable Input Range: Software-selectable ±0.2 V or ±1 V input ranges for optimal dynamic range and signal fidelity.
- Selectable Input Impedance: Software-configurable 50 Ω or 1 MΩ input impedance for flexible signal interfacing.
- Flexible Triggering: Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-, and re-trigger).
- Synchronization: Multi-module synchronization via PXI Trigger Bus or SSI interface for scalable, time-aligned data acquisition systems.
- Auto-Calibration: Built-in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration and long-term accuracy.
- High Dynamic Performance: Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits.
- PXI 3U Eurocard Form Factor: Compact 160 mm × 100 mm module compatible with standard PXI chassis.
- Software Support: Comprehensive driver suite including DAQPilot, DAQMaster, and WD-DASK for Windows, LabVIEW®, and MATLAB® environments.
- Sampling Rate: Up to 10 MS/s per channel (PXI-9816D model).
- Deep Onboard Memory: 512 MB SDRAM shared across four channels, enabling long-duration waveform recording independent of PCI/PXI bus transfer rates.
- Programmable Input Range: Software-selectable ±0.2 V or ±1 V input ranges for optimal dynamic range and signal fidelity.
- Selectable Input Impedance: Software-configurable 50 Ω or 1 MΩ input impedance for flexible signal interfacing.
- Flexible Triggering: Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-, and re-trigger).
- Synchronization: Multi-module synchronization via PXI Trigger Bus or SSI interface for scalable, time-aligned data acquisition systems.
- Auto-Calibration: Built-in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration and long-term accuracy.
- High Dynamic Performance: Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits.
- PXI 3U Eurocard Form Factor: Compact 160 mm × 100 mm module compatible with standard PXI chassis.
- Software Support: Comprehensive driver suite including DAQPilot, DAQMaster, and WD-DASK for Windows, LabVIEW®, and MATLAB® environments.
Comprehensive Product Summary – ADLINK PXI-9816D/512 PXI AD Digitizer Card
### 1. Product Overview
Product Name: PXI AD Digitizer Card
Model: PXI-9816D/512
Series: PCI/PXI-9816/26/46 Digitizer Series
Article Number: PXI-9816D/512
Manufacturer: ADLINK Technology Inc.
Part Number: 50-17031-1020
Manual Revision: 2.02 (October 5, 2010)
The ADLINK PXI-9816D/512 is a high-performance 4-channel, 16-bit PXI analog-to-digital (AD) digitizer card designed for high-speed data acquisition and waveform digitization. It belongs to ADLINK’s PXI-98x6 series, which includes the PXI-9816 (10 MS/s), PXI-9826 (20 MS/s), and PXI-9846 (40 MS/s) models. The PXI-9816D/512 variant provides a maximum sampling rate of 10 MS/s per channel, ±0.2 V/±1 V programmable input range, and 512 MB of onboard SDRAM memory for extended waveform capture.
### 2. Key Features
- High-Resolution Digitization: 16-bit ADC resolution across four simultaneous single-ended channels.
- Sampling Rate: Up to 10 MS/s per channel (PXI-9816D model).
- Deep Onboard Memory: 512 MB SDRAM shared across four channels, enabling long-duration waveform recording independent of PCI/PXI bus transfer rates.
- Programmable Input Range: Software-selectable ±0.2 V or ±1 V input ranges for optimal dynamic range and signal fidelity.
- Selectable Input Impedance: Software-configurable 50 Ω or 1 MΩ input impedance for flexible signal interfacing.
- Flexible Triggering: Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-, and re-trigger).
- Synchronization: Multi-module synchronization via PXI Trigger Bus or SSI interface for scalable, time-aligned data acquisition systems.
- Auto-Calibration: Built-in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration and long-term accuracy.
- High Dynamic Performance: Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits.
- PXI 3U Eurocard Form Factor: Compact 160 mm × 100 mm module compatible with standard PXI chassis.
- Software Support: Comprehensive driver suite including DAQPilot, DAQMaster, and WD-DASK for Windows, LabVIEW®, and MATLAB® environments.
### 3. Technical Specifications
Analog Input
- Channels: 4 single-ended
- Connector Type: BNC
- Input Impedance: 50 Ω or 1 MΩ (software selectable, default 50 Ω)
- Input Coupling: DC
- Input Range: ±0.2 V or ±1 V (software selectable)
- Overvoltage Protection: ±5 V for ±0.2 V/±1 V ranges
- ADC Resolution: 16-bit (1 in 65,536)
- Crosstalk: ≤ –80 dB at 1 MHz (50 Ω input)
Accuracy
- Offset Error: ±0.2 mV
- Gain Error: ±0.1% (±0.2 V range), ±0.05% (±1 V range)
Bandwidth (–3 dB, typical)
- PXI-9816D: 5.1 MHz
- PXI-9826D: 9.6 MHz
- PXI-9846D: 20 MHz
System Noise (50 Ω input)
- ±0.2 V range: 5 LSB RMS
- ±1 V range: 3 LSB RMS
Spectral Characteristics (PXI-9816D)
- SINAD: 79.11 dBc (±1 V), 75.93 dBc (±0.2 V)
- SNR: 79.36 dBc (±1 V), 75.96 dBc (±0.2 V)
- THD: –89.9 dBc (±1 V), –95.77 dBc (±0.2 V)
- SFDR: 90.37 dBc (±1 V), 98.65 dBc (±0.2 V)
- ENOB: 12.85 bits (±1 V), 12.32 bits (±0.2 V)
Timebase and Sampling
- Internal Oscillator: 10 MHz (±25 ppm stability)
- External Clock Input: SMB connector, 50 Ω AC-coupled, 1–2 V p-p sine/square wave
- Sampling Rate Range: 10 MS/s to 0.596 S/s (24-bit divider)
- External Clock Sources: CLK IN, PXI STAR, PXI Trigger Bus[0..7], PXI 10 MHz, SSI bus
Triggering
- Sources: Software, TRG IO (SMB), analog (CH0–CH3), PXI STAR, PXI Trigger Bus[0..7], SSI bus
- Modes: Pre-, Post-, Middle-, Delay-, and Re-trigger
- TRG IO Input: 3.3 V LVTTL (5 V tolerant), VIH ≥ 2.0 V, VIL ≤ 0.8 V, pulse width ≥ 20 ns
- TRG IO Output: 3.3 V TTL, VOH ≥ 2.4 V, VOL ≤ 0.2 V, 8 mA drive
- Analog Trigger: 8-bit resolution, full-scale range, rising/falling slope selectable
Data Storage and Transfer
- Onboard Memory: 512 MB SDRAM shared across channels
- Transfer Mode: Scatter-gather DMA
Onboard Reference
- Reference Voltage: 5 V
- Temperature Drift: ±3 ppm/°C
- Warm-up Time: 15 minutes
Physical and Environmental
- PXI Form Factor: 3U Eurocard, 160 mm × 100 mm
- Weight: Approx. 0.5 kg (typical)
- Operating Temperature: 0 °C – 55 °C (PXI)
- Storage Temperature: –20 °C – 85 °C
- Humidity: 10 % – 90 % RH, non-condensing
- Power Requirements: +12 V @ 0.3 A, +5 V @ 1.4 A, +3.3 V @ 0.8 A (≈ 13.2 W total)
Compliance
- Emission: EN 55022
- Immunity: EN 55024
### 4. Functionality
The PXI-9816D/512 digitizer converts analog input signals into high-resolution digital data for analysis, storage, or real-time processing. Each of the four channels operates simultaneously, ensuring phase alignment across inputs. The onboard 16-bit ADCs sample signals up to 10 MS/s per channel, with data temporarily stored in the 512 MB SDRAM buffer before being transferred to the host system via DMA.
Use Cases and Applications:
- Software-defined radio and wireless communication testing
- Radar, sonar, and lidar signal acquisition
- Ultrasound and medical imaging systems
- Scientific research and laboratory instrumentation
- Military and defense signal analysis
Compatibility:
- PXI chassis conforming to PXI 3U Eurocard standards
- Software environments: Windows (DAQPilot, DAQMaster, WD-DASK), LabVIEW®, MATLAB®
### 5. Components & Accessories
Included Items:
- PXI-9816D/512 digitizer module
- ADLINK All-in-One software CD
- Software installation guide
- User’s manual
Front Panel Connectors:
- CH0–CH3: BNC connectors for analog input signals
- TRG IO: SMB connector for external digital trigger input/output
- CLK IN: SMB connector for external clock input
Optional Accessories:
- ACL-SSI-2/3/4 synchronization cables for multi-module operation
- PXI chassis and controller modules
- Shielded BNC cables and adapters
### 6. Installation & Setup
Requirements:
- PXI chassis with available 3U slot
- Anti-static workstation and wrist strap for ESD protection
- Phillips and flat-head screwdrivers
Installation Steps:
1. Power off the PXI chassis and disconnect power.
2. Align the module with the PXI card guide and insert until the connector engages.
3. Secure the front panel screw.
4. Power on the chassis and verify module recognition via DAQMaster.
Software Setup:
- Install DAQPilot or WD-DASK drivers from the ADLINK All-in-One CD.
- Configure device parameters using DAQMaster or programmatically via SDK.
- Verify operation using sample applications or LabVIEW/MATLAB integration.
### 7. Performance & Capabilities
Speed and Throughput:
- Maximum sampling rate: 10 MS/s per channel
- Data throughput: up to 80 MB/s (aggregate)
- Scatter-gather DMA ensures efficient host transfer without memory fragmentation
Capacity:
- 512 MB onboard SDRAM allows extended waveform capture independent of bus bandwidth
Efficiency:
- Simultaneous sampling across all channels ensures time-coherent data
- Auto-calibration maintains accuracy over temperature variations
Limitations:
- Input bandwidth limited to 5.1 MHz (–3 dB)
- External clock must be continuous for stable ADC operation
- PXI synchronization features not available in CompactPCI systems
### 8. Standards & Compliance
- PXI Specification: Compliant with PXI 3U Eurocard mechanical and electrical standards
- PCI Interface: 32-bit, 66 MHz, 3.3 V/5 V signaling support
- EMC Compliance: EN 55022 (emission), EN 55024 (immunity)
- Safety: Designed for operation within 0–55 °C ambient, 10–90 % RH non-condensing
- Calibration Reference: Internal 5 V precision source with ±3 ppm/°C drift
- Environmental: RoHS-compliant manufacturing (where applicable)
### 9. Additional Information
Warranty & Support:
ADLINK provides standard warranty coverage for manufacturing defects and hardware reliability. Technical support is available through regional offices worldwide, including Taiwan, USA, China, Europe, Japan, Korea, Singapore, and India.
Maintenance:
- Perform periodic calibration using the onboard reference or external standards.
- Keep connectors clean and free from dust or oxidation.
- Avoid exposure to excessive humidity or vibration.
Software Updates:
- Firmware and driver updates are available via ADLINK’s official website.
- DAQPilot and DAQMaster provide automatic device recognition and configuration updates.
Contact Information:
- ADLINK Technology, Inc. – Taipei, Taiwan
Tel: +886-2-8226-5877 | Email: service@adlinktech.com
- ADLINK Technology (USA): San Jose, CA | Tel: +1-408-360-0200
- ADLINK Technology (Europe): Düsseldorf, Germany | Tel: +49-211-495-5552
- ADLINK Technology (China): Shanghai, Beijing, Shenzhen offices
- ADLINK Technology Japan Corporation: Tokyo, Japan
- ADLINK Technology Singapore Pte. Ltd.: Singapore and India liaison offices
### Summary
The ADLINK PXI-9816D/512 is a precision 4-channel, 16-bit PXI digitizer optimized for high-speed, high-fidelity signal acquisition in demanding test and measurement environments. With its 10 MS/s sampling rate, 512 MB onboard memory, flexible triggering, and synchronization capabilities, it is ideally suited for radar, communications, and scientific research applications. The combination of robust hardware design, comprehensive software support, and PXI system compatibility makes it a versatile and reliable component for modular instrumentation systems.
### 1. Product Overview
Product Name: PXI AD Digitizer Card
Model: PXI-9816D/512
Series: PCI/PXI-9816/26/46 Digitizer Series
Article Number: PXI-9816D/512
Manufacturer: ADLINK Technology Inc.
Part Number: 50-17031-1020
Manual Revision: 2.02 (October 5, 2010)
The ADLINK PXI-9816D/512 is a high-performance 4-channel, 16-bit PXI analog-to-digital (AD) digitizer card designed for high-speed data acquisition and waveform digitization. It belongs to ADLINK’s PXI-98x6 series, which includes the PXI-9816 (10 MS/s), PXI-9826 (20 MS/s), and PXI-9846 (40 MS/s) models. The PXI-9816D/512 variant provides a maximum sampling rate of 10 MS/s per channel, ±0.2 V/±1 V programmable input range, and 512 MB of onboard SDRAM memory for extended waveform capture.
### 2. Key Features
- High-Resolution Digitization: 16-bit ADC resolution across four simultaneous single-ended channels.
- Sampling Rate: Up to 10 MS/s per channel (PXI-9816D model).
- Deep Onboard Memory: 512 MB SDRAM shared across four channels, enabling long-duration waveform recording independent of PCI/PXI bus transfer rates.
- Programmable Input Range: Software-selectable ±0.2 V or ±1 V input ranges for optimal dynamic range and signal fidelity.
- Selectable Input Impedance: Software-configurable 50 Ω or 1 MΩ input impedance for flexible signal interfacing.
- Flexible Triggering: Supports software, external digital, analog, PXI STAR, and PXI Trigger Bus triggers with multiple trigger modes (pre-, post-, middle-, delay-, and re-trigger).
- Synchronization: Multi-module synchronization via PXI Trigger Bus or SSI interface for scalable, time-aligned data acquisition systems.
- Auto-Calibration: Built-in precision 5 V reference with ±3 ppm/°C drift for fully automated calibration and long-term accuracy.
- High Dynamic Performance: Typical SFDR of 90 dBc, SINAD of 79 dBc, and ENOB of 12.8 bits.
- PXI 3U Eurocard Form Factor: Compact 160 mm × 100 mm module compatible with standard PXI chassis.
- Software Support: Comprehensive driver suite including DAQPilot, DAQMaster, and WD-DASK for Windows, LabVIEW®, and MATLAB® environments.
### 3. Technical Specifications
Analog Input
- Channels: 4 single-ended
- Connector Type: BNC
- Input Impedance: 50 Ω or 1 MΩ (software selectable, default 50 Ω)
- Input Coupling: DC
- Input Range: ±0.2 V or ±1 V (software selectable)
- Overvoltage Protection: ±5 V for ±0.2 V/±1 V ranges
- ADC Resolution: 16-bit (1 in 65,536)
- Crosstalk: ≤ –80 dB at 1 MHz (50 Ω input)
Accuracy
- Offset Error: ±0.2 mV
- Gain Error: ±0.1% (±0.2 V range), ±0.05% (±1 V range)
Bandwidth (–3 dB, typical)
- PXI-9816D: 5.1 MHz
- PXI-9826D: 9.6 MHz
- PXI-9846D: 20 MHz
System Noise (50 Ω input)
- ±0.2 V range: 5 LSB RMS
- ±1 V range: 3 LSB RMS
Spectral Characteristics (PXI-9816D)
- SINAD: 79.11 dBc (±1 V), 75.93 dBc (±0.2 V)
- SNR: 79.36 dBc (±1 V), 75.96 dBc (±0.2 V)
- THD: –89.9 dBc (±1 V), –95.77 dBc (±0.2 V)
- SFDR: 90.37 dBc (±1 V), 98.65 dBc (±0.2 V)
- ENOB: 12.85 bits (±1 V), 12.32 bits (±0.2 V)
Timebase and Sampling
- Internal Oscillator: 10 MHz (±25 ppm stability)
- External Clock Input: SMB connector, 50 Ω AC-coupled, 1–2 V p-p sine/square wave
- Sampling Rate Range: 10 MS/s to 0.596 S/s (24-bit divider)
- External Clock Sources: CLK IN, PXI STAR, PXI Trigger Bus[0..7], PXI 10 MHz, SSI bus
Triggering
- Sources: Software, TRG IO (SMB), analog (CH0–CH3), PXI STAR, PXI Trigger Bus[0..7], SSI bus
- Modes: Pre-, Post-, Middle-, Delay-, and Re-trigger
- TRG IO Input: 3.3 V LVTTL (5 V tolerant), VIH ≥ 2.0 V, VIL ≤ 0.8 V, pulse width ≥ 20 ns
- TRG IO Output: 3.3 V TTL, VOH ≥ 2.4 V, VOL ≤ 0.2 V, 8 mA drive
- Analog Trigger: 8-bit resolution, full-scale range, rising/falling slope selectable
Data Storage and Transfer
- Onboard Memory: 512 MB SDRAM shared across channels
- Transfer Mode: Scatter-gather DMA
Onboard Reference
- Reference Voltage: 5 V
- Temperature Drift: ±3 ppm/°C
- Warm-up Time: 15 minutes
Physical and Environmental
- PXI Form Factor: 3U Eurocard, 160 mm × 100 mm
- Weight: Approx. 0.5 kg (typical)
- Operating Temperature: 0 °C – 55 °C (PXI)
- Storage Temperature: –20 °C – 85 °C
- Humidity: 10 % – 90 % RH, non-condensing
- Power Requirements: +12 V @ 0.3 A, +5 V @ 1.4 A, +3.3 V @ 0.8 A (≈ 13.2 W total)
Compliance
- Emission: EN 55022
- Immunity: EN 55024
### 4. Functionality
The PXI-9816D/512 digitizer converts analog input signals into high-resolution digital data for analysis, storage, or real-time processing. Each of the four channels operates simultaneously, ensuring phase alignment across inputs. The onboard 16-bit ADCs sample signals up to 10 MS/s per channel, with data temporarily stored in the 512 MB SDRAM buffer before being transferred to the host system via DMA.
Use Cases and Applications:
- Software-defined radio and wireless communication testing
- Radar, sonar, and lidar signal acquisition
- Ultrasound and medical imaging systems
- Scientific research and laboratory instrumentation
- Military and defense signal analysis
Compatibility:
- PXI chassis conforming to PXI 3U Eurocard standards
- Software environments: Windows (DAQPilot, DAQMaster, WD-DASK), LabVIEW®, MATLAB®
### 5. Components & Accessories
Included Items:
- PXI-9816D/512 digitizer module
- ADLINK All-in-One software CD
- Software installation guide
- User’s manual
Front Panel Connectors:
- CH0–CH3: BNC connectors for analog input signals
- TRG IO: SMB connector for external digital trigger input/output
- CLK IN: SMB connector for external clock input
Optional Accessories:
- ACL-SSI-2/3/4 synchronization cables for multi-module operation
- PXI chassis and controller modules
- Shielded BNC cables and adapters
### 6. Installation & Setup
Requirements:
- PXI chassis with available 3U slot
- Anti-static workstation and wrist strap for ESD protection
- Phillips and flat-head screwdrivers
Installation Steps:
1. Power off the PXI chassis and disconnect power.
2. Align the module with the PXI card guide and insert until the connector engages.
3. Secure the front panel screw.
4. Power on the chassis and verify module recognition via DAQMaster.
Software Setup:
- Install DAQPilot or WD-DASK drivers from the ADLINK All-in-One CD.
- Configure device parameters using DAQMaster or programmatically via SDK.
- Verify operation using sample applications or LabVIEW/MATLAB integration.
### 7. Performance & Capabilities
Speed and Throughput:
- Maximum sampling rate: 10 MS/s per channel
- Data throughput: up to 80 MB/s (aggregate)
- Scatter-gather DMA ensures efficient host transfer without memory fragmentation
Capacity:
- 512 MB onboard SDRAM allows extended waveform capture independent of bus bandwidth
Efficiency:
- Simultaneous sampling across all channels ensures time-coherent data
- Auto-calibration maintains accuracy over temperature variations
Limitations:
- Input bandwidth limited to 5.1 MHz (–3 dB)
- External clock must be continuous for stable ADC operation
- PXI synchronization features not available in CompactPCI systems
### 8. Standards & Compliance
- PXI Specification: Compliant with PXI 3U Eurocard mechanical and electrical standards
- PCI Interface: 32-bit, 66 MHz, 3.3 V/5 V signaling support
- EMC Compliance: EN 55022 (emission), EN 55024 (immunity)
- Safety: Designed for operation within 0–55 °C ambient, 10–90 % RH non-condensing
- Calibration Reference: Internal 5 V precision source with ±3 ppm/°C drift
- Environmental: RoHS-compliant manufacturing (where applicable)
### 9. Additional Information
Warranty & Support:
ADLINK provides standard warranty coverage for manufacturing defects and hardware reliability. Technical support is available through regional offices worldwide, including Taiwan, USA, China, Europe, Japan, Korea, Singapore, and India.
Maintenance:
- Perform periodic calibration using the onboard reference or external standards.
- Keep connectors clean and free from dust or oxidation.
- Avoid exposure to excessive humidity or vibration.
Software Updates:
- Firmware and driver updates are available via ADLINK’s official website.
- DAQPilot and DAQMaster provide automatic device recognition and configuration updates.
Contact Information:
- ADLINK Technology, Inc. – Taipei, Taiwan
Tel: +886-2-8226-5877 | Email: service@adlinktech.com
- ADLINK Technology (USA): San Jose, CA | Tel: +1-408-360-0200
- ADLINK Technology (Europe): Düsseldorf, Germany | Tel: +49-211-495-5552
- ADLINK Technology (China): Shanghai, Beijing, Shenzhen offices
- ADLINK Technology Japan Corporation: Tokyo, Japan
- ADLINK Technology Singapore Pte. Ltd.: Singapore and India liaison offices
### Summary
The ADLINK PXI-9816D/512 is a precision 4-channel, 16-bit PXI digitizer optimized for high-speed, high-fidelity signal acquisition in demanding test and measurement environments. With its 10 MS/s sampling rate, 512 MB onboard memory, flexible triggering, and synchronization capabilities, it is ideally suited for radar, communications, and scientific research applications. The combination of robust hardware design, comprehensive software support, and PXI system compatibility makes it a versatile and reliable component for modular instrumentation systems.
-
PXI-9816+9826+9846_Datasheet_4.pdf
PDF Catalog
- WD-DASK - Windows driver API for PCI/PXI-9820 and PXI-98xx Digitizer
- SMB-SMB-1m - SMB to SMB cable 1m (PCIe-7350)
- SMB-BNC-1m - SMB to BNC cable 1m (PXI-9816/26/46)
