EX-9510AH repeater boosts the RS-422(EX9510A)/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128, with a special circuitry, EX-9510/A is able to automatically detect the data flow and switch the direction of the data lines accordingly, “Auto baud rate detector” enables EX-9510/A to automatically configure RS-422(EX9510A)/485 signals to any baud rate without external switch setting, build in Opto-isolations on EX-9510/A provides 3000VDC of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422(EX9510A)/485 data lines, EX-9510 also offers internal surge-protection on the data lines, Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes, Features:, automatic internal RS-422(EX9510A)/485 bus supervision, No external flow control signals required for RS-485, Minimum 3000VDC isolation protection, Transient suppression on RS-485 data lines, Supported baud rate up to 115.2Kbps, Reach distance up to 4000 feet (1200m), Reserved space for termination resistors (R8,R9), Power and data flow indicator for troubleshooting, Power requirement: +10V to +30VDC, Mounts easily on DIN-rail or panel, Specifications:, Power requirement: Unregulated +10 to +30VDC with protection from power reversals, Case: ABS with captive mounting hardware, Accessories (Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket, Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires, Supported baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K, Isolation voltage: 3000VDC, RS-422/RS-485 connector: plug-in screw terminal, Power consumption: 2.2W, Operating temperature: -25?~75?, Storage temperature: -40?~85?, Humidity: 5~95%, non-condensing

Manufacturer: TOPSCCC

Category: Repeater RS485

EX-9510/A repeater boosts the RS-422(EX9510A)/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128, with a special circuitry, EX-9510/A is able to automatically detect the data flow and switch the direction of the data lines accordingly, “Auto baud rate detector” enables EX-9510/A to automatically configure RS-422(EX9510A)/485 signals to any baud rate without external switch setting, build in Opto-isolations on EX-9510/A provides 3000VDC of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422(EX9510A)/485 data lines, EX-9510 also offers internal surge-protection on the data lines, Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes, Features:, automatic internal RS-422(EX9510A)/485 bus supervision, No external flow control signals required for RS-485, Minimum 3000VDC isolation protection, Transient suppression on RS-485 data lines, Supported baud rate up to 115.2Kbps, Reach distance up to 4000 feet (1200m), Reserved space for termination resistors (R8,R9), Power and data flow indicator for troubleshooting, Power requirement: +10V to +30VDC, Mounts easily on DIN-rail or panel, Specifications:, Power requirement: Unregulated +10 to +30VDC with protection from power reversals, Case: ABS with captive mounting hardware, Accessories (Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket, Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires, Supported baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K, Isolation voltage: 3000VDC, RS-422/RS-485 connector: plug-in screw terminal, Power consumption: 2.2W, Operating temperature: -25?~75?, Storage temperature: -40?~85?, Humidity: 5~95%, non-condensing

Manufacturer: TOPSCCC

Category: Repeater RS485

- **RS-232 to RS-485 Conversion:** Seamlessly converts RS-232 signals to RS-485 differential signals, allowing communication between devices using different serial standards. - **Galvanic Isolation:** The RS-232 input is electrically isolated, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Intelligent direction control automatically manages data transmission and reception on the RS-485 bus without requiring manual RTS signal handling. - **Extended Communication Range:** Supports transmission distances up to **1200 meters (3937 feet)** over RS-485 cabling. - **Network Expansion Capability:** When used with the Autopro EX9510 RS-485 repeater, the communication range can be extended by an additional 1200 meters per segment. - **Multi-Drop Network Support:** Enables control and communication with up to **256 devices** on a single RS-485 network. - **Extended Temperature Operation:** Designed for industrial environments with an operating temperature range of **–25°C to +75°C**. - **Flexible Power Options:** - Standard EX9520: **10 VDC to 30 VDC** power input range. - EX9520+: **9 VDC to 48 VDC** extended power input range for broader compatibility with industrial power systems. - **Mounting Flexibility:** Includes both **DIN rail (cap-rail)** and **wall-mount** options for versatile installation in control cabinets or field enclosures. - **RS-232 Bridge Functionality:** Two EX9520 units can be paired to create an RS-232 bridge over an RS-485 link, extending RS-232 communication distance from a few meters to up to 1200 meters. - **Industrial-Grade Design:** Rugged construction suitable for harsh environments, ensuring stable operation under vibration, temperature variation, and electrical interference.

Manufacturer: TOPSCCC

Category: Converter

- **RS-232 to RS-422/RS-485 Conversion:** Enables seamless communication between RS-232 devices and RS-422/RS-485 networks. - **Galvanic Isolation:** The RS-232 input is isolated to protect connected equipment from ground loops, voltage spikes, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically recognizes and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of serial devices. - **Auto Flow Control:** Intelligent direction control automatically manages data transmission and reception without requiring additional handshaking signals. - **Full-Duplex RS-422 Support:** Allows simultaneous two-way communication for RS-422 networks, improving data throughput and reliability. - **Extended Temperature Range:** Designed for industrial environments, the EX9520A operates reliably between **-25°C and +75°C**, ensuring stable performance in both indoor and outdoor installations. - **Long-Distance Communication:** Supports data transmission distances up to **1200 meters** over RS-485 networks, significantly extending the communication range compared to standard RS-232 connections. - **Flexible Mounting Options:** Includes both **DIN rail (cap-rail)** and **wall-mount** brackets, allowing versatile installation in control cabinets or on flat surfaces. - **Optional Power Range Variant:** The EX9520A+ model variant supports a wider power input range of **9–48 VDC**, compared to the EX9520A’s **10–30 VDC** input range. - **Network Expansion Capability:** Can be used in conjunction with RS-485 repeaters to further extend network range or to create RS-232 bridges over RS-485 links. - **Industrial-Grade Design:** Rugged construction suitable for harsh environments, ensuring long-term reliability and minimal maintenance.

Manufacturer: TOPSCCC

Category: Converter

- **RS-232 to RS-422/RS-485 Conversion:** Enables seamless communication between RS-232 devices (such as PCs, PLCs, or controllers) and RS-422/RS-485 networks. - **Electrical Isolation:** The RS-422/RS-485 interface is fully isolated from the RS-232 side, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adapts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Intelligent direction control automatically manages data flow between transmit and receive modes, eliminating the need for manual configuration or software-based control signals. - **Extended Communication Range:** Supports data transmission distances up to **1200 meters** over RS-485 networks, significantly extending the reach of serial communication compared to standard RS-232 connections. - **Multi-Drop Network Capability:** In RS-485 mode, the converter allows connection and control of up to **256 devices** on a single network bus. - **Flexible Power Options:** Standard model operates from **10V to 30V DC**, while the **EX9520AR+** variant supports a wider input range of **9V to 48V DC** for enhanced installation flexibility. - **Extended Temperature Range:** Designed for industrial environments with an operating temperature range of **–25°C to +75°C**, ensuring stable performance in harsh conditions. - **Mounting Options:** Includes both **DIN rail (cap-rail)** and **wall-mount** brackets for versatile installation in control cabinets or equipment enclosures. - **Bridge Functionality:** Two EX9520AR units can be used to create an **RS-232 bridge** over an RS-485 link, extending RS-232 communication distances up to 1200 meters. - **Network Expansion:** Compatible with RS-485 repeaters for further extending network range or segmenting large installations.

Manufacturer: TOPSCCC

Category: Converter

- **RS-232 to RS-485 Conversion:** Enables direct communication between RS-232 devices (e.g., PCs, PLCs, controllers) and RS-485 networks. - **Isolated RS-422/RS-485 Interface:** Provides electrical isolation between RS-232 and RS-485 sides, protecting connected equipment from ground loops, surges, and electrical noise. - **Automatic Baud Rate Detection:** The converter automatically detects and adjusts to the baud rate of the connected RS-232 device, simplifying setup and ensuring compatibility with a wide range of communication speeds. - **Auto Flow Control:** Supports automatic direction control for RS-485 data transmission, eliminating the need for manual RTS signal handling. - **Extended Communication Range:** Supports RS-485 communication distances up to 1200 meters (approximately 4000 feet), allowing long-distance data transmission in industrial networks. - **High Device Capacity:** Enables control and communication with up to 256 devices on a single RS-485 bus. - **Extended Temperature Range:** Designed for operation in harsh environments, with a temperature range from -25°C to +75°C. - **Flexible Power Options:** Standard EX9520R operates on 10–30 VDC; the EX9520R+ variant supports a wider input range of 9–48 VDC for enhanced flexibility. - **Mounting Flexibility:** Includes both DIN rail (cap-rail) and wall-mounting options for easy installation in control cabinets or equipment enclosures. - **Network Expansion Capability:** Can be used with RS-485 repeaters to extend network range or with a second converter to create an RS-232 bridge over RS-485. - **Industrial-Grade Reliability:** Built for continuous operation in automation, process control, and data acquisition systems.

Manufacturer: TOPSCCC

Category: Converter

- **Triple Interface Support:** Provides one serial port configurable as RS-232, RS-422, or RS-485 without jumpers (auto-switching). - **Full-Duplex RS-232/RS-422:** Supports simultaneous two-way communication for high-performance data exchange. - **RS-232 Handshake Signals:** Includes RTS (Request to Send) and CTS (Clear to Send) lines for hardware flow control. - **Automatic Direction Control:** RS-485 communication direction is automatically managed by the converter, eliminating the need for software control. - **High Isolation Protection:** 3000 VDC optical isolation between USB and serial interfaces protects against ground loops and voltage spikes. - **Transient Surge Protection:** Built-in high-speed transient suppressors safeguard data lines from electrical surges. - **Automatic Baud Rate Detection:** Supports baud rates from 300 bps up to 115.2 Kbps with automatic detection and configuration. - **Wide Operating Temperature Range:** Reliable operation from -25°C to +75°C, suitable for industrial environments. - **Extended Communication Range:** RS-422/RS-485 communication distance up to 1200 meters (1.2 km). - **Driver Compatibility:** Native driver support for Windows 95/98/ME/2000/XP/10 and Linux operating systems. - **Self-Powered via USB:** Draws power directly from the USB bus, requiring no external power supply. - **Status Indicators:** Power and data flow LEDs for easy troubleshooting and monitoring. - **Flexible Mounting Options:** Includes DIN-rail and panel mounting accessories for versatile installation. - **Compact and Durable Design:** Housed in an ABS enclosure with captive mounting hardware for secure industrial deployment.

Manufacturer: TOPSCCC

Category: USB Converter

- **Dual Protocol Support:** Fully supports both RS-422 (full-duplex) and RS-485 (half-duplex) communication standards. - **Automatic Configuration:** Jumperless auto-switching between RS-422 and RS-485 modes, simplifying setup and reducing configuration errors. - **Hardware Handshake:** RS-422 mode supports RTS (Request to Send) and CTS (Clear to Send) handshake signals for reliable data flow control. - **Optical Isolation:** Provides 3000 VDC isolation between USB and serial interfaces, protecting the host system from ground loops and voltage spikes. - **Surge Protection:** Integrated transient suppressors safeguard data lines from high-voltage transients and electrostatic discharge. - **Automatic Baud Rate Detection:** Supports baud rates from 300 bps up to 115.2 Kbps with automatic detection and configuration. - **Auto Direction Flow Control:** Automatically manages data direction in RS-485 mode, ensuring transparent operation for half-duplex communication. - **Wide Temperature Range:** Operates reliably from -25°C to +75°C, suitable for harsh industrial environments. - **Power and Data Indicators:** LED indicators for power and data transmission/reception simplify troubleshooting and monitoring. - **DIN-Rail and Panel Mounting:** Includes mounting accessories for flexible installation in control cabinets or on panels. - **Driver Compatibility:** Supports Windows 95/98/ME/2000/XP and Linux operating systems. - **Self-Powered:** Draws power directly from the USB bus, eliminating the need for an external power supply.

Manufacturer: TOPSCCC

Category: USB Converter