- **High‑Performance Managed Switching:** Eight‑port managed switch with 6×10/100Base‑T(X) RJ‑45 ports and 2×100Base‑FX multimode SC fiber ports. - **Ultra‑Fast Redundant Ethernet Ring:** ORing’s proprietary O‑Ring technology provides recovery times under 10 ms across up to 250 connected units, ensuring near‑instantaneous network self‑healing. - **Comprehensive Redundancy Protocols:** Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for flexible redundancy topologies. - **Advanced Network Management:** Managed via Web GUI, Telnet, Console (RS‑232), CLI, SNMP v1/v2c/v3, and ORing’s Open‑Vision software for centralized monitoring. - **Robust Industrial Design:** IP‑30 metal enclosure, DIN‑rail or wall‑mount installation, triple redundant 12–48 V DC power inputs, and extended ‑40 °C to +70 °C operating range. - **Enhanced Security:** 802.1X port‑based authentication, MAC‑based port security, IP access control, SNMPv3 encryption, and RADIUS centralized authentication. - **Comprehensive VLAN and QoS Support:** IEEE 802.1Q VLAN tagging, GVRP, QinQ, and 802.1p QoS with four priority queues for deterministic traffic handling. - **Event and Alarm Management:** Fault relay output, alarm LED, e‑mail and SNMP trap notifications, and system log (SYSLOG) for proactive fault detection. - **Flexible Configuration and Diagnostics:** Web‑based configuration, firmware upgrade via TFTP, backup/restore, port mirroring, rate limiting, and extensive diagnostic tools. - **High Immunity and Reliability:** ESD protection 4 kV DC on Ethernet ports, surge protection 2 kV DC on power inputs, and compliance with IEC 60068 shock/vibration standards.

Manufacturer: Oring

Category: 100Mb Switches

- **High‑Performance Industrial Ethernet:** Supports 6×10/100Base‑T(X) RJ‑45 ports and 2×100Base‑FX single‑mode SC fiber ports for long‑distance transmission up to 30 km. - **Ultra‑Fast Redundant Ethernet Ring:** ORing’s proprietary **O‑Ring** technology provides network recovery times of **

Manufacturer: Oring

Category: 100Mb Switches

- **High‑Speed Redundant Ethernet Ring:** Supports ORing’s proprietary O‑Ring technology with recovery time

Manufacturer: Oring

Category: 100Mb Switches

- **High‑speed Redundant Ethernet Ring:** Implements ORing’s proprietary O‑Ring technology with recovery time

Manufacturer: Oring

Category: 100Mb Switches

- **High Port Density:** 24 × 10/100Base-T(X) RJ-45 ports with auto MDI/MDIX support. - **Ultra-Fast Redundancy:** ORing’s O-Ring technology provides recovery times under 10 ms across up to 250 connected devices. - **Open-Ring Compatibility:** Interoperates with other vendors’ ring technologies in open architectures. - **O-RSTP Support:** Proprietary rapid spanning tree protocol for complex topologies with sub-10 ms recovery. - **Standard Redundancy Protocols:** STP, RSTP, and MSTP (IEEE 802.1D/w/s) supported. - **Precision Time Synchronization:** IEEE 1588 PTP Client support for nanosecond-level clock accuracy. - **Comprehensive Management:** Web-based GUI, Telnet, CLI, RS-232 console, and centralized Windows utility (Open-Vision). - **Advanced Security:** 802.1x authentication, MAC-based port security, RADIUS centralized management, SNMPv3 encryption. - **Traffic Optimization:** QoS (IEEE 802.1p), TOS/DiffServ, port trunking, and IGMP snooping for multicast control. - **Event Notification:** Syslog, SNMP trap, email alerts, and relay output for fault events. - **Industrial Design:** IP-30 metal enclosure, DIN-rail and wall-mount options, dual redundant 12–48 VDC power inputs. - **Wide Temperature Range:** Operates from -40°C to +70°C for extreme industrial environments. - **Reliability:** 5-year warranty and compliance with industrial EMC and safety standards.

Manufacturer: Oring

Category: 100Mb Switches

- **High‑Speed Redundant Networking:** Equipped with SUNIX **ELITE‑Ring™** redundancy protocol, the ESW‑8062‑GM achieves network recovery in less than 10 ms across up to 300 interconnected switches. It also supports IEEE 802.1W Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1D Spanning Tree Protocol (STP) for additional redundancy options. - **Comprehensive Management:** Managed via **Web browser (HTTP/HTTPS)**, **Telnet**, **RS‑232 console**, **SNMP v1/v2c/v3**, and **SUNIX Commander Pro** Windows utility. Supports group configuration, firmware upgrades, and topology visualization. - **Advanced Security:** Includes IEEE 802.1X port‑based authentication, RADIUS server integration, HTTPS/SSL and SSH secure management, IP and MAC‑based access control, and port security (MAC binding). - **Industrial‑Grade Reliability:** Designed for harsh environments with extended operating temperature range (0 °C – 60 °C standard, ‑40 °C – 80 °C extended), ESD protection (4 kV DC on Ethernet ports), surge protection (2 kV DC on power), and redundant dual 12–48 V DC power inputs. - **Comprehensive Network Control:** Supports VLAN (IEEE 802.1Q, GVRP), QoS/ToS prioritization, IGMP v1/v2/v3 snooping, RMON groups 1/2/3/9, port trunking (IEEE 802.3ad LACP), port mirroring, broadcast storm protection, and rate limiting. - **Diagnostics and Alerts:** Configurable relay output for power or link failure alarms, SNMP traps, Syslog, and SMTP email notifications. - **Compact Industrial Design:** IP30 aluminum enclosure, DIN‑rail or wall‑mountable, dimensions 56.5 × 110 × 150 mm, weight approx. 1 kg.

Manufacturer: Sunix

Category: GbE Switches

- **High‑Performance Managed Switch:** 6 × 10/100Base‑T(X) RJ‑45 ports and 2 × 1000Base‑SX (multi‑mode fiber) ports for flexible copper/fiber connectivity. - **Ultra‑Fast Redundant Ethernet Ring:** SUNIX **ELITE‑Ring™** technology provides network recovery in **

Manufacturer: Sunix

Category: GbE Switches

**High‑Performance Managed Switching** - 6 × 10/100Base‑T(X) RJ‑45 ports with auto‑negotiation and auto‑MDI/MDI‑X. - 2 × 1000Base‑LX single‑mode fiber ports (9/125 µm, up to 30 km). - Store‑and‑forward switching architecture with 8 K MAC address table. - IEEE 802.3x full‑duplex flow control and back‑pressure half‑duplex control. - Forwarding rate up to 148,800 pps per port. **Ultra‑Fast Redundancy** - **ELITE‑Ring™** self‑healing Ethernet ring redundancy with

Manufacturer: Sunix

Category: GbE Switches

- **High‑Performance Managed Switching:** 6 × 10/100Base‑TX (RJ‑45) and 2 × 1000Base‑LX (single‑mode fiber) ports for flexible copper/fiber integration. - **Ultra‑Fast Redundancy:** SUNIX **ELITE‑Ring™** self‑healing Ethernet ring with recovery time 

Manufacturer: Sunix

Category: GbE Switches

- **High‑Performance Managed Redundant Switch:** 6 × 10/100Base‑T(X) + 2 × 10/100/1000Base‑T(X) ports with full‑duplex auto‑negotiation and auto‑MDI/MDI‑X. - **Ultra‑Fast Network Recovery:** SUNIX **ELITE‑Ring™** redundancy technology provides self‑healing Ethernet ring recovery in ** 830,000 hours, 5‑year warranty, and compliance with UL, CE, FCC, and IEC industrial standards.

Manufacturer: Sunix

Category: GbE Switches

- **High‑Performance Managed Switching:** 6 × 10/100 Mbps RJ‑45 ports plus 2 × 10/100/1000 Mbps RJ‑45 uplinks for flexible network segmentation and high‑speed backbone connectivity. - **Ultra‑Fast Redundancy:** SUNIX **ELITE‑Ring™** self‑healing ring technology ensures network recovery in

Manufacturer: Sunix

Category: GbE Switches

- **High‑speed Redundant Networking:** Equipped with SUNIX ELITE‑Ring™ technology, the ESW‑8062‑MM achieves network recovery times of less than 10 ms across up to 50 interconnected units. It also supports IEEE 802.1W Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1D Spanning Tree Protocol (STP) for additional redundancy options. - **Industrial‑grade Design:** Built for continuous 24/7 operation in demanding environments, the switch withstands vibration, shock, and temperature extremes (0 °C – 60 °C standard, ‑40 °C – 80 °C extended). The IP30 aluminum enclosure ensures mechanical robustness and electromagnetic shielding. - **Comprehensive Management:** Supports multiple configuration interfaces—Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, and the Windows‑based SUNIX Commander utility. The Commander utility enables group configuration, firmware updates, and topology visualization. - **Advanced Security:** Implements IEEE 802.1X port‑based authentication, HTTPS/SSL, SSH, RADIUS server integration, IP and MAC‑based access control, and port security (MAC binding). These features protect against unauthorized access and data interception. - **Traffic Optimization:** Supports IEEE 802.1p/1Q QoS, ToS/DiffServ prioritization, port‑based and VLAN‑based QoS, and rate limiting. Port trunking (IEEE 802.3ad LACP) aggregates multiple links for higher bandwidth and redundancy. - **VLAN and Multicast Management:** IEEE 802.1Q VLAN tagging and GVRP for dynamic VLAN registration; IGMP v1/v2/v3 snooping and GMRP for efficient multicast traffic filtering. - **Diagnostics and Alerts:** Provides relay output alarm (1 A @ 24 V DC), LED indicators for power, fault, link/activity, and ring status, plus event notifications via email, SNMP traps, and Syslog. - **Fiber Optic Immunity:** Two 100Base‑FX multi‑mode ports (50/125 µm, 2 km standard) offer EMI/RFI immunity and extended communication distance for electrically noisy or hazardous areas.

Manufacturer: Sunix

Category: GbE Switches

- **High‑speed Redundant Networking:** Equipped with SUNIX **ELITE‑Ring™** technology, providing network recovery in less than 10 ms across ring topologies of up to 300 switches. Supports STP and RSTP (IEEE 802.1D/W) for additional redundancy. - **Industrial‑grade Design:** Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, designed for harsh environments with extended temperature range (‑40 °C ~ +80 °C), vibration, and shock resistance per IEC 60068‑2‑27/‑2‑6/‑2‑32. - **Comprehensive Management:** Managed via Web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or **SUNIX Commander Pro** Windows utility. Supports group configuration, firmware upgrade, and topology visualization. - **Advanced Security:** IEEE 802.1X authentication, RADIUS server integration, HTTPS/SSH secure access, IP and MAC‑based access control, and port security (MAC binding). - **Traffic Optimization:** IEEE 802.1Q VLAN and GVRP for network segmentation, QoS/ToS prioritization, IGMP snooping v1/v2/v3 for multicast filtering, and port trunking (IEEE 802.3ad LACP) for bandwidth aggregation. - **Diagnostics and Alerts:** Configurable relay output alarm (1 A @ 24 V DC), email and Syslog event notifications, SNMP traps, and LED indicators for power, fault, link/activity, and ring status. - **Redundant Power Inputs:** Dual 12 – 48 V DC inputs with reverse polarity and surge protection (2000 V DC), ensuring uninterrupted operation. - **Ease of Integration:** Compatible with industrial automation systems (PLCs, SCADA, DCS) and supports deterministic Ethernet for real‑time control applications.

Manufacturer: Sunix

Category: GbE Switches

- **High‑speed Redundant Networking:** Incorporates SUNIX ELITE‑Ring™ technology with sub‑10 ms recovery across up to 300 switches, ensuring uninterrupted data flow in ring topologies. Supports RSTP (IEEE 802.1W) and STP (IEEE 802.1D) for additional redundancy options. - **Comprehensive Management:** Managed via web browser (HTTP/HTTPS), Telnet, RS‑232 console, SNMP v1/v2c/v3, or SUNIX Commander Pro utility. Supports group configuration, firmware upgrades, and topology visualization. - **Industrial‑grade Design:** Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mount installation, ESD protection (4 kV DC on Ethernet ports), surge protection (2 kV DC on power), and reverse polarity protection. Designed for 24/7 operation in environments from 0 °C to 60 °C (‑40 °C to 80 °C for E models). - **Advanced Network Control:** Supports VLAN (IEEE 802.1Q/GVRP), QoS/ToS prioritization, port trunking (IEEE 802.3ad LACP), IGMP snooping v1/v2/v3, RMON groups 1, 2, 3, 9, and broadcast storm protection. - **Enhanced Security:** Features IEEE 802.1X authentication, HTTPS/SSH secure management, RADIUS server integration, IP/MAC‑based access control, and port security with MAC binding. - **Diagnostics and Alerts:** Provides relay output alarm (1 A @ 24 V DC), email and SNMP trap notifications, system log (Syslog) support, and LED indicators for power, fault, link/activity, and ring status. - **Flexible Power and Mounting:** Dual 12–48 V DC redundant inputs via 7‑pin removable terminal block and DC jack. Compact 56.5 × 110 × 150 mm form factor for DIN‑rail or wall mounting.

Manufacturer: Sunix

Category: GbE Switches

- **High‑Speed Redundant Networking:** Equipped with SUNIX **ELITE‑Ring™** technology, the ESW‑8062‑SS‑E achieves network recovery times of less than **10 ms**, ensuring uninterrupted data flow even during link or node failures. Supports **RSTP (IEEE 802.1W)** and **STP (IEEE 802.1D)** for interoperability with standard redundancy protocols. - **Industrial‑Grade Design:** Built for extended temperature operation from **–40 °C to +80 °C**, with IP30 aluminum housing, high vibration/shock resistance, and dual redundant DC power inputs (12–48 VDC). - **Comprehensive Management:** Managed via **Web browser (HTTP/HTTPS)**, **Telnet**, **RS‑232 console**, **SNMP v1/v2c/v3**, or **SUNIX Commander PRO** Windows utility. Supports group configuration, firmware upgrade, and topology visualization. - **Advanced Security:** Implements **IEEE 802.1X**, **RADIUS authentication**, **HTTPS/SSL**, **SSH**, **MAC/IP binding**, and **port security** for controlled network access. - **Traffic Optimization:** Supports **QoS/ToS**, **IEEE 802.1p/1Q**, **port‑based VLAN**, **GVRP**, **IGMP snooping v1/v2/v3**, and **port trunking (IEEE 802.3ad LACP)** for deterministic and prioritized data delivery. - **Diagnostics & Alerts:** Provides **relay output alarm**, **email/SNMP trap notifications**, **Syslog**, and **LED indicators** for power, fault, link, and ring status. - **Fiber Optic Connectivity:** Two 100Base‑FX single‑mode ports (9/125 µm) support transmission distances up to **30 km**, offering EMI/RFI immunity and galvanic isolation. - **Ease of Integration:** DIN‑rail or wall‑mount installation, compact form factor (56.5 × 110 × 150 mm), and plug‑and‑play configuration simplify deployment in control cabinets or field enclosures.

Manufacturer: Sunix

Category: GbE Switches

- **High‑Speed Redundant Ethernet:** Incorporates SUNIX **ELITE‑Ring™** self‑healing ring topology with sub‑10 ms recovery time, plus IEEE 802.1W Rapid Spanning Tree Protocol (RSTP) and 802.1D STP for network resilience. - **Industrial‑Grade Design:** Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, with dual redundant 12–48 V DC power inputs and 2000 V DC surge protection. - **Comprehensive Management:** Fully managed via **Web GUI (HTTPS)**, **Telnet**, **Serial Console (RS‑232)**, **SNMP v1/v2c/v3**, and **SUNIX Commander Pro** Windows utility for group configuration, firmware updates, and topology visualization. - **Advanced Security:** Supports **IEEE 802.1X**, **RADIUS authentication**, **SSH**, **HTTPS**, **MAC/IP‑based access control**, and **port security** for restricted network access. - **Traffic Optimization:** Implements **QoS/ToS**, **IEEE 802.1p/1Q VLAN tagging**, **GVRP**, **IGMP Snooping v1/v2/v3**, **Port Trunking (IEEE 802.3ad LACP)**, and **Rate Limiting** for deterministic traffic handling. - **Diagnostics & Alerts:** Provides **relay alarm output (1 A @ 24 V DC)**, **email/SNMP/syslog notifications**, **port mirroring**, and **event logging** for proactive maintenance. - **Reliability & Protection:** ESD protection 4 kV DC on Ethernet ports, surge protection 2 kV DC on power lines, reverse polarity and overload protection, and MTBF exceeding 830,000 hours. - **Environmental Endurance:** Operates from **0 °C to 60 °C** (standard) or **–40 °C to 80 °C** (E‑models), humidity 5–95 % RH non‑condensing, vibration/shock tested per IEC 60068‑2‑6/‑27/‑32.

Manufacturer: Sunix

Category: GbE Switches

- **High‑speed Redundant Networking:** Incorporates SUNIX **ELITE‑Ring™** technology providing sub‑10 ms recovery across up to 50 switches, ensuring uninterrupted data flow in ring topologies. Supports **RSTP (IEEE 802.1W)** and **STP (IEEE 802.1D)** for additional redundancy options. - **Industrial‑grade Design:** Rugged IP30 aluminum enclosure, DIN‑rail or wall‑mountable, with dual redundant 12–48 V DC power inputs and surge/ESD protection (4 kV ESD on Ethernet ports, 2 kV surge on power). - **Comprehensive Management:** Managed via **Web GUI (HTTP/HTTPS)**, **Telnet**, **RS‑232 CLI**, **SNMP v1/v2c/v3**, and **SUNIX Commander Pro** Windows utility. Supports group configuration, firmware upgrade, and topology visualization. - **Advanced Security:** IEEE 802.1X port‑based authentication, **RADIUS** server integration, **SSH/SSL** encrypted management, **MAC/IP binding**, and port security to restrict unauthorized access. - **Traffic Control & QoS:** IEEE 802.1p/1Q QoS, ToS/DiffServ prioritization, rate limiting, and port‑based bandwidth management for deterministic performance in automation networks. - **VLAN & Multicast Management:** IEEE 802.1Q tagged and port‑based VLANs with **GVRP** support; **IGMP snooping v1/v2/v3** for efficient multicast filtering. - **Diagnostics & Alerts:** Configurable **relay alarm output** (1 A @ 24 V DC), **email/SNMP/syslog** event notifications, and **port mirroring** for traffic analysis. - **Extended Environmental Range:** Reliable operation from –40 °C to +85 °C, 5–95 % RH (non‑condensing), suitable for harsh industrial, transportation, and utility environments.

Manufacturer: Sunix

Category: GbE Switches

- **High‑Performance Managed Switch:** Supports advanced Layer 2 management via Web, Telnet, Console, CLI, and SNMP (v1/v2c/v3). - **Ultra‑Fast Redundant Ethernet Ring:** ORing’s proprietary O‑Ring technology achieves recovery times under 10 ms across up to 250 interconnected units. - **Comprehensive Redundancy Protocols:** Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (802.1w), MSTP (802.1s), and Dual Homing for network resilience. - **Advanced Network Security:** Includes 802.1X port‑based access control, MAC‑based port security, IP security, and SNMPv3 encrypted authentication. - **Flexible VLAN Management:** Supports IEEE 802.1Q VLAN tagging, port‑based VLANs, GVRP, and QinQ double tagging. - **Quality of Service (QoS):** IEEE 802.1p priority queuing with four hardware queues; supports port‑based, COS, and TOS/DSCP prioritization. - **Multicast Optimization:** IGMP Snooping v1/v2/v3 for efficient multicast traffic filtering. - **Event Notification:** Fault relay output, SYSLOG, SNMP trap, and SMTP email alerts for proactive monitoring. - **Rugged Industrial Design:** IP‑30 metal housing, DIN‑rail or wall‑mount installation, and extended operating temperature range (‑40 °C to 70 °C). - **Redundant Power Inputs:** Dual 12–48 V DC terminal block inputs plus an auxiliary 12–45 V DC power jack for triple redundancy. - **High Immunity Protection:** ESD protection up to 4 kV DC on Ethernet ports and surge protection up to 2 kV DC on power inputs. - **Compact Form Factor:** 52 mm (W) × 106 mm (D) × 144 mm (H) for space‑constrained control cabinets. - **Low Power Consumption:** Approximately 8–10 W typical.

Manufacturer: Oring

Category: GbE Switches

- **High‑Performance Managed Industrial Switch:** Supports advanced Layer 2 management, redundancy, and security features for industrial Ethernet networks. - **Fast Redundant Ethernet Ring:** ORing’s proprietary **O‑Ring** technology provides recovery time of **

Manufacturer: Oring

Category: GbE Switches

- **High‑Performance Managed Switch:** Eight‑port managed switch with 2× Gigabit and 6× Fast Ethernet ports for flexible network segmentation and uplink options. - **Ultra‑Fast Redundant Ethernet Ring:** ORing’s proprietary O‑Ring technology provides recovery times under 10 ms across up to 250 interconnected units, ensuring near‑zero downtime. - **Comprehensive Redundancy Protocols:** Supports O‑Ring, Open‑Ring, O‑RSTP, RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and Dual Homing for multi‑path redundancy. - **Advanced Network Management:** Managed via Web GUI, Telnet, Console (RS‑232), CLI, or SNMP v1/v2c/v3. Compatible with ORing’s Open‑Vision network management software for centralized monitoring. - **Robust Security:** Includes 802.1X port‑based authentication, RADIUS integration, SNMPv3 encrypted management, MAC‑based port security, IP access control, and port isolation. - **QoS and Traffic Prioritization:** IEEE 802.1p Class of Service, 4 hardware priority queues, and configurable QoS modes (Port‑based, COS, TOS/DSCP) for deterministic traffic handling. - **VLAN and Multicast Support:** IEEE 802.1Q VLAN tagging, GVRP, QinQ double tagging, and IGMP v1/v2/v3 snooping for efficient multicast traffic control. - **Event Notification and Diagnostics:** Fault relay output, alarm LED indicators, system log, SNMP traps, and email alerts for proactive fault management. - **Industrial‑Grade Design:** IP‑30 metal enclosure, DIN‑rail or wall‑mount installation, triple redundant DC power inputs, and extended ‑40 °C to +70 °C operating range. - **Reliability and Safety:** ESD protection (4 kV DC on Ethernet ports), surge protection (2 kV DC on power inputs), and compliance with IEC 60068 mechanical shock and vibration standards.

Manufacturer: Oring

Category: GbE Switches

- **High‑Speed Redundant Ethernet Ring:** Implements ORing’s proprietary **O‑Ring** technology with recovery time under **10 ms across up to 250 units**, ensuring near‑instantaneous network recovery after link failure. - **Open‑Ring and O‑RSTP Support:** Compatible with other vendors’ ring technologies and supports **O‑RSTP**, **STP**, **RSTP**, and **MSTP** (IEEE 802.1D/w/s) for flexible network topologies. - **Comprehensive Management:** Managed via **Web GUI**, **Telnet**, **Console (CLI)**, **SNMP v1/v2c/v3**, and **Open‑Vision** Windows utility for centralized monitoring and configuration. - **Advanced Security:** Includes **802.1x authentication**, **MAC‑based port security**, **RADIUS centralized password management**, and **SNMPv3 encrypted access**. - **Traffic Optimization:** Supports **QoS (802.1p)**, **TOS/DiffServ**, **IGMP snooping**, **port trunking (LACP)**, and **VLAN tagging (802.1Q/GVRP)** for efficient traffic segmentation and prioritization. - **Event Notification System:** Provides **Syslog**, **Email**, **SNMP trap**, and **relay output** alarms for proactive fault management. - **Rugged Industrial Design:** IP‑30 metal enclosure, **‑40 °C to 70 °C** operating range, **ESD 4 kV** protection on Ethernet ports, and **2000 VDC surge protection** on power inputs. - **Flexible Power and Mounting:** Dual redundant **12–48 VDC** power inputs via terminal block, **12 W typical consumption**, and **DIN‑rail or panel mounting** options.

Manufacturer: Oring

Category: GbE Switches

- **High‑Performance Managed Switch:** 10‑port configuration with 8×10/100Base‑T(X) RJ‑45 ports and 2×1000Base‑X SFP slots. - **Ultra‑Fast Redundancy:** ORing’s proprietary **O‑Ring** technology provides recovery time under **10 ms** across up to **250 units**, ensuring uninterrupted communication. - **Comprehensive Redundancy Protocols:** Supports **O‑Ring**, **Open‑Ring**, **O‑RSTP**, and **RSTP/STP (IEEE 802.1w/D)** for flexible network topologies. - **Advanced Network Management:** SNMP v1/v2c/v3, RMON, 802.1Q VLAN, port‑based VLAN, and centralized management via **Open‑Vision** Windows utility. - **Multiple Configuration Interfaces:** Web‑based GUI, Telnet, RS‑232 console (RJ‑45), CLI, and Open‑Vision software. - **Triple Redundant Power Inputs:** Two terminal‑block DC inputs (12–48 VDC) and one DC power jack (12–45 VDC) for maximum reliability. - **Event Notification System:** Supports Syslog, SNMP traps, email alerts, and relay output for fault and system alarms. - **Industrial‑Grade Design:** IP‑30 metal housing, DIN‑rail and panel mounting, ESD and surge protection, and extended temperature operation from **–40 °C to +70 °C**. - **Security and Access Control:** 802.1x authentication, MAC‑based port security, IP access control, and SNMPv3 encryption. - **Flexible VLAN and QoS:** IEEE 802.1Q VLAN tagging, GVRP, port‑based VLAN, and 4‑level QoS prioritization (port‑based, COS, TOS/DSCP). - **Multicast Optimization:** IGMP snooping (v1/v2/v3) and multicast filtering for efficient bandwidth utilization. - **Port Trunking and Link Aggregation:** Supports static trunking and IEEE 802.3ad LACP for bandwidth scaling and redundancy. - **Comprehensive Diagnostics:** Port statistics, MAC address table, event logs, and ping utility for network troubleshooting.

Manufacturer: Oring

Category: GbE Switches

- **High‑Port Density:** 18 total ports – 16× 10/100Base‑T(X) RJ‑45 and 2× Gigabit combo (RJ‑45/SFP). - **Redundant Ethernet Ring:** ORing proprietary redundancy with

Manufacturer: Oring

Category: GbE Switches

- **Full Gigabit Performance:** 8 × 10/100/1000Base‑T(X) RJ‑45 PoE PSE ports and 4 × 1000Base‑X SFP slots for fiber uplinks. Supports auto‑negotiation and auto‑MDI/MDI‑X. - **Power‑over‑Ethernet (PoE):** IEEE 802.3at compliant, up to 30 W per port. Total PoE power budget up to 240 W (depending on power supply). Supports PoE power management, priority control, and LLDP‑MED power negotiation. - **Industrial‑Grade Design:** IP30 metal enclosure, fanless operation, DIN‑rail or wall‑mount installation. Extended operating temperature range: −40 °C to +70 °C. ESD protection 4 kV (Ethernet ports), surge protection 2 kV (power input). - **Redundant Power Inputs:** Dual 50–57 V DC inputs on a 6‑pin terminal block for power redundancy and reliability. - **High Reliability Networking:** ORing proprietary **O‑Ring** redundancy technology with recovery time

Manufacturer: Oring

Category: GbE Switches

- **High-Performance Managed PoE Switch:** Six-port full-Gigabit managed switch with four PoE+ ports and two SFP uplinks for fiber connectivity. - **PoE Power Sourcing Equipment (P.S.E.):** Fully compliant with **IEEE 802.3at**, delivering up to **30W per port** for IP cameras, VoIP phones, and wireless access points. - **Redundant Network Topologies:** Supports **O-Ring** technology with recovery time

Manufacturer: Oring

Category: GbE Switches