- **Simultaneous Sampling:** Four differential analog input channels with simultaneous sampling capability, ensuring phase-coherent data acquisition across multiple channels. - **High Resolution and Speed:** 16-bit resolution with a maximum sampling rate of 500 kS/s per channel. - **Programmable Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Programmable gain settings of ×1, ×2, ×4, ×8. - **Dual Analog Outputs:** Two 12-bit analog output channels with waveform generation capability, supporting up to 1 MS/s update rate and ±10 V or 0–10 V output ranges. - **Digital I/O:** 24-channel programmable TTL/CMOS-compatible digital I/O, 8255 PIO compatible. - **Timer/Counter:** Two 16-bit general-purpose up/down timer/counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering Flexibility:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Auto-Calibration:** Fully automatic calibration using on-board 5.000 V reference with ±2 ppm/°C temperature drift and 6 ppm/1000 hr long-term stability. - **Data Transfer:** Supports programmed I/O and scatter-gather bus-mastering DMA for high-speed data throughput. - **Synchronization:** Multiple cards can be synchronized via the SSI bus for multi-card, multi-channel acquisition systems. - **Software Support:** Compatible with Windows (NT/98/2000/XP/7/8) and Linux. Supported development environments include LabVIEW®, MATLAB®, Visual C++, Visual Basic, Delphi, and C/C++ SDKs.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously at up to **250 kS/s per channel**, ensuring phase-coherent data acquisition across multiple inputs. - **High Resolution:** 16-bit analog-to-digital conversion with no missing codes, providing high accuracy and fine granularity in signal measurement. - **Analog Output Capability:** Two 12-bit analog output channels with waveform generation capability, supporting update rates up to **1 MS/s** and output ranges of **±10 V or 0–10 V**. - **Auto-Calibration:** Fully automatic calibration of gain and offset errors using onboard precision reference (5.000 V, ±2 ppm/°C), eliminating manual trimpot adjustments. - **Flexible Triggering:** Supports **software, external analog, external digital, and SSI (System Synchronization Interface)** triggers with multiple trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (8255 PIO compatible), configurable as input or output. - **Timer/Counter Functions:** Two 16-bit general-purpose up/down counters with internal 40 MHz or external clock sources up to 10 MHz. - **Scatter-Gather DMA:** High-speed bus-mastering DMA with scatter-gather capability for efficient, CPU-independent data transfer. - **System Synchronization Interface (SSI):** Enables synchronization of multiple DAQ cards for expanded channel count and coordinated sampling. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with a 68-pin VHDCI connector for all analog, digital, and timing signals. - **Software Support:** Compatible with Windows (NT4/98/2000/XP/7/8) and Linux (kernel 2.4.x) via ADLINK’s D2K-DASK and D2K-DASK/X drivers. Supports LabVIEW®, MATLAB®, Visual C++, Visual Basic, Delphi, and ActiveX environments.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **Simultaneous Sampling:** 4 differential analog input channels sampled simultaneously at up to **2 MS/s** total throughput. - **High Resolution:** 14-bit analog-to-digital conversion with no missing codes. - **Programmable Input Ranges:** Bipolar (±10 V, ±5 V, ±2.5 V, ±1.25 V) and unipolar (0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V). - **Analog Output:** Two 12-bit voltage output channels with waveform generation capability, up to **1 MS/s** update rate. - **Digital I/O:** 24 programmable TTL/CMOS-compatible digital I/O lines (8255 PIO compatible). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or up to 10 MHz external clock. - **Triggering:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. - **Auto-Calibration:** Fully automatic calibration of analog input and output channels using onboard precision reference (5.000 V ±2 ppm/°C). - **Scatter-Gather DMA:** High-speed bus-mastering DMA with scatter/gather capability for efficient data transfer without CPU overhead. - **Synchronization:** Multiple card synchronization via SSI bus for scalable multi-channel systems. - **Noise Immunity:** Differential input configuration and isolated analog/digital circuitry for high CMRR and low noise. - **Software Support:** Drivers and SDKs for Windows and Linux, including LabVIEW®, MATLAB®, Visual C++, Delphi, and ActiveX controls. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) with VHDCI 68-pin connector.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **Simultaneous Sampling:** Four differential analog input channels sampled simultaneously to ensure phase alignment and minimal cross-channel delay. - **High Resolution and Speed:** 16-bit analog-to-digital conversion with a maximum sampling rate of **800 kS/s per channel**. - **Programmable Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Programmable gain settings of 1, 2, 4, and 8. - **Dual Analog Outputs:** Two 12-bit analog output channels with waveform generation capability, supporting ±10 V or 0–10 V ranges and up to **1 MS/s update rate**. - **Digital I/O:** 24 programmable digital I/O lines (8255-compatible, TTL/CMOS levels). - **Timer/Counter:** Two 16-bit general-purpose up/down counters, TTL-compatible, with internal 40 MHz or external clock up to 10 MHz. - **Triggering Options:** Supports software, external analog, external digital, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Auto-Calibration:** Fully automatic calibration of analog input and output channels using onboard precision reference (5.000 V, ±2 ppm/°C). - **Bus-Mastering DMA with Scatter-Gather:** High-speed data transfer directly to system memory without CPU intervention, supporting fragmented memory blocks. - **System Synchronization Interface (SSI):** Enables synchronization of multiple DAQ cards for expanded channel count and coordinated sampling. - **Compact Design:** Half-size PCI card (175 mm × 107 mm) suitable for space-constrained systems. - **Software Support:** Compatible with Windows (NT/98/2000/XP) and Linux (kernel 2.4.x). Supported libraries: D2K-DASK, D2K-DASK/X, LabVIEW® driver (D2K-LVIEW), ActiveX (D2K-OCX), and DAQBench.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High-Speed Analog Input:** 64 single-ended or 32 differential analog input channels with 12-bit resolution and up to 3 MS/s sampling rate. Supports both unipolar and bipolar input ranges from ±0.05 V to ±10 V and 0–10 V to 0–0.1 V. - **Analog Output Capability:** Two 12-bit analog output channels with ±10 V or 0–10 V ranges and 1 MS/s maximum update rate. Each channel includes a 1 k-sample FIFO buffer for waveform generation. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO) for control and monitoring applications. - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz internal or up to 10 MHz external clock input. - **Triggering and Synchronization:** Supports software, external analog/digital, and SSI (System Synchronization Interface) triggers. Multiple trigger modes: pre-trigger, post-trigger, middle-trigger, delay-trigger, and re-trigger. Synchronization across multiple cards via SSI or PXI trigger bus. - **Auto-Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C) ensures long-term accuracy. - **High Bandwidth and Low Noise:** 2 MHz small-signal bandwidth at ±10 V range and 90 dB CMRR (gain = 1). Typical system noise

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High-Resolution Analog Input:** 16-bit A/D conversion with no missing codes, supporting 64 single-ended (SE) or 32 differential (DI) channels, software-selectable per channel. - **Sampling Rate:** Maximum sampling rate of 500 kS/s for single-channel operation. - **Analog Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Programmable Gain:** x1, x2, x4, x8 programmable gain settings. - **Analog Output:** Two 12-bit D/A channels with ±10 V or 0–10 V output ranges, 1 MS/s update rate, and 1 k-sample FIFO per channel. - **Digital I/O:** 24-channel TTL-compatible programmable I/O (8255 PIO). - **Timer/Counter:** Two 16-bit general-purpose up/down counters with 40 MHz base clock and external clock input up to 10 MHz. - **Triggering:** Supports software, external analog, and digital triggers, as well as SSI (System Synchronization Interface) for multi-card synchronization. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **FIFO Buffers:** 1 k-sample A/D FIFO and 1 k-sample D/A FIFO for efficient data buffering. - **Bus Interface:** 32-bit PCI bus, 3.3 V or 5 V signaling, plug-and-play configuration. - **Software Support:** Compatible with Windows 7/8 (x86/x64) and Linux; drivers available for LabVIEW, MATLAB, C/C++, Visual Basic, and Visual Studio.NET. - **Synchronization:** Multiple card synchronization via SSI bus or PXI trigger bus. - **Utility Software:** AD-Logger for data logging and monitoring.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **Bus Interface:** 32-bit PCI bus supporting 3.3 V or 5 V signaling; plug-and-play configuration. - **Analog Inputs:** 64 single-ended or 32 differential channels, software-selectable per channel. - **Resolution:** 16-bit, no missing codes. - **Sampling Rate:** Up to 250 kS/s aggregate throughput. - **Input Range:** Bipolar ±10 V, ±5 V, ±2.5 V, ±1.25 V; Unipolar 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V. - **Programmable Gain:** x1, x2, x4, x8. - **FIFO Buffer:** 1024-sample A/D FIFO and 1024-sample D/A FIFO. - **Analog Outputs:** Two 12-bit voltage output channels (0–10 V, ±10 V, or external reference). - **Digital I/O:** 24-channel TTL-compatible programmable I/O (8255 PIO). - **Counters/Timers:** Two 16-bit general-purpose up/down counters with 40 MHz base clock. - **Triggering:** Supports software, external analog, and digital triggers; pre-, post-, middle-, and delay-trigger modes. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C). - **Synchronization:** Multi-card synchronization via SSI (System Synchronization Interface) or PXI trigger bus. - **Software Support:** Compatible with Windows and Linux; drivers for LabVIEW, MATLAB, C/C++, Visual Basic, and .NET. - **Utility Software:** AD-Logger for data logging and analysis. - **Connectors:** Two 68-pin VHDCI connectors for analog, digital, and timing signals. - **Form Factor:** PCI card, dimensions 175 mm × 107 mm.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High Channel Density:** 96 single-ended (SE) or 48 differential (DI) analog input channels, with software-selectable mixed-mode operation. - **High-Speed Sampling:** Maximum sampling rate of **3 mega-samples per second (3 MS/s)** with 12-bit resolution and no missing codes. - **Flexible Input Ranges:** Bipolar ranges: ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V, ±1 V, ±0.5 V, ±0.25 V, ±0.2 V, ±0.05 V Unipolar ranges: 0–10 V, 0–5 V, 0–4 V, 0–2.5 V, 0–1 V, 0–0.5 V, 0–0.4 V, 0–0.1 V - **Programmable Gain:** Selectable gains of ×1, ×2, ×4, ×5, ×8, ×10, ×20, ×40, ×50, and ×200. - **Auto Calibration:** Fully automatic calibration with onboard 5.000 V reference (±2 ppm/°C), ensuring long-term accuracy and stability. - **FIFO Buffer:** 1 k-sample (1024-word) onboard A/D FIFO for efficient data buffering. - **Triggering Options:** Supports software, external digital, external analog, and SSI (System Synchronization Interface) triggers. Trigger modes include pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger. - **Digital I/O:** 24-channel TTL-compatible programmable digital I/O (8255 PIO). - **Synchronization:** Multiple card synchronization via SSI bus or PXI trigger bus for multi-card, multi-channel systems. - **Software & OS Support:** Compatible with Windows 7/8 (x86/x64) and Linux. Supported development environments: LabVIEW, MATLAB, C/C++, Visual Basic, Visual Studio.NET. - **Plug-and-Play PCI Interface:** 32-bit PCI bus, 3.3 V/5 V signaling, automatic resource configuration (IRQ, DMA).

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High‑Resolution Analog Input:** 16‑bit A/D conversion with no missing codes, supporting 16 single‑ended or 8 differential channels (software‑selectable). - **High Sampling Rate:** Maximum aggregate sampling rate of 250 kS/s for all channels combined. - **Flexible Input Ranges:** Bipolar ranges: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar ranges: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V - **Programmable Gain:** Gains of ×1, ×2, ×4, ×8 selectable per channel. - **Channel Gain Queue:** 512‑entry configuration queue allowing mixed channel, gain, and range settings for sequential scans. - **FIFO Buffers:** 1 k‑sample A/D FIFO for continuous high‑speed acquisition. - **Triggering Options:** Software, external digital, external analog, and SSI (System Synchronization Interface) triggers. Supports pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and repeated trigger modes. - **Digital I/O:** 24‑channel TTL‑compatible programmable I/O (8255 PIO). - **Timer/Counter:** Two 16‑bit general‑purpose up/down counters with 40 MHz base clock and external clock input up to 10 MHz. - **Auto‑Calibration:** Fully automatic calibration with onboard 5 V reference (±2 ppm/°C). - **System Synchronization Interface (SSI):** Enables synchronization of multiple DAQ cards for simultaneous sampling. - **Bus Compatibility:** 32‑bit PCI bus supporting both 3.3 V and 5 V signaling. - **Software Support:** Drivers and SDKs for Windows 7/8 x86/x64 and Linux. Compatible with LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. - **Utility Software:** AD‑Logger for data logging and configuration.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI

- **High‑Resolution Analog Input:** 16‑bit A/D converter with no missing codes, supporting up to 16 single‑ended or 8 differential channels. Maximum sampling rate: **250 kS/s**. - **Dual Analog Output Channels:** Two 12‑bit D/A converters with waveform generation capability. Maximum update rate: **1 MS/s** per channel. - **Flexible Input Ranges:** Bipolar: ±10 V, ±5 V, ±2.5 V, ±1.25 V Unipolar: 0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V Programmable gain: ×1, ×2, ×4, ×8. - **Auto‑Calibration:** Fully automatic calibration for both A/D and D/A circuits using onboard 5.000 V reference (±2 ppm/°C). - **Triggering and Synchronization:** Supports software, external analog, and digital triggers. Multiple trigger modes: pre‑trigger, post‑trigger, middle‑trigger, delay‑trigger, and re‑trigger. Synchronization of multiple cards via **SSI (System Synchronization Interface)** bus. - **Digital I/O and Timing:** 24‑channel TTL‑compatible programmable digital I/O (8255 PIO). Two 16‑bit general‑purpose timers/counters (up to 10 MHz external clock). - **High‑Speed Data Transfer:** Scatter‑gather DMA for efficient, high‑throughput data movement. 1 k‑sample FIFO buffers for both A/D and D/A operations. - **Software and OS Support:** Compatible with Windows 7/8 x86/x64 and Linux. Drivers and SDKs for LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET. Utility software: **AD‑Logger** for data logging and configuration. - **Connectivity:** Two 68‑pin VHDCI connectors for analog, digital, and timing signals. Optional terminal boards and cables: DIN‑68S‑01, ACL‑10568‑1, ACL‑SSI‑2/3/4.

Hersteller: Adlink Technology Inc.

Kategorie: A/D Intelligent PCI