- **CompactPCI 3U Form Factor:** Fully compliant with the PICMG CompactPCI 3U standard, featuring a 2 mm-pitch HM (IEC-1076) connector for backplane interfacing. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz (Pentium MMX up to 266 MHz supported). - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM/EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Integrated Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput and CPU performance. - **Chipset:** Intel 430HX (Triton II) system chipset with SMC37C669 I/O controller integrating floppy, serial, and parallel interfaces. - **Storage Options:** - Onboard 2.1 GB IDE hard disk drive (HDD) - 3.5" floppy disk drive (FDD) - DiskOnChip socket supporting 2 MB to 72 MB flash storage (M-Systems compatible) - **I/O Interfaces:** - Two USB ports - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485) - One parallel port (EPP/ECP bi-directional) - PS/2 keyboard and mouse connectors - IDE and FDD connectors for storage devices - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy insertion/removal; available in 8 HP (HDD only) or 12 HP (HDD + FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A; designed for efficient heat dissipation in compact enclosures. - **Operating Temperature Range:** 0°C to 60°C (32°F to 140°F), suitable for industrial environments.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI 3U Form Factor:** Conforms to PICMG CompactPCI 3U mechanical and electrical standards, ensuring interoperability with standard CompactPCI backplanes and peripheral modules. - **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 processors up to 233 MHz. The board supports Pentium MMX technology for enhanced multimedia and computational performance. - **Memory Architecture:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules from 2 MB to 128 MB (expandable to 256 MB with dual SO-DIMM configuration on certain variants). - **Cache System:** Integrated 512 KB second-level pipeline burst cache for improved data throughput and reduced latency. - **Chipset:** Utilizes Intel 430HX (Triton II) chipset for system control and SMC37C669 for I/O management, integrating floppy, serial, and parallel port controllers. - **Storage Options:** - Socket for M-Systems DiskOnChip (2 MB to 72 MB capacity) for solid-state storage. - Dual IDE interfaces supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Floppy disk controller supporting up to two drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports mounted on the front bracket. - PS/2 keyboard and mouse connectors (6-pin Mini-DIN). - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets for fault recovery. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handles for easy insertion/removal. Available in 8 HP (with HDD) or 12 HP (with HDD and FDD) configurations. - **Power and Thermal Efficiency:** Operates on +5V DC at 4.0A. Designed for efficient heat dissipation suitable for fanless or ruggedized systems. - **Operating Environment:** Temperature range: 0°C to 60°C (32°F to 140°F).

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **Processor Support:** Compatible with Intel Pentium P54C/P55C, AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Utilizes the Intel 430HX (Triton II) chipset for stable and efficient system performance. - **Memory:** One 144-pin SO-DIMM socket supporting 3.3V FPM or EDO DRAM modules up to 128 MB (expandable to 256 MB with dual sockets on certain configurations). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Integrated 2.1 GB IDE hard disk drive (HDD). - Socket for M-Systems DiskOnChip solid-state storage (2 MB to 72 MB). - Support for up to two IDE devices (Mode 4 Enhanced IDE). - Support for up to two floppy drives (3.5" or 5.25"). - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable watchdog timer with 14 selectable intervals (0–64 seconds) capable of generating system resets. - **CompactPCI Interface:** Fully compliant with PICMG CompactPCI 3U standard, using 2 mm-pitch HM connectors. - **Form Factor:** 3U Eurocard (100 mm x 160 mm) with 8 HP or 12 HP front panel options. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low Power Pentium-MMX Processor:** Socket-7 PPGA CPU up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable performance. - **Memory Support:** One 144-pin SO-DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Storage:** Built-in housing for a 2.5" low-profile IDE HDD (≥5 GB) and one DiskOnChip socket (up to 144 MB). - **I/O Interfaces:** Two USB 1.1 ports, two serial ports (COM1 RS-232, COM2 RS-232/422/485), one parallel port, PS/2 keyboard and mouse connectors. - **Ethernet Networking:** Onboard Intel 82559 controller supporting 10/100Base-TX with PXE remote boot capability. - **Watchdog Timers:** Dual programmable watchdog timers for system reliability. - **Hardware Monitoring:** Winbond W83781D monitors CPU temperature, fan speed, and system voltages. - **Hot Swap Support:** Designed for CompactPCI hot-swap environments. - **Form Factor Options:** Available in 2-slot (8TE/HP) and 3-slot (12TE/HP) configurations. - **Environmental Robustness:** Operating temperature 0–60°C, vibration and shock tested for industrial use. - **Certifications:** CE and FCC compliant, HALT tested for temperature and vibration stress.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Low‑Power CPU:** Socket‑7 PPGA Low‑Power Pentium‑MMX processor up to 266 MHz with 512 KB L2 cache. - **Intel 430TX Chipset:** Incorporates Intel 82439TX (MTXC) and 82371EB (PIIX4E) for stable, legacy‑compatible performance. - **Memory Support:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Integrated Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote‑boot support. - **Storage Options:** Two 44‑pin EIDE connectors supporting up to four IDE devices; one DiskOnChip socket supporting up to 144 MB DOC flash; onboard 32 MB flash disk. - **Peripheral Interfaces:** Two USB 1.1 ports, two serial ports (RS‑232 and RS‑232/422/485), one parallel port, PS/2 keyboard and mouse ports. - **Watchdog Timers:** Dual programmable watchdog timers (WDT1 and WDT2) for system reliability. - **Hardware Monitoring:** Winbond W83781D chip monitors CPU temperature, fan speed, voltages. - **Hot Swap Support:** Compliant with CompactPCI Hot Swap specification for modular maintenance. - **Environmental Ruggedness:** Designed for industrial operation (0 – 60 °C operating range, shock and vibration tested). - **Form Factor Flexibility:** Available in 2‑slot (8TE/HP) and 3‑slot (12TE/HP) widths for different system requirements. - **BIOS Features:** Award PnP BIOS with 2 Mb Flash ROM, DMI support, power management, and custom OEM boot screen. - **PXE Network Boot:** Supports Intel Preboot Execution Environment for remote boot and network installation.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB unbuffered SDRAM. - **Storage:** - Integrated 2.5″ HDD bay (≥ 5 GB ATA HDD standard). - Slim‑type 3.5″ FDD module (separable). - Two 44‑pin EIDE connectors supporting up to four IDE devices. - DiskOnChip socket supporting up to 144 MB flash storage. - **Networking:** Onboard Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485 selectable). - One parallel port (Mini D‑Sub 26‑pin). - PS/2 keyboard and mouse connectors. - **System Monitoring:** Winbond W83781D hardware monitor for CPU/system temperature, fan speed, and voltage. - **Watchdog Timers:** Two independent programmable watchdog timers (WDT1 and WDT2). - **Form Factor:** 3U CompactPCI, available in 3‑slot (12 TE/HP) or 2‑slot (8 TE/HP) configurations. - **Indicators & Controls:** Power and IDE LEDs, Ethernet link/activity LEDs, and front‑panel reset switch. - **Environmental Robustness:** Designed for industrial temperature, vibration, and shock conditions. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, SCO Unix, VxWorks, and Novell NetWare. - **Utility Support:** Hardware Doctor monitoring utility and PXE boot environment tools.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **CompactPCI Compliance:** Fully compliant with PICMG 2.0 R2.1 and PICMG 2.1 Hot Swap R1.0 specifications. - **Processor:** Socket‑7 PPGA Low‑Power Pentium‑MMX CPU up to 266 MHz. - **Chipset:** Intel 430TX (82439TX MTXC + 82371EB PIIX4E). - **Memory:** One 144‑pin SO‑DIMM socket supporting up to 256 MB SDRAM (3.3 V unbuffered). - **Storage:** - 32 MB onboard flash disk (Disk‑On‑Chip socket supports up to 144 MB). - Two 44‑pin EIDE connectors supporting up to four IDE devices (PIO Mode 3/4, Ultra DMA/33). - Built‑in housing for 2.5″ low‑profile HDD. - Separable slim‑type 3.5″ FDD module. - **Networking:** Integrated Intel 82559 10/100 Mb Ethernet controller with PXE remote boot support. - **I/O Interfaces:** - Two USB 1.1 ports (front panel). - Two serial ports (COM1 RS‑232, COM2 RS‑232/422/485). - One parallel port (SPP/EPP/ECP). - PS/2 keyboard and mouse connectors. - **System Management:** Dual watchdog timers, hardware monitoring (Winbond W83781D), and BIOS power management. - **Indicators & Controls:** Power LED, IDE activity LED, Ethernet link/speed LEDs, and reset switch. - **Form Factor:** 3U CompactPCI (100 × 160 mm), 3‑slot (12 TE/HP) width with FDD module. - **Environmental Robustness:** Designed for industrial applications with extended temperature and vibration tolerance. - **Software Support:** Drivers for Windows 95/98/NT/2000, Linux, Novell, SCO Unix, VxWorks, and DOS.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266

- **Processor Support:** Intel Pentium MMX (P54C/P55C), AMD K5/K6, and Cyrix M1/M2 CPUs up to 233 MHz. - **Chipset:** Intel 430HX (Triton II) system chipset for stable and efficient performance. - **Memory:** Supports up to 256 MB of 3.3V FPM/EDO DRAM via two 144-pin SO-DIMM sockets (notebook standard). - **Cache:** 512 KB second-level pipeline burst cache for enhanced data throughput. - **Storage Options:** - Onboard **DiskOnChip socket** (M-Systems) supporting 2 MB to 72 MB flash storage. - Dual **IDE interfaces** supporting up to two PCI Mode 4 Enhanced IDE hard drives. - Dual **floppy drive interfaces** supporting 3.5" and/or 5.25" drives. - **I/O Interfaces:** - Two serial ports (one RS-232, one configurable RS-232/RS-422/RS-485). - One parallel port (EPP/ECP bi-directional). - Two USB ports. - PS/2 keyboard and mouse connectors. - **Watchdog Timer:** Programmable 0–64 second interval with system reset capability. - **CompactPCI Bus Interface:** Fully compliant with **PICMG 3U CompactPCI** standard. - **Front Panel Design:** Aluminum Eurocard front plate with ejector handle for easy installation/removal. - **Operating Temperature:** 0°C to 60°C (32°F to 140°F). - **Power Requirements:** +5V DC at 4.0A. The cPCI-8586 is engineered for rugged industrial environments, offering reliable operation, modular expandability, and long-term availability for embedded system integrators.

Hersteller: Adlink Technology Inc.

Kategorie: cPCI CPU LPP-266