- **32 Single‑Ended Analog Input Channels:** Each channel is individually isolated to protect the host PC and connected equipment. - **High Voltage Isolation:** Over **2500 VDC isolation** between channels and system ground ensures safe operation in high‑voltage environments. - **12‑bit Resolution:** Provides fine granularity for analog‑to‑digital conversion, suitable for precision measurement. - **Wide Input Range:** Supports both **bipolar (±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V)** and **unipolar (0–10 V, 0–5 V, 0–2.5 V, 0–1.25 V, 0–0.625 V)** ranges. - **Software‑Programmable Gain Control:** Selectable gains of ×1, ×2, ×4, ×8, and ×16 for each channel. - **On‑Board Signal Conditioning:** Integrated RC filters and configurable I‑to‑V conversion circuits for flexible signal adaptation. - **High Conversion Speed:** Up to **50 kHz** maximum sampling rate using a **successive approximation A/D converter (AD574 or equivalent)**. - **Compact Half‑Size ISA Card:** 160 mm × 122 mm PCB with 4‑layer design and integral ground plane for noise immunity. - **Integral DC‑to‑DC Converters:** Provide stable isolated power for analog circuitry. - **Software Triggered Conversion:** Fully software‑controlled A/D triggering for flexible timing. - **Comprehensive Software Support:** Includes DOS C/C++ libraries, Windows DLLs (ACLS‑DLL2), and LabVIEW drivers (ACLS‑LVIEW). - **Over‑Voltage Protection:** Continuous protection up to ±35 V. - **High Accuracy:** ±0.015 % of reading ± 1 LSB typical. - **Temperature Stability:** 5 ppm/°C typical, 15 ppm/°C maximum.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **48 Total Channels:** 24 digital input and 24 digital output channels, TTL-level, bidirectional configuration. - **TTL Logic Compatibility:** Operates at standard 5VDC TTL logic levels, ensuring compatibility with a wide range of digital devices and controllers. - **Opto-Isolated Interface:** Provides electrical isolation between the PC and external circuits to prevent noise interference and protect the host system. - **Interrupt Support:** Supports up to four interrupt request lines (IRQ3–7/9), allowing event-driven control and efficient CPU utilization. - **Connector Interfaces:** Equipped with a 37-pin D-sub connector and a 30-pin flat cable connector for flexible wiring and external device connection. - **Compact Form Factor:** Board dimensions of approximately 340.5 mm × 107 mm, suitable for standard PC expansion slots. - **High-Speed Response:** Designed for fast digital signal processing, suitable for real-time control and monitoring. - **Software Support:** Compatible with CONTEC’s API-TOOL drivers for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial Reliability:** Built for continuous operation in industrial environments, with robust circuit protection and stable performance.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **Opto-Isolated I/O:** 32 input and 32 output channels are isolated via opto-couplers, ensuring electrical separation between field signals and the PC bus. - **Positive Common Configuration:** Designed for current-sourcing (positive common) systems, suitable for 12–24 VDC industrial control environments. - **High Noise Immunity:** Optical isolation up to 5 kV provides robust protection against electrical noise, surges, and ground potential differences. - **Wide Input Voltage Range:** Accepts 12–24 VDC input signals with 2 kΩ input resistance. - **Open Collector Outputs:** Each output channel supports up to 35 VDC and 150 mA sink current, suitable for driving relays, lamps, and solenoids. - **Interrupt Capability:** Supports up to four interrupt request lines (IRQ 3–7, 9–12, 14, 15) for event-driven control. - **Low Power Consumption:** Operates from the PC’s +5 VDC supply, consuming a maximum of 100 mA. - **High Reliability:** Industrial-grade components and opto-couplers ensure long-term stability and durability. - **Standard 96-pin Half-Pitch Connector:** Provides a compact, high-density interface for external wiring. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm fit standard ISA slots. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ for LabVIEW integration.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **Opto-Isolated I/O:** Provides complete electrical isolation between the PC’s internal logic and external I/O circuits using opto-couplers, protecting the system from surges, noise, and ground potential differences. - **32 Inputs / 32 Outputs:** Supports 32 opto-isolated digital input channels and 32 opto-isolated open-collector output channels. - **Negative Common Configuration:** Designed for current sourcing circuits (negative common), where the common polarity is reversed relative to current sinking circuits. - **Input Voltage Range:** 12–24 VDC input level with 2.2 kΩ input resistance. - **Output Rating:** 35 VDC maximum, 150 mA per channel (open collector type). - **High Isolation Voltage:** 5 kV isolation between PC logic and I/O interface. - **Interrupt Support:** Four independent interrupt request lines (IRQ 3–7, 9–12, 14, 15) can be assigned for event-driven input monitoring. - **Surge and Overcurrent Protection:** Built-in Zener diode and protective circuitry prevent damage from voltage surges and overcurrent conditions. - **High Noise Immunity:** Opto-coupler isolation and digital filtering ensure stable operation in electrically noisy environments. - **Standard 96-pin Half-Pitch Connector:** Provides a compact, high-density interface for external wiring. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial-Grade Reliability:** Designed for continuous operation in industrial control systems, with robust PCB design and high-quality components.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **Opto-Isolated Outputs:** Each of the 32 output channels is optically isolated from the PC’s internal logic circuits, preventing electrical interference and protecting the host system from voltage spikes or ground loops. - **On-Board Power Supply:** Equipped with an integrated 12VDC (240mA) power source to drive the output circuit photocouplers, eliminating the need for an external power supply for isolation circuits. - **Open Collector Output Configuration:** Current sinking type outputs capable of switching up to 35VDC at 200mA per channel, suitable for driving relays, lamps, solenoids, and other DC loads. - **High Noise Immunity:** Opto-coupler isolation ensures excellent noise resistance, making the board suitable for electrically noisy industrial environments. - **Surge and Overcurrent Protection:** Each output transistor includes built-in protection circuits (Zener diode and current limiting) to prevent damage from voltage surges or excessive current. - **Fast Response Time:** Maximum output response time of 200 microseconds, enabling rapid switching for real-time control applications. - **Compact ISA Form Factor:** Standard ISA AT bus card dimensions (163.0 mm × 122.0 mm) compatible with legacy and industrial PC systems. - **Standard 37-Pin D-Sub Connector:** Provides a robust and widely supported interface for external wiring and connection to terminal blocks or cable assemblies. - **Software Support:** Compatible with CONTEC’s API-PAC(W32) driver library for Windows and Linux, as well as LabVIEW VI-DAQ libraries for easy integration into measurement and control systems.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **32 Opto-Isolated Digital Output Channels:** Provides 32 independent open-collector output channels for controlling external devices such as relays, solenoids, and indicators. - **High Voltage and Current Capability:** Each output channel supports up to **35VDC at 200mA**, with a maximum of **2A per group** (grouped outputs). - **Optical Isolation:** Isolation voltage up to **1kVrms** between the PC bus and external I/O circuits, protecting the host system from surges and ground potential differences. - **Open Collector (Current Sinking) Output Type:** Suitable for driving loads connected to positive supply lines; compatible with a wide range of industrial actuators. - **Surge and Overcurrent Protection:** Built-in Zener diode and current-limiting circuitry prevent damage from transient voltage spikes or overload conditions. - **Fast Response Time:** Typical output response within **200 microseconds**, enabling precise control in time-critical automation systems. - **Compact ISA Form Factor:** Standard AT card dimensions (approx. 160 × 122 mm) for easy integration into legacy or industrial PC systems. - **Standard 37-pin D-Sub Female Connector:** Provides robust and widely compatible external connection interface. - **Software Support:** Compatible with CONTEC’s **API-TOOL** driver suite for Windows and Linux, and **VI-DAQ** library for LabVIEW integration. - **Industrial-Grade Reliability:** Designed for continuous operation in factory automation, test benches, and control systems requiring high electrical isolation and durability.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **32 Opto‑Isolated Output Channels:** Each channel is individually isolated via high‑quality opto‑couplers to prevent electrical interference and ground loops. - **Negative Common Configuration:** Designed as a current‑sourcing (open‑collector) output type where loads are connected between the output terminal and the negative common of the external power supply. - **High Output Capacity:** Supports up to 35 V DC and 150 mA per channel, suitable for driving relays, lamps, solenoids, and other DC loads. - **High Isolation Voltage:** Isolation withstands up to 1 kVrms between the PC logic and external circuits, ensuring safety and noise immunity. - **Opto‑Coupler Isolation:** Protects the host PC from voltage surges, transient spikes, and ground potential differences. - **Compact Form Factor:** Standard PC‑Bus card size (approx. 160 × 122 mm) for easy integration into industrial PCs. - **Standard 37‑Pin D‑SUB Connector:** Provides a reliable and widely supported interface for external wiring. - **Software Support:** Compatible with CONTEC’s API‑TOOL driver suite for Windows® and Linux®, and VI‑DAQ library for LabVIEW®. - **Industrial‑Grade Reliability:** Designed for continuous operation in factory automation, process control, and test systems. - **Flexible Integration:** Can be combined with CONTEC terminal blocks, cables, and accessories for simplified wiring and maintenance.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **32 Opto‑Isolated Digital Output Channels:** Provides 32 independent digital output points, each isolated via opto‑couplers to prevent electrical interference between the PC and external circuits. - **High‑Speed Output Response:** Maximum response time of **1 µs**, enabling precise and rapid control of external devices. - **On‑Board Power Supply:** Integrated power circuitry eliminates the need for an external power source to drive the output opto‑couplers. This simplifies system design and enhances reliability. - **TTL‑Level Output:** Output signal conforms to **5 V DC TTL logic**, with a maximum output current of **6.4 mA per channel**. - **High Isolation Voltage:** Provides up to **5 kV isolation** between the PC bus and external I/O circuits, ensuring robust protection against surges and ground potential differences. - **Compact ISA Form Factor:** Standard ISA bus interface card with dimensions of **160 mm × 122 mm**, suitable for legacy and embedded industrial PC systems. - **Standard 37‑Pin D‑Sub Connector:** Equipped with a **37‑pin female D‑type connector** for easy connection to external devices, terminal blocks, or cable assemblies. - **Industrial‑Grade Design:** Designed for continuous operation in industrial environments with high electrical noise, ensuring stable performance and long service life. - **Software Support:** Compatible with CONTEC’s **API‑TOOL** driver suite for Windows and Linux, and **VI‑DAQ** library for LabVIEW integration.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **64 Opto-Isolated Output Channels:** Provides 64 independent open-collector output channels, each optically isolated to prevent electrical interference and protect the host system. - **High Output Capacity:** Supports up to 35VDC and 200mA per channel, suitable for driving relays, lamps, solenoids, and other industrial actuators. - **High Isolation Voltage:** Offers up to 5kV isolation between the PC bus and external I/O circuits, ensuring superior noise immunity and system protection. - **Open Collector Output (Current Sinking Type):** Designed for current sinking output configuration, compatible with a wide range of external loads. - **Surge and Overcurrent Protection:** Built-in Zener diode and current-limiting circuitry protect against voltage surges and overcurrent conditions. - **Low Power Consumption:** Operates on a 5VDC supply with a maximum current draw of approximately 100mA, minimizing system power load. - **Compact Form Factor:** Standard AT card dimensions (160 mm × 122 mm) suitable for legacy and embedded industrial PCs. - **High Noise Immunity:** Opto-coupler isolation ensures reliable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch Connector:** Provides a high-density connection interface for external wiring, compatible with CONTEC’s accessory cables and terminal blocks. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding industrial and laboratory environments.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **32 Independent Output Channels:** Provides 32 discrete Photo MOS relay outputs for flexible control of external devices. - **High Voltage and Current Capability:** Supports up to 199 VDC or 199 VAC per channel, with a maximum current of 250 mA per channel. - **Grouped Power Handling:** Each group of 8 channels supports a combined maximum current of 1 A, allowing efficient load distribution. - **Fast Switching Performance:** Typical operation time is less than 1 ms, enabling rapid control response suitable for automation and test systems. - **Optical Isolation:** Each output channel is optically isolated from the control circuitry, protecting the host system from voltage spikes, surges, and ground loops. - **Standardized Connector Interface:** Equipped with a 37-pin D-sub female connector for easy integration with CONTEC cables, terminal blocks, and external devices. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm allow installation in compact control enclosures or PC chassis. - **High Reliability Solid-State Design:** Photo MOS relays provide silent operation, no mechanical wear, and long service life. - **Cross-Platform Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and supports LabVIEW integration via VI-DAQ libraries. - **Industrial-Grade Build:** Designed for continuous operation in industrial environments with robust electrical isolation and surge protection.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **32 Independent Reed Relay Outputs:** Provides 32 channels of single-pole, single-throw (SPST) reed relay contacts for flexible control of external devices. - **High Isolation and Reliability:** Each relay contact is isolated from the PC’s internal circuitry, ensuring electrical separation and protection against noise or surges. - **Switching Capacity:** Supports up to 10VA (AC) or 10W (DC) per channel, suitable for low-power signal switching applications. - **Fast Switching Time:** Typical switching response of less than 1 millisecond, enabling rapid control operations. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm allow installation in standard PC expansion slots. - **Standard 37-pin D-sub Connector:** Equipped with a 37-pin female D-type connector (DCL-J37SAF-20L9 [JAE] or equivalent) for easy external wiring. - **PCI/ISA Bus Compatibility:** Designed for use in PC-based control systems with standard bus interfaces. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Long Mechanical Life:** Reed relay contacts rated for up to 200 million operations under nominal load conditions. - **Industrial-Grade Design:** Built for stable operation in factory automation, test systems, and process control environments.

Hersteller: Contec

Kategorie: DIO Isolated ISA

- **Four Independent 32‑bit Counters:** Each channel supports up/down counting with 32‑bit resolution (maximum count FFFFFFFFh). - **High‑Speed Pulse Input:** Accepts LVTTL‑level signals up to 10 MHz (50 % duty cycle). - **Two‑Phase and Single‑Phase Operation:** Supports two‑phase (A/B/Z), single‑phase, and single‑phase with gate control modes. - **Non‑Isolated LVTTL Input:** Direct connection to TTL/LVTTL devices such as encoders and linear scales. - **Digital Filter:** Adjustable per channel (0.1 µs – 1.6384 ms) to suppress noise and chattering. - **Programmable Timer:** 1 ms – 6553 ms (1 ms increments) for timing and sampling control. - **Bus Master Transfer (DMA):** Enables high‑speed data transfer between board and PC memory without CPU load; up to 80 MB/s (max 133 MB/s). - **Interrupt Generation:** One interrupt with multiple factors (count match, count error, sampling factors, carry/borrow, timer). - **Control I/O:** Four LVTTL control inputs and four LVTTL control outputs per board. - **Test Pulse Output:** 100 kHz fixed frequency for verification and diagnostics. - **Sampling Functions:** Internal/external sampling start/stop triggers and external clock input up to 10 MHz. - **Compatibility:** Connector pin assignment compatible with CNT32‑4MT(LPCI) and CNT32‑4MT(CB). - **Low Profile Design:** Fits compact systems; includes standard‑height bracket for full‑size PCIe slots. - **Optional Differential Input Conversion:** Convertible to differential input using optional terminal CTP‑4D and cable CNT‑68M/50M. - **Software Support:** Includes API‑PAC(W32) driver library for Windows; compatible with Visual C++, Visual Basic, Delphi, C# .NET, etc. - **LabVIEW Support:** VI‑DAQ library available for National Instruments LabVIEW integration.

Hersteller: Contec

Kategorie: Counter/Timer PCIe

- **Eight Independent 32‑bit Counters:** Provides 8 channels of 32‑bit up/down counting, each capable of two‑phase (A/B/Z) or single‑phase counting with gate control. - **High‑Speed Counting:** Supports input frequencies up to **10 MHz** (duty cycle 50%) for both TTL and differential inputs, enabling accurate high‑speed pulse measurement. - **Two‑Phase Signal Support:** Compatible with incremental rotary encoders, linear gauges, and other pulse‑output sensors requiring A/B/Z phase counting. - **Bus Master Data Transfer:** Incorporates a **Bus Master Transfer** function that allows large sampling data to be transferred directly to PC memory without CPU overhead, ensuring high throughput and low latency. - **Synchronous Control Capability:** Equipped with **Synchronous Control Connectors (SCC)** that enable synchronized operation of up to **16 boards** simultaneously, ideal for multi‑axis or multi‑sensor systems. - **Differential Input Disconnection Detection:** Automatically detects signal disconnection during differential input operation and issues an error alarm (status, interrupt, or external output). - **Digital Filtering:** Built‑in digital filter prevents false counts caused by noise or contact chattering, ensuring stable and accurate counting. - **Interrupt Functionality:** Supports one interrupt per board with multiple trigger factors: count match, count error, sampling factors, SCC error, carry/borrow, and timer events. - **Programmable Timer:** Integrated timer selectable from **1 ms to 6553 ms** in 1 ms increments for time‑based counting or sampling control. - **Surge Protection:** Input interface includes Zener diode protection to prevent damage from voltage surges or transient currents. - **Software Support:** Compatible with **Windows** and **Linux** via CONTEC’s API‑TOOL driver suite; also supports **LabVIEW** through the VI‑DAQ library. - **RoHS Compliant:** Environmentally friendly design meeting RoHS directives for hazardous substance reduction.

Hersteller: Contec

Kategorie: Counter/Timer PCIe

- **12 Programmable Timer/Counter Channels:** The AX5500P incorporates **four Intel 8254-compatible programmable interval timer (PIT) chips**, each providing three independent 16-bit counters, for a total of **12 timer/counter channels**. These channels can be configured for event counting, frequency generation, pulse width measurement, or square wave output. - **24 TTL Digital I/O Lines:** The card provides **24 channels of TTL-level digital input/output**, emulating the functionality of an **Intel 8255 Programmable Peripheral Interface (PPI) in Mode 0**. This allows for flexible digital signal interfacing, including control signal monitoring, switch input reading, and device actuation. - **PCI Bus Interface:** Fully compliant with the **PCI local bus standard**, the AX5500P supports plug-and-play configuration and automatic resource allocation, eliminating the need for manual jumper or DIP switch settings. - **Dual Connector Interface:** Equipped with both a **DB37 male connector** and a **50-pin flat cable header**, the card offers versatile connectivity options for external devices, sensors, and control modules. - **Compact Form Factor:** The board measures **175 mm × 97 mm**, allowing installation in standard PCI slots of desktop PCs or industrial computers. - **Industrial-Grade Design:** Built with high-quality components and robust PCB design, the AX5500P ensures long-term reliability and stable performance in demanding industrial environments. - **Software Compatibility:** The card is compatible with standard operating systems supporting PCI devices and can be integrated with various data acquisition and control software platforms.

Hersteller: Axiom

Kategorie: Counter/Timer PCI

- **Four Independent 24-bit Counters:** Each channel supports up/down counting with a maximum count value of FFFFFFH (16,777,215 in binary). - **Dual Input Modes:** Selectable **photo coupler isolated input** (5–12 VDC) or **TTL-level input** (5 VDC) per channel via software command. - **Two-Phase Signal Support:** Capable of counting quadrature (A/B phase) signals from rotary encoders or linear scales, as well as single-phase pulse inputs. - **Programmable Timer:** Built-in timer generates periodic interrupts at user-defined intervals (1 ms to 200 s). - **Interrupt and Match Output:** Each channel can issue an interrupt or one-shot pulse output when the counter value matches a preset comparison value. - **Digital Filtering:** Adjustable digital filter (0.1 µs to 1056.1 µs) per channel to suppress noise and contact chattering. - **General-Purpose Inputs:** One general-purpose input per channel, available in both TTL and opto-isolated configurations. - **Photo Coupler Isolation:** Provides electrical isolation between external devices and the board, enhancing noise immunity and protecting the host system. - **Software Support:** Bundled with **API-PAC(W32)** driver library for Windows and **API-CNT(LNX)** for Linux, enabling easy integration with programming environments such as Visual C/C++, Visual Basic, Delphi, and gcc. - **LabVIEW Compatibility:** Supported by the **VI-DAQ** library for National Instruments LabVIEW, allowing seamless integration into data acquisition systems. - **Universal PCI Interface:** 32-bit, 33 MHz PCI bus with universal keying (supports both 3.3 V and 5 V signaling environments).

Hersteller: Contec

Kategorie: Counter/Timer PCI

- **Four independent 24‑bit up/down counters** supporting single‑phase or two‑phase pulse inputs. - **Dual input modes:** differential line‑receiver input and TTL‑level input selectable per channel. - **High‑speed counting:** up to **1 MHz** for both differential and TTL inputs. - **Programmable timer:** allows periodic interrupt generation from **1 ms to 200 s**. - **Surge protection:** differential input section equipped with Zener‑diode surge suppression to prevent damage from voltage spikes. - **Digital filter function:** hardware‑based noise suppression to eliminate chattering and false counts. - **Counter coincidence output:** generates a pulse when a preset count value is reached. - **Interrupt generation:** triggered by count match or timer expiration for real‑time event handling. - **Compact PCI short‑size board:** 176.4 mm (L) × 107.0 mm (H). - **High reliability:** industrial‑grade components, RoHS‑compliant construction. - **Software support:** Windows and Linux drivers (API‑TOOL), and LabVIEW VI‑DAQ library for seamless integration with measurement applications. - **Connector compatibility:** 96‑pin half‑pitch connector compatible with CNT24‑4(PCI) and other CONTEC counter boards.

Hersteller: Contec

Kategorie: Counter/Timer PCI

- **Four Independent 32‑bit Counters:** Each channel supports up/down counting with 32‑bit resolution, suitable for incremental encoders, linear gauges, or pulse‑output sensors. - **Two‑Phase and Single‑Phase Counting:** Supports A/B/Z phase inputs for quadrature encoders or single‑phase pulse counting with optional gate control. - **High‑Speed Input Capability:** Maximum input frequency of **10 MHz (duty 50%)**, ensuring accurate counting of high‑frequency pulse trains. - **LVTTL Input Compatibility:** Accepts LVTTL‑level signals for direct connection to modern digital sensors and encoders. - **Bus Master Transfer Function:** Enables high‑speed data transfer between the board and PC memory without CPU overhead, improving real‑time performance. - **Low‑Profile PCI Form Factor:** Compact 121.69 mm × 105.68 mm board size, compliant with PCI Low Profile specification. Includes a standard‑height bracket for full‑size PCI slots. - **Programmable Timer:** Built‑in timer selectable from **1 ms to 6553 ms** in 1 ms increments for periodic sampling or timed interrupts. - **Interrupt Generation:** One interrupt line with multiple selectable factors: - Count match - Count error - Sampling factor - Carry/Borrow - Timer event - **Digital Filter Function:** Hardware digital filter prevents false counts due to noise or contact chattering. - **Counter Coincidence and Test Pulse Outputs:** Provides external output signals for synchronization, testing, or triggering external devices. - **Optional Differential Input Conversion:** Can be converted to differential input operation using optional **CTP‑4D** terminal and **CNT‑68M/50M** cable. - **Software Support:** Includes free Windows and Linux drivers (API‑TOOLs) and LabVIEW VI‑DAQ library for easy integration. - **RoHS and Lead‑Free Compliant:** Environmentally friendly design meeting EU RoHS directives.

Hersteller: Contec

Kategorie: Counter/Timer PCI

- **Eight 32‑bit Up/Down Counters:** Each channel supports two‑phase (A/B/Z) or single‑phase counting with gate control. - **High‑Speed Pulse Input:** Accepts TTL‑level or differential line‑receiver inputs up to 10 MHz (50 % duty). - **Bus‑Master Data Transfer:** Direct memory access (DMA) transfer between board and PC memory at up to 80 MB/s (maximum 133 MB/s) without CPU load. - **Synchronous Control Connector (SCC):** Enables synchronous operation of up to 16 boards (any combination of counter or motion controller types). - **Disconnection Detection:** Detects signal line disconnection during differential input and issues alarm output or interrupt. - **Digital Filter Function:** Programmable input filter suppresses noise and contact chattering for accurate counting. - **Counter Coincidence and Test Pulse Outputs:** Hardware outputs for event signaling and diagnostic testing. - **Interrupt Generation:** One interrupt line with multiple selectable factors (count match, count error, SCC error, carry/borrow, timer). - **Programmable Timer:** 1 – 6553 ms range, selectable in 1 ms increments, for periodic interrupt or timed operations. - **32/32 TTL Digital I/O:** Provides 32 inputs and 32 outputs for general‑purpose digital control. - **Surge Protection:** Input interface equipped with Zener diodes to protect against voltage surges and transient currents. - **Software Support:** Windows and Linux drivers (API‑TOOLs), and LabVIEW VI‑DAQ library for seamless integration. - **RoHS Compliant:** Environmentally friendly, lead‑free construction.

Hersteller: Contec

Kategorie: Counter/Timer PCI

- **8 Independent 16-bit Timer/Counters:** Each channel operates independently, allowing simultaneous timing and counting operations. - **2 Cascaded 32-bit Timer/Counters:** Two 16-bit counters can be cascaded to form 32-bit counters for extended range and precision. - **16 TTL-Level Digital I/O Channels:** Configurable as 16 inputs or 8 inputs and 8 outputs, supporting flexible digital control. - **High-Speed Operation:** Supports counting frequencies up to **10 MHz**, suitable for high-speed pulse and frequency measurement. - **Programmable Clock Sources:** Two on-board internal clock sources (0.5 MHz, 1 MHz, 2 MHz, 4 MHz) and eight external clock inputs for flexible timing control. - **Interrupt Management:** Jumper- and software-selectable interrupt sources with four interrupt channels (two counter-based and two digital input-based). - **Comprehensive Software Support:** Drivers for Windows 98/NT/2000/XP and LabVIEW 6.0/7.0, with sample programs in VB, VC, BCB, and Delphi. - **PCI Bus Interface:** Fully compliant with PCI specifications, supporting plug-and-play configuration and automatic resource allocation. - **EEPROM-Based Board Identification:** Each card includes a unique serial number stored in EEPROM for easy identification and configuration. - **Diagnostic Utility:** PCI Scan Utility for resource monitoring, serial number identification, and troubleshooting. - **Compact Design:** 185 mm × 110 mm PCB form factor for easy integration into standard PC chassis. - **RoHS Compliant:** Environmentally friendly design meeting Restriction of Hazardous Substances standards.

Hersteller: Axiom

Kategorie: Counter/Timer PCI

- **Ten Independent 16-bit Timer/Counters:** Each counter can operate independently or be cascaded for extended bit-width timing (up to 160-bit when all are cascaded). - **Cascaded 32-bit Timer:** Two counters (channels 11 and 12) are hardware-cascaded to form a 32-bit timer with a fixed 8 MHz base clock. - **Flexible Clock Source Selection:** Each counter can select its clock source from: - On-board 8 MHz oscillator - External clock input (up to 10 MHz) - Output of the previous counter (for cascading) - Cascaded 32-bit timer output - **Programmable De-bounce Filters:** Eleven channels of programmable de-bounce filters for external clock and interrupt inputs, with glitch rejection and programmable de-bounce clock up to 2 MHz. - **Dual Interrupt System:** Two interrupt sources—external interrupt input and cascaded counter output (counter #12)—allow flexible event handling and watchdog timer functionality. - **Digital I/O Capability:** - 8 TTL-compatible digital input channels - 8 TTL-compatible digital output channels - Programmed I/O data transfer mode - **High Reliability and Noise Immunity:** De-bounce filtering and TTL-level compatibility ensure stable operation in industrial environments. - **Plug-and-Play PCI Interface:** Fully compliant with PCI Local Bus Specification Rev. 2.0, supporting automatic resource allocation by BIOS. - **Software Support:** Comprehensive driver and library support for multiple operating systems and development environments, including LabVIEW®, HP-VEE™, and ActiveX (DAQBench™).

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer PCI

- **12 Programmable Counters:** Four onboard 82C54 timer/counter chips provide twelve 16-bit down counters. Ten counters operate independently, while two (counters #11 and #12) are cascaded to form a 32-bit timer. - **Flexible Counter Configuration:** Each counter can be configured as independent or cascaded. Clock sources can be selected from internal 8 MHz, external input, previous counter output, or programmable CK1 source. - **Cascaded 32-bit Timer:** Counters #11 and #12 are cascaded by default, providing a 32-bit timer with a fixed 8 MHz base clock for extended timing range. - **Programmable Clock Sources:** Each counter can select from four clock sources: 1. Onboard 8 MHz clock 2. External clock (up to 10 MHz)

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer PXI/PXIe/cPCI

- **CompactPCI 3U Eurocard Form Factor:** Fully compliant with PICMG 2.0 R3.0 CompactPCI specifications. - **Four Onboard 8254 Programmable Timer/Counter Chips:** Provides twelve 16‑bit down counters or frequency dividers. - **10 Independent 16‑bit Counters + 2 Cascaded Counters:** Ten channels can operate independently or be cascaded; two additional counters (11 and 12) are cascaded by default to form a 32‑bit timer. - **Flexible Clock Source Selection:** Each counter can select from four clock sources—external clock, previous counter output, CK1, or COUT10. - **Onboard 8 MHz Clock Source:** Provides a stable internal reference for timing operations. - **Programmable De‑bounce Filters:** Eleven channels of glitch‑filtered external clock and interrupt inputs, with programmable de‑bounce clock up to 2 MHz. - **Dual Interrupt System:** Two interrupt sources—external interrupt input and output of counter #12—allow flexible event handling. - **Digital I/O Capability:** 8‑channel TTL digital inputs and 8‑channel TTL digital outputs for control and monitoring. - **Rear I/O Connectivity:** 100‑pin SCSI‑II female connector for all I/O signals, including +5 V and +12 V power outputs with resettable fuses. - **Software Support:** Comprehensive driver and library support for Windows and Linux, including DAQPilot, DAQBench, LabVIEW™, MATLAB®, and PCIS‑DASK. - **Operating System Compatibility:** Windows 7/Vista/XP/2000/2003, Windows CE (on request), and Linux. - **Applications:** Event counting, frequency generation, pulse width measurement, watchdog timer, baud‑rate generation, and industrial automation.

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer PXI/PXIe/cPCI

- **12 Programmable Counters/Timers:** Four 8254 chips provide twelve 16‑bit down counters. Default configuration includes two chips (six counters), expandable to four chips (twelve counters). - **Flexible Counter Configuration:** Each counter can operate independently or in cascaded mode. Clock and gate sources can be internal, external, or cascaded from other counters. - **Digital I/O Capability:** - 16 digital input channels (shared with external clock/gate lines). - 8 dedicated digital output channels. - All I/O are TTL‑compatible. - **Dual Interrupt System:** Two interrupt sources selectable via jumpers: - High IRQ from /COUT6 (reversed output of cascaded counter). - Low IRQ from COUT12 or external interrupt (ECLK10). - IRQ levels selectable from IRQ3–15. - **Clock System:** Internal 10 MHz oscillator with selectable frequency dividers (2 MHz, 1 MHz, 100 kHz). External or cascaded clock sources supported. - **Compact ISA Half‑Size Form Factor:** Dimensions 163 mm (L) × 108 mm (W). - **Connector Interface:** One 37‑pin D‑type female connector (CN1) for all counter, gate, clock, and DIO signals. - **Software Support:** Comprehensive C/C++ library and DLLs for DOS, Windows 3.1, Windows 95, and Windows NT. Functions include counter read/write, digital I/O, interrupt handling, and mode configuration. - **Applications:** Event counting, frequency generation, pulse width and frequency measurement, watchdog timing, industrial automation, and laboratory instrumentation.

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer ISA

- **Six 16‑bit programmable counters/timers** using two 8254 chips (expandable to 12 counters with four chips). - **Flexible counter configuration:** each counter can operate independently or in cascaded mode for 32‑bit timing. - **Selectable clock sources:** internal 10 MHz oscillator divided to 2 MHz, 1 MHz, or 100 kHz; external clock input; or cascaded counter output. - **Gate control flexibility:** each counter can be gated by external signals, internal cascaded outputs, or default enabled. - **Dual interrupt system:** two independent interrupt sources selectable from internal or external events, assignable to IRQ3–15. - **Digital I/O capability:** 16 TTL‑compatible digital inputs and 8 TTL‑compatible digital outputs. - **Synchronized frequency measurement:** up to four channels can be measured simultaneously using internal gate synchronization. - **Compact half‑size ISA form factor** for AT‑bus systems. - **Standard 37‑pin D‑type female connector** for all counter, gate, clock, and digital I/O signals. - **Low power consumption:** +5 V @ 210 mA maximum. - **Software support:** C/C++ libraries and drivers for DOS, Windows 3.1, Windows 95, and Windows NT. - **Applications:** event counting, frequency generation, pulse width and frequency measurement, watchdog timing, and industrial automation control.

Hersteller: Adlink Technology Inc.

Kategorie: Counter/Timer ISA

- **Five Independent 16-bit Counters/Timers:** Each channel operates independently, allowing simultaneous measurement or control of multiple signals. - **Programmable Am9513APC Chip:** Utilizes the industry-standard Am9513APC programmable counter/timer device, known for its reliability and flexibility in timing and counting applications. - **High-Speed Operation:** Supports input clock frequencies up to 7 MHz, enabling precise timing and high-resolution event counting. - **Selectable Clock Sources:** Configurable for 1 MHz, 2 MHz, or 4 MHz internal clock operation, providing flexibility for different timing resolutions and performance requirements. - **Up/Down Counting and Cascading:** Each counter can operate in up-counting or down-counting mode, with the ability to cascade counters for extended bit-width counting (e.g., 32-bit or higher). - **Interrupt (IRQ) Capability:** Supports interrupt generation for event-driven applications, allowing efficient CPU utilization and real-time response. - **TTL-Level I/O:** Provides 8 input and 8 output TTL-compatible lines for direct digital interfacing with external devices, sensors, or controllers. - **Standard 50-Pin Connector:** Ensures compatibility with common ribbon cable assemblies and breakout boards for easy integration. - **Software Support:** Includes driver support for Basic, C, and Pascal programming environments, simplifying software development and integration. - **Compact Form Factor:** Designed with a 99 mm × 99 mm board size, suitable for compact system enclosures and embedded installations.

Hersteller: Axiom

Kategorie: Counter/Timer ISA