ExpertDAQ Digital Input module communicates via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, The EX9041 has isolated inputs on 14 channels and was developed for use in a wide temperature range, Features: 14 digital inputs, all inputs isolated, extended temperature range, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **14 Isolated Digital Inputs:** Each input channel is electrically isolated, ensuring signal integrity and protection against ground loops and electrical noise. - **High Isolation Voltage:** 3750 Vrms isolation between channels and system, providing strong protection for industrial environments. - **LED Indicators:** Each input channel has a dedicated LED for real-time status visualization. - **RS-485 Communication Interface:** Two-wire RS-485 interface supporting up to 256 modules on a single network. - **Long-Distance Communication:** Supports cable lengths up to 1200 meters without a repeater. - **Flexible Power Supply:** Operates from +10 VDC to +30 VDC, suitable for various industrial power systems. - **Low Power Consumption:** Typical consumption of only 0.9 W, optimizing energy efficiency. - **Wide Operating Temperature Range:** -25°C to +75°C, suitable for demanding industrial environments. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system reliability. - **Manual or Software Configuration:** Parameters can be set via commands or configuration software. - **Modbus RTU Support (EX9041D-M variant):** Enables integration with Modbus-based control systems. - **EEPROM Configuration Storage:** Retains settings such as address, baud rate, and data format even after power loss. - **INIT* Mode:** Simplifies recovery and reconfiguration if communication settings are lost. - **Latch and Counter Functions:** Supports digital input latching and counting for pulse or event detection. - **Extended Protocol Support:** ASCII command set and Modbus RTU for flexible integration.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **13 Isolated Digital Output Channels:** Each channel is electrically isolated to prevent interference and ensure safe operation in industrial environments. - **Open Collector Outputs:** NPN transistor outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **High Isolation Voltage:** 3750 Vrms isolation between channels and communication interface for superior electrical protection. - **RS-485 Communication Interface:** Two-wire half-duplex communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected in a single RS-485 network; cable length can be extended by 1200 m using a repeater. - **LED Indicators:** Each output channel has a dedicated LED for real-time status monitoring. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor applications. - **Low Power Consumption:** Typical power usage of only 1.6 W. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and system safety. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and type even after power loss. - **Manual or Software Configuration:** Can be configured via serial commands or supplied configuration software. - **INIT* Mode:** Simplified reconfiguration mode accessible via rear switch or INIT pin connection. - **Power Supply Flexibility:** Operates from a 10–30 VDC power source. - **Modbus RTU Compatibility (EX9042D-M variant):** The EX9042D-M supports Modbus RTU protocol for integration with standard PLCs and SCADA systems.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **16 Digital Output Channels:** Each channel is a non-isolated open-collector transistor output (NPN type) capable of sinking up to 100 mA at 30 V DC. - **RS-485 Communication:** Two-wire serial interface supporting multiple baud rates (1200 bps to 115.2 kbps). - **Protocol Support:** - EX9043D: ASCII command protocol. - EX9043D-M: ASCII and Modbus RTU selectable via EEPROM. - **High Channel Density:** Compact 16-channel configuration for efficient space utilization in control panels. - **Extended Temperature Range:** Operates reliably from −25 °C to +75 °C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail-safe output states. - **EEPROM Configuration Storage:** Retains module address, baud rate, and other settings even after power loss. - **LED Indicators:** 16 status LEDs display the state of each digital output channel for quick diagnostics. - **Flexible Power Supply:** Operates from +10 V DC to +30 V DC with low power consumption (1.1 W for EX9043D, 1.2 W for EX9043D-M). - **INIT* Mode:** Simplifies module reconfiguration and recovery of forgotten settings. - **Manual or Software Configuration:** Adjustable via jumpers, rear switches, or configuration commands. - **High Isolation Voltage:** 3750 Vrms isolation between communication and I/O circuitry for noise immunity. - **Compact and Rugged Design:** Built for industrial-grade reliability and long-term deployment.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **16 Digital Output Channels:** Provides 16 non-isolated, single-ended open-collector outputs for flexible control of external devices. - **Open Collector Transistor Outputs:** NPN-type outputs capable of sinking up to 100 mA per channel at voltages up to 30 VDC. - **RS-485 Communication Interface:** Two-wire serial communication supporting multiple baud rates (1200 to 115200 bps). - **Network Scalability:** Up to 256 modules can be connected within a single RS-485 network, with a maximum cable length of 1200 meters without a repeater. - **LED Indicators:** Each output channel has a dedicated LED for visual status indication. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC, allowing flexible integration into various power systems. - **Low Power Consumption:** Typical consumption of 1.1 W (EX9043D) or 1.2 W (EX9043D-M). - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial environments. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and data format. - **INIT* Mode:** Provides a recovery mode for resetting configuration parameters when communication settings are lost. - **Manual or Software Configuration:** Can be configured via jumpers, ASCII commands, or ExpertDAQ configuration software. - **Modbus RTU Support (EX9043D-M):** Enables integration with standard Modbus-based control systems. - **LED Display for Each Channel:** Facilitates quick diagnostics and monitoring of output states. - **Compact and Rugged Design:** Built for industrial reliability and long-term operation.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **Digital I/O Configuration:** 4 isolated digital input channels and 8 isolated open-collector digital output channels. - **Isolation Protection:** 3750 Vrms photo-isolation between channels and logic circuitry, ensuring high noise immunity and protection against ground loops. - **Communication Interface:** RS-485, 2-wire half-duplex communication supporting up to 256 modules per network segment. - **Protocol Support:** - EX9044D: Proprietary ASCII command set. - EX9044D-M: Modbus RTU protocol support for standard industrial communication. - **Output Characteristics:** Open-collector NPN transistor outputs capable of sinking up to 375 mA per channel at voltages up to 30 VDC. - **Input Characteristics:** Optically isolated inputs with 3 kΩ impedance, supporting logic levels from 4 V to 30 V for high and below 1 V for low. - **LED Indicators:** 12 status LEDs (one per channel) for real-time monitoring of input and output states. - **Power Supply:** Operates from a wide 10–30 VDC supply range with low power consumption (1.5–1.7 W typical). - **Watchdog Protection:** Dual watchdog system (hardware and software) ensures continuous operation and safe-state fallback in case of communication or system failure. - **Extended Temperature Range:** Designed for industrial environments with operating temperatures from -25°C to +75°C and storage temperatures from -30°C to +75°C. - **Configuration Flexibility:** Supports manual configuration via DIP switches or software commands. EEPROM stores configuration parameters such as address, baud rate, and data format. - **Network Scalability:** Up to 256 modules can be daisy-chained on a single RS-485 bus, with a maximum cable length of 1200 meters without repeaters.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Digital Inputs (Sink Type):** Accepts logic levels from +4V to +30VDC, with a maximum logic low threshold of +1VDC. - **8 Digital Outputs (Source Type):** Open-collector PNP transistor outputs capable of sourcing up to 30–50mA per channel at +10V to +30VDC. - **RS-485 Communication Interface:** Two-wire half-duplex serial interface supporting baud rates from 1200 to 115.2Kbps. - **Protocol Support:** Operates in ASCII command mode or Modbus RTU mode (selectable via INIT* switch). - **LED Indicators:** 16 status LEDs (8 for inputs, 8 for outputs) provide real-time channel state visualization. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration parameters even after power loss. - **Wide Power Supply Range:** Operates from +10VDC to +30VDC with a typical power consumption of 1.9W. - **Extended Temperature Range:** Designed for operation from -25°C to +75°C, with storage capability down to -30°C. - **Compact and Durable Design:** Suitable for DIN-rail or panel mounting in industrial control cabinets. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safety and Reliability:** Includes short-circuit protection on outputs and diode protection recommendations for inductive loads.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Digital Inputs (Source Type):** Non-isolated, single-ended channels with common ground. - **8 Digital Outputs (Sink Type):** Open-collector NPN transistor outputs, non-isolated, capable of driving external loads. - **RS-485 Communication Interface:** Two-wire half-duplex serial communication supporting multiple baud rates (1200–115200 bps). - **Network Scalability:** Supports up to 256 modules on a single RS-485 network segment (up to 1200 m without repeater). - **LED Indicators:** 16 status LEDs (one per input/output channel) for real-time signal monitoring. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC with low power consumption (~1.9 W). - **Extended Temperature Range:** Designed for harsh environments, operating from -25°C to +75°C. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and fail-safe output control. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings after power loss. - **INIT* Mode:** Hardware switch for resetting configuration or entering initialization mode for reprogramming. - **Manual or Software Configuration:** Configurable via ASCII commands or ExpertDAQ configuration utility. - **Safe and Power-On Values:** User-definable output states for startup and communication timeout conditions. - **Modbus RTU Support (EX9050HD-M variant):** Enables integration with standard Modbus-compatible PLCs, HMIs, and SCADA systems. - **Compact and Durable Design:** Industrial-grade enclosure suitable for DIN-rail or panel mounting.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Isolated Digital Inputs:** The EX9052 provides eight optically isolated digital input channels. The EX9052D variant offers six differential and two single-ended inputs with a common ground, while the EX9052D-M variant provides eight fully differential isolated inputs. - **High Isolation Voltage:** Each input channel is isolated up to **3750 Vrms**, ensuring reliable operation in electrically noisy industrial environments and protecting both the module and connected equipment. - **Wide Input Voltage Range:** The module accepts digital input signals from **+4 VDC to +30 VDC** for logic high (ON) and recognizes logic low (OFF) below **+1 VDC**. - **RS-485 Communication Interface:** Supports **2-wire RS-485** communication with selectable baud rates from **1200 to 115200 bps**, allowing up to **256 modules** to be connected on a single RS-485 network with a maximum cable length of **1200 meters** (without repeater). - **Low Power Consumption:** Operates efficiently with a typical power consumption of **1.2 W**, minimizing heat generation and energy usage. - **Wide Operating Temperature Range:** Designed for harsh industrial environments, the EX9052 operates reliably between **-25°C and +75°C**, with storage capability from **-30°C to +75°C**. - **Dual Watchdog System:** Incorporates both hardware and software watchdogs to ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains configuration parameters such as address, baud rate, and protocol settings even after power loss. - **LED Status Indicators:** Eight front-panel LEDs provide real-time visual feedback of digital input channel states. - **Flexible Protocol Support:** - EX9052D: ASCII command protocol - EX9052D-M: Modbus RTU protocol (default after power-on) - **INIT* Mode for Configuration Recovery:** A dedicated INIT* switch allows users to reset or reconfigure communication parameters easily.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

- **8 Isolated Digital Inputs:** Six differential and two single-ended channels with common ground, providing flexible signal interfacing for various sensor types and logic levels. - **High Isolation Protection:** 3750 Vrms optical isolation between channels and system logic ensures reliable operation and protection against ground loops and electrical noise. - **Wide Input Voltage Range:** Accepts digital logic levels from +4 VDC to +30 VDC for logic high (ON) and below +1 VDC for logic low (OFF), compatible with TTL, CMOS, and open-collector signal sources. - **RS-485 Communication Interface:** Two-wire half-duplex RS-485 interface supporting up to 256 modules on a single network segment (without repeater) and cable lengths up to 1200 meters. - **Flexible Communication Protocols:** - EX9052D: ASCII command set for direct serial control. - EX9052D-M: Modbus RTU protocol for standardized industrial communication. - **LED Channel Indicators:** Eight front-panel LEDs provide real-time visual feedback of input channel status. - **Low Power Consumption:** Typical power consumption of 1.2 W at 10–30 VDC supply voltage. - **Extended Temperature Range:** Operates reliably from -25°C to +75°C, suitable for industrial and outdoor environments. - **Dual Watchdog System:** Hardware and software watchdogs ensure continuous operation and automatic recovery from communication or system faults. - **EEPROM Configuration Storage:** Retains module address, baud rate, and configuration settings even after power loss. - **Compact and Rugged Design:** Built for DIN-rail or panel mounting, with robust housing suitable for industrial control cabinets.

Hersteller: TOPSCCC

Kategorie: Module AD DIO

ExpertDAQ Digital Input module communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053 has 16 channels with a low input impedance and was developed for use in a wide temperature range, features: 16 digital inputs, all inputs isolated, extended temperature range, low input impendance, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO

ExpertDAQ Digital Input modules communicate via RS485 and are available with Modbus RTU, Within one RS485-network up to 256 modules may be controlled, Without a RS485 Repeater the maximum cable length is 1200m, The RS485 Digital IO module are sturdy, power saving and easy to use, the EX9053D has 16 channels with a low input impedance, The Digital Input RS485 module has a LED-display for each channel and was developed for use in a wide temperature range, features: 16 digital inputs, LED-display for each channel, extended temperature range, low input impendance, Digital Level 0:

Hersteller: TOPSCCC

Kategorie: Module AD DIO