- **All-in-One Slot CPU Card:** Integrates CPU, memory, storage interface, and I/O ports on a single board for compact system design. - **Processor Compatibility:** Supports 486-class CPUs including Intel, Cyrix, TI, and AMD variants (DX2, DX4, DX5, and P5). - **Memory Expandability:** Accommodates 1 MB to 128 MB of EDO or Fast Page Mode DRAM using two 72-pin PS/2 SIMM sockets. - **Integrated Storage Options:** - M-Systems DiskOnChip flash disk support (1 MB to 12 MB capacity). - E-IDE interface for connecting standard hard disk drives (HDDs). - Floppy Disk Drive (FDD) interface for legacy storage devices. - **Comprehensive I/O Connectivity:** - Two serial ports (2 × RS-232). - One parallel port (LPT). - Keyboard and mouse connectors. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from software failures. - **PC/104 Expansion Connector:** Enables modular expansion with PC/104 peripheral modules for additional I/O, communication, or control functions. - **Compact Form Factor:** Board dimensions of 185 mm × 122 mm, suitable for embedded chassis and industrial enclosures. - **Legacy System Compatibility:** Designed for integration into existing industrial systems requiring 486-level performance and ISA/PC/104 compatibility.

Hersteller: Lanner

Kategorie: Slot-CPUs

- **Compact Half-Size Slot CPU Card:** Designed to fit standard half-size ISA or passive backplane slots (dimensions 185 mm × 122 mm). - **High-Performance 486-Class Processor:** Equipped with an AMD X5 133 MHz CPU, offering robust performance for DOS, early Windows, and real-time operating systems. - **Integrated VGA/LCD Display Controller:** Built-in Intel/Chips & Technologies 65550 graphics chipset supports both CRT VGA and flat-panel LCD displays. - **Flexible Memory Configuration:** Supports 1 MB to 128 MB of EDO or Fast Page DRAM via two 72-pin PS/2 SIMM sockets. - **Onboard Flash Disk Option:** M-Systems DiskOnChip flash storage option from 1 MB to 12 MB capacity for solid-state boot and data storage. - **Comprehensive I/O Interfaces:** - Two serial ports (1 × RS-232, 1 × configurable RS-232/422/485) - One parallel port - Keyboard and mouse connectors - Ethernet 10Base-T LAN (Realtek RTL8029AS chipset) - E-IDE HDD and FDD interfaces for standard storage devices - **PC/104 Expansion Connector:** Enables modular expansion with PC/104 peripheral modules for additional I/O, communication, or control functions. - **Hardware Watchdog Timer:** Ensures system reliability by automatically resetting the system in case of software failure. - **Industrial-Grade Design:** Engineered for long-term operation in embedded and industrial environments with extended temperature and vibration tolerance.

Hersteller: Lanner

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel, Cyrix, and AMD 586-class CPUs with MMX technology, operating from 75 MHz up to 233 MHz. - **Chipset:** Intel 430TX chipset, providing stable system architecture and compatibility with legacy operating systems and peripherals. - **Memory Support:** Four 72-pin PS/2 SIMM sockets supporting 8 MB to 128 MB of system memory. - **Cache Memory:** 512 KB SRAM secondary cache for improved data throughput and CPU performance. - **Display Interface:** Integrated VGA controller for direct video output to standard displays. - **LCD Interface:** Onboard LCD interface for embedded or panel-mounted display integration. - **Communication Ports:** - Two serial ports (COM1 and COM2) using 16550 UARTs. - COM1 supports RS-232. - COM2 is configurable for RS-232, RS-422, or RS-485 communication modes. - **Parallel Port:** One parallel port supporting SPP, EPP, and ECP modes for printers or parallel devices. - **Peripheral Interfaces:** PS/2 mouse and keyboard connectors for standard input devices. - **Storage Interfaces:** IDE interface for hard disk drives and FDD interface for floppy drives. - **Watchdog Timer:** Programmable watchdog timer adjustable from 0 to 30 seconds for system reliability and automatic recovery. - **Bus Compatibility:** Supports PICMG, PC/104, and ISA bus standards for modular expansion and system integration. - **Form Factor:** Full-size slot CPU board with dimensions of 335 mm x 122 mm.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel, Cyrix, and AMD 586-class CPUs operating from 75 MHz up to 233 MHz, including MMX-enabled processors. - **Chipset:** Integrated Intel 430TX chipset for stable system performance and memory management. - **Memory Support:** Two 72-pin PS/2 SIMM sockets supporting 8 MB to 128 MB of system memory. - **Cache Memory:** 512 KB SRAM cache for enhanced data throughput and reduced latency. - **Display Controller:** Onboard LCD/VGA controller based on the C&T 65550 chipset, providing both CRT and flat-panel display support. - **Storage Interfaces:** Integrated IDE interface for HDD and FDD connections. - **Multi-I/O Controller:** SMC37C669 chipset providing serial, parallel, and PS/2 interfaces. - **Serial Ports:** Two serial ports (COM1 and COM2) with flexible configuration: - COM1: RS-232 - COM2: Selectable RS-232/RS-422/RS-485 - **Parallel Port:** One parallel port supporting SPP, EPP, and ECP modes. - **Peripheral Interfaces:** PS/2 mouse and keyboard connectors. - **Watchdog Timer:** Programmable watchdog timer adjustable from 0 to 30 seconds for system reliability and automatic recovery. - **Bus Interface:** Supports PC/104 and/or ISA bus for expansion and peripheral integration. - **Form Factor:** Half-size slot CPU card with dimensions of 185 mm x 122 mm. - **Integrated LCD/VGA Output:** Enables direct connection to both CRT monitors and LCD panels without additional graphics hardware.

Hersteller: TMC

Kategorie: Slot-CPUs

- **586-Class CPU Support:** Compatible with Intel, Cyrix, and AMD processors operating from 75 MHz up to 233 MHz, including MMX-enabled CPUs. - **Intel 430TX Chipset:** Provides stable and proven platform support for 586 architecture, ensuring compatibility with a wide range of legacy and industrial software. - **Memory Expansion:** Supports 8 MB to 128 MB of system memory via four 72-pin PS/2 SIMM sockets, allowing flexible configuration for various application requirements. - **512 KB SRAM Cache:** Onboard secondary cache enhances system performance and data throughput. - **Integrated LCD/VGA Controller:** Features a C&T 65550 graphics controller supporting both CRT and LCD displays, enabling embedded display integration without additional graphics cards. - **Comprehensive I/O Support:** - Two serial ports (COM1 and COM2) using 16550 UARTs. - COM1 supports RS-232. - COM2 configurable for RS-232, RS-422, or RS-485 communication. - One parallel port supporting SPP, EPP, and ECP modes. - PS/2 mouse and keyboard interfaces. - **Storage Interfaces:** Integrated IDE interface for HDD/SSD and FDD controller for floppy drives. - **Watchdog Timer:** Programmable watchdog timer adjustable from 0 to 30 seconds for system reliability and automatic recovery. - **Bus Compatibility:** Supports PICMG, PC/104, and ISA bus standards, ensuring broad compatibility with industrial backplanes and expansion modules. - **Compact Full-Size Slot Form Factor:** Dimensions of 335 mm × 122 mm, designed for standard industrial chassis and backplane systems.

Hersteller: TMC

Kategorie: Slot-CPUs

786 full size slot CPU, 233-800MHz Intel PII/PIII MMX, Intel 82440BX chipset, 32MB-256MB 2*DIMMs, 512 SRAM cache, IDE-HDD/FDD, 2ser 16550, 1par SPP/EPP/ECP, PS/2 mouse, kbd, watchdog 0-30s, PICMG and PC/104 and ISA bus, 338*122mm

Hersteller: TMC

Kategorie: Slot-CPUs

- **Processor Support:** Compatible with Intel Pentium III and Celeron processors using the Socket 370 (FCPGA) interface, supporting clock speeds from 300 MHz up to 800 MHz. - **Chipset:** Utilizes the Intel 82440BX chipset, known for its stability, performance, and compatibility with a wide range of industrial applications. - **Memory Capacity:** Supports 32 MB to 768 MB of SDRAM through three DIMM slots, allowing flexible memory configurations for various performance requirements. - **Integrated Graphics:** Onboard VGA controller provides direct video output, eliminating the need for a separate graphics card and simplifying system integration. - **Integrated Networking:** Built-in LAN interface for Ethernet connectivity, enabling network communication and remote management. - **Cache Memory:** Equipped with 512 KB of SRAM cache to enhance CPU performance and data throughput. - **Storage Interfaces:** Supports IDE hard disk drives (HDD) and floppy disk drives (FDD), ensuring compatibility with legacy storage devices. - **Serial and Parallel Ports:** Includes two serial ports (16550 UART compatible) and one parallel port supporting SPP, EPP, and ECP modes for peripheral connectivity. - **Peripheral Interfaces:** Provides PS/2 ports for mouse and keyboard connections. - **Watchdog Timer:** Integrated watchdog timer with a configurable timeout range of 0–30 seconds for system reliability and automatic recovery in case of software failure. - **Bus Compatibility:** Fully compliant with PICMG, PC/104, and ISA bus standards, ensuring broad compatibility with industrial backplanes and expansion modules. - **Form Factor:** Full-size slot CPU board measuring 338 mm x 122 mm, designed for industrial chassis and backplane systems.

Hersteller: TMC

Kategorie: Slot-CPUs

786 full size slot CPU, 300-800MHz FCPGA Socket370, Intel CPU P-III or Celeron, Intel 82440BX chipset, 32MB-768MB 3*DIMMs, 512 SRAM cache, IDE-HDD/FDD, 2ser 16550, 1par SPP/EPP/ECP, PS/2 mouse, kbd, watchdog 0-30s, PICMG and PC/104 and ISA bus, 338*122mm

Hersteller: TMC

Kategorie: Slot-CPUs

- **Processor Support:** Socket 370 interface supporting Intel Celeron processors from 300 MHz to 700 MHz, providing scalable performance for various industrial workloads. - **Chipset:** Intel 82440BX chipset, known for its stability, compatibility, and proven performance in embedded and industrial PC applications. - **Memory Capacity:** Three DIMM sockets supporting 32 MB to 768 MB of SDRAM, allowing flexible memory configurations for different application requirements. - **Storage Interfaces:** Integrated IDE interface for HDD and FDD connections, supporting standard ATA hard drives and floppy drives for legacy compatibility. - **Serial and Parallel Interfaces:** Two serial ports (16550 UART compatible) and one parallel port supporting SPP, EPP, and ECP modes, enabling connection to a wide range of industrial peripherals and legacy devices. - **Peripheral Interfaces:** PS/2 ports for mouse and keyboard connectivity, ensuring compatibility with standard input devices. - **Watchdog Timer:** Configurable watchdog timer with a range of 0–30 seconds, providing system reliability and automatic recovery in case of software or hardware faults. - **Expansion Buses:** - PICMG bus interface for backplane connectivity. - PC/104 bus for stackable embedded expansion modules. - ISA bus for legacy peripheral support. - **Micro-PCI Module Bays:** Two micro-PCI module bays for additional functionality or custom I/O expansion. - **Form Factor:** Full-size slot CPU module with dimensions of 338 mm × 122 mm, designed for standard industrial chassis and backplane systems. - **Industrial Design:** Rugged construction suitable for continuous operation in industrial environments, with long-term component availability and support.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Chipset:** Realtek RTL8139B – a proven, widely supported Fast Ethernet controller offering high compatibility and stable performance. - **Network Interface:** 10/100 Mbps Ethernet (IEEE 802.3u compliant) supporting both half-duplex and full-duplex operation. - **Form Factor:** Micro-PCI (Mini PCI) module – compact design optimized for embedded and industrial systems. - **Bus Interface:** 32-bit PCI bus, compliant with PCI 2.2 specification, supporting 33 MHz operation. - **Auto-Negotiation:** Automatically detects and configures link speed (10/100 Mbps) and duplex mode. - **Wake-on-LAN (WOL):** Supports remote wake-up functionality for power management and remote system activation. - **Low Power Consumption:** Optimized for embedded systems with limited power budgets. - **Driver Support:** Compatible with major operating systems including Windows, Linux, and various real-time operating systems (RTOS). - **Compact Design:** Ideal for space-constrained environments such as industrial PCs, panel PCs, and embedded controllers. - **High Reliability:** Designed for continuous operation in demanding industrial and embedded environments.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Ultra-2 SCSI Interface:** Supports the Ultra-2 SCSI standard, enabling data transfer rates up to 80 MB/s (40 MHz, 16-bit LVD). - **Initio INIC-1060P Chipset:** Incorporates the proven Initio INIC-1060P SCSI controller, known for its high reliability, low latency, and efficient bus management. - **Micro-PCI Form Factor:** Compact design optimized for embedded and industrial systems where space and power efficiency are critical. - **Backward Compatibility:** Fully compatible with legacy SCSI devices (Ultra, Fast, and Narrow SCSI), ensuring seamless integration with existing hardware. - **Low Voltage Differential (LVD) Signaling:** Supports LVD and single-ended (SE) signaling for flexible connectivity and improved noise immunity. - **High Reliability:** Designed for continuous operation in demanding environments, with robust electrical and thermal characteristics. - **Plug-and-Play Integration:** Simplified installation and configuration through standard PCI interface protocols. - **Multi-Device Support:** Capable of addressing multiple SCSI targets and initiators, supporting complex device chains. - **Optimized for Embedded Systems:** Ideal for OEMs and system integrators requiring a compact, high-speed SCSI interface solution.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Compact Micro-PCI Form Factor:** Designed for embedded and industrial systems where space efficiency is critical. - **Integrated C&T 69000 Graphics Chipset:** Proven, low-power VGA controller supporting both analog CRT and digital LCD displays. - **Dual Display Support:** Capable of driving CRT monitors and flat-panel LCDs, offering flexibility in display configurations. - **2 MB SDRAM Video Memory:** Onboard memory ensures smooth rendering of standard VGA and SVGA resolutions without external memory requirements. - **High Compatibility:** Fully compatible with standard VGA signaling and timing, ensuring broad support across operating systems and embedded platforms. - **Low Power Consumption:** Optimized for embedded environments where thermal and power efficiency are essential. - **Stable and Reliable Operation:** Industrial-grade design for continuous operation in demanding environments. - **Plug-in Daughter Card Design:** Easily integrates with host boards via Micro-PCI interface, simplifying system design and upgrades.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Dual-function module:** Integrates both VGA display and Ethernet networking on a single Micro-PCI daughter card, reducing component count and saving board space. - **Graphics Controller:** Equipped with the **C&T69000** (Chips & Technologies) VGA controller, supporting both **CRT** and **LCD panel** outputs. - **Video Memory:** Includes **2 MB of onboard SDRAM**, enabling smooth 2D graphics rendering and display output for embedded applications. - **Display Support:** Compatible with analog CRT monitors and flat-panel LCD displays, supporting standard VGA resolutions and color depths. - **Ethernet Controller:** Incorporates the **Realtek RTL8139B** chipset, providing **10/100 Mbps Fast Ethernet** connectivity with full-duplex operation. - **Compact Form Factor:** Designed as a **Micro-PCI module**, ideal for embedded systems, industrial controllers, and compact computing environments. - **High Integration:** Combines video and network interfaces into one module, simplifying system design and reducing the need for multiple expansion cards. - **Plug-and-Play Compatibility:** Fully compliant with standard PCI signaling and configuration protocols, ensuring straightforward integration with host systems. - **Low Power Consumption:** Optimized for embedded and mobile applications where energy efficiency and thermal management are critical. - **Reliable Performance:** Proven chipsets (C&T69000 and RTL8139B) ensure stable operation, long-term availability, and broad driver support across multiple operating systems.

Hersteller: TMC

Kategorie: Slot-CPUs

- **Processor Support:** Intel Pentium VI CPU, Socket 478, FCPGA package, operating at 1.6 GHz to 2.4 GHz with a 400 MHz front-side bus (FSB400). - **Chipset:** Intel 845 chipset, providing stable performance and compatibility with legacy and modern peripherals. - **Memory Capacity:** Supports up to 3 GB of SDRAM via three DIMM sockets, allowing flexible memory configurations for demanding applications. - **Integrated Graphics:** Onboard VGA controller with 8 MB ATI Mobile M6 graphics memory, suitable for standard display output and industrial HMI interfaces. - **Networking:** Dual 10/100 Mbps Ethernet interfaces powered by Intel 82559 and Intel 82562EM controllers, enabling redundant or segmented network configurations. - **Storage Interfaces:** IDE interface supporting HDD and FDD devices (ATA100 standard), ensuring compatibility with legacy storage media. - **Peripheral Connectivity:** - Two serial ports (16550 UART compatible) - One parallel port supporting SPP/EPP/ECP modes - PS/2 mouse and keyboard connectors - **System Monitoring:** Integrated watchdog timer adjustable from 0 to 30 seconds for system reliability and automatic recovery. - **Expansion Buses:** Fully compliant with PICMG, PC/104, and ISA bus standards, allowing integration with a wide range of industrial I/O and expansion modules. - **Form Factor:** Full-size slot CPU board with dimensions of 338 mm × 122 mm, designed for industrial backplane systems.

Hersteller: Keine Kategorie

Kategorie: Slot-CPUs

- **Processor Support:** Intel® Core™ 2 Quad / Core™ 2 Duo / Conroe / Conroe-L / Wolfdale processors (LGA775 socket) - **Front Side Bus (FSB):** 800 / 1066 / 1333 MHz - **Chipset:** Intel® Q35 Northbridge + ICH9 Southbridge - **Memory:** Dual 240-pin DDRII DIMM sockets, supporting up to 4 GB DDR2 SDRAM at 667/800 MHz - **Graphics:** Integrated Intel® Graphics Media Accelerator 3100 (GMA3100) - **Storage Interfaces:** - 2 × SATA II ports (300 MB/s transfer rate) - 1 × Ultra ATA 33/66/100 IDE port (supports 1 device) - 1 × Floppy Disk Drive connector - **Networking:** 1 × Realtek 8111B PCIe Gigabit Ethernet (10/100/1000Base-T) - **USB Connectivity:** 12 × USB 2.0 ports (480 Mbps) - **Serial Communication:** - COM1: RS-232 - COM2: RS-232/422/485 selectable via jumper - **Digital I/O:** 4-bit input / 4-bit output (4/4 DIO) - **Expansion Bus:** PICMG 1.0 compliant, supports ISA via PCI bridge (ITE IT8888G) - **Security:** TPM 1.2 support via LPC connector - **Watchdog Timer:** 255-level programmable reset - **BIOS:** AMI Plug and Play Flash BIOS - **Operating Temperature:** 0°C to 60°C (32°F to 140°F) - **Form Factor:** Full-size PICMG 1.0 SBC (338 × 122 mm)

Hersteller: Arbor

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for integration into ISA backplane systems, ensuring compatibility with legacy industrial PCs and embedded controllers. - **Intel 386-Class Processor:** Operates at 40 MHz, providing reliable performance for control, monitoring, and data acquisition tasks. - **Onboard Memory:** Includes 4 MB DRAM onboard, expandable via two single-sided FPM PS/2 RAM sockets up to a total of 64 MB. - **Integrated VGA Controller:** Features a C&T 65545 VGA chipset with 1 MB video memory, supporting resolutions up to 1024 × 768 for LCD or CRT displays. - **Disk-On-Chip (DOC) Socket:** Provides a socket for DiskOnChip solid-state storage, enabling embedded OS or application storage without mechanical drives. - **Comprehensive I/O Interfaces:** - 3 × RS-232 serial ports - 1 × RS-485 serial port - All ports use 16550 UARTs for buffered, high-speed serial communication - 1 × parallel port for printer or peripheral connection - **Peripheral Support:** Mini-DIN keyboard connector and PS/2 mouse interface for standard input devices. - **Storage Interfaces:** 1 × IDE connector for hard drives or CompactFlash adapters, and 1 × FDD connector for floppy drives. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from software faults. - **Power Efficiency:** Operates from a single +5 V DC supply at approximately 1.8 A current draw. - **Compact Form Factor:** 185 mm × 122 mm PCB size, suitable for embedded chassis and industrial enclosures. - **Bus Compatibility:** Supports both ISA and PC/104 expansion standards for modular system integration.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Embedded Socket 7 Architecture:** Supports a range of Socket 7 CPUs from 75 MHz to 450 MHz, providing flexibility for performance and power optimization. - **Chipset:** Utilizes the ALi M1541/1543 chipset, offering stable system performance and compatibility with a wide range of peripheral devices. - **Display Support:** Integrated C&T 69000 graphics controller enables both CRT and flat panel display outputs, supporting various resolutions suitable for industrial HMI and embedded display applications. - **Networking:** Onboard Realtek RTL8139 10/100 Mbps Ethernet controller provides reliable LAN connectivity for networked embedded systems. - **Audio:** Integrated ESS Solo-1 3D audio controller delivers high-quality sound output for multimedia or voice-enabled applications. - **Serial Communication:** Offers multiple serial ports — three RS-232 ports and one configurable RS-232/422/485 port — for flexible industrial communication and device interfacing. - **Expansion Interface:** PC/104 expansion slot allows for modular system expansion with compatible PC/104 peripheral modules. - **Power Input:** Operates on a single +5V DC power supply, simplifying integration into embedded systems with limited power sources. - **Compact Form Factor:** Board dimensions of 203 mm x 146 mm make it suitable for embedded enclosures and custom chassis designs. - **Industrial Reliability:** Designed for continuous operation in embedded environments, with robust component selection and long product lifecycle support.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel LPP, AMD K5, and AMD K6 processors, with clock speeds up to 500 MHz. - **Display Controller:** Integrated Intel C&T 69000 VGA/LCD controller with 2 MB video memory, supporting both CRT and LCD displays. - **Chipset:** ALi M1541/1543 chipset, providing stable performance and compatibility with legacy and modern peripherals. - **Memory Support:** Three 168-pin DIMM sockets supporting standard SDRAM modules for flexible memory configurations. - **Networking:** Onboard Intel 82559 Ethernet controller for 10/100 Mbps network connectivity. - **Storage Interfaces:** IDE interface for HDD and FDD connections, supporting standard ATA hard drives and floppy drives. - **Serial and Parallel Ports:** - Two standard RS-232 serial ports (16550 UART compatible) - One configurable RS-232/422/485 serial port for industrial communication - One parallel port supporting EPP/ECP modes - **Peripheral Interfaces:** PS/2 ports for keyboard and mouse, two USB ports for peripheral expansion. - **Watchdog Timer:** Integrated hardware watchdog for system reliability and automatic recovery in case of software failure. - **Bus Architecture:** Supports both PCI and ISA buses, ensuring compatibility with a wide range of expansion cards and legacy hardware. - **Power Requirements:** Operates on a 5V DC supply with a current draw of approximately 12A. - **Form Factor:** PICMG slot CPU form factor, measuring 338 mm x 122 mm, designed for use in passive backplane systems.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel LPP, AMD K5, and AMD K6 CPUs, offering flexible performance scaling up to **500 MHz**. - **Chipset Architecture:** Utilizes the **ALI M1541/1543** chipset, providing stable system control, memory management, and peripheral integration. - **Graphics Controller:** Integrated **Intel C&T 69000 VGA/LCD controller** with **2 MB video memory**, supporting both CRT VGA and LCD display outputs. - **Networking:** Onboard **Intel 82559 Ethernet controller** for reliable 10/100 Mbps network connectivity. - **Memory Support:** One **168-pin DIMM socket** supporting up to **512 MB SDRAM**, ensuring sufficient memory capacity for embedded and industrial applications. - **Storage Interfaces:** Integrated **IDE** interface for HDD/SSD connection and **FDD** interface for floppy drives, supporting legacy storage devices. - **Serial and Parallel Interfaces:** - Four **RS-232 serial ports** (16550 UART compatible) for communication with industrial devices and peripherals. - One **parallel port** supporting **EPP/ECP** modes for printers or parallel-based devices. - **Peripheral Connectivity:** - **PS/2 ports** for keyboard and mouse. - **Two USB ports** for modern peripheral connectivity. - **System Monitoring:** Integrated **watchdog timer** for system reliability and automatic recovery from software malfunctions. - **Bus Compatibility:** Supports both **PISA** and **ISA** bus standards, ensuring compatibility with a wide range of industrial backplanes and expansion cards. - **Power Requirements:** Operates on **+5V DC**, consuming approximately **12A** current. - **Compact Form Factor:** Board dimensions of **185 mm x 122 mm**, optimized for embedded and industrial chassis integration.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor:** Cyrix Geode GX1 300 MHz low‑power CPU - **Chipset:** Cyrix Geode GX1 with CX5530 companion chipset - **Memory:** One 168‑pin DIMM socket supporting up to 256 MB SDRAM - **Display:** Integrated Cyrix CX5530 VGA controller with 4 MB shared memory, supporting CRT and LCD panels up to 1024 × 768 @ 16‑bit color - **Networking:** Dual Realtek RTL8100 10/100 Base‑T Ethernet controllers - **Audio:** Integrated Cyrix CX5530 3D audio controller with Line‑In, Line‑Out, and Mic‑In connectors - **Storage Interfaces:** - Two IDE channels (ATA/33, up to 33 MB/s) - One FDD interface (supports two floppy drives) - CompactFlash™ socket (IDE interface) - DiskOnChip™ socket (up to 288 MB) - **Serial Communication:** Four COM ports (3 × RS‑232, 1 × RS‑232/422/485 selectable) - **Parallel Port:** One EPP/ECP/SPP‑compatible parallel interface - **USB:** Two USB 1.1 ports - **PC/104 Expansion:** 16‑bit ISA bus compatible PC/104 connectors - **Watchdog Timer:** Hardware WDT with programmable timeouts (1 s – 220 s) and reset/NMI options - **Digital I/O:** 4‑bit GPIO port for user‑defined control - **Power:** Single +5 V DC input (2 A typical) - **Form Factor:** PISA slot CPU card, 185 mm × 122 mm - **Operating Temperature:** 0 °C – 60 °C The HS‑5230/CF integrates all essential PC functions on a single board, providing a compact, fan‑less, and cost‑effective solution for industrial control, automation, and embedded computing.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel LPP, AMD K5, and AMD K6 CPUs, providing flexibility for various performance and power requirements. - **Chipset Architecture:** Built around the **ALI M1541/1543 chipset**, ensuring stable system performance and compatibility with 586-class processors. - **Integrated Graphics:** Equipped with an **Intel C&T 69000 VGA/LCD controller** with **2MB video memory**, supporting both CRT VGA and LCD display outputs. - **Networking Capability:** Onboard **Intel 82559 Ethernet controller** for reliable 10/100 Mbps network connectivity. - **Audio Integration:** Built-in sound support for multimedia or system alert applications. - **Memory Support:** One **168-pin DIMM socket** supporting up to **256MB SDRAM**, allowing sufficient memory for embedded and industrial workloads. - **Storage Interfaces:** Supports **IDE HDD** and **FDD** connections for traditional storage devices. - **Serial and Parallel Interfaces:** - Four **RS-232 serial ports** (16550 UART compatible) - One **parallel port** supporting **EPP/ECP modes** - **Peripheral Connectivity:** - **PS/2 ports** for mouse and keyboard - **Two USB ports** for peripheral expansion - **System Reliability:** Integrated **watchdog timer** for system monitoring and automatic recovery from software malfunctions. - **Bus Compatibility:** Supports both **PISA** and **ISA bus** interfaces, ensuring compatibility with a wide range of legacy backplanes and expansion cards. - **Power Requirements:** Operates on **+5V DC at 12A**, suitable for industrial power environments. - **Compact Form Factor:** Dimensions of **185 mm x 122 mm**, optimized for embedded chassis and industrial enclosures.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor Compatibility:** Supports Intel 786-class CPUs operating between 233 MHz and 650 MHz, providing scalable performance for various industrial and embedded applications. - **Chipset:** Utilizes the Intel 82443BX chipset, known for its stability and compatibility with a wide range of Intel processors and peripheral devices. - **Display Controller:** Integrated Flat Panel Display Controller (C&T69000) supporting both LCD and VGA outputs, enabling direct connection to flat panel displays and CRT monitors. - **Memory Support:** Two 168-pin DIMM sockets supporting up to 1 GB of SDRAM, allowing flexible memory configurations for different performance requirements. - **Storage Interfaces:** Includes IDE interface for HDD and FDD connections, supporting standard 3.5" and 2.5" drives for data storage and system boot. - **Serial and Parallel Ports:** Two serial ports (16550-compatible RS-232) and one parallel port (EPP/ECP mode) for legacy device connectivity. - **Peripheral Interfaces:** PS/2 ports for mouse and keyboard, USB interface for modern peripheral connectivity. - **Watchdog Timer:** Integrated hardware watchdog for system reliability and automatic recovery in case of software or hardware failure. - **Bus Architecture:** Supports both PCI and ISA buses, ensuring compatibility with a wide range of expansion cards and legacy hardware. - **Power Requirements:** Operates on a 5V DC power supply with a current draw of approximately 12A, suitable for industrial backplane environments. - **Compact Form Factor:** Dimensions of 185 mm x 127 mm, designed for PISA slot installation in industrial chassis.

Hersteller: Boser

Kategorie: Slot-CPUs

- **PISA Half-Size Slot CPU Board:** Conforms to the PISA (PCI + ISA) bus standard, enabling hybrid connectivity for both legacy ISA and modern PCI peripherals. - **Integrated LCD/VGA Controller:** Equipped with a **C&T69000 Flat Panel Display Controller**, supporting both CRT and LCD displays for flexible visual output options. - **Ethernet Connectivity:** Onboard Ethernet interface for network communication and remote system management. - **Intel 82443BX Chipset:** Provides stable and proven performance for Pentium-class CPUs, ensuring compatibility with a wide range of industrial applications. - **Processor Support:** Compatible with Intel processors operating between **233 MHz and 550 MHz**, offering scalable performance for various workloads. - **Memory Expansion:** Two **168-pin DIMM sockets** supporting up to **1 GB SDRAM**, allowing for efficient multitasking and data handling. - **Comprehensive I/O Interfaces:** - **2 × Serial Ports (RS-232, 16550 UART compatible)** - **1 × Parallel Port (EPP/ECP mode)** - **PS/2 Mouse and Keyboard Ports** - **USB Interface** - **IDE and FDD connectors** for storage devices - **Watchdog Timer:** Hardware-based system monitoring for automatic recovery from system hangs or failures. - **Power Requirements:** Operates on **+5V DC at 12A**, optimized for industrial power supplies. - **Compact Form Factor:** **185 mm × 127 mm**, suitable for space-constrained enclosures and embedded systems. - **PCI and ISA Bus Support:** Ensures compatibility with a wide range of expansion cards and legacy hardware.

Hersteller: Boser

Kategorie: Slot-CPUs

- **Processor Support:** Designed for Intel® Pentium® M and Celeron® M processors using Socket 479 (S479). - **Chipset:** Integrated Intel® 852GM Northbridge and ICH4 Southbridge, providing stable performance and extended lifecycle support for embedded applications. - **Graphics Controller:** Intel® 852GM integrated VGA/LCD controller with shared memory architecture supporting up to 64 MB of system memory for video. - **Networking:** Dual 10/100 Mbps Ethernet interfaces using Intel® 82562ET and Intel® 82559ER controllers, each with RJ-45 connectors for redundant or segmented network configurations. - **Memory:** One 184-pin DDR DIMM socket supporting up to 1 GB of DDR SDRAM. - **Storage Options:** - Onboard CompactFlash Type II socket for solid-state storage. - IDE interface for HDD and FDD connections. - **I/O Interfaces:** - Three USB 2.0 ports for peripheral connectivity. - Two serial ports: one RS-232 and one configurable RS-232/422/485 port via Winbond W83627HF Super I/O controller. - PS/2 interface for keyboard and mouse (shared port). - **Expansion Bus:** PISA and ISA bus interface for backward compatibility with legacy industrial systems. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery from system hangs. - **Power Requirements:** +5V DC at 12A maximum consumption. - **Form Factor:** Compact PISA slot CPU card measuring 186 mm x 122 mm. These features make the HS-7250 a versatile embedded computing solution, combining modern processing with legacy support for industrial environments.

Hersteller: Boser

Kategorie: Slot-CPUs

- **ISA Slot CPU Board:** Designed for systems utilizing the ISA bus, ensuring compatibility with legacy industrial backplanes and expansion cards. - **Intel 386 Processor (40 MHz):** Provides reliable 32-bit processing performance for embedded control and industrial computing tasks. - **Memory Support:** Two single-sided 72-pin DRAM sockets supporting either FPM (Fast Page Mode) or EDO (Extended Data Out) memory modules, with a total capacity of up to 64 MB. - **Storage Interfaces:** - One IDE connector for hard disk or solid-state storage devices. - One FDD (Floppy Disk Drive) connector for legacy storage support. - Disk-On-Chip (DOC) socket for solid-state flash storage integration, enabling diskless operation. - **I/O Interfaces:** - Two RS-232 serial ports (16550 UART compatible) for communication with serial devices. - One parallel port for printers or general-purpose data transfer. - 16-bit general-purpose Digital Input/Output (DIO) interface for industrial control and signal processing. - **Peripheral Interfaces:** - Mini-DIN keyboard connector for standard PC keyboards. - PS/2 mouse port for pointing device connectivity. - **Watchdog Timer:** Hardware watchdog for system reliability and automatic recovery in case of software failure. - **Power Requirements:** Operates from a single +5V DC supply, consuming approximately 1.8A. - **Form Factor:** Compact 185 mm x 122 mm board size, compatible with ISA and PC/104 mechanical standards. - **Industrial Reliability:** Designed for continuous operation in embedded environments, with robust electrical and mechanical design.

Hersteller: Adlink Technology Inc.

Kategorie: Slot-CPUs