1. Product Overview
Product Name: APC-upgr-C-mobile-1G5Hz
Model: APC-upgr-C-mobile-1G5Hz
Series: APlex Upgrade Series
Article Number: APC-upgr-C-mobile-1G5Hz
Manufacturer: APlex Technology Inc.

The APC-upgr-C-mobile-1G5Hz is a specialized hardware and firmware upgrade module designed for APlex industrial computing devices. It provides an enhanced cellular mobile communication capability operating at 1.5 GHz, enabling improved connectivity, data throughput, and network reliability for APlex embedded systems, industrial PCs, and mobile computing platforms. This upgrade is part of APlex’s modular performance enhancement line, allowing existing APlex devices to be upgraded to support higher-speed mobile communication standards without requiring a full system replacement.

---

2. Key Features
- 1.5 GHz Cellular Upgrade: Enhances APlex devices with mobile communication capability at 1.5 GHz frequency band, supporting improved data transmission and network stability.
- Optimized for APlex Platforms: Fully compatible with APlex industrial PCs, panel PCs, and embedded controllers, ensuring seamless integration with existing hardware and software environments.
- Modular Upgrade Design: Designed as a plug-in or integrated upgrade component, minimizing downtime and simplifying the upgrade process.
- Enhanced Connectivity: Provides reliable mobile network access for remote monitoring, data acquisition, and IoT applications.
- Industrial-Grade Performance: Built to meet industrial environmental standards, ensuring stable operation under extended temperature ranges, vibration, and electromagnetic interference.
- Low Power Consumption: Optimized for energy efficiency, maintaining low thermal output while delivering high-speed communication performance.
- Firmware and Driver Support: Includes updated firmware and driver packages for APlex operating environments, ensuring compatibility with Windows, Linux, and embedded OS platforms.
- Scalable Communication: Supports integration with existing APlex communication modules (Wi-Fi, Ethernet, GPS) for hybrid connectivity solutions.
- Future-Proof Design: Provides a foundation for next-generation mobile communication standards and network protocols.

---

3. Technical Specifications
- Frequency Band: 1.5 GHz (cellular mobile communication band)
- Supported Standards: GSM/UMTS/LTE (depending on APlex device configuration)
- Data Rate: Up to 150 Mbps (downlink) / 50 Mbps (uplink) typical, depending on network conditions
- Interface Type: Internal upgrade interface (APC proprietary connector or mini PCIe slot, depending on model)
- Compatibility: Designed for APlex industrial computing platforms (e.g., APlex series AEx, APC, and ARK models)
- Dimensions: Approx. 80 mm × 50 mm × 10 mm (module form factor)
- Weight: Approx. 45 g
- Material: Industrial-grade PCB with EMI shielding and aluminum heat spreader
- Operating Temperature: −20 °C to +70 °C
- Storage Temperature: −40 °C to +85 °C
- Power Supply: 3.3 V DC or 5 V DC (depending on host system interface)
- Power Consumption: < 5 W typical under full load
- Antenna Interface: SMA or u.FL connector (depending on configuration)
- Certifications: CE, FCC, RoHS compliant
- Firmware Version: Mobile Upgrade Firmware v1.5 or later
- MTBF (Mean Time Between Failures): > 100,000 hours

---

4. Functionality
The APC-upgr-C-mobile-1G5Hz functions as a mobile communication upgrade module that integrates into compatible APlex devices. Once installed, it enables the host system to connect to cellular networks operating in the 1.5 GHz frequency band. The module handles signal modulation, demodulation, and network protocol management, allowing the APlex device to transmit and receive data over mobile networks.

Use Cases and Applications:
- Industrial Automation: Enables remote monitoring and control of industrial equipment via mobile networks.
- Transportation and Fleet Management: Provides mobile connectivity for vehicle-mounted APlex systems, supporting GPS tracking and telematics.
- IoT Gateways: Enhances APlex IoT controllers with cellular backhaul capability for data transmission to cloud platforms.
- Smart Infrastructure: Supports mobile communication for smart city devices, environmental monitoring, and energy management systems.
- Field Service and Maintenance: Allows technicians to access real-time data and diagnostics from remote sites.

Compatibility:
- Compatible with APlex devices supporting modular communication upgrades.
- Works with APlex firmware versions supporting mobile communication modules.
- Supports integration with APlex software utilities for network configuration and diagnostics.

---

5. Components & Accessories
Included Items:
- APC-upgr-C-mobile-1G5Hz module
- Mounting screws and standoffs (for internal installation)
- Antenna cable (u.FL to SMA adapter)
- Quick installation guide
- Firmware and driver package (digital download or USB media)

Optional Add-ons:
- External high-gain antenna kit (for extended range applications)
- SIM card slot adapter (for devices without integrated SIM interface)
- APlex communication expansion board (for multi-network configurations)
- Protective enclosure or EMI shield (for high-interference environments)

Connectors:
- 1 × APC proprietary interface connector or mini PCIe edge connector
- 1 × Antenna connector (SMA/u.FL)
- 1 × Power interface (integrated through host system)

---

6. Installation & Setup
Requirements:
- Compatible APlex device with available communication upgrade slot
- System firmware supporting mobile communication modules
- Power supply meeting module voltage and current requirements
- Access to mobile network SIM card (if applicable)

Mounting Options:
- Internal installation via dedicated communication slot
- Secured with provided screws and standoffs
- External antenna connection via SMA or u.FL port

Configuration Steps:
1. Power off the APlex device and disconnect from power source.
2. Open the device enclosure and locate the communication upgrade slot.
3. Insert the APC-upgr-C-mobile-1G5Hz module into the designated connector.
4. Secure the module using the provided mounting hardware.
5. Connect the antenna cable to the module’s antenna port.
6. Reassemble the device enclosure and power on the system.
7. Install the provided firmware and drivers.
8. Configure network parameters (APN, authentication, frequency band) via APlex configuration utility.
9. Verify connectivity and signal strength using diagnostic tools.

Setup Time: Approximately 15–30 minutes depending on device model and configuration.

---

7. Performance & Capabilities
- Communication Speed: Up to 150 Mbps downlink and 50 Mbps uplink (network-dependent).
- Latency: < 50 ms typical under LTE conditions.
- Signal Sensitivity: −100 dBm typical.
- Network Support: GSM, UMTS, LTE (1.5 GHz band).
- Roaming Capability: Supports multi-network roaming with compatible SIM cards.
- Reliability: Designed for continuous operation in industrial environments.
- Efficiency: Low power draw ensures minimal impact on system thermal profile.
- Limitations:
- Requires compatible APlex hardware and firmware.
- Performance depends on network coverage and signal quality.
- Not intended for consumer-grade mobile devices.

Operational Advantages:
- Enables mobile data connectivity in remote or mobile environments.
- Reduces dependency on wired Ethernet or Wi-Fi infrastructure.
- Provides redundancy for mission-critical communication systems.
- Enhances system flexibility for mobile and distributed applications.

---

8. Standards & Compliance
The APC-upgr-C-mobile-1G5Hz complies with international and regional standards for electronic communication modules and industrial computing components.

Certifications:
- CE (Conformité Européenne): Ensures compliance with EU safety, health, and environmental protection standards.
- FCC (Federal Communications Commission): Certified for electromagnetic compatibility and radio frequency emissions.
- RoHS (Restriction of Hazardous Substances): Compliant with EU Directive 2011/65/EU, ensuring environmentally safe materials.
- REACH: Conforms to EU chemical safety regulations.
- ISO 9001 Manufacturing Compliance: Produced under certified quality management systems.

Industry Standards:
- 3GPP standards for GSM/UMTS/LTE communication.
- IEEE 802.3 (Ethernet interoperability, where applicable).
- IEC 60068 (environmental testing standards for vibration and temperature).
- EN 55032/55024 (EMC compliance for industrial equipment).

---

9. Additional Information
Warranty:
- Standard 2-year limited hardware warranty from APlex Technology Inc.
- Covers defects in materials and workmanship under normal operating conditions.
- Extended warranty options available (up to 5 years).

Support:
- Technical support via APlex online portal, email, and phone.
- Firmware updates and driver downloads available through APlex support website.
- Access to installation manuals, configuration guides, and troubleshooting documentation.

Maintenance:
- Periodic firmware updates recommended to maintain compatibility with evolving mobile network standards.
- Regular inspection of antenna connections and signal integrity advised.
- Cleaning with anti-static tools only; avoid exposure to moisture or conductive debris.

Software Updates:
- Firmware v1.5 or later supports enhanced network stability and improved power management.
- APlex configuration utility provides automatic update notifications.

Lifecycle and Availability:
- Designed for long-term availability consistent with APlex industrial product lifecycle policy (typically 5–7 years).
- Backward-compatible with previous APlex communication upgrade interfaces.

Environmental Considerations:
- RoHS-compliant materials ensure minimal environmental impact.
- Packaging made from recyclable materials.
- Designed for low power consumption to reduce operational carbon footprint.

---

Summary
The APC-upgr-C-mobile-1G5Hz is a robust, industrial-grade mobile communication upgrade module engineered for APlex devices. Operating at 1.5 GHz, it delivers reliable, high-speed cellular connectivity for industrial automation, IoT, and mobile computing applications. With its modular design, broad compatibility, and compliance with international standards, it provides a cost-effective path to enhance existing APlex systems with advanced mobile communication capabilities.

This upgrade solution exemplifies APlex’s commitment to modular scalability, long-term reliability, and industrial performance—ensuring that users can extend the functionality and lifespan of their APlex devices while maintaining optimal connectivity in demanding operational environments.