DIN-100S-01
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- High‑density I/O: 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot.
- Rear I/O configuration: Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability.
- High isolation protection: 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops.
- Wide input voltage range: Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices.
- High output drive capability: Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC.
- Common ground or common power configuration: Supports both configurations depending on system requirements.
- Rugged industrial design: 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards.
- High reliability: Optical isolation for all channels, protecting against noise and transient surges.
- Interrupt support: Two external interrupt sources (channels 0 and 1) for event‑driven applications.
- Software compatibility: Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET.
- Diagnostic LEDs: Four user‑programmable LEDs for status indication and debugging.
- Comprehensive software tools: Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.
- Rear I/O configuration: Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability.
- High isolation protection: 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops.
- Wide input voltage range: Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices.
- High output drive capability: Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC.
- Common ground or common power configuration: Supports both configurations depending on system requirements.
- Rugged industrial design: 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards.
- High reliability: Optical isolation for all channels, protecting against noise and transient surges.
- Interrupt support: Two external interrupt sources (channels 0 and 1) for event‑driven applications.
- Software compatibility: Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET.
- Diagnostic LEDs: Four user‑programmable LEDs for status indication and debugging.
- Comprehensive software tools: Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.
Comprehensive Product Summary: ADLINK cPCI‑7432R Isolated 32/32 Digital I/O Rear I/O Card
### 1. Product Overview
Product Name: cPCI‑7432R
Model: cPCI‑7432R
Series: 743X Series (NuDAQ/NuIPC 743X Isolated Digital I/O Family)
Article Number: cPCI‑7432R
Manufacturer: ADLINK Technology Inc.
Product Type: CompactPCI 3U isolated digital input/output card with rear I/O interface
Website: [www.adlinktech.com](http://www.adlinktech.com)
The ADLINK cPCI‑7432R is a 3U CompactPCI (cPCI) isolated digital I/O card designed for industrial and laboratory automation systems requiring high‑density, high‑isolation digital signal interfacing. It provides 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels accessible through a rugged rear I/O interface. The card is part of ADLINK’s 743X series, which includes PCI, PCIe, and CompactPCI variants for flexible system integration.
### 2. Key Features
- High‑density I/O: 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot.
- Rear I/O configuration: Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability.
- High isolation protection: 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops.
- Wide input voltage range: Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices.
- High output drive capability: Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC.
- Common ground or common power configuration: Supports both configurations depending on system requirements.
- Rugged industrial design: 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards.
- High reliability: Optical isolation for all channels, protecting against noise and transient surges.
- Interrupt support: Two external interrupt sources (channels 0 and 1) for event‑driven applications.
- Software compatibility: Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET.
- Diagnostic LEDs: Four user‑programmable LEDs for status indication and debugging.
- Comprehensive software tools: Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.
### 3. Technical Specifications
Form Factor: 3U CompactPCI, rear I/O version (PICMG 2.0 R2.1 compliant)
Board Dimensions: 160 mm × 100 mm (6.24 in × 3.9 in)
Connector Type: 100‑pin SCSI‑II female (rear I/O interface via J2 backplane connector)
Operating Temperature: 0 °C to 60 °C (32 °F to 140 °F)
Storage Temperature: −20 °C to 80 °C (−4 °F to 176 °F)
Relative Humidity: 5 % to 95 %, non‑condensing
Power Requirements:
- +5 V @ 530 mA typical
- +3.3 V @ 36.6 mA typical
- +12 V @ 150 mA typical
Isolation Voltage: 5000 V RMS channel‑to‑system isolation
Weight: Approx. 200 g (typical for 3U cPCI card)
Material: Multi‑layer PCB with industrial‑grade components and conformal coating (optional)
### 4. Functionality
The cPCI‑7432R provides optically isolated digital input and output channels for interfacing field devices such as sensors, switches, relays, and actuators. Each input channel is isolated from the system ground, preventing ground loops and protecting the host system from voltage spikes. The outputs use open‑collector Darlington transistors capable of driving high‑current loads such as relays or indicator lamps.
Typical Use Cases:
- Industrial automation and process control
- Machine monitoring and control systems
- Laboratory data acquisition and test benches
- Event counting, frequency measurement, and pulse generation
- Safety interlock and alarm systems
- PLC and SCADA system integration
Compatibility:
- CompactPCI backplanes compliant with PICMG 2.0 R2.1
- ADLINK transition boards (e.g., DB‑100RU) for rear I/O access
- Supported operating systems: Windows 7/8.1 x86/x64, Linux
- Supported development environments: LabVIEW®, MATLAB®, Visual Studio®, C/C++, Visual Basic, and ADLINK PCIS‑DASK API
### 5. Components & Accessories
Included Items:
- cPCI‑7432R board
- ADLINK software CD (drivers, SDKs, utilities)
- User’s manual and software installation guide
- Rear I/O transition board (DB‑100RU) for rear I/O connectivity
Optional Accessories:
- DIN‑100S‑01: Terminal board with one 100‑pin SCSI‑II connector and DIN‑rail mounting (cables not included).
- ACL‑102100‑1: 100‑pin SCSI‑II cable (1 m, mating with AMP‑787082‑9).
- Legacy replacement: DIN‑502S can be replaced by two DIN‑50S‑01 boards and one ACL‑10252‑1 (100‑pin to dual 50‑pin cable, 1 m).
Connectors:
- Rear I/O via CompactPCI J2 connector (100‑pin SCSI‑II mapping).
- Signal groups:
- 32 DI channels (IDI_0 – IDI_31)
- 32 DO channels (IDO_0 – IDO_31)
- COM1–COM4 (input commons)
- VDD1–VDD4 (output commons)
- IGND (isolated ground returns)
- V5V (on‑board unregulated 5 V output)
### 6. Installation & Setup
System Requirements:
- CompactPCI chassis with available 3U I/O slot
- PICMG 2.0 R2.1 compliant backplane supporting rear I/O
- +5 V DC power supply
Installation Procedure:
1. Power off the CompactPCI system and all peripherals.
2. Observe ESD precautions—use a grounded wrist strap and anti‑static mat.
3. Insert the cPCI‑7432R into an available 3U CompactPCI slot.
4. Secure the card using the front‑panel screws.
5. Connect the rear I/O transition board (DB‑100RU) to the backplane if required.
6. Power on the system; the BIOS automatically assigns resources (Plug‑and‑Play).
7. Install ADLINK drivers from the provided CD or website.
8. Verify installation using the AD‑Logger utility or sample programs.
Configuration:
- No manual address or interrupt configuration required (PnP compliant).
- Two interrupt sources (channels 0 and 1) can be enabled via software.
- LED control and slot number retrieval available through API functions.
Caution:
Do not insert the cPCI‑7432R into non‑ADLINK backplanes with incompatible rear I/O pinouts; permanent damage may occur.
### 7. Performance & Capabilities
Digital Input:
- Channels: 32 isolated inputs
- Input voltage range: 0 – 24 V DC (non‑polarity)
- Logic high: 5 – 24 V DC
- Logic low: 0 – 1.5 V DC
- Input resistance: 2.4 kΩ @ 0.5 W
- Isolation voltage: 5000 V RMS
- Throughput: 10 kHz (0.1 ms response)
- Interrupt sources: Channels 0 and 1
- Data transfer: Programmed I/O
Digital Output:
- Channels: 32 isolated outputs
- Output type: Open‑collector Darlington transistor
- Sink current: 500 mA per channel (max), 120 mA per channel (all ON @ 24 V)
- Supply voltage: 5 – 35 V DC
- Power dissipation: Max 2.25 W per 8‑channel chip
- Isolation voltage: 5000 V RMS
- Throughput: 10 kHz (0.1 ms switching)
Performance Highlights:
- High‑speed response suitable for real‑time control.
- Robust isolation ensures reliable operation in noisy industrial environments.
- Supports both current‑sink and current‑source configurations.
- On‑board isolated +5 V output (200 mA max) for external sensor power.
Limitations:
- Not intended for analog signal processing.
- Requires external power supply for inductive loads (relays, motors).
- Rear I/O pinout must match ADLINK backplane specification.
### 8. Standards & Compliance
- CompactPCI Compliance: PICMG 2.0 R2.1 (3U Eurocard form factor)
- Bus Interface: 32‑bit 5 V PCI signaling via CompactPCI backplane
- Isolation: Optical isolation up to 5000 V RMS
- Safety & EMC: Designed for industrial environments; conforms to CE and FCC Class A (when installed in compliant systems)
- Environmental: Operating 0 – 60 °C, 5 – 95 % RH non‑condensing
- RoHS Compliance: Yes (lead‑free manufacturing)
### 9. Additional Information
Software Support:
- Drivers: PCIS‑DASK for Windows 98/NT/2000/XP/7/8.1 and Linux
- Utilities: AD‑Logger for data monitoring and diagnostics
- Programming Libraries:
- DOS C/C++ library
- Windows DLL for VB, VC++, Delphi, BC5
- LabVIEW® VIs (PCIS‑LVIEW)
- HP VEE objects (PCIS‑VEE)
- ActiveX controls (DAQBench™)
- DDE Server (PCIS‑DDE)
- ISaGRAF™ SoftPLC driver (PCIS‑ISG)
- InControl™ driver (PCIS‑ICL)
- OPC Server (PCIS‑OPC)
Maintenance & Support:
- Warranty: 2‑year limited warranty from shipment date.
- Exclusions: Damage due to misuse, improper installation, environmental factors, or unauthorized repair.
- Service Procedure: Obtain RMA form from [www.adlinktech.com](http://www.adlinktech.com) before returning products.
- Technical Support Contacts:
- General Service: service@adlinktech.com
- Automation Products: automation@adlinktech.com
- NuDAQ/NuIPC: nudaq@adlinktech.com / nuipc@adlinktech.com
- Phone: +886‑2‑82265877 Fax: +886‑2‑82265717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan
Maintenance Recommendations:
- Operate within specified temperature and humidity ranges.
- Avoid exposure to corrosive or conductive contaminants.
- Periodically inspect connectors and backplane contacts for cleanliness.
- Use anti‑static precautions during handling.
Firmware & Updates:
- Firmware updates and driver revisions available via ADLINK’s website.
- Backward compatibility maintained across 743X series revisions.
### Summary
The ADLINK cPCI‑7432R is a robust, high‑isolation, high‑density digital I/O solution tailored for CompactPCI systems requiring rear I/O connectivity. With 32 isolated digital inputs and 32 isolated digital outputs, 5000 V RMS isolation, and 500 mA sink capability per channel, it delivers reliable performance in demanding industrial automation and data acquisition environments. Its compliance with PICMG 2.0 R2.1, comprehensive software support, and flexible programming interfaces make it an ideal choice for system integrators and OEMs seeking a dependable, long‑life digital I/O interface for CompactPCI platforms.
### 1. Product Overview
Product Name: cPCI‑7432R
Model: cPCI‑7432R
Series: 743X Series (NuDAQ/NuIPC 743X Isolated Digital I/O Family)
Article Number: cPCI‑7432R
Manufacturer: ADLINK Technology Inc.
Product Type: CompactPCI 3U isolated digital input/output card with rear I/O interface
Website: [www.adlinktech.com](http://www.adlinktech.com)
The ADLINK cPCI‑7432R is a 3U CompactPCI (cPCI) isolated digital I/O card designed for industrial and laboratory automation systems requiring high‑density, high‑isolation digital signal interfacing. It provides 32 isolated digital input (DI) channels and 32 isolated digital output (DO) channels accessible through a rugged rear I/O interface. The card is part of ADLINK’s 743X series, which includes PCI, PCIe, and CompactPCI variants for flexible system integration.
### 2. Key Features
- High‑density I/O: 32 isolated digital inputs and 32 isolated digital outputs, providing a total of 64 channels in a single 3U CompactPCI slot.
- Rear I/O configuration: Designed for rear I/O connectivity through the CompactPCI backplane, enabling clean front‑panel cable management and improved system reliability.
- High isolation protection: 5000 V RMS channel‑to‑system isolation, protecting host computers from high‑voltage transients and ground loops.
- Wide input voltage range: Accepts 0–24 V DC input signals (non‑polarity), suitable for industrial sensors and logic devices.
- High output drive capability: Open‑collector Darlington transistor outputs capable of sinking up to 500 mA per channel at 24 V DC.
- Common ground or common power configuration: Supports both configurations depending on system requirements.
- Rugged industrial design: 3U Eurocard form factor compliant with PICMG 2.0 R2.1 CompactPCI standards.
- High reliability: Optical isolation for all channels, protecting against noise and transient surges.
- Interrupt support: Two external interrupt sources (channels 0 and 1) for event‑driven applications.
- Software compatibility: Drivers and SDKs for Windows 7/8.1 x86/x64 and Linux; supports LabVIEW®, MATLAB®, C/C++, Visual Basic, and Visual Studio .NET.
- Diagnostic LEDs: Four user‑programmable LEDs for status indication and debugging.
- Comprehensive software tools: Includes AD‑Logger utility and PCIS‑DASK driver library for rapid development.
### 3. Technical Specifications
Form Factor: 3U CompactPCI, rear I/O version (PICMG 2.0 R2.1 compliant)
Board Dimensions: 160 mm × 100 mm (6.24 in × 3.9 in)
Connector Type: 100‑pin SCSI‑II female (rear I/O interface via J2 backplane connector)
Operating Temperature: 0 °C to 60 °C (32 °F to 140 °F)
Storage Temperature: −20 °C to 80 °C (−4 °F to 176 °F)
Relative Humidity: 5 % to 95 %, non‑condensing
Power Requirements:
- +5 V @ 530 mA typical
- +3.3 V @ 36.6 mA typical
- +12 V @ 150 mA typical
Isolation Voltage: 5000 V RMS channel‑to‑system isolation
Weight: Approx. 200 g (typical for 3U cPCI card)
Material: Multi‑layer PCB with industrial‑grade components and conformal coating (optional)
### 4. Functionality
The cPCI‑7432R provides optically isolated digital input and output channels for interfacing field devices such as sensors, switches, relays, and actuators. Each input channel is isolated from the system ground, preventing ground loops and protecting the host system from voltage spikes. The outputs use open‑collector Darlington transistors capable of driving high‑current loads such as relays or indicator lamps.
Typical Use Cases:
- Industrial automation and process control
- Machine monitoring and control systems
- Laboratory data acquisition and test benches
- Event counting, frequency measurement, and pulse generation
- Safety interlock and alarm systems
- PLC and SCADA system integration
Compatibility:
- CompactPCI backplanes compliant with PICMG 2.0 R2.1
- ADLINK transition boards (e.g., DB‑100RU) for rear I/O access
- Supported operating systems: Windows 7/8.1 x86/x64, Linux
- Supported development environments: LabVIEW®, MATLAB®, Visual Studio®, C/C++, Visual Basic, and ADLINK PCIS‑DASK API
### 5. Components & Accessories
Included Items:
- cPCI‑7432R board
- ADLINK software CD (drivers, SDKs, utilities)
- User’s manual and software installation guide
- Rear I/O transition board (DB‑100RU) for rear I/O connectivity
Optional Accessories:
- DIN‑100S‑01: Terminal board with one 100‑pin SCSI‑II connector and DIN‑rail mounting (cables not included).
- ACL‑102100‑1: 100‑pin SCSI‑II cable (1 m, mating with AMP‑787082‑9).
- Legacy replacement: DIN‑502S can be replaced by two DIN‑50S‑01 boards and one ACL‑10252‑1 (100‑pin to dual 50‑pin cable, 1 m).
Connectors:
- Rear I/O via CompactPCI J2 connector (100‑pin SCSI‑II mapping).
- Signal groups:
- 32 DI channels (IDI_0 – IDI_31)
- 32 DO channels (IDO_0 – IDO_31)
- COM1–COM4 (input commons)
- VDD1–VDD4 (output commons)
- IGND (isolated ground returns)
- V5V (on‑board unregulated 5 V output)
### 6. Installation & Setup
System Requirements:
- CompactPCI chassis with available 3U I/O slot
- PICMG 2.0 R2.1 compliant backplane supporting rear I/O
- +5 V DC power supply
Installation Procedure:
1. Power off the CompactPCI system and all peripherals.
2. Observe ESD precautions—use a grounded wrist strap and anti‑static mat.
3. Insert the cPCI‑7432R into an available 3U CompactPCI slot.
4. Secure the card using the front‑panel screws.
5. Connect the rear I/O transition board (DB‑100RU) to the backplane if required.
6. Power on the system; the BIOS automatically assigns resources (Plug‑and‑Play).
7. Install ADLINK drivers from the provided CD or website.
8. Verify installation using the AD‑Logger utility or sample programs.
Configuration:
- No manual address or interrupt configuration required (PnP compliant).
- Two interrupt sources (channels 0 and 1) can be enabled via software.
- LED control and slot number retrieval available through API functions.
Caution:
Do not insert the cPCI‑7432R into non‑ADLINK backplanes with incompatible rear I/O pinouts; permanent damage may occur.
### 7. Performance & Capabilities
Digital Input:
- Channels: 32 isolated inputs
- Input voltage range: 0 – 24 V DC (non‑polarity)
- Logic high: 5 – 24 V DC
- Logic low: 0 – 1.5 V DC
- Input resistance: 2.4 kΩ @ 0.5 W
- Isolation voltage: 5000 V RMS
- Throughput: 10 kHz (0.1 ms response)
- Interrupt sources: Channels 0 and 1
- Data transfer: Programmed I/O
Digital Output:
- Channels: 32 isolated outputs
- Output type: Open‑collector Darlington transistor
- Sink current: 500 mA per channel (max), 120 mA per channel (all ON @ 24 V)
- Supply voltage: 5 – 35 V DC
- Power dissipation: Max 2.25 W per 8‑channel chip
- Isolation voltage: 5000 V RMS
- Throughput: 10 kHz (0.1 ms switching)
Performance Highlights:
- High‑speed response suitable for real‑time control.
- Robust isolation ensures reliable operation in noisy industrial environments.
- Supports both current‑sink and current‑source configurations.
- On‑board isolated +5 V output (200 mA max) for external sensor power.
Limitations:
- Not intended for analog signal processing.
- Requires external power supply for inductive loads (relays, motors).
- Rear I/O pinout must match ADLINK backplane specification.
### 8. Standards & Compliance
- CompactPCI Compliance: PICMG 2.0 R2.1 (3U Eurocard form factor)
- Bus Interface: 32‑bit 5 V PCI signaling via CompactPCI backplane
- Isolation: Optical isolation up to 5000 V RMS
- Safety & EMC: Designed for industrial environments; conforms to CE and FCC Class A (when installed in compliant systems)
- Environmental: Operating 0 – 60 °C, 5 – 95 % RH non‑condensing
- RoHS Compliance: Yes (lead‑free manufacturing)
### 9. Additional Information
Software Support:
- Drivers: PCIS‑DASK for Windows 98/NT/2000/XP/7/8.1 and Linux
- Utilities: AD‑Logger for data monitoring and diagnostics
- Programming Libraries:
- DOS C/C++ library
- Windows DLL for VB, VC++, Delphi, BC5
- LabVIEW® VIs (PCIS‑LVIEW)
- HP VEE objects (PCIS‑VEE)
- ActiveX controls (DAQBench™)
- DDE Server (PCIS‑DDE)
- ISaGRAF™ SoftPLC driver (PCIS‑ISG)
- InControl™ driver (PCIS‑ICL)
- OPC Server (PCIS‑OPC)
Maintenance & Support:
- Warranty: 2‑year limited warranty from shipment date.
- Exclusions: Damage due to misuse, improper installation, environmental factors, or unauthorized repair.
- Service Procedure: Obtain RMA form from [www.adlinktech.com](http://www.adlinktech.com) before returning products.
- Technical Support Contacts:
- General Service: service@adlinktech.com
- Automation Products: automation@adlinktech.com
- NuDAQ/NuIPC: nudaq@adlinktech.com / nuipc@adlinktech.com
- Phone: +886‑2‑82265877 Fax: +886‑2‑82265717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan
Maintenance Recommendations:
- Operate within specified temperature and humidity ranges.
- Avoid exposure to corrosive or conductive contaminants.
- Periodically inspect connectors and backplane contacts for cleanliness.
- Use anti‑static precautions during handling.
Firmware & Updates:
- Firmware updates and driver revisions available via ADLINK’s website.
- Backward compatibility maintained across 743X series revisions.
### Summary
The ADLINK cPCI‑7432R is a robust, high‑isolation, high‑density digital I/O solution tailored for CompactPCI systems requiring rear I/O connectivity. With 32 isolated digital inputs and 32 isolated digital outputs, 5000 V RMS isolation, and 500 mA sink capability per channel, it delivers reliable performance in demanding industrial automation and data acquisition environments. Its compliance with PICMG 2.0 R2.1, comprehensive software support, and flexible programming interfaces make it an ideal choice for system integrators and OEMs seeking a dependable, long‑life digital I/O interface for CompactPCI platforms.
-
Digital_IO_Selection_Guide_20151230.pdf
PDF Catalog
-
PCI_PCIe_cPCI-7432_7433_7434_Datasheet_en.pdf
PDF Catalog
- DIN-100S-01 - 100pin SCSI-II termination board DIN rail w/o cable
- DIN-502S - 2*50pin SCSI-II termination board DIN rail
