Comprehensive Product Summary – ADLINK cPCI‑8210 CompactPCI Fast Ethernet and Ultra‑Wide SCSI Interface Card

---

### 1. Product Overview

Product Name: cPCI‑8210
Model: cPCI‑8210
Series: NuIPC® cPCI‑8210/8211/8212 Series
Article Number: cPCI‑8210
Manufacturer: ADLINK Technology Inc.
Product Type: 3U CompactPCI Fast Ethernet and Ultra‑Wide SCSI Interface Controller Card
Manual Revision: Rev. 2.00 (April 27, 2000)
Manufacturer Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
Website: [www.adlink.com.tw](http://www.adlink.com.tw)
Support Contacts: service@adlink.com.tw, nuipc@adlink.com.tw

The ADLINK cPCI‑8210 is a high‑performance CompactPCI (cPCI) peripheral module that integrates both Fast Ethernet and Wide Ultra‑2 SCSI interfaces. Designed for industrial and embedded computing environments, it provides dual‑function network and storage connectivity in a single 3U CompactPCI form factor. The card is part of ADLINK’s NuIPC® family, which includes the cPCI‑8210, cPCI‑8211, and cPCI‑8212 variants, each optimized for specific interface configurations.

---

### 2. Key Features

- Dual‑Function Interface: Combines 10Base‑T/100Base‑TX Fast Ethernet and Wide Ultra‑2 SCSI interfaces on a single CompactPCI card.
- High‑Performance Ethernet: Utilizes the Intel® 82558 Ethernet controller supporting 10/100 Mbps operation with full‑duplex capability and auto‑negotiation (Nway).
- Advanced SCSI Controller: Employs the Symbios® SYM53C895 PCI Wide Ultra‑2 SCSI controller supporting up to 80 MB/s transfer rates.
- Low Voltage Differential (LVD) Technology: Enables extended SCSI cable lengths up to 12 meters while maintaining high‑speed data integrity.
- Backward Compatibility: Fully compatible with SCSI‑1, SCSI‑2, Ultra SCSI, and Ultra‑Wide SCSI standards.
- Auto‑Switching Transmission Modes: Automatically detects and adjusts between Single‑Ended (SE), Low Voltage Differential (LVD), and High Voltage Differential (HVD) modes.
- CompactPCI Compliance: Fully compliant with PICMG 2.0 CompactPCI Rev. 2.0 specifications.
- Operating System Support: Drivers available for DOS, Windows 95/98, Windows NT, OS/2, SCO UNIX, and Linux.
- Robust Industrial Design: 3U form factor with front‑panel RJ‑45 and 68‑pin SCSI connectors, LED indicators, and jumper/switch configuration options.
- Regulatory Compliance: Meets CE and FCC Class B standards for EMI/EMS performance.

---

### 3. Technical Specifications

Form Factor: 3U CompactPCI (PICMG 2.0 Rev. 2.0 compliant)
Dimensions: 160 mm (Depth) × 100 mm (Width)
Weight: Approximately 200–250 g (typical for 3U cPCI module)
Power Requirements:
- cPCI‑8210: +5 V @ 2 A (max)
- cPCI‑8211/8211R: +5 V @ 100 mA (max)
- cPCI‑8212/8212R: +5 V @ 1 A (max)

Environmental Conditions:
- Operating Temperature: 0°C to +60°C
- Storage Temperature: –20°C to +80°C
- Relative Humidity: 10%–90% non‑condensing

Ethernet Interface:
- Controller: Intel 82558 (PCI V2.1 compliant)
- Standards: IEEE 802.3 (10Base‑T), IEEE 802.3u (100Base‑TX)
- Data Rate: 10 Mbps / 100 Mbps (auto‑negotiation)
- Duplex Mode: Full and half duplex
- Connector: RJ‑45 (external)
- Indicators: 10/100 Mbps, Link, Activity LEDs
- Boot Support: Intel Preboot Execution Environment (PXE)

SCSI Interface:
- Controller: Symbios SYM53C895 PCI Wide Ultra‑2 SCSI
- Protocol: Wide Ultra‑2 SCSI (up to 80 MB/s)
- Clock: On‑chip quadrupler (160 MHz internal frequency with 40 MHz external oscillator)
- Cable Length: Up to 12 m (LVD mode)
- Connectors:
- External 68‑pin shielded connector (Wide Ultra‑2 SCSI)
- Internal 50‑pin connector (Ultra SCSI)
- Compatibility: SCSI‑1, SCSI‑2, Ultra SCSI, Ultra‑Wide SCSI, Wide Ultra‑2 SCSI
- Voltage Modes: SE (–0.35 to +0.5 V), LVD (0.7 to 1.9 V), HVD (2.4 to 5.5 V)

---

### 4. Functionality

The cPCI‑8210 serves as a dual‑interface controller card for CompactPCI systems, providing both network and storage connectivity.

Ethernet Functionality:
The Intel 82558 controller integrates both MAC and PHY layers, supporting 10/100 Mbps Ethernet with automatic speed and duplex detection. It features 3 KB transmit and 3 KB receive FIFOs for efficient data buffering and supports scatter‑gather DMA for high‑throughput PCI bus mastering. The card’s RJ‑45 port connects directly to standard Ethernet hubs or switches using Category 5 UTP cabling up to 100 meters.

SCSI Functionality:
The Symbios SYM53C895 controller supports Wide Ultra‑2 SCSI with LVD signaling, enabling high‑speed data transfers up to 80 MB/s. It automatically detects the signaling mode (SE, LVD, or HVD) based on connected devices and adjusts operation accordingly. The LVD mode allows longer cable runs (up to 12 m) and improved noise immunity. The controller is backward compatible with earlier SCSI standards, ensuring interoperability with legacy devices.

Use Cases and Applications:
- Industrial automation and control systems requiring high‑speed data acquisition and storage.
- Embedded computing platforms needing combined network and SCSI connectivity.
- CompactPCI‑based servers and communication systems.
- Test and measurement systems integrating networked data logging and SCSI storage.

Compatibility:
Compatible with CompactPCI backplanes conforming to PICMG 2.0 Rev. 2.0. Supported operating systems include DOS, Windows 95/98/NT, OS/2, SCO UNIX, and Linux.

---

### 5. Components & Accessories

Package Contents:
- 1 × cPCI‑8210 3U CompactPCI board
- 1 × ADLINK CD‑ROM (Manual & Software Utility)
- 1 × User’s Manual

Optional Accessories:
- R8211 daughter board (for cPCI‑8211R models)
- R8212 daughter board (for cPCI‑8212R models)
- Flash Boot ROM (optional, +5 V or +12 V types)
- SCSI cables (68‑pin shielded external, 50‑pin internal)
- Category 5 UTP Ethernet cable

Connectors:
- CN1: 68‑pin Wide Ultra‑2 SCSI connector
- CN2: RJ‑45 Ethernet connector
- Internal 50‑pin Ultra SCSI connector (for internal devices)

LED Indicators:
- ACT (LAN Active)
- LINK (LAN Link Status)
- 100M (10/100 Mbps Speed)
- ACT (SCSI Activity)
- LVD/SE/HVD (SCSI Mode Indicators)

---

### 6. Installation & Setup

System Requirements:
- CompactPCI chassis with available 3U peripheral slot
- +5 V power supply (per specifications)
- Supported operating system with appropriate drivers

Installation Steps:
1. Power off the CompactPCI system and insert the cPCI‑8210 into an available 3U slot.
2. Connect the RJ‑45 Ethernet cable to the front‑panel connector.
3. Connect SCSI devices using the 68‑pin external or 50‑pin internal connector as required.
4. Power on the system and install drivers from the ADLINK CD‑ROM.

Driver Installation (Windows 98/NT):
- For Ethernet: Use Intel 82558/82559 driver files located under `X:\NUIPC\8210\LAN`.
- For SCSI: Use Symbios 53C895 driver files under `X:\NUIPC\8210\SCSI\WIN95` or `WINNT\MINPORT`.

Jumper and Switch Settings:
- Flash ROM Voltage Selection:
- +12 V ROM: Switch1 ON (SCSI), Switch2 ON (LAN)
- +5 V ROM: All switches OFF
- Boot ROM Enable (JP1):
- Pins 1–2: Boot ROM Disabled (default)
- Pins 2–3: Boot ROM Enabled
- Termination (cPCI‑8212R):
- JP1 Enabled: Termination active (default)
- JP1 Disabled: Termination off (for front and rear device connections)

Cabling Guidelines:
- Ethernet: Category 5 UTP, maximum 100 m between node and hub.
- SCSI: LVD cabling up to 12 m; ensure proper termination at both ends.

---

### 7. Performance & Capabilities

Ethernet Performance:
- Data Rate: 10 Mbps (10Base‑T) / 100 Mbps (100Base‑TX)
- Duplex: Full and half duplex supported
- Auto‑Negotiation: Nway protocol for automatic speed and duplex detection
- Bus Interface: 32‑bit PCI bus mastering with scatter‑gather DMA
- Buffering: 3 KB transmit and 3 KB receive FIFOs
- Boot Capability: PXE remote boot supported (82559 variant)

SCSI Performance:
- Maximum Transfer Rate: 80 MB/s (Wide Ultra‑2 SCSI)
- Cable Length: Up to 12 m (LVD mode)
- Clock Frequency: 160 MHz internal (40 MHz external oscillator)
- Device Compatibility: Up to 16 devices per SCSI bus (typical)
- Backward Compatibility: Supports Ultra, Fast, and legacy SCSI devices

Efficiency and Reliability:
- LVD signaling reduces noise and allows longer cable runs.
- Automatic fallback ensures compatibility with mixed SCSI environments.
- PCI bus mastering minimizes CPU overhead for data transfers.

Limitations:
- Requires proper termination for stable SCSI operation.
- Cable length and speed depend on signaling mode (SE, LVD, HVD).
- PXE boot available only on Intel 82559‑based variants.

---

### 8. Standards & Compliance

CompactPCI Compliance:
- PICMG 2.0 Rev. 2.0 (3U form factor)

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX)

SCSI Standards:
- ANSI SCSI‑1, SCSI‑2, Ultra SCSI, Ultra‑Wide SCSI, Wide Ultra‑2 SCSI

Regulatory Compliance:
- CE Certification:
- EMI: EN 55022 Class B
- Harmonics: EN 61000‑3‑2
- Voltage Fluctuations: EN 61000‑3‑3
- EMS: EN 50082‑1:1997
- FCC Certification:
- ANSI C63.4‑1992
- CISPR PUB. 22
- FCC Part 15 (Class B)

Environmental Compliance:
- Designed for industrial temperature and humidity ranges.

---

### 9. Additional Information

Warranty:
Standard ADLINK limited warranty (contact manufacturer for details).

Technical Support:
- Email: nuipc@adlink.com.tw
- Phone: +886‑2‑82265877
- Fax: +886‑2‑82265717

Maintenance:
- Periodic inspection of connectors and cables recommended.
- Ensure proper termination and grounding for SCSI bus stability.
- Firmware and driver updates available via ADLINK support channels.

Software & Driver Updates:
- Available on ADLINK’s official website and included CD‑ROM.
- Supports multiple operating systems with dedicated INF and MINIPORT drivers.

Service & RMA:
ADLINK emphasizes customer satisfaction and provides prompt service through its global support network. Users should provide detailed system and environment information when requesting assistance.

---

### Summary

The ADLINK cPCI‑8210 is a robust, dual‑function CompactPCI interface card that integrates Fast Ethernet (10/100 Mbps) and Wide Ultra‑2 SCSI (80 MB/s) capabilities in a single 3U module. Built around the Intel 82558 Ethernet and Symbios SYM53C895 SCSI controllers, it delivers high‑speed data communication and storage connectivity for industrial and embedded systems. With full compliance to PICMG 2.0, IEEE 802.3, and ANSI SCSI standards, the cPCI‑8210 ensures interoperability, reliability, and long‑term support in demanding applications. Its combination of auto‑negotiation Ethernet, LVD SCSI signaling, and broad OS driver support makes it an ideal solution for CompactPCI‑based networked computing environments requiring both high‑speed communication and mass‑storage interfacing.