cBP-3062A
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 CompactPCI power interface standard, ensuring interoperability with standard 3U/6U CompactPCI chassis and backplanes.
- Redundant Power Architecture: Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown.
- Input Voltage: 24 V DC nominal input, designed for industrial DC power environments.
- Output Power: 150 W total continuous output capacity, optimized for embedded and industrial computing platforms.
- Connector Interface: Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane.
- High Reliability: Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E).
- Hot‑Swappable Operation: Enables live insertion and removal in redundant configurations, minimizing downtime.
- Compact and Lightweight: 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg.
- Comprehensive Protection: Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal.
- Status Indicators: Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics.
- Compliance: Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).
- Redundant Power Architecture: Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown.
- Input Voltage: 24 V DC nominal input, designed for industrial DC power environments.
- Output Power: 150 W total continuous output capacity, optimized for embedded and industrial computing platforms.
- Connector Interface: Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane.
- High Reliability: Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E).
- Hot‑Swappable Operation: Enables live insertion and removal in redundant configurations, minimizing downtime.
- Compact and Lightweight: 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg.
- Comprehensive Protection: Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal.
- Status Indicators: Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics.
- Compliance: Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).
Comprehensive Product Summary: ADLINK cPWR‑1520A CompactPCI Power Supply
### 1. Product Overview
Product Name: cPWR‑1520A
Article Number: cPWR‑1520A
Series: cPCIS‑1000/2000 Series Components
Product Type: 3U CompactPCI Redundant Power Supply
Manufacturer: ADLINK Technology Inc.
Brand: NuIPC® (registered trademark of ADLINK Technology Inc.)
Product Description: CompactPCI 3U redundant power supply, 150 W output, 24 V DC input, standard 47‑pin connector for DC input and DC output.
Intended Platform: Designed for integration into ADLINK’s cPCIS‑1000 and cPCIS‑2000 3U CompactPCI sub‑systems and compatible backplanes (e.g., cBP‑3062).
### 2. Key Features
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 CompactPCI power interface standard, ensuring interoperability with standard 3U/6U CompactPCI chassis and backplanes.
- Redundant Power Architecture: Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown.
- Input Voltage: 24 V DC nominal input, designed for industrial DC power environments.
- Output Power: 150 W total continuous output capacity, optimized for embedded and industrial computing platforms.
- Connector Interface: Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane.
- High Reliability: Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E).
- Hot‑Swappable Operation: Enables live insertion and removal in redundant configurations, minimizing downtime.
- Compact and Lightweight: 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg.
- Comprehensive Protection: Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal.
- Status Indicators: Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics.
- Compliance: Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 18 V DC – 36 V DC (nominal 24 V DC)
- Input Current: ≤ 20 A at full load
- Inrush Current: < 40 A
- Efficiency: Typical 73 %
- Power Factor: Not applicable (DC input)
- Protection: Fuse, over‑voltage, under‑voltage, and surge protection
Electrical Output
- Rated Power: 150 W continuous
- Output Voltages: +5 V, +3.3 V, +12 V, −12 V
- Maximum Output Currents:
- +5 V @ 25 A
- +3.3 V @ 25 A
- +12 V @ 3 A
- −12 V @ 1 A
- Combined +5 V and +3.3 V ≤ 27 A
- Voltage Accuracy: ±3 % (+5 V), ±5 % (others)
- Ripple & Noise: ≤ 100 mV p‑p or 1 % of output (whichever greater)
- Load Regulation: ±1 % (+5 V), ±3 % (+3.3 V, ±12 V)
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms (all outputs within 10 ms of each other)
- Temperature Coefficient: 0.05 % / °C
- Minimum Load: 2 A @ +5 V
Mechanical Characteristics
- Form Factor: 3U CompactPCI plug‑in module
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: ≈ 0.85 kg
- Cooling: Forced‑air (15 CFM recommended)
Environmental Conditions
- Operating Temperature: 0 °C – 70 °C (full power to 40 °C with forced air)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Vibration: 5 – 55 Hz, 0.38 mm displacement, 30 min per axis (X/Y/Z)
- Shock: Non‑operating, 2 cycles per axis
Reliability
- MTBF: 100,000 hours (MIL‑HDBK‑217E)
- MTTR: 5 minutes (module replacement)
### 4. Functionality
The cPWR‑1520A operates as a modular DC‑input power supply for CompactPCI systems. It converts a 24 V DC input into regulated system voltages (+5 V, +3.3 V, ±12 V) required by CompactPCI backplanes and peripheral modules.
Operational Principles:
- The unit plugs directly into a 47‑pin CompactPCI power slot on a compliant backplane (e.g., cBP‑3062).
- It supports hot‑swap insertion/removal under load when used in redundant pairs.
- Internal current‑sharing circuitry allows multiple units to operate in parallel, balancing load within ±10 %.
- Control signals (EN#, INH#, DEG#, FAL#) manage enable/inhibit, derating, and fault reporting to the system controller.
- Sense lines (V1SENSE, V2SENSE) compensate for voltage drops across the backplane, ensuring precise regulation at the load.
Typical Applications:
- Industrial automation controllers
- Embedded computing platforms
- Telecommunications and networking CompactPCI systems
- Transportation and defense electronics requiring DC power input
- Redundant power configurations in mission‑critical systems
Compatibility:
- Fully compatible with ADLINK cBP‑3062 redundant backplane and cPCIS‑2000/1000 chassis.
- Supports integration with other PICMG 2.11‑compliant CompactPCI systems.
### 5. Components & Accessories
Included Components:
- cPWR‑1520A power supply module (47‑pin connector)
- Front panel with LED indicators (POWER OK, FAULT)
- Integrated cooling vents and handle for hot‑swap operation
Optional / Compatible Accessories:
- Backplanes:
- cBP‑3062 (dual 47‑pin redundant PSU backplane)
- cBP‑3200/3400 series (3U CompactPCI backplanes)
- Chassis:
- cPCIS‑2000A/B (3U CompactPCI chassis with 2 or 4 fans)
- cPCIS‑1000 (3U CompactPCI card cage)
- Mounting Frames:
- cPCI‑PSF (PS2‑size PSU frame)
- Cables & Connectors:
- Positronic PCIH47F300A1 mating connector
- Screw‑terminal AC/DC input adapters (for backplane connection)
### 6. Installation & Setup
Pre‑Installation Requirements:
- Ensure the backplane connector is Positronic PCIH47F300A1 or equivalent per PICMG 2.11.
- Verify system DC input (24 V DC) is within specified range (18–36 V DC).
- Confirm adequate forced‑air cooling (≥ 15 CFM).
Installation Steps:
1. Power off or isolate redundant channel before insertion.
2. Align the module with the CompactPCI power slot guide rails.
3. Insert firmly until the connector is fully seated.
4. Secure the front panel latch.
5. Apply DC input power; verify green “POWER” LED illuminates.
6. In redundant systems, confirm both units share load evenly (±10 %).
Hot‑Swap Procedure:
- The unit supports live insertion/removal when the system backplane and controller support PICMG 2.11 hot‑swap signaling.
- The INH# and EN# signals coordinate power sequencing to prevent bus disturbances.
Configuration:
- Sense lines (V1SENSE, V2SENSE) must be connected to the backplane’s power planes.
- Optional derating (DEG#) and fault (FAL#) signals can be monitored by the system controller.
- Geographic address pins (GA[2:0]) identify PSU slot position for system management.
### 7. Performance & Capabilities
Electrical Performance:
- Output Stability: ±1 % (+5 V) under full dynamic load.
- Transient Response: Recovers within 1 ms for 50 % load step.
- Efficiency: 73 % typical at nominal input and full load.
- Noise & Ripple: ≤ 100 mV p‑p across all outputs.
- Hold‑Up Time: ≥ 6 ms ensures uninterrupted operation during brief input dips.
Thermal Performance:
- Full‑load operation up to 40 °C ambient with 15 CFM airflow.
- Derated operation up to 70 °C.
- Internal thermal shutdown at 95 °C with automatic recovery.
Redundancy & Hot‑Swap:
- Supports N+1 redundancy; automatic current sharing on +5 V and +3.3 V rails.
- Fault isolation ensures defective module removal without affecting system power.
Limitations:
- Requires minimum 2 A load on +5 V rail for regulation stability.
- Not designed for standalone use outside CompactPCI backplane environment.
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (47‑pin connector)
- PICMG 2.0 R2.1: CompactPCI System Architecture compliance
- IEC 60950 / UL 1950 / CSA C22.2 No. 950: Safety standards for information technology equipment
- EN 55022 Class A: EMI emission compliance
- EN 50082‑2 / IEC 1000‑4‑2/3/4/5/11: EMC immunity standards
- CE Mark: Conforms to European safety and EMC directives
Environmental & Reliability Standards:
- MIL‑HDBK‑217E: MTBF calculation methodology
- RoHS: (Depending on production date) compliant with hazardous substance restrictions
Mechanical Interface:
- Connector: Positronic PCIH47M400A1 male, mating with PCIH47F300A1 female on backplane
- Pin Assignments:
- Power rails: V1 (+5 V), V2 (+3.3 V), V3 (+12 V), V4 (−12 V)
- Control: EN#, INH#, DEG#, FAL#, GA[2:0]
- Sense: V1SENSE, V2SENSE, SRTN
- Ground: RTN, CGND
### 9. Additional Information
Warranty:
- Duration: 1 year from confirmed date of purchase.
- Coverage: Free from defects in materials and workmanship under normal use.
- Exclusions: Damage due to misuse, modification, or operation beyond specifications.
- Service Procedure: Return postage‑paid with proof of purchase; ADLINK will repair or replace defective units.
Support & Contact:
- Manufacturer: ADLINK Technology Inc.
- Headquarters: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan R.O.C.
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Web: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- Sales & Service: service@adlink.com.tw
- Technical Support (NuIPC): nuipc@adlink.com.tw
Maintenance:
- Periodically inspect connectors and ensure adequate airflow.
- Clean dust filters in chassis to maintain cooling efficiency.
- Replace defective modules only with identical ADLINK‑approved units.
Software/Firmware Updates:
- The cPWR‑1520A is a hardware power module; no firmware updates are applicable.
Safety Notes:
- Ensure correct polarity of DC input (−DC = return, +DC = positive).
- Do not insert into non‑PICMG 2.11 backplanes.
- Improper connection of sense lines may damage the unit.
### Summary
The ADLINK cPWR‑1520A is a 150 W, 24 V DC‑input, 3U CompactPCI redundant power supply engineered for industrial and embedded computing environments requiring high reliability and modular redundancy. It delivers regulated +5 V, +3.3 V, ±12 V outputs through a standard 47‑pin CompactPCI connector, supporting hot‑swap and current‑sharing operation per PICMG 2.11.
Its compact 3U form factor, robust protection features, and compliance with international safety and EMC standards make it ideal for mission‑critical CompactPCI platforms such as ADLINK’s cPCIS‑1000 and cPCIS‑2000 systems. With a one‑year manufacturer warranty and full support from ADLINK Technology, the cPWR‑1520A provides a dependable power foundation for high‑availability industrial computing applications.
### 1. Product Overview
Product Name: cPWR‑1520A
Article Number: cPWR‑1520A
Series: cPCIS‑1000/2000 Series Components
Product Type: 3U CompactPCI Redundant Power Supply
Manufacturer: ADLINK Technology Inc.
Brand: NuIPC® (registered trademark of ADLINK Technology Inc.)
Product Description: CompactPCI 3U redundant power supply, 150 W output, 24 V DC input, standard 47‑pin connector for DC input and DC output.
Intended Platform: Designed for integration into ADLINK’s cPCIS‑1000 and cPCIS‑2000 3U CompactPCI sub‑systems and compatible backplanes (e.g., cBP‑3062).
### 2. Key Features
- CompactPCI 3U Form Factor: Fully compliant with PICMG 2.11 CompactPCI power interface standard, ensuring interoperability with standard 3U/6U CompactPCI chassis and backplanes.
- Redundant Power Architecture: Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown.
- Input Voltage: 24 V DC nominal input, designed for industrial DC power environments.
- Output Power: 150 W total continuous output capacity, optimized for embedded and industrial computing platforms.
- Connector Interface: Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane.
- High Reliability: Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E).
- Hot‑Swappable Operation: Enables live insertion and removal in redundant configurations, minimizing downtime.
- Compact and Lightweight: 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg.
- Comprehensive Protection: Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal.
- Status Indicators: Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics.
- Compliance: Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).
### 3. Technical Specifications
Electrical Input
- Input Voltage Range: 18 V DC – 36 V DC (nominal 24 V DC)
- Input Current: ≤ 20 A at full load
- Inrush Current: < 40 A
- Efficiency: Typical 73 %
- Power Factor: Not applicable (DC input)
- Protection: Fuse, over‑voltage, under‑voltage, and surge protection
Electrical Output
- Rated Power: 150 W continuous
- Output Voltages: +5 V, +3.3 V, +12 V, −12 V
- Maximum Output Currents:
- +5 V @ 25 A
- +3.3 V @ 25 A
- +12 V @ 3 A
- −12 V @ 1 A
- Combined +5 V and +3.3 V ≤ 27 A
- Voltage Accuracy: ±3 % (+5 V), ±5 % (others)
- Ripple & Noise: ≤ 100 mV p‑p or 1 % of output (whichever greater)
- Load Regulation: ±1 % (+5 V), ±3 % (+3.3 V, ±12 V)
- Line Regulation: ±0.3 %
- Hold‑Up Time: ≥ 6 ms
- Rise Time: < 500 ms (all outputs within 10 ms of each other)
- Temperature Coefficient: 0.05 % / °C
- Minimum Load: 2 A @ +5 V
Mechanical Characteristics
- Form Factor: 3U CompactPCI plug‑in module
- Dimensions: 40.0 (W) × 128.5 (H) × 172.8 (D) mm
- Weight: ≈ 0.85 kg
- Cooling: Forced‑air (15 CFM recommended)
Environmental Conditions
- Operating Temperature: 0 °C – 70 °C (full power to 40 °C with forced air)
- Storage Temperature: −10 °C – +85 °C
- Relative Humidity: < 95 % @ 40 °C, non‑condensing
- Altitude: Up to 6,400 m
- Vibration: 5 – 55 Hz, 0.38 mm displacement, 30 min per axis (X/Y/Z)
- Shock: Non‑operating, 2 cycles per axis
Reliability
- MTBF: 100,000 hours (MIL‑HDBK‑217E)
- MTTR: 5 minutes (module replacement)
### 4. Functionality
The cPWR‑1520A operates as a modular DC‑input power supply for CompactPCI systems. It converts a 24 V DC input into regulated system voltages (+5 V, +3.3 V, ±12 V) required by CompactPCI backplanes and peripheral modules.
Operational Principles:
- The unit plugs directly into a 47‑pin CompactPCI power slot on a compliant backplane (e.g., cBP‑3062).
- It supports hot‑swap insertion/removal under load when used in redundant pairs.
- Internal current‑sharing circuitry allows multiple units to operate in parallel, balancing load within ±10 %.
- Control signals (EN#, INH#, DEG#, FAL#) manage enable/inhibit, derating, and fault reporting to the system controller.
- Sense lines (V1SENSE, V2SENSE) compensate for voltage drops across the backplane, ensuring precise regulation at the load.
Typical Applications:
- Industrial automation controllers
- Embedded computing platforms
- Telecommunications and networking CompactPCI systems
- Transportation and defense electronics requiring DC power input
- Redundant power configurations in mission‑critical systems
Compatibility:
- Fully compatible with ADLINK cBP‑3062 redundant backplane and cPCIS‑2000/1000 chassis.
- Supports integration with other PICMG 2.11‑compliant CompactPCI systems.
### 5. Components & Accessories
Included Components:
- cPWR‑1520A power supply module (47‑pin connector)
- Front panel with LED indicators (POWER OK, FAULT)
- Integrated cooling vents and handle for hot‑swap operation
Optional / Compatible Accessories:
- Backplanes:
- cBP‑3062 (dual 47‑pin redundant PSU backplane)
- cBP‑3200/3400 series (3U CompactPCI backplanes)
- Chassis:
- cPCIS‑2000A/B (3U CompactPCI chassis with 2 or 4 fans)
- cPCIS‑1000 (3U CompactPCI card cage)
- Mounting Frames:
- cPCI‑PSF (PS2‑size PSU frame)
- Cables & Connectors:
- Positronic PCIH47F300A1 mating connector
- Screw‑terminal AC/DC input adapters (for backplane connection)
### 6. Installation & Setup
Pre‑Installation Requirements:
- Ensure the backplane connector is Positronic PCIH47F300A1 or equivalent per PICMG 2.11.
- Verify system DC input (24 V DC) is within specified range (18–36 V DC).
- Confirm adequate forced‑air cooling (≥ 15 CFM).
Installation Steps:
1. Power off or isolate redundant channel before insertion.
2. Align the module with the CompactPCI power slot guide rails.
3. Insert firmly until the connector is fully seated.
4. Secure the front panel latch.
5. Apply DC input power; verify green “POWER” LED illuminates.
6. In redundant systems, confirm both units share load evenly (±10 %).
Hot‑Swap Procedure:
- The unit supports live insertion/removal when the system backplane and controller support PICMG 2.11 hot‑swap signaling.
- The INH# and EN# signals coordinate power sequencing to prevent bus disturbances.
Configuration:
- Sense lines (V1SENSE, V2SENSE) must be connected to the backplane’s power planes.
- Optional derating (DEG#) and fault (FAL#) signals can be monitored by the system controller.
- Geographic address pins (GA[2:0]) identify PSU slot position for system management.
### 7. Performance & Capabilities
Electrical Performance:
- Output Stability: ±1 % (+5 V) under full dynamic load.
- Transient Response: Recovers within 1 ms for 50 % load step.
- Efficiency: 73 % typical at nominal input and full load.
- Noise & Ripple: ≤ 100 mV p‑p across all outputs.
- Hold‑Up Time: ≥ 6 ms ensures uninterrupted operation during brief input dips.
Thermal Performance:
- Full‑load operation up to 40 °C ambient with 15 CFM airflow.
- Derated operation up to 70 °C.
- Internal thermal shutdown at 95 °C with automatic recovery.
Redundancy & Hot‑Swap:
- Supports N+1 redundancy; automatic current sharing on +5 V and +3.3 V rails.
- Fault isolation ensures defective module removal without affecting system power.
Limitations:
- Requires minimum 2 A load on +5 V rail for regulation stability.
- Not designed for standalone use outside CompactPCI backplane environment.
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (47‑pin connector)
- PICMG 2.0 R2.1: CompactPCI System Architecture compliance
- IEC 60950 / UL 1950 / CSA C22.2 No. 950: Safety standards for information technology equipment
- EN 55022 Class A: EMI emission compliance
- EN 50082‑2 / IEC 1000‑4‑2/3/4/5/11: EMC immunity standards
- CE Mark: Conforms to European safety and EMC directives
Environmental & Reliability Standards:
- MIL‑HDBK‑217E: MTBF calculation methodology
- RoHS: (Depending on production date) compliant with hazardous substance restrictions
Mechanical Interface:
- Connector: Positronic PCIH47M400A1 male, mating with PCIH47F300A1 female on backplane
- Pin Assignments:
- Power rails: V1 (+5 V), V2 (+3.3 V), V3 (+12 V), V4 (−12 V)
- Control: EN#, INH#, DEG#, FAL#, GA[2:0]
- Sense: V1SENSE, V2SENSE, SRTN
- Ground: RTN, CGND
### 9. Additional Information
Warranty:
- Duration: 1 year from confirmed date of purchase.
- Coverage: Free from defects in materials and workmanship under normal use.
- Exclusions: Damage due to misuse, modification, or operation beyond specifications.
- Service Procedure: Return postage‑paid with proof of purchase; ADLINK will repair or replace defective units.
Support & Contact:
- Manufacturer: ADLINK Technology Inc.
- Headquarters: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan R.O.C.
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Web: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- Sales & Service: service@adlink.com.tw
- Technical Support (NuIPC): nuipc@adlink.com.tw
Maintenance:
- Periodically inspect connectors and ensure adequate airflow.
- Clean dust filters in chassis to maintain cooling efficiency.
- Replace defective modules only with identical ADLINK‑approved units.
Software/Firmware Updates:
- The cPWR‑1520A is a hardware power module; no firmware updates are applicable.
Safety Notes:
- Ensure correct polarity of DC input (−DC = return, +DC = positive).
- Do not insert into non‑PICMG 2.11 backplanes.
- Improper connection of sense lines may damage the unit.
### Summary
The ADLINK cPWR‑1520A is a 150 W, 24 V DC‑input, 3U CompactPCI redundant power supply engineered for industrial and embedded computing environments requiring high reliability and modular redundancy. It delivers regulated +5 V, +3.3 V, ±12 V outputs through a standard 47‑pin CompactPCI connector, supporting hot‑swap and current‑sharing operation per PICMG 2.11.
Its compact 3U form factor, robust protection features, and compliance with international safety and EMC standards make it ideal for mission‑critical CompactPCI platforms such as ADLINK’s cPCIS‑1000 and cPCIS‑2000 systems. With a one‑year manufacturer warranty and full support from ADLINK Technology, the cPWR‑1520A provides a dependable power foundation for high‑availability industrial computing applications.
