SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
EX9060D-M
4*DI (Isolation), 4*Relay output, LED, Modbus
125,00 EUR
inkl. Umsatzsteuer 148,75 EUR
- 4 × Isolated Digital Inputs:
Four optically isolated input channels with 3750 Vrms isolation and 3 kΩ input impedance.
Logic levels: Low < +1 V DC, High = +4 V to +30 V DC.
- 4 × Relay Outputs:
Four independent relay outputs: RL1–RL2 (Form A) and RL3–RL4 (Form C).
Contact ratings: 0.6 A @ 125 VAC / 2 A @ 30 V DC.
Operate time ≤ 3 ms, release time ≤ 2 ms.
Minimum mechanical life ≥ 5 × 10⁵ operations.
- High Isolation and Reliability:
3750 Vrms isolation between channels and logic circuits.
1000 MΩ insulation resistance at 500 V DC.
Surge strength 500 V.
- RS‑485 Communication Interface:
Two‑wire half‑duplex RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps.
Supports Modbus RTU protocol for easy integration with PLCs, SCADA, and HMI systems.
Up to 256 modules can be connected on a single RS‑485 bus (max 1200 m without repeater).
- LED Channel Indicators:
Eight LEDs (four for inputs, four for outputs) provide real‑time channel status visualization.
- Dual Watchdog System:
Hardware (module) and software (host) watchdogs ensure continuous operation and fail‑safe behavior.
Host watchdog timeout automatically sets outputs to predefined safe values.
- Wide Power Supply Range:
Operates from +10 V DC to +30 V DC (typical 1.8 W consumption).
- Extended Temperature Range:
Operating −25 °C to +75 °C; storage −30 °C to +75 °C.
- EEPROM Configuration Storage:
Retains address, baud rate, and protocol settings even after power loss.
- INIT* Mode for Configuration Recovery:
Hardware switch or pin allows reset to default communication parameters for troubleshooting.
- Compact, Rugged Design:
Industrial‑grade enclosure suitable for DIN‑rail or panel mounting.
Four optically isolated input channels with 3750 Vrms isolation and 3 kΩ input impedance.
Logic levels: Low < +1 V DC, High = +4 V to +30 V DC.
- 4 × Relay Outputs:
Four independent relay outputs: RL1–RL2 (Form A) and RL3–RL4 (Form C).
Contact ratings: 0.6 A @ 125 VAC / 2 A @ 30 V DC.
Operate time ≤ 3 ms, release time ≤ 2 ms.
Minimum mechanical life ≥ 5 × 10⁵ operations.
- High Isolation and Reliability:
3750 Vrms isolation between channels and logic circuits.
1000 MΩ insulation resistance at 500 V DC.
Surge strength 500 V.
- RS‑485 Communication Interface:
Two‑wire half‑duplex RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps.
Supports Modbus RTU protocol for easy integration with PLCs, SCADA, and HMI systems.
Up to 256 modules can be connected on a single RS‑485 bus (max 1200 m without repeater).
- LED Channel Indicators:
Eight LEDs (four for inputs, four for outputs) provide real‑time channel status visualization.
- Dual Watchdog System:
Hardware (module) and software (host) watchdogs ensure continuous operation and fail‑safe behavior.
Host watchdog timeout automatically sets outputs to predefined safe values.
- Wide Power Supply Range:
Operates from +10 V DC to +30 V DC (typical 1.8 W consumption).
- Extended Temperature Range:
Operating −25 °C to +75 °C; storage −30 °C to +75 °C.
- EEPROM Configuration Storage:
Retains address, baud rate, and protocol settings even after power loss.
- INIT* Mode for Configuration Recovery:
Hardware switch or pin allows reset to default communication parameters for troubleshooting.
- Compact, Rugged Design:
Industrial‑grade enclosure suitable for DIN‑rail or panel mounting.
Comprehensive Product Summary: ExpertDAQ EX9060D‑M RS‑485 Relay and Digital Input Module
### 1. Product Overview
Product Name: ExpertDAQ EX9060D‑M
Model: EX9060D‑M
Series: EX9000 Series Distributed I/O Modules
Article Number: EX9060D‑M
Manufacturer: ExpertDAQ (Expert Data Acquisition Systems)
The ExpertDAQ EX9060D‑M is a compact, industrial‑grade RS‑485 relay and digital input module designed for distributed control and monitoring applications. It provides four isolated digital input channels and four relay output channels (two Form A and two Form C) with Modbus RTU communication support. The module is engineered for robust performance in harsh environments, offering high isolation, fast switching, and reliable operation across a wide temperature range. It is part of the ExpertDAQ EX9000 family, which includes a variety of digital and analog I/O modules for industrial automation, remote monitoring, and data acquisition systems.
### 2. Key Features
- 4 × Isolated Digital Inputs:
Four optically isolated input channels with 3750 Vrms isolation and 3 kΩ input impedance.
Logic levels: Low < +1 V DC, High = +4 V to +30 V DC.
- 4 × Relay Outputs:
Four independent relay outputs: RL1–RL2 (Form A) and RL3–RL4 (Form C).
Contact ratings: 0.6 A @ 125 VAC / 2 A @ 30 V DC.
Operate time ≤ 3 ms, release time ≤ 2 ms.
Minimum mechanical life ≥ 5 × 10⁵ operations.
- High Isolation and Reliability:
3750 Vrms isolation between channels and logic circuits.
1000 MΩ insulation resistance at 500 V DC.
Surge strength 500 V.
- RS‑485 Communication Interface:
Two‑wire half‑duplex RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps.
Supports Modbus RTU protocol for easy integration with PLCs, SCADA, and HMI systems.
Up to 256 modules can be connected on a single RS‑485 bus (max 1200 m without repeater).
- LED Channel Indicators:
Eight LEDs (four for inputs, four for outputs) provide real‑time channel status visualization.
- Dual Watchdog System:
Hardware (module) and software (host) watchdogs ensure continuous operation and fail‑safe behavior.
Host watchdog timeout automatically sets outputs to predefined safe values.
- Wide Power Supply Range:
Operates from +10 V DC to +30 V DC (typical 1.8 W consumption).
- Extended Temperature Range:
Operating −25 °C to +75 °C; storage −30 °C to +75 °C.
- EEPROM Configuration Storage:
Retains address, baud rate, and protocol settings even after power loss.
- INIT* Mode for Configuration Recovery:
Hardware switch or pin allows reset to default communication parameters for troubleshooting.
- Compact, Rugged Design:
Industrial‑grade enclosure suitable for DIN‑rail or panel mounting.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | EX9060D‑M |
| Communication Interface | RS‑485, 2‑wire, half‑duplex |
| Supported Protocols | Modbus RTU |
| Baud Rates | 1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 57.6 k, 115.2 k bps |
| Digital Inputs | 4 isolated channels (common source) |
| Input Impedance | 3 kΩ |
| Logic Level 0 | ≤ +1 V DC |
| Logic Level 1 | +4 V to +30 V DC |
| Isolation Voltage | 3750 Vrms (optical isolation) |
| Digital Outputs | 4 relay outputs (RL1–RL2 Form A, RL3–RL4 Form C) |
| Contact Rating (AC) | 125 V AC @ 0.6 A |
| Contact Rating (DC) | 30 V DC @ 2 A |
| Operate Time | 3 ms max |
| Release Time | 2 ms max |
| Insulation Resistance | 1000 MΩ @ 500 V DC |
| Surge Strength | 500 V |
| Relay Lifetime | ≥ 5 × 10⁵ operations |
| Power Supply | +10 V DC to +30 V DC |
| Power Consumption | 1.8 W (typical) |
| Operating Temperature | −25 °C to +75 °C |
| Storage Temperature | −30 °C to +75 °C |
| LED Indicators | 8 (4 DI + 4 DO status) |
| Isolation Between Channels | 3750 Vrms |
| Mounting | DIN‑rail or panel mount |
| Communication Distance | Up to 1200 m without repeater |
| Max Modules per Bus | 256 modules |
| Housing Material | Industrial ABS or metal enclosure (depending on variant) |
| Protection | ESD and surge protected I/O lines |
### 4. Functionality
The EX9060D‑M functions as a distributed digital I/O node in an RS‑485 network. It converts field‑level digital signals into Modbus RTU data accessible by supervisory controllers or PLCs.
Operation Principle:
- Digital Inputs: Each input channel detects voltage levels from external sensors, switches, or logic devices. The opto‑isolation barrier protects the internal circuitry from high‑voltage transients.
- Relay Outputs: Each relay channel can switch AC or DC loads such as solenoids, contactors, lamps, or alarms. Two Form A (Normally Open) and two Form C (Changeover) contacts provide flexible control options.
- Communication: The module exchanges data via RS‑485 using Modbus RTU commands. It supports standard Modbus function codes (0x01, 0x02, 0x03, 0x04, 0x05, 0x0F, 0x06) for reading/writing I/O status, counters, and configuration parameters.
- Watchdog Protection: If communication is lost or the host fails, the module automatically sets outputs to predefined Safe Values to prevent uncontrolled states.
- EEPROM Storage: All configuration parameters (address, baud rate, protocol mode) are stored in non‑volatile memory.
Typical Applications:
- Industrial automation and process control
- Building management systems (BMS)
- Remote monitoring and data acquisition (SCADA)
- Machine status monitoring and alarm signaling
- Energy management and environmental control
- Distributed relay control in factory automation
Compatibility:
- Compatible with any Modbus RTU master device (PLC, HMI, SCADA software).
- Integrates with ExpertDAQ EX9000 series modules for mixed I/O systems.
- Supports standard RS‑485 network topologies with termination and bias resistors.
### 5. Components & Accessories
Included Items:
- EX9060D‑M module
- User manual and configuration guide
- Mounting clips (for DIN‑rail installation)
- Terminal block connectors for I/O and power
Optional Accessories:
- RS‑485 repeaters (for extended distance > 1200 m)
- USB‑to‑RS‑485 converter (for PC configuration)
- External power supply (10–30 V DC)
- ExpertDAQ configuration software for Windows
Connectors:
- Power Input: 2‑pin terminal block (+V, GND)
- RS‑485 Port: 2‑pin terminal block (DATA+, DATA−)
- Digital Inputs: 4‑pin terminal block (DI1–DI4 + common)
- Relay Outputs: 8‑pin terminal block (RL1–RL4 contacts)
### 6. Installation & Setup
Requirements:
- DC power supply (10–30 V DC)
- RS‑485 network connection with proper termination
- Modbus RTU master device or ExpertDAQ configuration software
Mounting Options:
- DIN‑rail mount (standard 35 mm)
- Panel mount using screw holes
Configuration Procedure:
1. Power Off the module before wiring.
2. Connect power supply and RS‑485 bus lines (DATA+, DATA−).
3. Wire digital inputs and relay outputs according to the wiring diagram.
4. Power on the module; default address = 01, baud rate = 9600 bps, Modbus RTU mode.
5. Use Modbus commands or ExpertDAQ software to set address, baud rate, and safe/power‑on values.
6. For recovery or reconfiguration, activate INIT* mode by shorting the INIT* pin to GND or using the rear switch.
Default Settings:
- Protocol: Modbus RTU
- Module Address: 01
- Baud Rate: 9600 bps
- DIO Type: 40
### 7. Performance & Capabilities
- Switching Speed: Relay operate time 3 ms max, release time 2 ms max.
- Load Capacity: 0.6 A @ 125 VAC or 2 A @ 30 V DC per channel.
- Input Response: Supports TTL/CMOS and dry‑contact inputs.
- Reliability: ≥ 500,000 mechanical operations per relay.
- Communication Capacity: Up to 256 modules on one RS‑485 bus.
- Cable Length: 1200 m max without repeater.
- Power Efficiency: Low consumption (1.8 W typical).
- Fail‑Safe Operation: Outputs revert to Safe Value on watchdog timeout or communication failure.
- Data Integrity: Checksum and EEPROM storage ensure configuration retention.
Limitations:
- Relay contacts not suitable for high‑current loads > 2 A DC or > 0.6 A AC.
- Requires external protection for inductive loads (flyback diodes or snubbers).
- RS‑485 bus requires proper termination and biasing for long cables.
### 8. Standards & Compliance
- Communication Standard: Modbus RTU (ANSI EIA/TIA‑485‑A compliant)
- Isolation Standard: 3750 Vrms optical isolation between I/O and logic
- EMC Protection: ESD and surge protection on I/O lines
- Environmental Compliance: Designed for industrial temperature range (−25 °C to +75 °C)
- Safety and Reliability: Dual watchdog system ensures fail‑safe operation
- Quality Assurance: Manufactured under ExpertDAQ industrial quality standards
### 9. Additional Information
Warranty & Support:
ExpertDAQ provides a standard manufacturer’s warranty covering defects in materials and workmanship. Technical support and firmware updates are available through ExpertDAQ’s official support channels.
Maintenance:
- Periodically inspect relay contacts for wear in high‑cycle applications.
- Ensure clean and tight terminal connections.
- Avoid exposure to excessive moisture or corrosive environments.
- Use proper surge protection for inductive loads.
Firmware & Updates:
Firmware version can be read via Modbus command `$AAF`. Example: `!01D03.11` indicates firmware version D03.11. Updates may be available from ExpertDAQ for enhanced functionality or bug fixes.
Safety Notes:
- Disconnect power before wiring or maintenance.
- Observe maximum voltage and current ratings for relay contacts.
- Use proper RS‑485 termination resistors (typically 120 Ω at each end of the bus).
Documentation & Software:
- ExpertDAQ EX9000 User Manual (for command sets and protocol details)
- Modbus Mapping Tables for EX9060M (DI × 4, DO × 4)
- Configuration utility for Windows (available from ExpertDAQ website)
### Summary
The ExpertDAQ EX9060D‑M is a versatile, high‑isolation RS‑485 relay and digital input module tailored for industrial automation and remote I/O applications. It combines four isolated digital inputs and four relay outputs with fast switching times, robust electrical isolation, and Modbus RTU communication. Its dual watchdog architecture and EEPROM‑based configuration storage ensure reliable, fail‑safe operation in demanding environments. With a wide power supply range, extended temperature tolerance, and support for up to 256 modules on a single RS‑485 network, the EX9060D‑M is an ideal solution for distributed control systems, machine automation, and SCADA integration.
### 1. Product Overview
Product Name: ExpertDAQ EX9060D‑M
Model: EX9060D‑M
Series: EX9000 Series Distributed I/O Modules
Article Number: EX9060D‑M
Manufacturer: ExpertDAQ (Expert Data Acquisition Systems)
The ExpertDAQ EX9060D‑M is a compact, industrial‑grade RS‑485 relay and digital input module designed for distributed control and monitoring applications. It provides four isolated digital input channels and four relay output channels (two Form A and two Form C) with Modbus RTU communication support. The module is engineered for robust performance in harsh environments, offering high isolation, fast switching, and reliable operation across a wide temperature range. It is part of the ExpertDAQ EX9000 family, which includes a variety of digital and analog I/O modules for industrial automation, remote monitoring, and data acquisition systems.
### 2. Key Features
- 4 × Isolated Digital Inputs:
Four optically isolated input channels with 3750 Vrms isolation and 3 kΩ input impedance.
Logic levels: Low < +1 V DC, High = +4 V to +30 V DC.
- 4 × Relay Outputs:
Four independent relay outputs: RL1–RL2 (Form A) and RL3–RL4 (Form C).
Contact ratings: 0.6 A @ 125 VAC / 2 A @ 30 V DC.
Operate time ≤ 3 ms, release time ≤ 2 ms.
Minimum mechanical life ≥ 5 × 10⁵ operations.
- High Isolation and Reliability:
3750 Vrms isolation between channels and logic circuits.
1000 MΩ insulation resistance at 500 V DC.
Surge strength 500 V.
- RS‑485 Communication Interface:
Two‑wire half‑duplex RS‑485 interface supporting baud rates from 1200 bps to 115.2 kbps.
Supports Modbus RTU protocol for easy integration with PLCs, SCADA, and HMI systems.
Up to 256 modules can be connected on a single RS‑485 bus (max 1200 m without repeater).
- LED Channel Indicators:
Eight LEDs (four for inputs, four for outputs) provide real‑time channel status visualization.
- Dual Watchdog System:
Hardware (module) and software (host) watchdogs ensure continuous operation and fail‑safe behavior.
Host watchdog timeout automatically sets outputs to predefined safe values.
- Wide Power Supply Range:
Operates from +10 V DC to +30 V DC (typical 1.8 W consumption).
- Extended Temperature Range:
Operating −25 °C to +75 °C; storage −30 °C to +75 °C.
- EEPROM Configuration Storage:
Retains address, baud rate, and protocol settings even after power loss.
- INIT* Mode for Configuration Recovery:
Hardware switch or pin allows reset to default communication parameters for troubleshooting.
- Compact, Rugged Design:
Industrial‑grade enclosure suitable for DIN‑rail or panel mounting.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Model | EX9060D‑M |
| Communication Interface | RS‑485, 2‑wire, half‑duplex |
| Supported Protocols | Modbus RTU |
| Baud Rates | 1200, 2400, 4800, 9600, 19.2 k, 38.4 k, 57.6 k, 115.2 k bps |
| Digital Inputs | 4 isolated channels (common source) |
| Input Impedance | 3 kΩ |
| Logic Level 0 | ≤ +1 V DC |
| Logic Level 1 | +4 V to +30 V DC |
| Isolation Voltage | 3750 Vrms (optical isolation) |
| Digital Outputs | 4 relay outputs (RL1–RL2 Form A, RL3–RL4 Form C) |
| Contact Rating (AC) | 125 V AC @ 0.6 A |
| Contact Rating (DC) | 30 V DC @ 2 A |
| Operate Time | 3 ms max |
| Release Time | 2 ms max |
| Insulation Resistance | 1000 MΩ @ 500 V DC |
| Surge Strength | 500 V |
| Relay Lifetime | ≥ 5 × 10⁵ operations |
| Power Supply | +10 V DC to +30 V DC |
| Power Consumption | 1.8 W (typical) |
| Operating Temperature | −25 °C to +75 °C |
| Storage Temperature | −30 °C to +75 °C |
| LED Indicators | 8 (4 DI + 4 DO status) |
| Isolation Between Channels | 3750 Vrms |
| Mounting | DIN‑rail or panel mount |
| Communication Distance | Up to 1200 m without repeater |
| Max Modules per Bus | 256 modules |
| Housing Material | Industrial ABS or metal enclosure (depending on variant) |
| Protection | ESD and surge protected I/O lines |
### 4. Functionality
The EX9060D‑M functions as a distributed digital I/O node in an RS‑485 network. It converts field‑level digital signals into Modbus RTU data accessible by supervisory controllers or PLCs.
Operation Principle:
- Digital Inputs: Each input channel detects voltage levels from external sensors, switches, or logic devices. The opto‑isolation barrier protects the internal circuitry from high‑voltage transients.
- Relay Outputs: Each relay channel can switch AC or DC loads such as solenoids, contactors, lamps, or alarms. Two Form A (Normally Open) and two Form C (Changeover) contacts provide flexible control options.
- Communication: The module exchanges data via RS‑485 using Modbus RTU commands. It supports standard Modbus function codes (0x01, 0x02, 0x03, 0x04, 0x05, 0x0F, 0x06) for reading/writing I/O status, counters, and configuration parameters.
- Watchdog Protection: If communication is lost or the host fails, the module automatically sets outputs to predefined Safe Values to prevent uncontrolled states.
- EEPROM Storage: All configuration parameters (address, baud rate, protocol mode) are stored in non‑volatile memory.
Typical Applications:
- Industrial automation and process control
- Building management systems (BMS)
- Remote monitoring and data acquisition (SCADA)
- Machine status monitoring and alarm signaling
- Energy management and environmental control
- Distributed relay control in factory automation
Compatibility:
- Compatible with any Modbus RTU master device (PLC, HMI, SCADA software).
- Integrates with ExpertDAQ EX9000 series modules for mixed I/O systems.
- Supports standard RS‑485 network topologies with termination and bias resistors.
### 5. Components & Accessories
Included Items:
- EX9060D‑M module
- User manual and configuration guide
- Mounting clips (for DIN‑rail installation)
- Terminal block connectors for I/O and power
Optional Accessories:
- RS‑485 repeaters (for extended distance > 1200 m)
- USB‑to‑RS‑485 converter (for PC configuration)
- External power supply (10–30 V DC)
- ExpertDAQ configuration software for Windows
Connectors:
- Power Input: 2‑pin terminal block (+V, GND)
- RS‑485 Port: 2‑pin terminal block (DATA+, DATA−)
- Digital Inputs: 4‑pin terminal block (DI1–DI4 + common)
- Relay Outputs: 8‑pin terminal block (RL1–RL4 contacts)
### 6. Installation & Setup
Requirements:
- DC power supply (10–30 V DC)
- RS‑485 network connection with proper termination
- Modbus RTU master device or ExpertDAQ configuration software
Mounting Options:
- DIN‑rail mount (standard 35 mm)
- Panel mount using screw holes
Configuration Procedure:
1. Power Off the module before wiring.
2. Connect power supply and RS‑485 bus lines (DATA+, DATA−).
3. Wire digital inputs and relay outputs according to the wiring diagram.
4. Power on the module; default address = 01, baud rate = 9600 bps, Modbus RTU mode.
5. Use Modbus commands or ExpertDAQ software to set address, baud rate, and safe/power‑on values.
6. For recovery or reconfiguration, activate INIT* mode by shorting the INIT* pin to GND or using the rear switch.
Default Settings:
- Protocol: Modbus RTU
- Module Address: 01
- Baud Rate: 9600 bps
- DIO Type: 40
### 7. Performance & Capabilities
- Switching Speed: Relay operate time 3 ms max, release time 2 ms max.
- Load Capacity: 0.6 A @ 125 VAC or 2 A @ 30 V DC per channel.
- Input Response: Supports TTL/CMOS and dry‑contact inputs.
- Reliability: ≥ 500,000 mechanical operations per relay.
- Communication Capacity: Up to 256 modules on one RS‑485 bus.
- Cable Length: 1200 m max without repeater.
- Power Efficiency: Low consumption (1.8 W typical).
- Fail‑Safe Operation: Outputs revert to Safe Value on watchdog timeout or communication failure.
- Data Integrity: Checksum and EEPROM storage ensure configuration retention.
Limitations:
- Relay contacts not suitable for high‑current loads > 2 A DC or > 0.6 A AC.
- Requires external protection for inductive loads (flyback diodes or snubbers).
- RS‑485 bus requires proper termination and biasing for long cables.
### 8. Standards & Compliance
- Communication Standard: Modbus RTU (ANSI EIA/TIA‑485‑A compliant)
- Isolation Standard: 3750 Vrms optical isolation between I/O and logic
- EMC Protection: ESD and surge protection on I/O lines
- Environmental Compliance: Designed for industrial temperature range (−25 °C to +75 °C)
- Safety and Reliability: Dual watchdog system ensures fail‑safe operation
- Quality Assurance: Manufactured under ExpertDAQ industrial quality standards
### 9. Additional Information
Warranty & Support:
ExpertDAQ provides a standard manufacturer’s warranty covering defects in materials and workmanship. Technical support and firmware updates are available through ExpertDAQ’s official support channels.
Maintenance:
- Periodically inspect relay contacts for wear in high‑cycle applications.
- Ensure clean and tight terminal connections.
- Avoid exposure to excessive moisture or corrosive environments.
- Use proper surge protection for inductive loads.
Firmware & Updates:
Firmware version can be read via Modbus command `$AAF`. Example: `!01D03.11` indicates firmware version D03.11. Updates may be available from ExpertDAQ for enhanced functionality or bug fixes.
Safety Notes:
- Disconnect power before wiring or maintenance.
- Observe maximum voltage and current ratings for relay contacts.
- Use proper RS‑485 termination resistors (typically 120 Ω at each end of the bus).
Documentation & Software:
- ExpertDAQ EX9000 User Manual (for command sets and protocol details)
- Modbus Mapping Tables for EX9060M (DI × 4, DO × 4)
- Configuration utility for Windows (available from ExpertDAQ website)
### Summary
The ExpertDAQ EX9060D‑M is a versatile, high‑isolation RS‑485 relay and digital input module tailored for industrial automation and remote I/O applications. It combines four isolated digital inputs and four relay outputs with fast switching times, robust electrical isolation, and Modbus RTU communication. Its dual watchdog architecture and EEPROM‑based configuration storage ensure reliable, fail‑safe operation in demanding environments. With a wide power supply range, extended temperature tolerance, and support for up to 256 modules on a single RS‑485 network, the EX9060D‑M is an ideal solution for distributed control systems, machine automation, and SCADA integration.
Kein Zubehör vorhanden.
