EX-9510/A repeater boosts the RS-422(EX9510A)/485 signals to extend the reach distance up to 4000 ft (1200m) and increase the maximum number of connected nodes up to 128, with a special circuitry, EX-9510/A is able to automatically detect the data flow and switch the direction of the data lines accordingly, “Auto baud rate detector” enables EX-9510/A to automatically configure RS-422(EX9510A)/485 signals to any baud rate without external switch setting, build in Opto-isolations on EX-9510/A provides 3000VDC of isolation to protect the host computer from ground loops and destructive voltage spikes on the RS-422(EX9510A)/485 data lines, EX-9510 also offers internal surge-protection on the data lines, Internal high-speed transient suppressors on each data line protect the module from dangerous voltages levels or spikes, Features:, automatic internal RS-422(EX9510A)/485 bus supervision, No external flow control signals required for RS-485, Minimum 3000VDC isolation protection, Transient suppression on RS-485 data lines, Supported baud rate up to 115.2Kbps, Reach distance up to 4000 feet (1200m), Reserved space for termination resistors (R8,R9), Power and data flow indicator for troubleshooting, Power requirement: +10V to +30VDC, Mounts easily on DIN-rail or panel, Specifications:, Power requirement: Unregulated +10 to +30VDC with protection from power reversals, Case: ABS with captive mounting hardware, Accessories (Supplied): NYLON DIN-rail Mounting Adapter SECC Panel Mounting Bracket, Plug-in screw terminal wiring: Accepts AWG 1-#12 to #22 (0.5 to 2.5mm) wires, Supported baud rate (bps): 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.2K, Isolation voltage: 3000VDC, RS-422/RS-485 connector: plug-in screw terminal, Power consumption: 2.2W, Operating temperature: -25?~75?, Storage temperature: -40?~85?, Humidity: 5~95%, non-condensing