Comprehensive Product Summary – Advanio G‑M1C051‑T Ethernet/Wi‑Fi I/O Cloud Gateway Modbus Module

---

### 1. Product Overview

Product Name: Ethernet/Wi‑Fi I/O Cloud Gateway Modbus Module
Model: G‑M1C051‑T
Article Number: G‑M1C051‑T
Series: Wolf Series / G‑Series Gateway
Manufacturer: Advanio Technology Co., Ltd.
Product Type: Industrial Ethernet/Wi‑Fi I/O Cloud Gateway with Modbus communication support
Form Factor: Slim vertical mount, 47.2 mm thickness

Advanio’s G‑M1C051‑T belongs to the Wolf family of industrial remote I/O and gateway modules designed for Industry 4.0 and IoT‑enabled automation. The device functions as a Modbus‑based Ethernet/Wi‑Fi gateway for distributed I/O systems, bridging field devices to cloud or supervisory control networks. It integrates the company’s advanced I/O technology with ruggedized design for continuous operation in harsh industrial environments.

---

### 2. Key Features

- Dual Connectivity: Supports both Ethernet and Wi‑Fi interfaces for flexible network integration.
- Modbus Protocol Support: Fully compatible with Modbus RTU and Modbus/TCP for seamless communication with PLCs, PACs, and SCADA systems.
- Compact Design: Only 47.2 mm thick vertical housing, enabling high‑density installation—up to 1.5 × more modules per DIN rail compared to flat‑type competitors.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration stored in detachable EEPROM for instant restoration.
- Wide Power Input Range: Operates from +10 VDC to +60 VDC, supporting 12 V, 24 V, 36 V, 48 V industrial supplies.
- High Isolation Protection: 3,000 VDC isolation between power, communication, and I/O circuits.
- Programmable Power‑On and Safety Values: Ensures safe startup and controlled fail‑safe states during communication loss.
- Industrial‑Grade Reliability: Built‑in hardware and system watchdogs for automatic recovery from noise or communication faults.
- Ease of Installation and Maintenance:
- Rotary switches for Modbus node address setup (no PC required).
- Front‑facing terminal blocks for convenient wiring.
- LED indicators for power, system, and communication status diagnostics.
- Scalable Modular Architecture: Docking base design allows cascading multiple Wolf modules on DIN rail or wall mount.
- 5‑Year Warranty: Long‑term reliability assurance for industrial deployments.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Power Supply | 10 – 60 V DC (reverse polarity protected) |
| Power Consumption | Approx. 1.6 – 3 W depending on module configuration |
| Isolation Voltage | 3,000 V DC between power, communication, and I/O |
| Communication Interface | RS‑485 (Modbus RTU), Ethernet/Wi‑Fi (Modbus TCP) |
| Communication Speed | 1,200 bps – 115.2 kbps (serial) |
| Communication Distance | Up to 1.2 km (RS‑485) |
| Connector Type | Plug‑in terminal block, 16 – 30 AWG |
| Operating Temperature | −25 °C to +70 °C |
| Storage Temperature | −30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Mounting | DIN rail 35 mm or wall mount |
| Dimensions | Width ≈ 115 mm – 130 mm × Height ≈ 126 mm × Depth 47.2 mm |
| Weight | Approx. 0.5 – 0.7 kg (module + base) |
| Material | Industrial‑grade ABS/PC housing with reinforced insulation |
| Isolation Protection | 3 kV DC isolation between channels and system |
| Watchdog Timers | Hardware (1.6 s fixed) + software (programmable) |
| Compliance | CE, FCC Part 15 Class A, EMC (EMI/EMS) certified |
| Warranty | 5 years standard |

---

### 4. Functionality

The G‑M1C051‑T operates as a cloud‑enabled Modbus gateway that aggregates data from distributed Wolf I/O modules and transmits it via Ethernet or Wi‑Fi to supervisory or cloud systems. It supports Modbus RTU over RS‑485 for field‑level communication and Modbus/TCP for upper‑level integration.

Typical Use Cases:
- Remote data acquisition and telemetry
- Industrial process monitoring and control
- Energy management and power distribution automation
- Building and HVAC automation
- Laboratory and test automation
- Security and access control systems
- SCADA and DCS integration

Compatibility:
Fully interoperable with Advanio Wolf RS‑485 I/O modules (W‑M1Bxxx series) and third‑party Modbus devices. Supports Android/iOS access through Advanio’s Global Sales Cloud and mobile applications.

---

### 5. Components & Accessories

Included Components:
- G‑M1C051‑T module
- Detachable DIN rail base (fixed seat)
- 14‑pin signal connector
- Plastic grounding tab and isolation tab
- Plastic buckle set (2 pcs)
- Quick Start Guide

Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (G‑M1E001)
- USB ↔ RS‑485 converter (G‑M1A001)
- RS‑485 ↔ RS‑485 repeater (G‑M1F001)
- Additional Wolf I/O modules (analog, digital, relay)
- Wall‑mount brackets and grounding kits

Connectors:
- Front‑mounted plug‑in terminal blocks for I/O wiring
- RS‑485 communication port (D+, D−)
- Power input terminals (+VS, GND, FG)
- EEPROM slot for configuration memory

---

### 6. Installation & Setup

Requirements:
- Host PC with RS‑485 or Ethernet interface
- DC power supply 10 – 60 V DC
- Proper grounding (frame ground recommended)

Mounting Options:
- DIN Rail 35 mm: Modules dock vertically using connecting pin arrays; up to 10 modules per rail (≈ 30 W total).
- Wall Mount: Fixed seat secured by screws; module inserted vertically.

Grounding:
- Use aluminum DIN rail for frame grounding or connect FG terminal directly.
- Plastic isolation tabs available when electrical isolation from rail is required.

Power Wiring:
- Parallel power distribution through docking base; connect supply to one module only per rail.
- Maintain short power leads to minimize voltage drop; ripple ≤ 5 V p‑p.

Communication Setup:
- Default RS‑485 settings: 9600 bps, N, 8, 1, address 01.
- Node address range: 1 – 247 (0x01 – 0xF7) via dual rotary switches.
- Baud rate and parity configurable via Modbus registers or Advanio Utility software.

Indicators:
- Power LED: ON = power good; flashes ×3 = initialization complete.
- System LED: Flash 0.5 s = normal; steady = abnormal.
- Communication LED: Flash = active communication; steady = timeout.

Factory Reset:
Press INIT button ≥ 3 s → LEDs flash ×3 → restores defaults (9600 bps N,8,1).

EEPROM Handling:
Configuration stored in removable EEPROM; transfer to replacement module for instant recovery.

---

### 7. Performance & Capabilities

- High Channel Density: Supports Wolf I/O modules with 8, 16, or 32 channels per module.
- Sampling Rate (Analog): 2.5 samples/s per channel, 16‑bit resolution.
- Accuracy: ±0.1 % FSR typical.
- Input Impedance: Voltage 2 MΩ; Current 120 Ω.
- Protection: ±240 V overvoltage (high‑voltage models), ±35 V standard.
- Digital Input Frequency: ≤ 100 Hz counter capability with latch function.
- Relay Output Rating: 5 A @ 250 VAC / 30 VDC, 3 kV dielectric strength.
- Digital Output (Transistor): 3.5 – 30 V DC, 500 mA per channel.
- Watchdog Recovery: Hardware 1.6 s auto‑reset; software programmable 0.1 s – 25.5 s.
- Communication Capacity: Up to 247 nodes via 8 repeaters (RS‑485).
- System Topologies: Daisy‑chain, star, or hybrid (random) configurations.

Limitations:
- RS‑485 segment limited to 32 modules per repeater.
- Total cable length ≤ 1.2 km per segment.
- Power ripple must not exceed 5 V p‑p.

---

### 8. Standards & Compliance

- Electrical Safety: 3 kV isolation, reverse polarity protection.
- EMC Compliance:
- EMI/EMS tested for industrial environments.
- Certified under CE and FCC Part 15 Class A.
- Environmental: Designed for −25 °C to +70 °C operation, 95 % RH non‑condensing.
- Industry Standards:
- Modbus RTU / Modbus TCP protocol compliance.
- RS‑485 EIA/TIA‑485 standard.
- DIN EN 60715 mounting compatibility.
- Recommended Pairing: Use with CE‑certified industrial chassis for full EMC protection.

---

### 9. Additional Information

Warranty & Service:
- Duration: 5 years from original purchase.
- Coverage: Free repair or replacement for manufacturing defects.
- Exclusions: Damage from improper installation, misuse, or unauthorized modification.
- RMA Procedure:
1. Collect model number, serial number, and problem description.
2. Contact dealer for RMA number.
3. Return product with proof of purchase and completed RMA form.

Maintenance:
- No periodic calibration required under normal operation.
- EEPROM and terminal blocks are field‑replaceable.
- Modules can be hot‑swapped without system shutdown.

Software & Updates:
- Advanio Utility Software: Windows‑based configuration and test tool for all Wolf modules.
- Mobile Access: Advanio Android/iOS app for monitoring and configuration via Global Sales Cloud.
- Firmware Updates: Available through authorized distributors or Advanio technical support.

Technical Support:
- Email: service@advanio.com.tw
- Website: [https://www.advanio.com.tw](https://www.advanio.com.tw)
- Response Time: Within 2 working days.
- Information Required: Serial number, firmware version, host configuration, error details.

---

### Summary

The Advanio G‑M1C051‑T Ethernet/Wi‑Fi I/O Cloud Gateway Modbus Module is a compact, high‑reliability industrial gateway designed to connect distributed Wolf RS‑485 I/O modules to Ethernet or Wi‑Fi networks using Modbus protocols. Its modular architecture, wide power range, and robust isolation make it ideal for smart‑factory, energy, and building‑automation applications. With hot‑swap capability, programmable safety states, and comprehensive EMC compliance, the G‑M1C051‑T delivers dependable performance in demanding industrial environments while simplifying installation, maintenance, and integration into modern IoT‑based control systems.