Comprehensive Product Summary – IES-162FX-SS-SC-L Industrial Unmanaged Ethernet Switch

---

### 1. Product Overview

Product Name: Industrial Unmanaged Ethernet Switch
Model: IES-162FX-SS-SC-L
Series: IES-162FX Series
Article Number: IES-162FX-SS-SC-L
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0

The ORing IES-162FX-SS-SC-L is an industrial-grade unmanaged Ethernet switch designed for reliable data communication in harsh environments. It features six 10/100Base-T(X) copper ports and two 100Base-FX single-mode fiber ports with SC connectors, providing both short-range and long-distance network connectivity. The device supports DIN-rail and wall-mount installation, operates on a 10–30 VDC dual redundant power input, and is housed in a rugged IP-30-rated metal enclosure.

---

### 2. Key Features

- Unmanaged Industrial Ethernet Switch: Plug-and-play operation with no configuration required.
- Port Configuration: 6 × 10/100Base-T(X) RJ-45 ports (auto MDI/MDIX) and 2 × 100Base-FX single-mode fiber ports (SC connectors).
- Fiber Connectivity: Supports long-distance transmission up to 30 km over single-mode fiber at 1310 nm wavelength.
- Compact Industrial Design: Small footprint (41 × 75 × 115 mm) suitable for space-constrained control cabinets.
- Wide Operating Temperature: Reliable operation from -20°C to +60°C, with storage capability from -40°C to +85°C.
- Redundant Power Input: Dual 10–30 VDC inputs with reverse polarity and overload current protection for high reliability.
- Low Power Consumption: Typical consumption of 3.6 W.
- Rugged Construction: IP-30-rated metal housing for protection against dust and mechanical stress.
- DIN-Rail and Wall-Mount Options: Flexible installation for industrial environments.
- LED Indicators: Power, link/activity, and speed indicators for quick status monitoring.
- High Reliability: 5-year manufacturer warranty and compliance with industrial EMC and safety standards.

---

### 3. Technical Specifications

Physical Characteristics:
- Dimensions: 41 (W) × 75 (D) × 115 (H) mm (1.61 × 2.95 × 4.53 in)
- Weight: 328 g
- Enclosure: IP-30-rated metal housing
- Mounting Options: DIN-rail or wall-mount

Power:
- Input Voltage: 10–30 VDC (dual redundant inputs)
- Connector Type: 3-pin terminal block (V+, V-, Ground)
- Power Consumption: 3.6 W (typical)
- Protection: Reverse polarity and overload current protection

Environmental Conditions:
- Operating Temperature: -20°C to +60°C (-4°F to +140°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5%–95% (non-condensing)

Network Interfaces:
- Copper Ports: 6 × 10/100Base-T(X) RJ-45 ports, auto-negotiation, auto MDI/MDIX
- Fiber Ports: 2 × 100Base-FX single-mode SC connectors
- Fiber Specifications:
- Mode: Single-mode
- Core/Cladding Diameter: 9/125 µm
- Wavelength: 1310 nm
- Typical Distance: 30 km
- Max Output Optical Power: -8 dBm
- Min Output Optical Power: -15 dBm
- Max Input Optical Power (Saturation): 0 dBm
- Min Input Optical Power (Sensitivity): -34 dBm
- Link Budget: 19 dB

Performance:
- Switching Architecture: Store-and-forward
- MAC Address Table: 2048 entries
- Packet Buffer: 448 Kbits
- Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)

Cabling Requirements:
- 10Base-T: Cat. 3, 4, or 5 UTP, 100 Ω, up to 100 m
- 100Base-TX: Cat. 5 UTP, 100 Ω, up to 100 m
- Connector Type: RJ-45

---

### 4. Functionality

The IES-162FX-SS-SC-L functions as an unmanaged Ethernet switch, automatically forwarding Ethernet frames between connected devices without requiring configuration. It supports auto-negotiation for speed and duplex mode and auto MDI/MDIX for automatic crossover detection, simplifying network setup.

Use Cases and Applications:
- Industrial automation and control systems
- Transportation and traffic monitoring networks
- Power substations and utility communication systems
- Oil, gas, and mining field networks
- Factory floor Ethernet connectivity
- Remote monitoring and SCADA systems

Compatibility:
The switch is compatible with standard Ethernet devices such as PCs, PLCs, IP cameras, routers, and other switches. It supports both copper and fiber connections, enabling hybrid network topologies and long-distance communication links.

---

### 5. Components & Accessories

Package Contents:
- 1 × IES-162FX-SS-SC-L switch unit
- 1 × DIN-rail mounting kit
- 2 × Wall-mount brackets
- 1 × Quick Installation Guide (QIG)

Optional Accessories:
- External DC power supply (10–30 VDC)
- Fiber patch cables (SC single-mode)
- RJ-45 Ethernet cables (Cat. 5 or higher)

Connectors:
- Power Input: 3-pin terminal block (V+, V-, Ground)
- Ethernet Ports: 6 × RJ-45 connectors
- Fiber Ports: 2 × SC connectors

---

### 6. Installation & Setup

Installation Requirements:
- Power source: 10–30 VDC regulated supply
- Mounting surface: DIN-rail or wall panel
- Ambient temperature within -20°C to +60°C
- Adequate ventilation to prevent overheating

DIN-Rail Installation Steps:
1. Attach the DIN-rail kit to the back of the switch using the provided screws.
2. Align the switch with the DIN-rail and press until it clicks securely into place.
3. Ensure the switch is firmly seated and mechanically stable.

Wall-Mount Installation Steps:
1. Attach the two wall-mount brackets to the sides of the switch using eight screws.
2. Use the switch as a template to mark screw hole positions on the wall.
3. Insert screws into the wall and hang the switch by sliding it downward into the keyhole slots.
4. Tighten screws for stability.

Power Connection:
1. Insert the positive and negative DC wires into the V+ and V- terminals.
2. Tighten the terminal screws to secure the wires.
3. Verify correct polarity before powering on.

Network Connection:
- Connect Ethernet devices using Cat. 5 UTP cables (up to 100 m).
- Connect fiber devices using SC single-mode fiber cables (up to 30 km).
- Power on the switch; the PWR LED should illuminate green.

---

### 7. Performance & Capabilities

Switching Performance:
- Store-and-forward architecture ensures error-free data transmission.
- Supports full-duplex and half-duplex operation.
- Flow control (IEEE 802.3x) prevents packet loss under heavy load.
- 2048 MAC address table supports medium-sized industrial networks.
- 448 Kbit packet buffer optimizes throughput and minimizes latency.

Speed and Capacity:
- 10/100 Mbps per copper port
- 100 Mbps per fiber port
- Total switching capacity sufficient for simultaneous full-speed operation on all ports

Efficiency and Reliability:
- Low power consumption (3.6 W typical) reduces heat generation.
- Redundant power inputs ensure continuous operation during power source failure.
- Reverse polarity and overload protection enhance electrical safety.

Limitations:
- Unmanaged design means no VLAN, QoS, or SNMP management features.
- Fixed port configuration (non-expandable).

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3x (Flow Control)

EMC and Safety Compliance:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000-4-2 (ESD)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (EFT/Burst)
- EN61000-4-5 (Surge)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Magnetic Field)
- EN61000-4-11 (Voltage Dips/Interruptions)
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32
- Safety: EN60950-1 (Information Technology Equipment Safety)

Environmental Protection:
- IP-30-rated enclosure for protection against solid objects >2.5 mm
- Designed for industrial environments with high EMI and vibration

---

### 9. Additional Information

LED Indicators:
| LED | Color | Status | Description |
|------|--------|----------|-------------|
| PWR | Green | On | Power applied and active |
| RJ-45 LNK/ACT | Green | On | Port linked |
| | Green | Blinking | Data transmission in progress |
| RJ-45 SPEED | Amber | On | Port operating at 100 Mbps |
| | Off | Port operating at 10 Mbps |
| Fiber LNK/ACT | Green | On | Fiber link established |
| | Green | Blinking | Fiber data transmission |

Maintenance:
- Periodically inspect power and network connections for secure fit.
- Ensure adequate ventilation and avoid dust accumulation.
- Clean fiber connectors with appropriate cleaning tools to maintain signal quality.

Support and Warranty:
- Warranty: 5 years limited warranty from ORing Industrial Networking Corp.
- Technical Support:
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Email: support@oring-networking.com
- Telephone: +886-2-2218-1066
- Fax: +886-2-2218-1014

Product Identification:
- Model: IES-162FX-SS-SC-L
- Version: 1.0
- Manufacturer: ORing Industrial Networking Corp.
- Document Reference: 1907-2-29-IES162FXL-1.0

---

### Summary

The ORing IES-162FX-SS-SC-L is a robust, compact, and energy-efficient industrial unmanaged Ethernet switch engineered for mission-critical applications requiring reliable data transmission in demanding environments. With six 10/100Base-T(X) copper ports and two 100Base-FX single-mode fiber ports, it bridges local and remote network segments efficiently. Its rugged IP-30 enclosure, wide temperature tolerance, and redundant power inputs make it ideal for industrial automation, transportation, and utility networks.

Compliant with IEEE Ethernet standards and industrial EMC/safety regulations, the IES-162FX-SS-SC-L ensures dependable performance, minimal maintenance, and long service life. Backed by a 5-year warranty and ORing’s global support network, it provides a cost-effective, plug-and-play solution for expanding or upgrading industrial Ethernet infrastructures.