Comprehensive Product Summary: ORing IES-A1062GF-SS-SC Industrial Ethernet Switch

---

### 1. Product Overview

Product Name: ORing IES-A1062GF-SS-SC
Model: IES-A1062GF-SS-SC
Series: IES-A1 Series
Article Number: IES-A1062GF-SS-SC
Manufacturer: ORing Industrial Networking Corp.
Drawing Number: IES-A1 Series
Revision: v1.0
Revision Date: 2013-11-27

The ORing IES-A1062GF-SS-SC is an unmanaged industrial Ethernet switch specifically engineered for hazardous and harsh environments such as oil and gas facilities. It is part of the IES-A1 Series, a family of ruggedized, ATEX and Class I Division 2 (C1D2) certified switches designed for reliable operation in explosive or high-risk industrial zones. The switch provides 6 x 10/100Base-T(X) copper ports and 2 x 1000Base-LX single-mode fiber ports with SC connectors, offering flexible connectivity for both copper and fiber networks.

---

### 2. Key Features

- Hazardous Location Certification: Fully compliant with ATEX and UL/cUL Class I Division 2, Groups A, B, C, D standards, suitable for use in explosive gas atmospheres (Zone 2).
- Wide Operating Temperature: Designed for extreme environments with an extended operating range of -40°C to +70°C.
- Triple Redundant Power Inputs: Supports three independent DC power inputs (two via terminal block, one via power jack) for uninterrupted operation.
- High Reliability: Automatic power failover ensures continuous operation if the primary power source fails.
- Industrial-Grade Design: Rugged IP-30 rated metal enclosure for mechanical protection and electromagnetic shielding.
- Flexible Mounting: Supports both DIN-rail and wall-mount installation options.
- Unmanaged Plug-and-Play Operation: No configuration required; supports auto-negotiation and auto MDI/MDI-X for simplified deployment.
- Fiber Connectivity: Two 1000Base-LX single-mode SC fiber ports for long-distance data transmission up to 10 km.
- Surge and ESD Protection: Built-in protection against electrical surges and electrostatic discharge.
- LED Indicators: Comprehensive LED panel for power, fault, and port link/activity status.
- Compact and Lightweight: Compact form factor (52 × 106.1 × 144.3 mm) and weight of approximately 685 g.
- Long-Term Reliability: Backed by a 5-year manufacturer warranty.

---

### 3. Technical Specifications

Physical Ports:
- 6 × 10/100Base-T(X) RJ45 ports (Auto MDI/MDI-X)
- 2 × 1000Base-LX single-mode fiber ports (SC connectors)

Fiber Specifications:
- Mode: Single-mode
- Core/Cladding Diameter: 9/125 µm
- Wavelength: 1310 nm
- Typical Transmission Distance: 10 km
- Optical Power Output:
- Max: -3 dBm
- Min: -9.5 dBm
- Receiver Sensitivity:
- Max Input: -3 dBm
- Min Input (Saturation): -20 dBm
- Link Budget: 10.5 dB

Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3z (1000Base-X)
- IEEE 802.3ab (1000Base-T)
- IEEE 802.3x (Flow Control)

Performance:
- MAC Address Table: 8192 entries
- Switching Method: Store-and-Forward
- Flow Control: IEEE 802.3x compliant

Power Requirements:
- Input Voltage: 12–48 VDC (terminal block), 12–45 VDC (power jack)
- Power Inputs: Triple redundant (PWR1, PWR2 via terminal block; PWR3 via power jack)
- Power Consumption: 6 W (typical)
- Protection: Overload current and reverse polarity protection

Physical Characteristics:
- Enclosure: IP-30 rated metal housing
- Dimensions (W × D × H): 52 × 106.1 × 144.3 mm (2.05 × 4.17 × 5.67 in)
- Weight: 685 g

Environmental Conditions:
- Operating Temperature: -40°C to +70°C (-40°F to +158°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5%–95% (non-condensing)

---

### 4. Functionality

The IES-A1062GF-SS-SC functions as an unmanaged Ethernet switch, automatically detecting and forwarding Ethernet frames between connected devices. It supports auto-negotiation for speed and duplex mode, and auto MDI/MDI-X for cable type detection, eliminating the need for crossover cables.

Use Cases and Applications:
- Oil and gas refineries and offshore platforms
- Petrochemical plants and hazardous industrial zones
- Factory automation and process control systems
- Remote monitoring and SCADA networks
- Industrial camera and sensor networks
- Transportation and energy infrastructure

Compatibility:
- Compatible with standard Ethernet devices such as PLCs, HMIs, IP cameras, and industrial PCs.
- Supports both copper and fiber network topologies for flexible deployment.

Operation Principle:
The switch uses a store-and-forward mechanism to ensure data integrity, buffering incoming packets and checking for errors before forwarding them. The redundant power design ensures continuous operation even if one power source fails.

---

### 5. Components & Accessories

Included Items (Standard Package):
1. Main Unit: IES-A1062GF-SS-SC switch
2. DIN-Rail Mounting Kit (45 mm)
3. 7-Pin Terminal Block Connector (for dual DC power input)
4. Wall-Mounting Kit
5. RJ45 Dust Covers (×8)
6. Screws (M3×5) (×6)
7. Quick Installation Guide (QIG)

Optional Accessories:
- Additional DIN-rail brackets
- Fiber patch cords (SC single-mode)
- Industrial-grade DC power supplies (12–48 VDC)

Connectors:
- RJ45 Ports: Auto MDI/MDI-X, 10/100 Mbps
- Fiber Ports: SC single-mode, 1000Base-LX
- Power Terminal Block: 7-pin Dinkle 5EHDRC-07P (300 V, 15 A, 105°C, FW-1)
- Mating Connector: Dinkle 5ESDV-07P (300 V, 15 A, 105°C, FW-2)
- Wire Size: 28–12 AWG
- Torque Value: 4.5 lb-in

---

### 6. Installation & Setup

Installation Requirements:
- Must be installed in an ATEX-certified IP54 enclosure accessible only with tools.
- Suitable for pollution degree 2 environments per IEC 60664-1.
- Ensure transient disturbances do not exceed 140% of the peak rated voltage.
- Cable temperature rating must be ≥104°C.

Mounting Options:
- DIN-Rail Mounting:
1. Attach the DIN-rail clip to the rear of the switch.
2. Hook the top of the clip onto the DIN rail.
3. Press the bottom until it clicks into place.
- Wall Mounting:
1. Use the provided wall-mount brackets and screws.
2. Secure the switch to a flat, vibration-free surface.

Power Connection:
- Terminal Block Inputs (PWR1, PWR2): 12–48 VDC
- Power Jack Input (PWR3): 12–45 VDC (not for use in hazardous locations)
- Grounding: Connect frame ground to earth for safety and EMI reduction.

LED Indicators:
- Power LEDs (PWR1, PWR2, PWR3): Green (active)
- Fault LED: Amber (indicates power failure or fault condition)
- Port LEDs:
- RJ45 Ports: Green (Link/Activity), Amber (Duplex/Collision)
- Fiber Ports: Green (Link/Activity)

---

### 7. Performance & Capabilities

Switching Capacity:
- High-performance non-blocking architecture supporting full wire-speed forwarding on all ports.

Data Handling:
- Store-and-Forward switching ensures error-free packet transmission.
- Flow Control: IEEE 802.3x compliant for full-duplex operation.

Network Capacity:
- MAC Table: 8192 entries for efficient address learning and forwarding.

Power Redundancy:
- Triple power input design ensures continuous operation during power source failure.
- Automatic failover between power inputs without packet loss.

Efficiency:
- Low power consumption (6 W typical) for energy-efficient operation.
- Passive cooling design with no moving parts, ensuring silent and maintenance-free operation.

Limitations:
- Unmanaged design means no VLAN, QoS, or SNMP management features.
- Power jack input not certified for hazardous locations (use terminal block inputs in such environments).

---

### 8. Standards & Compliance

Electrical and Communication Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX, 100Base-FX)
- IEEE 802.3z (1000Base-X)
- IEEE 802.3ab (1000Base-T)
- IEEE 802.3x (Flow Control)

Safety and Hazardous Location Certifications:
- UL508 (E331061)
- UL/cUL Class I Division 2, Groups A, B, C, D
- ATEX Certificate No. 13 ATEX 1317577X
- EN 60079-0:2012
- EN 60079-15:2010

EMI/EMS Compliance:
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000-4-2 (ESD)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (EFT/Burst)
- EN61000-4-5 (Surge)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Magnetic Field)
- EN61000-4-11 (Voltage Dips/Interruptions)

Environmental and Mechanical Tests:
- Shock: IEC60068-2-27
- Vibration: IEC60068-2-6
- Free Fall: IEC60068-2-32

Ingress Protection:
- IP-30 rated enclosure

---

### 9. Additional Information

Warranty:
- 5-year limited warranty covering manufacturing defects and hardware reliability.

Support & Maintenance:
- Technical support available via ORing’s global service network.
- Firmware updates not applicable (unmanaged device).
- Preventive maintenance limited to periodic inspection of connectors and power terminals.

Manufacturer Contact Information:
- ORing Industrial Networking Corp.
- Address: 3F, No. 542-2 Zhongzheng Road, Xindian District, New Taipei City 231, Taiwan
- Tel: +886-2-2218-1066
- Fax: +886-2-2218-1014
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Email: support@oring-networking.com

Condition of Safe Use:
1. Must be installed in an ATEX-certified IP54 enclosure accessible only by tools.
2. Intended for use in areas with pollution degree 2 per IEC 60664-1.
3. Ensure transient disturbances do not exceed 140% of the rated voltage.

---

### Summary

The ORing IES-A1062GF-SS-SC is a robust, unmanaged industrial Ethernet switch designed for mission-critical applications in hazardous environments. With 6 copper ports and 2 single-mode fiber ports, it provides flexible connectivity for long-distance and local network segments. Its C1D2 and ATEX certifications, wide temperature tolerance, and triple redundant power inputs make it ideal for oil and gas, petrochemical, and heavy industrial applications where reliability and safety are paramount.

The switch’s IP-30 metal housing, surge protection, and industrial-grade components ensure long-term durability, while its plug-and-play operation simplifies deployment in complex industrial networks. Backed by a 5-year warranty, the IES-A1062GF-SS-SC delivers dependable performance and compliance with global industrial standards.