SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
IGPS-1080-24V-I
Industrial Unmanaged Switch 8*1000TX PoE PSE 24V Isolated
450,00 EUR
inkl. Umsatzsteuer 535,50 EUR
- 8x 10/100/1000Base-T(X) PoE P.S.E. Ports:
Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port.
- Dual 24–36VDC Power Inputs:
Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over.
- Isolated Power Design:
The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops.
- High Power Output:
Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
- Rugged Industrial Construction:
IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting.
- Wide Temperature Range:
Operates reliably from -40°C to +70°C, suitable for extreme industrial environments.
- Advanced Protection:
ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs.
- Efficient Data Handling:
Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table.
- LED Indicators:
Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics.
- Relay Alarm Output:
1A @ 24VDC relay output for power failure alarms, configurable via DIP switches.
- Low Power Consumption:
Typical power consumption of 7.8W (excluding PoE load).
- Compliance with IEEE Standards:
IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).
Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port.
- Dual 24–36VDC Power Inputs:
Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over.
- Isolated Power Design:
The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops.
- High Power Output:
Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
- Rugged Industrial Construction:
IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting.
- Wide Temperature Range:
Operates reliably from -40°C to +70°C, suitable for extreme industrial environments.
- Advanced Protection:
ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs.
- Efficient Data Handling:
Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table.
- LED Indicators:
Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics.
- Relay Alarm Output:
1A @ 24VDC relay output for power failure alarms, configurable via DIP switches.
- Low Power Consumption:
Typical power consumption of 7.8W (excluding PoE load).
- Compliance with IEEE Standards:
IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).
Comprehensive Product Summary – IGPS-1080-24V-I Industrial Unmanaged Gigabit PoE Switch
### 1. Product Overview
Product Name: IGPS-1080-24V-I
Model Number: IGPS-1080-24V-I
Series: IGPS Industrial Gigabit PoE Switch Series
Article Number: IGPS-1080-24V-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial Unmanaged Gigabit Ethernet Switch with Power over Ethernet (PoE) P.S.E. functionality
Tagline: *Designed for Rugged Excellence*
The ORing IGPS-1080-24V-I is an industrial-grade, unmanaged 8-port Gigabit Ethernet switch designed to deliver both data and power to connected devices via Power over Ethernet (PoE). It is engineered for high reliability in harsh industrial environments, featuring a robust IP30-rated metal enclosure, wide operating temperature range, and redundant 24–36VDC power inputs. The “-I” suffix denotes the isolated version, providing enhanced electrical isolation for improved system protection and stability.
### 2. Key Features
- 8x 10/100/1000Base-T(X) PoE P.S.E. Ports:
Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port.
- Dual 24–36VDC Power Inputs:
Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over.
- Isolated Power Design:
The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops.
- High Power Output:
Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
- Rugged Industrial Construction:
IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting.
- Wide Temperature Range:
Operates reliably from -40°C to +70°C, suitable for extreme industrial environments.
- Advanced Protection:
ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs.
- Efficient Data Handling:
Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table.
- LED Indicators:
Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics.
- Relay Alarm Output:
1A @ 24VDC relay output for power failure alarms, configurable via DIP switches.
- Low Power Consumption:
Typical power consumption of 7.8W (excluding PoE load).
- Compliance with IEEE Standards:
IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).
### 3. Technical Specifications
Physical Ports:
- 8 × 10/100/1000Base-T(X) RJ-45 ports with P.S.E. capability
- Auto MDI/MDI-X and auto-negotiation supported
Switching Technology:
- Store-and-forward architecture
- Jumbo Frame: up to 9.6 KB
- MAC Address Table: 4K entries
Power Characteristics:
- Input Voltage: Dual 24–36VDC (isolated)
- PoE Output Voltage: 52–57VDC
- Maximum PoE Power per Port: 30W (IEEE 802.3at compliant)
- Total PoE Power Budget: 120W
- Power Consumption (typical): 7.8W (without PoE load)
- Overload Current Protection: Present
- Reverse Polarity Protection: Not present
Relay Output:
- 1A @ 24VDC, used for power failure alarm
DIP Switch Functions:
- DIP 1: Enable/disable Power 1 failure alarm
- DIP 2: Enable/disable Power 2 failure alarm
LED Indicators:
- Power LEDs (Green ×2)
- Fault LED (Amber)
- Port LEDs:
- Green: 1Gbps link/activity
- Amber: 10/100Mbps link/activity
- Green (PoE): PoE power active
Enclosure:
- Material: Metal, IP30-rated
- Dimensions: 41 (W) × 94.9 (D) × 144.3 (H) mm
- Weight: 452 g
Environmental Conditions:
- Operating Temperature: -40°C to +70°C (-40°F to +158°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5%–95% non-condensing
Protection Ratings:
- ESD Protection: EN61000-4-2 (ESD)
- Surge Protection: EN61000-4-5 (Surge)
- Electrical Isolation: Provided (isolation version)
### 4. Functionality
The IGPS-1080-24V-I functions as an unmanaged Ethernet switch, automatically forwarding packets between connected devices without the need for configuration. Each of its eight Gigabit ports supports Power over Ethernet (PoE), enabling simultaneous data and power transmission over standard Cat5e/6 cables.
Typical Use Cases:
- Industrial automation and control systems
- IP surveillance networks (PoE IP cameras)
- Wireless access point deployments
- VoIP telephony systems
- Transportation and outdoor networking applications
- Energy and utility monitoring systems
Operation:
- Connect PoE-powered devices (PDs) such as cameras or access points to the RJ-45 ports.
- Connect dual DC power sources to the 6-pin terminal block for redundancy.
- The switch automatically negotiates link speed and duplex mode.
- In case of power input failure, the redundant input ensures continuous operation.
- Relay output can trigger alarms or external monitoring systems upon power failure.
Compatibility:
Fully compatible with IEEE 802.3at/af PoE devices and standard Ethernet equipment. Supports auto MDI/MDI-X for flexible cabling.
### 5. Components & Accessories
Included in Package:
- IGPS-1080-24V-I switch unit × 1
- Quick Installation Guide × 1
- 6-pin terminal block for power input × 1
- Dust covers for RJ-45 ports × 2
Optional Accessories:
- DIN-Rail mounting kit × 1
- Wall-mounting kit × 1
- DR-45-12/24: 45W @ 12/24VDC DIN-Rail power supply
- DR-75-12/24: 75W @ 12/24VDC DIN-Rail power supply
- DR-120-12/24: 120W @ 12/24VDC DIN-Rail power supply
Connectors:
- RJ-45 (8-pin) for Ethernet/PoE
- 6-pin terminal block for dual DC power input and relay output
PoE Pin Assignments:
- 10/100Base-T(X):
Pins 1, 2: TD+ / TD– with PoE +
Pins 3, 6: RD+ / RD– with PoE –
- 1000Base-T:
Pins 1, 2: BI_DA+ / BI_DA– with PoE +
Pins 3, 6: BI_DB+ / BI_DB– with PoE –
Pins 4, 5: BI_DC+ / BI_DC–
Pins 7, 8: BI_DD+ / BI_DD–
### 6. Installation & Setup
Mounting Options:
- DIN-Rail Mounting:
Attach the included DIN-rail clip to the rear panel and snap the unit onto a standard 35mm DIN rail.
- Wall Mounting:
Use the optional wall-mount kit and M3 screws to secure the unit to a flat surface.
Power Connection:
- Connect dual 24–36VDC power sources to the 6-pin terminal block.
- V1+, V1– for Power 1
- V2+, V2– for Power 2
- Relay output terminals for alarm connection
- Ensure correct polarity before powering on.
- The device automatically switches to the backup power source if the primary fails.
Ethernet Connection:
- Use Cat5e or higher cables for Gigabit connectivity.
- Auto MDI/MDI-X allows direct connection to PCs, switches, or other network devices without crossover cables.
Configuration:
- As an unmanaged switch, no software configuration is required.
- DIP switches can be used to enable or disable power failure alarms.
Safety Notes:
- Input voltage must be within 24–36VDC range.
- Ensure proper grounding via the frame ground terminal.
- Avoid reverse polarity connections.
### 7. Performance & Capabilities
Switching Performance:
- Non-blocking wire-speed forwarding on all ports
- Store-and-forward mechanism ensures error-free packet transmission
- Jumbo frame support up to 9.6 KB for high-throughput applications
PoE Performance:
- IEEE 802.3at compliant (up to 30W per port)
- Total PoE power budget: 120W
- Output voltage: 52–57VDC
- Supports both Mode A and Mode B PoE pinouts
Reliability:
- Dual redundant power inputs ensure continuous operation
- Relay alarm output provides immediate fault notification
- Industrial-grade components rated for extended temperature operation
Efficiency:
- Low power consumption (7.8W typical)
- Passive cooling design (fanless) for silent, maintenance-free operation
Limitations:
- Unmanaged design (no VLAN, QoS, or SNMP management)
- No fiber uplink ports (copper-only model)
- Reverse polarity protection not included
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX)
- IEEE 802.3ab (1000Base-T)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (Power over Ethernet, up to 30W per port)
EMI/EMS Compliance:
- FCC Part 15 Class A
- CISPR (EN55022) Class A
- EN61000-4-2 (ESD)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (EFT/Burst)
- EN61000-4-5 (Surge)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Magnetic Field)
- EN61000-4-11 (Voltage Dips/Interruptions)
Mechanical & Environmental Tests:
- Shock: IEC60068-2-27
- Free Fall: IEC60068-2-32
- Vibration: IEC60068-2-6
Safety Certification:
- EN60950-1 (Information Technology Equipment Safety)
Ingress Protection:
- IP30-rated metal enclosure
RoHS Compliance:
- Fully compliant with RoHS environmental standards
### 9. Additional Information
Warranty:
5 years limited warranty covering manufacturing defects and hardware failures under normal use.
Support & Maintenance:
- Technical support available via ORing Industrial Networking Corp.
- Email: support@oring-networking.com
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Telephone: +886-2-2218-1066
- Fax: +886-2-2218-1014
Maintenance Recommendations:
- Periodically inspect power connections and grounding.
- Keep ventilation openings clear of dust.
- Use surge protection on power lines in high-risk environments.
- Firmware updates are not applicable (unmanaged device).
Ordering Information:
- Model: IGPS-1080-24V-I
- Description: Industrial 8-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., dual 24VDC isolated power inputs.
Related Models:
- IGPS-1080-24V (non-isolated version)
- IES-1080 (non-PoE unmanaged switch)
- IES-3080 (managed version with advanced features)
### Summary
The ORing IGPS-1080-24V-I is a robust, industrial-grade unmanaged Gigabit PoE switch engineered for mission-critical applications requiring high reliability, electrical isolation, and extended environmental endurance. With eight IEEE 802.3at-compliant PoE ports, dual isolated 24–36VDC power inputs, and a rugged IP30 metal enclosure, it provides a dependable networking backbone for industrial automation, surveillance, and transportation systems. Its fanless design, redundant power architecture, and comprehensive EMC protection make it ideal for deployment in harsh environments where uptime and durability are paramount.
In essence, the IGPS-1080-24V-I delivers industrial-grade performance, electrical isolation, and PoE power delivery in a compact, maintenance-free form factor—ensuring reliable connectivity for modern industrial networks.
### 1. Product Overview
Product Name: IGPS-1080-24V-I
Model Number: IGPS-1080-24V-I
Series: IGPS Industrial Gigabit PoE Switch Series
Article Number: IGPS-1080-24V-I
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial Unmanaged Gigabit Ethernet Switch with Power over Ethernet (PoE) P.S.E. functionality
Tagline: *Designed for Rugged Excellence*
The ORing IGPS-1080-24V-I is an industrial-grade, unmanaged 8-port Gigabit Ethernet switch designed to deliver both data and power to connected devices via Power over Ethernet (PoE). It is engineered for high reliability in harsh industrial environments, featuring a robust IP30-rated metal enclosure, wide operating temperature range, and redundant 24–36VDC power inputs. The “-I” suffix denotes the isolated version, providing enhanced electrical isolation for improved system protection and stability.
### 2. Key Features
- 8x 10/100/1000Base-T(X) PoE P.S.E. Ports:
Each RJ-45 port supports Gigabit Ethernet connectivity and acts as a Power Sourcing Equipment (P.S.E.) port compliant with IEEE 802.3at, delivering up to 30W per port.
- Dual 24–36VDC Power Inputs:
Redundant power design ensures uninterrupted operation. If one power source fails, the secondary input automatically takes over.
- Isolated Power Design:
The “I” version provides galvanic isolation between power inputs and Ethernet ports, enhancing protection against electrical surges and ground loops.
- High Power Output:
Generates 52–57VDC PoE output voltage, suitable for powering IP cameras, wireless access points, VoIP phones, and other PoE-enabled devices.
- Rugged Industrial Construction:
IP30-rated metal housing with compact dimensions (41 × 94.9 × 144.3 mm) and a weight of 452 g. Designed for DIN-rail or wall mounting.
- Wide Temperature Range:
Operates reliably from -40°C to +70°C, suitable for extreme industrial environments.
- Advanced Protection:
ESD protection up to 4kV DC on Ethernet ports and surge protection up to 2000VDC on power inputs.
- Efficient Data Handling:
Store-and-forward switching architecture with support for jumbo frames up to 9.6 KB and a 4K MAC address table.
- LED Indicators:
Dual-color LEDs for link/activity and PoE status, plus power and fault indicators for quick diagnostics.
- Relay Alarm Output:
1A @ 24VDC relay output for power failure alarms, configurable via DIP switches.
- Low Power Consumption:
Typical power consumption of 7.8W (excluding PoE load).
- Compliance with IEEE Standards:
IEEE 802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T), 802.3x (Flow Control), and IEEE 802.3at (PoE).
### 3. Technical Specifications
Physical Ports:
- 8 × 10/100/1000Base-T(X) RJ-45 ports with P.S.E. capability
- Auto MDI/MDI-X and auto-negotiation supported
Switching Technology:
- Store-and-forward architecture
- Jumbo Frame: up to 9.6 KB
- MAC Address Table: 4K entries
Power Characteristics:
- Input Voltage: Dual 24–36VDC (isolated)
- PoE Output Voltage: 52–57VDC
- Maximum PoE Power per Port: 30W (IEEE 802.3at compliant)
- Total PoE Power Budget: 120W
- Power Consumption (typical): 7.8W (without PoE load)
- Overload Current Protection: Present
- Reverse Polarity Protection: Not present
Relay Output:
- 1A @ 24VDC, used for power failure alarm
DIP Switch Functions:
- DIP 1: Enable/disable Power 1 failure alarm
- DIP 2: Enable/disable Power 2 failure alarm
LED Indicators:
- Power LEDs (Green ×2)
- Fault LED (Amber)
- Port LEDs:
- Green: 1Gbps link/activity
- Amber: 10/100Mbps link/activity
- Green (PoE): PoE power active
Enclosure:
- Material: Metal, IP30-rated
- Dimensions: 41 (W) × 94.9 (D) × 144.3 (H) mm
- Weight: 452 g
Environmental Conditions:
- Operating Temperature: -40°C to +70°C (-40°F to +158°F)
- Storage Temperature: -40°C to +85°C (-40°F to +185°F)
- Operating Humidity: 5%–95% non-condensing
Protection Ratings:
- ESD Protection: EN61000-4-2 (ESD)
- Surge Protection: EN61000-4-5 (Surge)
- Electrical Isolation: Provided (isolation version)
### 4. Functionality
The IGPS-1080-24V-I functions as an unmanaged Ethernet switch, automatically forwarding packets between connected devices without the need for configuration. Each of its eight Gigabit ports supports Power over Ethernet (PoE), enabling simultaneous data and power transmission over standard Cat5e/6 cables.
Typical Use Cases:
- Industrial automation and control systems
- IP surveillance networks (PoE IP cameras)
- Wireless access point deployments
- VoIP telephony systems
- Transportation and outdoor networking applications
- Energy and utility monitoring systems
Operation:
- Connect PoE-powered devices (PDs) such as cameras or access points to the RJ-45 ports.
- Connect dual DC power sources to the 6-pin terminal block for redundancy.
- The switch automatically negotiates link speed and duplex mode.
- In case of power input failure, the redundant input ensures continuous operation.
- Relay output can trigger alarms or external monitoring systems upon power failure.
Compatibility:
Fully compatible with IEEE 802.3at/af PoE devices and standard Ethernet equipment. Supports auto MDI/MDI-X for flexible cabling.
### 5. Components & Accessories
Included in Package:
- IGPS-1080-24V-I switch unit × 1
- Quick Installation Guide × 1
- 6-pin terminal block for power input × 1
- Dust covers for RJ-45 ports × 2
Optional Accessories:
- DIN-Rail mounting kit × 1
- Wall-mounting kit × 1
- DR-45-12/24: 45W @ 12/24VDC DIN-Rail power supply
- DR-75-12/24: 75W @ 12/24VDC DIN-Rail power supply
- DR-120-12/24: 120W @ 12/24VDC DIN-Rail power supply
Connectors:
- RJ-45 (8-pin) for Ethernet/PoE
- 6-pin terminal block for dual DC power input and relay output
PoE Pin Assignments:
- 10/100Base-T(X):
Pins 1, 2: TD+ / TD– with PoE +
Pins 3, 6: RD+ / RD– with PoE –
- 1000Base-T:
Pins 1, 2: BI_DA+ / BI_DA– with PoE +
Pins 3, 6: BI_DB+ / BI_DB– with PoE –
Pins 4, 5: BI_DC+ / BI_DC–
Pins 7, 8: BI_DD+ / BI_DD–
### 6. Installation & Setup
Mounting Options:
- DIN-Rail Mounting:
Attach the included DIN-rail clip to the rear panel and snap the unit onto a standard 35mm DIN rail.
- Wall Mounting:
Use the optional wall-mount kit and M3 screws to secure the unit to a flat surface.
Power Connection:
- Connect dual 24–36VDC power sources to the 6-pin terminal block.
- V1+, V1– for Power 1
- V2+, V2– for Power 2
- Relay output terminals for alarm connection
- Ensure correct polarity before powering on.
- The device automatically switches to the backup power source if the primary fails.
Ethernet Connection:
- Use Cat5e or higher cables for Gigabit connectivity.
- Auto MDI/MDI-X allows direct connection to PCs, switches, or other network devices without crossover cables.
Configuration:
- As an unmanaged switch, no software configuration is required.
- DIP switches can be used to enable or disable power failure alarms.
Safety Notes:
- Input voltage must be within 24–36VDC range.
- Ensure proper grounding via the frame ground terminal.
- Avoid reverse polarity connections.
### 7. Performance & Capabilities
Switching Performance:
- Non-blocking wire-speed forwarding on all ports
- Store-and-forward mechanism ensures error-free packet transmission
- Jumbo frame support up to 9.6 KB for high-throughput applications
PoE Performance:
- IEEE 802.3at compliant (up to 30W per port)
- Total PoE power budget: 120W
- Output voltage: 52–57VDC
- Supports both Mode A and Mode B PoE pinouts
Reliability:
- Dual redundant power inputs ensure continuous operation
- Relay alarm output provides immediate fault notification
- Industrial-grade components rated for extended temperature operation
Efficiency:
- Low power consumption (7.8W typical)
- Passive cooling design (fanless) for silent, maintenance-free operation
Limitations:
- Unmanaged design (no VLAN, QoS, or SNMP management)
- No fiber uplink ports (copper-only model)
- Reverse polarity protection not included
### 8. Standards & Compliance
Ethernet Standards:
- IEEE 802.3 (10Base-T)
- IEEE 802.3u (100Base-TX)
- IEEE 802.3ab (1000Base-T)
- IEEE 802.3x (Flow Control)
- IEEE 802.3at (Power over Ethernet, up to 30W per port)
EMI/EMS Compliance:
- FCC Part 15 Class A
- CISPR (EN55022) Class A
- EN61000-4-2 (ESD)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (EFT/Burst)
- EN61000-4-5 (Surge)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Magnetic Field)
- EN61000-4-11 (Voltage Dips/Interruptions)
Mechanical & Environmental Tests:
- Shock: IEC60068-2-27
- Free Fall: IEC60068-2-32
- Vibration: IEC60068-2-6
Safety Certification:
- EN60950-1 (Information Technology Equipment Safety)
Ingress Protection:
- IP30-rated metal enclosure
RoHS Compliance:
- Fully compliant with RoHS environmental standards
### 9. Additional Information
Warranty:
5 years limited warranty covering manufacturing defects and hardware failures under normal use.
Support & Maintenance:
- Technical support available via ORing Industrial Networking Corp.
- Email: support@oring-networking.com
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Telephone: +886-2-2218-1066
- Fax: +886-2-2218-1014
Maintenance Recommendations:
- Periodically inspect power connections and grounding.
- Keep ventilation openings clear of dust.
- Use surge protection on power lines in high-risk environments.
- Firmware updates are not applicable (unmanaged device).
Ordering Information:
- Model: IGPS-1080-24V-I
- Description: Industrial 8-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., dual 24VDC isolated power inputs.
Related Models:
- IGPS-1080-24V (non-isolated version)
- IES-1080 (non-PoE unmanaged switch)
- IES-3080 (managed version with advanced features)
### Summary
The ORing IGPS-1080-24V-I is a robust, industrial-grade unmanaged Gigabit PoE switch engineered for mission-critical applications requiring high reliability, electrical isolation, and extended environmental endurance. With eight IEEE 802.3at-compliant PoE ports, dual isolated 24–36VDC power inputs, and a rugged IP30 metal enclosure, it provides a dependable networking backbone for industrial automation, surveillance, and transportation systems. Its fanless design, redundant power architecture, and comprehensive EMC protection make it ideal for deployment in harsh environments where uptime and durability are paramount.
In essence, the IGPS-1080-24V-I delivers industrial-grade performance, electrical isolation, and PoE power delivery in a compact, maintenance-free form factor—ensuring reliable connectivity for modern industrial networks.
-
DataSheet_IGPS-1080-24V-I.pdf
PDF Catalog
-
QIG_IGPS-1080-24V_V1.2.pdf
Manual
-
Selection_Guide.pdf
Manual
Kein Zubehör vorhanden.
