Comprehensive Product Summary – ORing IGPS‑7084GP Industrial Managed PoE Switch

---

### 1. Product Overview

Product Name: IGPS‑7084GP
Model: IGPS‑7084GP
Series: IGPS Industrial Gigabit Managed PoE Switch Series
Article Number: IGPS‑7084GP
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Website: [www.oring‑networking.com](http://www.oring-networking.com)
Contact:
4F., No.3, Lane 235, Baociao Rd., Sindian City, Taipei County 23145, Taiwan, R.O.C.
Tel: +886‑2‑2918‑3036 | Fax: +886‑2‑2918‑3084
Email: support@oring‑networking.com

The ORing IGPS‑7084GP is a rugged, fully managed industrial Gigabit Ethernet switch designed for high‑performance networking in harsh environments. It integrates Power‑over‑Ethernet (PoE) capabilities, redundant power inputs, and advanced Layer‑2 management functions, making it ideal for industrial automation, transportation, and surveillance systems requiring reliable, high‑speed data and power delivery.

---

### 2. Key Features

- Full Gigabit Performance:
8 × 10/100/1000Base‑T(X) RJ‑45 PoE PSE ports and 4 × 1000Base‑X SFP slots for fiber uplinks.
Supports auto‑negotiation and auto‑MDI/MDI‑X.

- Power‑over‑Ethernet (PoE):
IEEE 802.3at compliant, up to 30 W per port.
Total PoE power budget up to 240 W (depending on power supply).
Supports PoE power management, priority control, and LLDP‑MED power negotiation.

- Industrial‑Grade Design:
IP30 metal enclosure, fanless operation, DIN‑rail or wall‑mount installation.
Extended operating temperature range: −40 °C to +70 °C.
ESD protection 4 kV (Ethernet ports), surge protection 2 kV (power input).

- Redundant Power Inputs:
Dual 50–57 V DC inputs on a 6‑pin terminal block for power redundancy and reliability.

- High Reliability Networking:
ORing proprietary O‑Ring redundancy technology with recovery time < 20 ms over 250 nodes.
Supports Ring Coupling, Dual Homing, and standard STP/RSTP/MSTP.

- Comprehensive Management:
Managed via Web GUI, Telnet, CLI (console), SNMP v1/v2c/v3, and Windows utility.
Supports HTTPS, SSH, LLDP, RMON, Syslog, and event notification via email or SNMP trap.

- Advanced Security:
IEEE 802.1x port‑based authentication, MAC‑based port security, ACLs, and RADIUS/TACACS+ integration.
SNMPv3 encrypted authentication and access control.

- Quality of Service (QoS):
IEEE 802.1p priority queues (4 levels), DSCP/TOS mapping, traffic shaping, and rate limiting.

- VLAN and Multicast Control:
IEEE 802.1Q VLAN tagging, GVRP, Q‑in‑Q, private VLANs, and IGMP snooping for multicast optimization.

- Diagnostics and Monitoring:
Port statistics, cable diagnostics (VeriPHY), port mirroring, MAC table management, and system logging.

---

### 3. Technical Specifications

Physical Ports:
- 8 × 10/100/1000Base‑T(X) RJ‑45 PoE PSE ports
- 4 × 1000Base‑X SFP slots (LC connectors, multi‑mode or single‑mode)
- 1 × RJ‑45 console port (RS‑232, 115200 bps, 8N1)

Performance:
- Switching bandwidth: 24 Gbps
- Switching latency: < 7 µs
- MAC address table: 8192 entries
- Jumbo frame support: up to 9 KB
- IGMP multicast groups: 128 per VLAN
- Store‑and‑forward switching architecture
- 4 hardware priority queues

Power:
- Input voltage: Dual 50–57 V DC (redundant)
- Power consumption (typical): 20 W (without PD load)
- PoE output: IEEE 802.3at, up to 30 W per port
- Protection: Overload current protection, reverse polarity protection (not present), surge 2 kV DC

Mechanical:
- Enclosure: IP30‑rated metal housing
- Dimensions: 96.4 (W) × 108.5 (D) × 154 (H) mm
- Weight: approx. 1.4 kg
- Mounting: DIN‑rail (default) or wall‑mount (kit included)

Environmental:
- Operating temperature: −40 °C to +70 °C
- Storage temperature: −40 °C to +85 °C
- Operating humidity: 5 % – 95 % RH (non‑condensing)
- Cooling: Fanless convection

LED Indicators:
- Power (PWR, PWR1, PWR2) – Green
- Ring Master (R.M.) – Green
- Ring Active – Green
- Fault – Amber
- PoE status – Green
- Link/Activity (RJ‑45 and SFP) – Green

---

### 4. Functionality

Operation and Management:
The IGPS‑7084GP operates as a fully managed Layer‑2 switch with advanced redundancy and security. Configuration is accessible through:
- Web‑based GUI (HTTP/HTTPS)
- Command Line Interface (CLI) via console or Telnet/SSH
- SNMP management (v1/v2c/v3) with RMON and trap notifications
- Windows utility for discovery and configuration

Use Cases and Applications:
- Industrial automation and control systems
- IP surveillance and security networks (PoE cameras)
- Intelligent transportation systems (ITS)
- Power substations and utility monitoring
- Oil, gas, and mining communication networks
- Factory floor Ethernet backbone

Compatibility:
- IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX), 802.3ab (1000Base‑T), 802.3z (1000Base‑X)
- IEEE 802.3x flow control, 802.3ad LACP, 802.3at PoE+
- IEEE 802.1D/w/s STP/RSTP/MSTP, 802.1Q VLAN, 802.1p QoS, 802.1x authentication
- IEEE 802.1AB LLDP for topology discovery

---

### 5. Components & Accessories

Included Items:
- IGPS‑7084GP switch unit
- DIN‑rail mounting kit (pre‑installed)
- Wall‑mount bracket and screws
- Console cable (DB‑9 F to RJ‑45)
- Quick installation guide and documentation

Optional Accessories:
- SFP transceivers (multi‑mode or single‑mode, LC connector)
- External 50–57 V DC power supplies
- Industrial Ethernet cables (Cat 5e/6)

Connectors:
- 6‑pin terminal block for dual DC power input and fault relay output
- RJ‑45 connectors for Ethernet ports
- LC connectors for SFP modules
- Grounding screw for chassis earth connection

---

### 6. Installation & Setup

Mounting Options:
- DIN‑rail: Standard industrial mounting; attach via rear spring clip.
- Wall‑mount: Remove DIN‑rail clip, attach wall‑mount plate using six included screws.

Power Connection:
- Connect dual DC inputs (PWR1 and PWR2) to 50–57 V DC sources.
- Ground the chassis to prevent ESD damage.
- Fault relay output (1 A @ 24 V DC) can be wired to external alarms.

Network Cabling:
- 10/100Base‑TX: Cat 5 UTP, 100 m max
- 1000Base‑T: Cat 5e/6 UTP, 100 m max
- SFP fiber:
- Multi‑mode: 850 nm, 50/125 µm or 62.5/125 µm, up to 550 m
- Single‑mode: 1310/1550 nm, up to 10 km or more (depending on module)

Configuration:
- Default IP: 192.168.10.1
- Subnet mask: 255.255.255.0
- Gateway: 192.168.10.254
- Username/Password: admin/admin
- Access via web browser or console for initial setup.

---

### 7. Performance & Capabilities

Switching and Throughput:
- 24 Gbps non‑blocking switching fabric ensures wire‑speed forwarding on all ports.
- Store‑and‑forward architecture with 7 µs latency for 64‑byte frames.
- Supports up to 8192 MAC addresses and 256 VLANs.

PoE Power Management:
- Configurable per‑port PoE enable/disable and priority (Low/High/Critical).
- Power allocation modes: Allocated, Class‑based, or LLDP‑MED.
- Power management modes: Actual Consumption or Reserved Power.
- Dual power supply configuration (Primary/Backup) for uninterrupted PoE operation.

Redundancy and Recovery:
- ORing O‑Ring technology: < 20 ms recovery over 250 switches.
- Supports Ring Coupling and Dual Homing for complex topologies.
- STP/RSTP/MSTP for standard redundancy interoperability.

Traffic Management:
- QoS with 4 priority queues per port.
- Rate limiting and traffic shaping (500 kbps – 1 Gbps).
- Storm control for broadcast, multicast, and unknown unicast traffic.
- Port trunking and LACP for bandwidth aggregation.

Security and Access Control:
- IEEE 802.1x authentication with RADIUS/TACACS+ backend.
- Access Control Lists (ACLs) for Layer‑2/3/4 filtering.
- SNMPv3 with authentication and encryption.
- Port isolation and private VLANs for traffic segmentation.
- Syslog and fault relay for event notification.

Diagnostics and Monitoring:
- Port statistics (packets, bytes, errors, drops).
- MAC table aging and static entries.
- Cable diagnostics (VeriPHY) for cable length and fault detection.
- Port mirroring for traffic analysis.
- System log and SNMP traps for event tracking.

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3x (Flow Control)
- IEEE 802.3ad (LACP)
- IEEE 802.3at (PoE+)
- IEEE 802.1D/w/s (STP/RSTP/MSTP)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1p (QoS)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

EMC/EMI Compliance:
- FCC Part 15 Class A
- EN 55022 Class A (CISPR 22)
- EN 61000‑4‑2 (ESD)
- EN 61000‑4‑3 (RS)
- EN 61000‑4‑4 (EFT)
- EN 61000‑4‑5 (Surge)
- EN 61000‑4‑6 (CS)
- EN 61000‑4‑8 (Magnetic field)
- EN 61000‑4‑11 (Voltage dips/interruptions)

Environmental and Safety:
- IEC 60068‑2‑6 (Vibration)
- IEC 60068‑2‑27 (Shock)
- IEC 60068‑2‑32 (Free fall)
- EN 60950‑1 (Safety)
- IP30 protection rating

Industrial Protocols and Management:
- SNMP v1/v2c/v3, RMON, LLDP, DHCP Server/Client
- HTTPS/SSH secure management
- Syslog and email event notification

---

### 9. Additional Information

Warranty:
5‑year limited warranty covering defects in materials and workmanship.
Excludes damage from misuse, improper installation, or unauthorized modification.

Support and Maintenance:
- Firmware updates available via web interface or TFTP.
- Configuration backup/restore in XML format.
- Technical support via email and online resources.
- CLI and web‑based diagnostics for troubleshooting.

Maintenance Recommendations:
- Ensure proper grounding and surge protection.
- Maintain adequate ventilation for heat dissipation.
- Periodically verify firmware version and update for security patches.
- Inspect power connections and PoE loads for stability.

Firmware and Configuration Management:
- Supports firmware upgrade through web interface or CLI command:
`Firmware> Load <ip_addr> <file_name>`
- Configuration backup and restore via TFTP server:
`Config> Save <ip_server> <file_name>` / `Config> Load <ip_server> <file_name>`

System Recovery:
- Reset button:
- Press 3 s → Reboot
- Press 5 s → Restore factory defaults (IP retained)
- Fault relay output for external alarm integration.

---

### Summary

The ORing IGPS‑7084GP is a high‑performance, industrial‑grade managed Gigabit Ethernet switch engineered for mission‑critical applications requiring both data and power delivery over Ethernet. With 8 PoE+ ports and 4 SFP uplinks, it provides flexible connectivity for mixed copper and fiber networks. Its robust IP30 metal housing, wide temperature tolerance, and redundant power inputs ensure continuous operation in demanding environments.

Advanced management features—including O‑Ring redundancy, VLAN segmentation, QoS prioritization, SNMPv3 security, and comprehensive diagnostics—make the IGPS‑7084GP a versatile solution for industrial automation, transportation, and surveillance infrastructures.

Backed by ORing’s 5‑year warranty and full compliance with international industrial and safety standards, the IGPS‑7084GP delivers reliability, scalability, and secure network control for modern industrial Ethernet deployments.