Comprehensive Product Summary – IGS-9084GP-FB2-MM-LC

---

### 1. Product Overview

Product Name: Industrial Managed Ethernet Switch with Optical Bypass
Model: IGS-9084GP-FB2-MM-LC
Series: IGS-9084GP-FB2 Series
Article Number: IGS-9084GP-FB2-MM-LC
Manufacturer: ORing Industrial Networking Corp.
Version: 1.0

The ORing IGS-9084GP-FB2-MM-LC is a rugged, fully managed industrial-grade Ethernet switch designed for mission-critical networking environments. It integrates eight 10/100/1000Base‑T(X) RJ‑45 ports and four 100/1000Base‑X SFP slots with LC optical bypass capability. The model supports multi‑mode fiber connectivity and provides automatic optical bypass switching (<10 ms) to maintain uninterrupted network communication during device or power failures. It is engineered for high reliability, redundant power input, and extended temperature operation, making it ideal for industrial automation, transportation, and energy applications.

---

### 2. Key Features

- Port Configuration: 8 × 10/100/1000Base‑T(X) RJ‑45 ports (Auto MDI/MDI‑X) and 4 × 100/1000Base‑X SFP slots with LC connectors.
- Optical Bypass: Four LC optical bypass ports (multi‑mode version) ensure network continuity during device failure or power loss.
- Bypass Switching Time: < 10 ms with no throughput degradation or additional latency.
- Redundancy Protocols: Supports ORing’s proprietary O‑Ring (recovery < 30 ms over 250 nodes), Open‑Ring, O‑Chain, and standard STP/RSTP/MSTP (IEEE 802.1D/w/s) as well as MRP (IEC 62439‑2).
- Management Interfaces: Web GUI, Telnet, CLI (RS‑232 console), and ORing Open‑Vision centralized management utility.
- Security: IEEE 802.1x authentication, SNMPv3 encryption, HTTPS/SSH secure management, RADIUS/TACACS+ integration, and device binding for IP/MAC‑port security.
- QoS & Traffic Control: IEEE 802.1p priority queues (8 levels), VLAN tagging (802.1Q), DiffServ/TOS, DSCP translation, bandwidth control, and storm control.
- Diagnostics & Monitoring: Syslog, SNMP traps, SMTP email alerts, fault relay output, LED indicators, and SFP DDM monitoring.
- Power Redundancy: Dual 12–48 V DC inputs with overload and reverse polarity protection.
- Industrial Design: IP‑30 metal enclosure, DIN‑rail and wall‑mount options, fanless operation, and extended temperature range (–40 °C to +70 °C).
- Reliability: 5‑year warranty, compliance with EN60950‑1 safety and IEC 60068 mechanical standards.

---

### 3. Technical Specifications

| Category | Specification |
|---------------|------------------|
| Ethernet Ports | 8 × 10/100/1000Base‑T(X) RJ‑45 (Auto MDI/MDI‑X) |
| Fiber Ports | 4 × 100/1000Base‑X SFP (LC multi‑mode) |
| Bypass Ports | 4 × LC optical bypass (multi‑mode) |
| Switching Bandwidth | 24 Gbps |
| Switching Latency | 7 µs |
| MAC Table | 8 K entries |
| Priority Queues | 8 |
| VLANs Supported | Up to 4096 VLANs |
| Jumbo Frame | Up to 9.6 KB |
| IGMP Groups | 128 per VLAN |
| Processing Type | Store‑and‑Forward |
| Power Input | Dual 12–48 V DC (6‑pin terminal block) |
| Power Consumption | 13 W typical |
| Protection | Overload and reverse polarity protection |
| Relay Output | 1 A @ 24 V DC for fault alarm |
| Enclosure | IP‑30 metal housing |
| Dimensions (W × D × H) | 96.4 × 105.5 × 154 mm (3.8 × 4.15 × 6.06 in) |
| Weight | 1.205 kg |
| Operating Temperature | –40 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Humidity | 5 % – 95 % non‑condensing |
| Mounting | DIN‑rail / wall‑mount |
| Ingress Protection | IP‑30 |
| Safety & EMC | EN60950‑1, FCC Part 15 Class A, EN55022 Class A |
| Environmental Tests | IEC 60068‑2‑6 (Vibration), ‑27 (Shock), ‑32 (Free Fall) |
| Warranty | 5 years |

---

### 4. Functionality

Operational Concept:
The IGS‑9084GP‑FB2‑MM‑LC functions as a managed Layer 2 Gigabit Ethernet switch with integrated optical bypass circuitry. Under normal operation, traffic passes through the switch’s internal switching fabric. If the switch loses power or fails, the optical bypass relays automatically connect the corresponding fiber pairs, maintaining link continuity between upstream and downstream devices without packet loss.

Use Cases & Applications:
- Industrial automation and SCADA networks
- Intelligent transportation systems (ITS)
- Power substations and renewable energy plants
- Oil, gas, and mining communication networks
- Railway and metro backbone networks
- Remote monitoring and surveillance systems

Compatibility:
Compliant with IEEE 802.3 standards for 10/100/1000 Mbps Ethernet and interoperable with standard network devices, including routers, PLCs, HMIs, and industrial controllers. Supports both single‑mode and multi‑mode SFP transceivers (model dependent).

---

### 5. Components & Accessories

Package Contents:
- IGS‑9084GP‑FB2‑MM‑LC switch unit × 1
- DIN‑rail mounting kit × 1
- Wall‑mount kit × 1
- RS‑232 console cable (RJ‑45 to DB‑9 F) × 1
- Quick Installation Guide × 1
- Product CD (manuals and utilities) × 1

Optional Accessories:
- SFP transceivers (100 M/1 G, MM or SM, various distances)
- External DC power supplies (12–48 V DC)
- ORing Open‑Vision network management software

Connectors:
- RJ‑45 × 8 for copper Ethernet
- SFP slots × 4 for fiber modules
- LC bypass ports × 4
- 6‑pin terminal block for PWR1/PWR2 and relay
- RJ‑45 console port for RS‑232 management

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail: Attach the included DIN‑rail bracket to the rear panel and snap onto a standard 35 mm rail.
- Wall‑Mount: Secure the two wall‑mount plates using six screws and fasten the unit to a flat surface.

Power Wiring:
Connect dual DC power sources to the terminal block (V1+/V1–, V2+/V2–). Tighten clamps to prevent wire loosening. The relay contacts (1 A @ 24 V DC) can be wired to external alarms.

Grounding:
Attach the ground screw to an appropriate earth ground to minimize EMI.

Network Cabling:
- 10BASE‑T: Cat 3/4/5 UTP, 100 m max
- 100BASE‑TX: Cat 5 UTP, 100 m max
- 1000BASE‑T: Cat 5e UTP, 100 m max
- Fiber: SFP modules support 0–550 m (MM, 850 nm) or up to 20 km (SM, 1310 nm)

Initial Configuration:
1. Power on the device; verify LEDs (PWR, PWR1, PWR2 green).
2. Connect a PC via RJ‑45 Ethernet or RS‑232 console.
3. Default IP address: 192.168.10.1 / 24
4. Default credentials: admin / admin
5. Access via web browser or Open‑Vision utility for advanced setup.

Reset:
Press the reset button 2–3 s to reboot; hold 5 s to restore factory defaults.

---

### 7. Performance & Capabilities

- Switching Capacity: 24 Gbps non‑blocking
- Throughput: 17.8 Mpps @ 64‑byte packets
- Latency: 7 µs typical
- Redundancy Recovery: < 30 ms (O‑Ring) / < 10 ms bypass
- QoS: 8 hardware queues, 802.1p priority, DSCP mapping
- Bandwidth Control: Per‑port rate limiting and policing (100 kbps – 1 Gbps)
- Storm Control: Broadcast/multicast/unicast suppression (1 k–1024 k pps)
- Security: 802.1x port authentication, MAC filtering, ACLs, DoS/DDoS protection, HTTPS/SSH management
- Management Protocols: SNMP v1/v2c/v3, RMON, LLDP, Modbus TCP, DHCP Server/Client/Relay, SMTP alerts
- Diagnostics: Cable test (VeriPHY), port mirroring, MAC table monitoring, SFP DDM, system logs, ping utility
- Synchronization: IEEE 1588v2 PTP support for precise time alignment
- Limitations: Layer 2 switching only (no Layer 3 routing); SFP distance depends on module type.

---

### 8. Standards & Compliance

IEEE Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3x (Flow Control)
- IEEE 802.3ad (LACP)
- IEEE 802.1D (STP)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1p (Class of Service)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)
- IEEE 1588v2 (PTP Time Sync)

Environmental & Safety Compliance:
- EMI: FCC Part 15 Class A, EN55022 Class A
- EMS: EN61000‑4‑2 (ESD), ‑3 (RS), ‑4 (EFT), ‑5 (Surge), ‑6 (CS), ‑8, ‑11
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free Fall: IEC 60068‑2‑32
- Safety: EN60950‑1
- Ingress Protection: IP‑30 rated metal enclosure

---

### 9. Additional Information

Warranty & Support:
- Standard 5‑year limited hardware warranty.
- Technical support via email (support@oring‑networking.com) and phone (+886‑2‑2218‑1066).
- Firmware updates and Open‑Vision software available at [www.oring‑networking.com](https://www.oring-networking.com).

Maintenance:
- Fanless design requires no internal maintenance.
- Periodically inspect terminal connections and clean fiber interfaces.
- Firmware upgrade via web interface or TFTP utility.

LED Indicators Summary:
- PWR/PWR1/PWR2 (Green): Power status
- R.M (Green): Ring Master active
- Ring (Green/Blink): Ring status or break
- Fault (Amber): Power failure or port disconnection
- LNK/ACT (Green): Port link and activity
- Duplex (Amber): Full‑duplex mode

Management Access:
- Web GUI: HTTP/HTTPS browser interface
- CLI: via RS‑232 console (115200 bps, 8‑N‑1) or Telnet/SSH
- SNMP: v1/v2c/v3 for integration with NMS systems
- Open‑Vision: Windows‑based centralized management software

Alarm & Notification:
- Fault relay output (1 A @ 24 V DC)
- Syslog and SMTP email alerts for power failure, link down, or topology change
- SNMP trap notifications for event monitoring

Software Update & Configuration Backup:
- Configuration export/import (XML format)
- Firmware upgrade via web or TFTP
- Factory reset option (retains IP settings if desired)

---

### Summary

The ORing IGS‑9084GP‑FB2‑MM‑LC is a high‑performance, industrial‑grade managed Ethernet switch engineered for environments demanding continuous uptime and robust redundancy. Its combination of 8 Gigabit RJ‑45 ports, 4 SFP fiber slots, and 4 LC optical bypass ports ensures both high‑speed connectivity and fault‑tolerant operation. With advanced redundancy protocols (O‑Ring, MSTP, MRP), comprehensive management interfaces, and extensive security and QoS capabilities, it provides a reliable backbone for industrial networks. The rugged IP‑30 enclosure, dual DC power inputs, and wide temperature tolerance (–40 °C to +70 °C) make it suitable for deployment in harsh industrial conditions such as factory automation, transportation control, and energy distribution systems.

Manufacturer Contact:
ORing Industrial Networking Corp.
3F., No. 542‑2, Jhongjheng Rd., Sindian District, New Taipei City 231, Taiwan
Tel: +886‑2‑2218‑1066 Fax: +886‑2‑2218‑1014
Website: [www.oring‑networking.com](https://www.oring-networking.com)
Email: support@oring‑networking.com

---

End of Product Summary – IGS‑9084GP‑FB2‑MM‑LC