Comprehensive Product Summary – ORing IGS-P9164FX-MM-SC-HV Industrial Managed Ethernet Switch

---

### 1. Product Overview

Product Name: IGS-P9164FX-MM-SC-HV
Model: IGS-P9164FX-MM-SC-HV
Series: IGS-P9164 Series
Article Number: IGS-P9164FX-MM-SC-HV
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Email: support@oring-networking.com
- Tel: +886-2-2218-1066
- Fax: +886-2-2218-1014

Product Type: Industrial Managed Ethernet Switch
Description: 20-port managed industrial Ethernet switch featuring 16×10/100/1000Base‑T(X) RJ‑45 ports and 4×100Base‑FX multi‑mode SC fiber ports. Designed for high‑reliability applications in power substations, smart grids, and railway systems, compliant with IEC 61850‑3 and EN50155 standards.

---

### 2. Key Features

- High Port Density: 20 total ports — 16 Gigabit copper ports (10/100/1000Base‑T(X)) and 4 Fast Ethernet fiber ports (100Base‑FX, multi‑mode SC).
- Industrial‑Grade Design: Rugged IP‑30 metal enclosure, fanless operation, and extended operating temperature range from ‑40 °C to +70 °C.
- High Voltage Power Input: Dual redundant power inputs supporting 88–300 VDC or 100–240 VAC, ensuring continuous operation in critical environments.
- Smart Grid & Railway Compliance: Fully compliant with IEC 61850‑3, IEEE 1613, and EN50155 standards for electromagnetic immunity, vibration, and shock resistance.
- Advanced Network Redundancy: Supports O‑Ring, Open‑Ring, O‑Chain, MRP, and MSTP (RSTP/STP compatible) redundancy protocols with recovery times under 30 ms across up to 250 connected units.
- Comprehensive Management: Web browser, Telnet, console, SNMP (v1/v2c/v3), and ORing’s Open‑Vision centralized management utility.
- Enhanced Security: IEEE 802.1x authentication, SNMPv3 encryption, HTTPS/SSH secure access, MAC‑based port security, and RADIUS centralized password management.
- QoS and Traffic Control: IEEE 802.1p priority queuing, VLAN tagging (802.1Q), IGMP snooping, DiffServ/TOS, and bandwidth management for deterministic performance.
- Reliability Features: Dual power inputs with overload and reverse polarity protection, relay output for fault alarm, and redundant ring topology support.
- Ease of Installation: DIN‑rail and wall‑mount options with included mounting kits; console cable and power cables provided for HV models.

---

### 3. Technical Specifications

Physical Characteristics
- Enclosure: IP‑30 rated metal housing
- Dimensions (W × D × H): 115 mm × 159 mm × 154 mm (4.52 × 6.26 × 6.06 in)
- Weight: Approx. 2.205 kg (HV model)
- Mounting: DIN‑rail or wall‑mount (kits included)

Power
- Input Type: Dual redundant power inputs
- Voltage Range (HV model): 88–300 VDC / 100–240 VAC
- Power Consumption (typical): 18.5–20.7 W
- Protection: Overload current protection and reverse polarity protection
- Relay Output: 1 A @ 24 VDC, 3‑pin terminal block (Fail‑Open/Fail‑Close configurable)

Environmental
- Operating Temperature: ‑40 °C to +70 °C
- Storage Temperature: ‑40 °C to +85 °C
- Operating Humidity: 5 % – 95 % RH (non‑condensing)
- Vibration: IEC 60068‑2‑6
- Shock: IEC 60068‑2‑27
- Free Fall: IEC 60068‑2‑32

Network Performance
- Switching Bandwidth: 40 Gbps
- Switch Latency: 7 µs
- MAC Address Table: 8 K entries
- Packet Buffer: 4 Mbits
- Priority Queues: 8
- Processing Type: Store‑and‑Forward
- Maximum Frame Size: 9.6 K bytes
- VLANs Supported: Up to 256
- IGMP Multicast Groups: 128 per VLAN

Fiber Optic Ports (100Base‑FX Multi‑Mode SC)
- Connector Type: SC
- Fiber Type: Multi‑mode 62.5/125 µm or 50/125 µm
- Typical Transmission Distance: 2 km
- Wavelength: 1310 nm
- Optical Power Output: –14 dBm (max), –23.5 dBm (min)
- Receiver Sensitivity: –31 dBm
- Link Budget: 7.5 dB

Copper Ports (10/100/1000Base‑T(X))
- Connector: RJ‑45, Auto MDI/MDI‑X
- Cable Types:
- 10BASE‑T: Cat 3/4/5 UTP, 100 m max
- 100BASE‑TX: Cat 5 UTP, 100 m max
- 1000BASE‑T: Cat 5/5e UTP, 100 m max

---

### 4. Functionality

Operation and Management
The IGS‑P9164FX‑MM‑SC‑HV operates as a fully managed Layer 2 Ethernet switch. It supports configuration and monitoring through:
- Web Interface: Accessible via default IP 192.168.10.1
- Console Port: RS‑232 RJ‑45 to DB‑9 interface (115200 bps, 8‑N‑1)
- Telnet/CLI: Command‑line configuration
- SNMP: v1/v2c/v3 for remote management
- ORing Open‑Vision Utility: Centralized management and topology visualization

Use Cases and Applications
- Power Substations: IEC 61850‑3 compliance ensures electromagnetic immunity and reliability in high‑voltage environments.
- Railway Systems: EN50155 certification supports vibration, shock, and temperature extremes for onboard or trackside deployment.
- Smart Grid Networks: Redundant ring topologies and fast recovery protect mission‑critical communication.
- Industrial Automation: Reliable backbone for PLCs, HMIs, and SCADA systems.
- Transportation and Energy Infrastructure: Suitable for distributed control and monitoring networks requiring deterministic Ethernet performance.

Compatibility
- Compatible with standard Ethernet devices (PCs, servers, routers, other switches).
- Supports interoperability with third‑party SNMP management software.
- Fully compliant with IEEE 802.3 family standards for Ethernet communication.

---

### 5. Components & Accessories

Package Contents
- 1 × IGS‑P9164FX‑MM‑SC‑HV switch unit
- 1 × DIN‑rail mounting kit
- 1 × Wall‑mount kit (with screws)
- 2 × Power cables (for HV model)
- 1 × Console cable (RJ‑45 to DB‑9)
- 1 × CD (documentation and utilities)
- 1 × Quick Installation Guide (QIG)

Optional Accessories
- Fiber patch cords (SC multi‑mode)
- Industrial‑grade power supplies (for redundancy)
- ORing Open‑Vision network management software

Connectors and Interfaces
- 16 × RJ‑45 ports: 10/100/1000Base‑T(X)
- 4 × SC fiber ports: 100Base‑FX multi‑mode
- 1 × RS‑232 console port: RJ‑45 connector
- 2 × Power input terminals: 3‑pin terminal blocks (PWR1, PWR2)
- 1 × Relay output: 3‑pin terminal block (COM, Fail Open, Fail Close)

---

### 6. Installation & Setup

Mounting Options
- DIN‑Rail Installation:
1. Attach the DIN‑rail kit to the back panel using the provided screws.
2. Slide the switch onto the DIN‑rail until it clicks securely.
- Wall‑Mount Installation:
1. Attach wall‑mount brackets to both sides of the rear panel.
2. Mark and drill holes for the mounting screws.
3. Hang the switch using the keyhole slots and tighten screws for stability.

Power Wiring (HV Model)
1. Connect V+/L and V‑/N to the respective terminals on PWR1 and PWR2.
2. Tighten terminal screws to secure the wires.
3. Ensure proper grounding to minimize EMI.

Network Connection
- Use standard Ethernet cables (Cat 5e UTP) for copper ports.
- Use SC‑terminated multi‑mode fiber cables for fiber ports.
- Connect to network devices such as routers, servers, or other switches.

Initial Configuration
1. Power on the device; verify PWR, PWR1, and PWR2 LEDs illuminate.
2. Connect a PC to any RJ‑45 port.
3. Access the web interface via 192.168.10.1 (default credentials: admin/admin).
4. Configure IP address, VLANs, redundancy, and security settings as required.

LED Indicators
- PWR (Green): Power on
- PWR1/PWR2 (Green): Individual power module active
- R.M (Green): Ring Master mode active
- Ring (Green/Blinking): Ring mode active / broken
- Fault (Amber): System fault detected
- LNK/ACT (Green/Amber): Link/activity and speed indication per port

---

### 7. Performance & Capabilities

Switching Performance
- Throughput: 40 Gbps switching capacity ensures non‑blocking performance.
- Latency: 7 µs for high‑speed packet forwarding.
- Frame Handling: Store‑and‑forward architecture with jumbo frame support up to 9.6 KB.

Redundancy and Recovery
- O‑Ring Technology: < 30 ms recovery time for up to 250 nodes.
- MSTP/RSTP/STP: IEEE 802.1D/w/s compliant spanning tree protocols.
- O‑Chain and MRP: Flexible ring and chain topologies for fault‑tolerant networking.

Traffic Management
- QoS: IEEE 802.1p with 8 priority queues.
- VLAN: IEEE 802.1Q tagging and GVRP support.
- IGMP Snooping: Efficient multicast traffic control.
- Bandwidth Control: Per‑port rate limiting and IP‑based bandwidth management.
- DiffServ/TOS: Layer 3 traffic prioritization.

Security and Reliability
- Port Security: Enable/disable individual ports, MAC‑based filtering.
- Authentication: IEEE 802.1x, RADIUS integration.
- Encryption: SNMPv3, HTTPS, SSH for secure management.
- DoS/DDoS Prevention: Built‑in protection mechanisms.
- Device Binding: Prevents unauthorized device access.

Limitations
- Layer 2 managed switch (no Layer 3 routing).
- Fiber ports limited to 100 Mbps (Fast Ethernet).
- Maximum VLANs: 256; IGMP groups: 128 per VLAN.

---

### 8. Standards & Compliance

Ethernet Standards
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3ad (LACP)
- IEEE 802.3x (Flow Control)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

Industrial and Environmental Standards
- IEC 61850‑3 / IEEE 1613: Power automation and substation communication.
- EN50155: Railway applications (rolling stock).
- EN50121‑3‑2, EN55011, EN55012‑4: Railway EMC compliance.
- EN60950‑1: Electrical safety.
- IEC 60068‑2‑6/‑27/‑32: Vibration, shock, and free‑fall resistance.

EMI/EMS Compliance
- EMI: FCC Part 15 Class A, CISPR (EN55022) Class A
- EMS:
- EN61000‑4‑2 (ESD)
- EN61000‑4‑3 (RS)
- EN61000‑4‑4 (EFT)
- EN61000‑4‑5 (Surge)
- EN61000‑4‑6 (CS)
- EN61000‑4‑8 (Magnetic Field)
- EN61000‑4‑11 (Dip/Interruption)

Certifications: CE, FCC, EN50155, IEC 61850‑3, IEEE 1613

---

### 9. Additional Information

Warranty: 5 Years (standard manufacturer warranty)
Support: Technical support via ORing website and email.
Maintenance:
- Periodic inspection of power and network connections recommended.
- Firmware updates available through ORing’s support portal.
- Configuration backup and restore supported via web interface.

Software Updates:
- Firmware and management utility updates provided by ORing Industrial Networking Corp.
- Open‑Vision software supports topology discovery, event logging, and remote firmware upgrade.

Safety Considerations:
- Ensure adequate ventilation and ambient temperature within specified limits.
- Avoid mechanical stress or uneven loading during installation.
- Maintain proper grounding to reduce EMI effects.
- Verify circuit protection and overcurrent ratings before connecting to power supply.

Reset and Recovery:
- Soft Reboot: Press reset button for 5 seconds.
- Factory Reset: Hold reset button > 5 seconds to restore default configuration.

Operational Notes:
- Designed for continuous 24/7 operation in harsh industrial environments.
- Supports redundant power and network paths for maximum uptime.
- Recommended for mission‑critical automation, transportation, and energy systems.

---

### Summary

The ORing IGS‑P9164FX‑MM‑SC‑HV is a robust, high‑performance 20‑port managed industrial Ethernet switch engineered for demanding environments such as power substations, railway systems, and smart grids. With 16 Gigabit copper ports and 4 Fast Ethernet multi‑mode fiber ports, it provides flexible connectivity for mixed copper‑fiber networks.

Its compliance with IEC 61850‑3, IEEE 1613, and EN50155 ensures resilience against electromagnetic interference, vibration, and temperature extremes. The switch’s dual high‑voltage power inputs, redundant ring protocols, and fast recovery (< 30 ms) make it ideal for mission‑critical applications requiring uninterrupted communication.

Comprehensive management options, advanced security features, and industrial‑grade reliability position the IGS‑P9164FX‑MM‑SC‑HV as a cornerstone component for modern industrial Ethernet infrastructures.

---

End of Product Summary – ORing IGS‑P9164FX‑MM‑SC‑HV