Comprehensive Product Summary – ORing IGS-P9164GF-MM-SC-HV Industrial Managed Ethernet Switch

---

### 1. Product Overview

Product Name: IGS-P9164GF-MM-SC-HV
Model: IGS-P9164GF-MM-SC-HV
Series: IGS-P9164 Series
Article Number: IGS-P9164GF-MM-SC-HV
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Tel: +886-2-2218-1066
- Fax: +886-2-2218-1014
- Email: support@oring-networking.com

Product Type: Industrial Managed Ethernet Switch
Description: 20-port managed industrial Ethernet switch featuring 16×10/100/1000Base‑T(X) RJ‑45 ports and 4×1000Base‑FX multimode SC fiber ports, designed for high‑reliability applications in power substations, smart grids, and railway systems.

---

### 2. Key Features

- High Port Density: 20 total ports – 16 Gigabit copper (RJ‑45) and 4 Gigabit fiber (SC multimode).
- Industrial Grade Design: Fully compliant with IEC 61850‑3 and IEEE 1613 for power automation and EN50155 for railway applications.
- Wide Operating Temperature: ‑40°C to +70°C continuous operation, suitable for harsh environments.
- Dual Redundant Power Inputs: Supports 88–300 VDC and 100–240 VAC (HV model) for uninterrupted operation.
- Network Redundancy: Supports O‑Ring, Open‑Ring, O‑Chain, MRP, and MSTP (RSTP/STP compatible) redundancy protocols with recovery time < 30 ms over 250 units.
- Advanced Management: Web browser, Telnet, console, SNMP, and ORing’s Open‑Vision centralized management utility.
- Enhanced Security: 802.1x authentication, SNMPv3 encryption, HTTPS/SSH, RADIUS, and MAC‑based port security.
- Comprehensive QoS: IEEE 802.1p priority, DiffServ, and application‑based QoS management for deterministic traffic control.
- Rugged Enclosure: IP‑30 rated metal housing with DIN‑rail and wall‑mount options.
- High Reliability: Redundant power, relay alarm output, and fault LED indicators for system health monitoring.
- Long‑Distance Fiber Connectivity: 4×1000Base‑FX multimode SC ports supporting up to 2 km transmission distance.

---

### 3. Technical Specifications

Physical Characteristics:
- Dimensions (W×D×H): 115 × 159 × 154 mm (4.52 × 6.26 × 6.06 in)
- Weight: 2,216 g (HV model)
- Enclosure: IP‑30 rated metal housing
- Mounting: DIN‑rail and wall‑mount compatible

Power:
- Input Type: Dual redundant power inputs
- HV Model Input Range: 85–264 VAC / 88–373 VDC
- Power Consumption (Typical): 20.7 W (HV)
- Protection: Overload current protection and reverse polarity protection
- Relay Output: 1 A at 24 VDC (3‑pin terminal block)

Environmental:
- Operating Temperature: ‑40 °C to +75 °C
- Storage Temperature: ‑40 °C to +85 °C
- Operating Humidity: 5 %–95 % (non‑condensing)
- Vibration: IEC 60068‑2‑6
- Shock: IEC 60068‑2‑27
- Free Fall: IEC 60068‑2‑32

Fiber Optics (1000Base‑FX MM SC):
- Connector Type: SC
- Fiber Type: Multimode 50/125 µm or 62.5/125 µm
- Wavelength: 1310 nm
- Typical Distance: 2 km
- Optical Power (Tx): Max –3 dBm, Min –14 dBm
- Optical Sensitivity (Rx): Min –31 dBm
- Link Budget: 10.5 dB

Copper Ports (10/100/1000Base‑T(X)):
- Connector: RJ‑45, Auto MDI/MDIX
- Cable: Cat 5/5e UTP, 100 m max
- Standards: IEEE 802.3, 802.3u, 802.3ab

Switching Performance:
- Switching Bandwidth: 40 Gbps
- Switch Latency: 7 µs
- MAC Address Table: 8 K entries
- Packet Buffer: 4 Mbits
- Priority Queues: 8
- Processing Type: Store‑and‑Forward
- Max Frame Size: 9.6 K bytes (Jumbo Frame)

---

### 4. Functionality

Operation:
The IGS‑P9164GF‑MM‑SC‑HV functions as a fully managed Layer 2 industrial Ethernet switch. It provides high‑speed data transmission between copper and fiber interfaces, enabling flexible network topologies in industrial automation, transportation, and energy systems.

Management Interfaces:
- Web Browser (HTTP/HTTPS)
- Telnet / Console (RS‑232, RJ‑45 to DB‑9 cable)
- SNMP v1/v2c/v3
- ORing Open‑Vision Utility

Default Network Settings:
- IP Address: 192.168.10.1
- Username/Password: admin / admin

Use Cases:
- Power substations and smart grid communication (IEC 61850‑3 compliant)
- Railway and rolling stock Ethernet backbone (EN50155 certified)
- Industrial automation and process control networks
- Redundant ring topologies for mission‑critical systems
- Long‑distance fiber uplinks between distributed control nodes

Compatibility:
- Compatible with standard Ethernet devices (PCs, PLCs, routers, other switches)
- Supports CAT 3–5e UTP cables for copper links and multimode fiber for optical links

---

### 5. Components & Accessories

Package Contents:
1. IGS‑P9164GF‑MM‑SC‑HV switch unit × 1
2. DIN‑rail mounting kit × 1
3. Wall‑mount kit × 1
4. Console cable (RJ‑45 to DB‑9) × 1
5. Power cables (for HV model) × 2
6. Quick Installation Guide (QIG) × 1
7. Product CD (documentation and utilities) × 1

Optional Accessories:
- Fiber patch cords (SC multimode)
- Industrial power supply units (88–300 VDC / 100–240 VAC)
- ORing Open‑Vision network management software

Connectors:
- RJ‑45 Ports: 16× 10/100/1000Base‑T(X)
- SC Ports: 4× 1000Base‑FX multimode
- Console Port: RS‑232 (RJ‑45)
- Power Inputs: Dual 3‑pin terminal blocks (V+/L, V‑/N)
- Relay Output: 3‑pin terminal block (COM, Fail Open, Fail Close)

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail kit to the back panel.
2. Slide the switch onto the DIN‑rail until it clicks securely.
- Wall‑Mount Installation:
1. Attach wall‑mount brackets to both sides of the rear panel.
2. Mark and drill mounting holes.
3. Insert screws through keyhole slots and tighten.

Power Wiring (HV Model):
1. Insert positive and negative wires into V+/L and V‑/N terminals.
2. Tighten wire‑clamp screws to secure connections.
3. Connect both PWR1 and PWR2 for redundancy.

Grounding:
Connect the ground screw to a proper earth ground to minimize EMI.

Network Connection:
- Use CAT 5/5e UTP cables for copper ports (max 100 m).
- Use multimode fiber (50/125 µm or 62.5/125 µm) for SC ports (max 2 km).

Configuration:
1. Power on the device; verify PWR LEDs illuminate.
2. Connect a PC to any RJ‑45 port.
3. Access the web interface via 192.168.10.1.
4. Log in with default credentials (admin/admin).
5. Configure VLANs, redundancy, QoS, and security as required.

LED Indicators:
- PWR (Green): Power on
- PWR1/PWR2 (Green): Individual power module active
- R.M (Green): Ring Master mode active
- Ring (Green/Blinking): Ring mode active / broken
- Fault (Amber): System fault detected
- LNK/ACT (Green/Amber): Link/activity and speed indication per port

---

### 7. Performance & Capabilities

Switching Capacity: 40 Gbps non‑blocking throughput
Latency: 7 µs typical
VLAN Support: Up to 256 VLANs (IEEE 802.1Q)
Multicast: IGMP snooping, 128 multicast groups per VLAN
QoS: 8 hardware priority queues, IEEE 802.1p, DiffServ, TOS
Redundancy: O‑Ring recovery < 30 ms over 250 switches
Security:
- 802.1x port‑based authentication
- SNMPv3 encrypted management
- HTTPS/SSH secure access
- RADIUS centralized authentication
- MAC‑based port security
- Device binding and DoS/DDoS prevention

Management Features:
- Port configuration, monitoring, and statistics
- VLAN tagging and GVRP
- DHCP server/client
- Modbus TCP and SMTP client support
- Port mirroring and rate limiting
- Firmware upgrade via web or console

Limitations:
- Layer 2 switching only (no Layer 3 routing)
- Fiber distance limited to 2 km (multimode)

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3ad (LACP)
- IEEE 802.3x (Flow Control)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

Industrial & Environmental Standards:
- IEC 61850‑3 / IEEE 1613: Power automation and substation communication
- EN50155: Railway applications (EN50121‑3‑2, EN55011, EN55012‑4)
- EN60950‑1: Safety standard
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS: EN61000‑4‑2/3/4/5/6/8/11 (ESD, RS, EFT, Surge, CS, Power Frequency, Voltage Dips)
- Vibration/Shock/Free Fall: IEC 60068‑2‑6/‑27/‑32

Certifications:
- CE, FCC, EN50155, IEC 61850‑3, IEEE 1613

---

### 9. Additional Information

Warranty: 5 years limited manufacturer warranty
Support: Technical assistance via ORing support channels (email, phone, website)
Maintenance:
- Periodic inspection of power and grounding connections
- Firmware updates available through ORing’s support portal
- Configuration backup and restore via web interface
Software Updates:
- Firmware and Open‑Vision management utility updates downloadable from ORing website

Safety Notes:
- Ensure adequate ventilation and ambient temperature below 70 °C.
- Avoid mechanical stress or uneven loading during installation.
- Maintain proper grounding to reduce EMI.
- Use only qualified personnel for wiring and configuration.

---

### Summary

The ORing IGS‑P9164GF‑MM‑SC‑HV is a high‑performance, industrial‑grade managed Ethernet switch engineered for mission‑critical applications in power automation, transportation, and heavy industry. With 16 Gigabit copper ports and 4 multimode fiber ports, it delivers robust connectivity and redundancy in compliance with IEC 61850‑3, IEEE 1613, and EN50155 standards. Its dual high‑voltage power inputs, extended temperature tolerance, and IP‑30 metal enclosure ensure reliable operation in demanding environments.

Comprehensive Layer 2 management, advanced security, and rapid redundancy recovery make it ideal for smart grid, substation, and rolling stock networks requiring deterministic performance and high availability. Backed by a 5‑year warranty and ORing’s industrial networking expertise, the IGS‑P9164GF‑MM‑SC‑HV provides a dependable foundation for resilient, secure, and scalable industrial Ethernet infrastructures.