Comprehensive Product Summary – ORing IGS-P9164GF-SS-SC-HV Industrial Managed Ethernet Switch

---

### 1. Product Overview

Product Name: IGS-P9164GF-SS-SC-HV
Model: IGS-P9164GF-SS-SC-HV
Series: IGS-P9164 Series (includes IGS-P9164GF, IGS-P9164FX, IGS-P9164GC variants)
Article Number: IGS-P9164GF-SS-SC-HV
Manufacturer: ORing Industrial Networking Corp.
Manufacturer Contact:
- Website: [www.oring-networking.com](http://www.oring-networking.com)
- Email: support@oring-networking.com
- Tel: +886-2-2218-1066
- Fax: +886-2-2218-1014

Product Type: Industrial Managed Ethernet Switch
Description: 20-Port Managed Industrial Gigabit Ethernet Switch with 16×10/100/1000Base‑T(X) RJ‑45 ports and 4×1000Base‑FX single‑mode SC fiber ports. Designed for Smart Grid and railway applications, compliant with IEC 61850‑3 and EN50155 standards.
Power Input: Dual redundant high‑voltage input 88–300 VDC / 100–240 VAC
Operating Temperature: −40 °C to +70 °C
Enclosure: IP‑30 rated metal housing

---

### 2. Key Features

- High‑Performance Industrial Networking:
20‑port managed Gigabit switch with 16 copper and 4 fiber ports, supporting 10/100/1000 Mbps auto‑negotiation and auto‑MDI/MDI‑X.
- Rugged Design for Harsh Environments:
Fully compliant with IEC 61850‑3 and IEEE 1613 for power substation automation, and EN50155 for railway applications.
- Wide Power Range:
Dual redundant high‑voltage inputs (88–300 VDC / 100–240 VAC) with overload and reverse polarity protection.
- Extended Temperature Operation:
Reliable performance from −40 °C to +70 °C (storage −40 °C to +85 °C).
- Advanced Redundancy Protocols:
Supports O‑Ring, Open‑Ring, O‑Chain, MRP, and MSTP (RSTP/STP compatible) with recovery time < 30 ms over 250 units.
- Comprehensive Management:
Managed via Web GUI, Telnet, Console (RS‑232), SNMP, or ORing’s Open‑Vision utility.
- Enhanced Security:
Includes 802.1x authentication, SNMPv3 encryption, HTTPS/SSH, MAC‑based port security, and RADIUS centralized management.
- QoS and Traffic Control:
8 priority queues, 802.1p QoS, VLAN tagging (802.1Q), GVRP, IGMP snooping, and IP‑based bandwidth management.
- High Reliability:
Redundant power design, relay output for fault alarm, and robust EMI/EMS immunity.
- Compact Industrial Form Factor:
DIN‑rail or wall‑mount installation, IP‑30 enclosure, fanless design for silent operation.

---

### 3. Technical Specifications

Physical Characteristics:
- Dimensions (W × D × H): 115 × 159 × 154 mm (4.52 × 6.26 × 6.06 in)
- Weight: 2,216 g (HV model)
- Enclosure: IP‑30 rated metal housing
- Mounting: DIN‑rail or wall‑mount (kits included)

Power:
- Input Type: Dual redundant high‑voltage inputs
- Input Range: 88–300 VDC / 100–240 VAC
- Power Consumption (typical): 18.5–20.7 W (model dependent)
- Protection: Overload current protection, reverse polarity protection

Environmental:
- Operating Temperature: −40 °C to +70 °C
- Storage Temperature: −40 °C to +85 °C
- Operating Humidity: 5 %–95 % (non‑condensing)
- Vibration: IEC 60068‑2‑6
- Shock: IEC 60068‑2‑27
- Free Fall: IEC 60068‑2‑32

Network Interfaces:
- Copper Ports: 16 × 10/100/1000Base‑T(X), RJ‑45, Auto MDI/MDI‑X
- Fiber Ports: 4 × 1000Base‑FX, single‑mode SC connectors
- Console Port: RS‑232 (RJ‑45 to DB‑9 cable included)
- Relay Output: 1 A at 24 VDC, 3‑pin terminal block (Fail‑Open/Fail‑Close selectable)

Performance:
- Switching Bandwidth: 40 Gbps
- Switching Latency: 7 µs
- MAC Address Table: 8 K entries
- Packet Buffer: 4 Mbits
- Jumbo Frame Support: Up to 9.6 K bytes
- VLANs Supported: Up to 256
- IGMP Multicast Groups: 128 per VLAN

Optical Characteristics (1000Base‑FX SC):
- Fiber Type: Single‑mode (9/125 µm)
- Typical Distance: 10 km
- Wavelength: 1310 nm
- Optical Power Output: −3 dBm (max), −9.5 dBm (min)
- Receiver Sensitivity: −20 dBm
- Link Budget: 10.5 dB

---

### 4. Functionality

Operation Overview:
The IGS‑P9164GF‑SS‑SC‑HV functions as a fully managed Layer 2 industrial Ethernet switch, providing high‑speed data transmission and network redundancy for mission‑critical applications. It supports store‑and‑forward packet processing and advanced traffic management features to ensure deterministic communication in industrial networks.

Use Cases and Applications:
- Power Substations: IEC 61850‑3 compliance ensures electromagnetic and environmental robustness for substation automation systems.
- Railway and Rolling Stock: EN50155 certification supports vibration, shock, and temperature extremes typical in train environments.
- Smart Grid and Utility Networks: Reliable backbone for SCADA, protection relays, and distributed control systems.
- Industrial Automation: Integration with PLCs, HMIs, and control servers in harsh factory environments.
- Transportation and Infrastructure: Suitable for traffic control, surveillance, and signaling systems.

Compatibility:
- Compatible with standard Ethernet devices (PCs, servers, routers, other switches).
- Supports CAT 3/4/5/5e UTP cables up to 100 m for copper ports.
- Fiber ports compatible with standard SC single‑mode connectors.
- Management via standard SNMP, web browser, or ORing Open‑Vision software.

---

### 5. Components & Accessories

Package Contents:
1. IGS‑P9164GF‑SS‑SC‑HV switch unit × 1
2. DIN‑rail mounting kit × 1
3. Wall‑mount kit × 1
4. Console cable (RJ‑45 to DB‑9) × 1
5. Power cables (for HV model) × 2
6. Quick Installation Guide (QIG) × 1
7. Product CD (manuals and utilities) × 1

Optional Accessories:
- Fiber patch cords (SC single‑mode)
- Redundant power supply modules
- ORing Open‑Vision network management software

Connectors:
- Power: Dual 3‑pin terminal blocks (V+/L, V−/N)
- Relay: 3‑pin terminal block (COM, Fail‑Open, Fail‑Close)
- Console: RJ‑45 serial port
- Ethernet: RJ‑45 (copper) and SC (fiber)

---

### 6. Installation & Setup

Mounting Options:
- DIN‑Rail Installation:
1. Attach the DIN‑rail bracket to the back panel using screws.
2. Slide the switch onto the DIN‑rail until it clicks securely.
- Wall‑Mount Installation:
1. Attach wall‑mount brackets to both sides of the rear panel.
2. Mark and drill holes according to bracket spacing.
3. Insert screws through keyhole slots and tighten.

Power Wiring:
1. Insert positive and negative wires into V+/L and V−/N terminals for PWR1 and PWR2.
2. Tighten terminal screws to secure connections.
3. Ensure proper grounding to minimize EMI.

Network Connection:
- Use CAT 5/5e UTP cables for 1000Base‑T connections (max 100 m).
- Use single‑mode fiber (9/125 µm) for 1000Base‑FX ports (up to 10 km).

Configuration:
- Default IP address: 192.168.10.1
- Default username/password: admin / admin
- Access via web browser (Internet Explorer 6.0 or later), Telnet, or console port.
- Supports SNMP management and ORing Open‑Vision utility for centralized monitoring.

LED Indicators:
- PWR, PWR1, PWR2 (Green): Power status
- R.M (Green): Ring Master mode active
- Ring (Green/Blinking): Ring mode active / broken
- Fault (Amber): Fault detected
- LNK/ACT (Green/Amber): Link/activity and speed indication for each port

---

### 7. Performance & Capabilities

Switching Performance:
- Bandwidth: 40 Gbps non‑blocking
- Latency: 7 µs
- Packet Buffer: 4 Mbits
- MAC Table: 8 K entries
- Jumbo Frame: 9.6 K bytes

Network Redundancy:
- O‑Ring, Open‑Ring, O‑Chain, MRP, MSTP (RSTP/STP compatible)
- Recovery time < 30 ms over 250 connected units

Traffic Management:
- 8 priority queues for QoS
- 802.1p Class of Service (CoS)
- VLAN tagging (802.1Q) and GVRP
- IGMP snooping for multicast control
- Port rate limiting and IP‑based bandwidth management

Security Features:
- 802.1x port‑based authentication
- SNMPv3 encrypted management
- HTTPS and SSH secure access
- MAC‑based port security and device binding
- RADIUS centralized authentication
- DoS/DDoS auto‑prevention

Reliability:
- Dual redundant power inputs
- Relay output for fault alarm
- Fanless design for high MTBF
- Fast recovery and self‑healing network topology

Limitations:
- Layer 2 switching only (no Layer 3 routing)
- Fiber distance limited to 10 km (single‑mode SC)

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3z (1000Base‑X)
- IEEE 802.3ab (1000Base‑T)
- IEEE 802.3ad (Link Aggregation Control Protocol)
- IEEE 802.3x (Flow Control)
- IEEE 802.1p (Class of Service)
- IEEE 802.1Q (VLAN Tagging)
- IEEE 802.1w (RSTP)
- IEEE 802.1s (MSTP)
- IEEE 802.1x (Authentication)
- IEEE 802.1AB (LLDP)

Industrial and Environmental Standards:
- Power Automation: IEC 61850‑3, IEEE 1613
- Railway: EN50155 (EN50121‑3‑2, EN55011, EN55012‑4)
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS:
- EN61000‑4‑2 (ESD)
- EN61000‑4‑3 (RS)
- EN61000‑4‑4 (EFT)
- EN61000‑4‑5 (Surge)
- EN61000‑4‑6 (CS)
- EN61000‑4‑8 (Magnetic Field)
- EN61000‑4‑11 (Dip/Interruption)
- Safety: EN60950‑1
- Vibration/Shock/Free Fall: IEC 60068‑2‑6 / ‑27 / ‑32

Certifications:
- CE, FCC, EN50155, IEC 61850‑3, IEEE 1613

---

### 9. Additional Information

Warranty: 5 years limited manufacturer warranty

Support & Maintenance:
- Technical support via ORing Industrial Networking Corp.
- Firmware updates and management utilities available on manufacturer’s website.
- Open‑Vision software for centralized monitoring, configuration, and diagnostics.

Maintenance Recommendations:
- Ensure adequate ventilation and ambient temperature within specified range.
- Regularly inspect power and network connections for secure fit.
- Keep fiber connectors clean to maintain optimal optical performance.
- Use grounding and shielding to minimize EMI interference.

Reset & Recovery:
- Reboot: Press reset button for 5 seconds.
- Factory Reset: Press and hold reset for 5 seconds while powered on.

Safety Notes:
- Avoid circuit overloading; verify supply circuit ratings.
- Maintain proper airflow and mechanical stability during installation.
- Ensure grounding before connecting power or network cables.

---

### Summary

The ORing IGS‑P9164GF‑SS‑SC‑HV is a high‑reliability, industrial‑grade managed Ethernet switch engineered for mission‑critical applications in power substations, transportation, and heavy industrial environments. With 20 Gigabit ports (16 RJ‑45 and 4 SC single‑mode fiber), dual redundant high‑voltage power inputs, and compliance with IEC 61850‑3 and EN50155 standards, it delivers robust performance under extreme conditions.

Its advanced redundancy protocols, comprehensive management interfaces, and strong security features make it ideal for Smart Grid, railway, and automation networks requiring continuous uptime and deterministic communication. The IP‑30 metal enclosure, wide temperature tolerance, and 5‑year warranty further reinforce its suitability for demanding industrial deployments.