NDP-243
SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
ND-6063
NuDAM 8 Chan Relay Form A Output Module
163,00 EUR
inkl. Umsatzsteuer 193,97 EUR
- Eight Form A Relay Outputs:
Each channel provides an independent normally‑open contact for switching AC or DC loads.
- Relay Ratings:
– 0.5 A @ 125 VAC (max)
– 1 A @ 30 VDC (max)
- RS‑485 Communication Interface:
Two‑wire, half‑duplex differential bus supporting up to 115.2 kbps and 4000 ft (1200 m) transmission distance.
- Multi‑Drop Networking:
Up to 128 modules per bus segment, 256 modules total with repeaters.
- ASCII Command/Response Protocol:
Simple printable‑character protocol for configuration and control, compatible with most programming languages.
- Programmable Host Watchdog Timer:
Ensures safe output state if host communication fails; timeout adjustable from 100 ms to 25.5 s.
- Internal Hardware Watchdog:
150 ms device‑level supervisor resets the module automatically on internal fault.
- Optical Isolation:
2500 Vrms (min) isolation between logic and field circuits for industrial safety.
- High Noise Immunity:
EMI‑shielded ABS enclosure with internal conductive coating and conformal‑coated PCB for harsh environments.
- DIN‑Rail or Panel Mounting:
Compact, rugged housing with screw‑terminal connectors for quick installation.
- Software‑Configurable Address and Baud Rate:
Default ID = 01 (Hex), 9600 bps; configurable via RS‑485 commands or NuDAM Administration Utility.
Each channel provides an independent normally‑open contact for switching AC or DC loads.
- Relay Ratings:
– 0.5 A @ 125 VAC (max)
– 1 A @ 30 VDC (max)
- RS‑485 Communication Interface:
Two‑wire, half‑duplex differential bus supporting up to 115.2 kbps and 4000 ft (1200 m) transmission distance.
- Multi‑Drop Networking:
Up to 128 modules per bus segment, 256 modules total with repeaters.
- ASCII Command/Response Protocol:
Simple printable‑character protocol for configuration and control, compatible with most programming languages.
- Programmable Host Watchdog Timer:
Ensures safe output state if host communication fails; timeout adjustable from 100 ms to 25.5 s.
- Internal Hardware Watchdog:
150 ms device‑level supervisor resets the module automatically on internal fault.
- Optical Isolation:
2500 Vrms (min) isolation between logic and field circuits for industrial safety.
- High Noise Immunity:
EMI‑shielded ABS enclosure with internal conductive coating and conformal‑coated PCB for harsh environments.
- DIN‑Rail or Panel Mounting:
Compact, rugged housing with screw‑terminal connectors for quick installation.
- Software‑Configurable Address and Baud Rate:
Default ID = 01 (Hex), 9600 bps; configurable via RS‑485 commands or NuDAM Administration Utility.
Comprehensive Product Summary – NuDAM ND‑6063 8‑Channel Relay Form A Output Module
### 1. Product Overview
Product Name: NuDAM 8‑Channel Relay Form A Output Module
Model Number: ND‑6063
Series: NuDAM‑6000 Series Distributed Data Acquisition and Control Modules
Article Number: ND‑6063
Manufacturer: ADLINK Technology Inc. (Taipei, Taiwan)
The ND‑6063 is part of ADLINK’s NuDAM‑6000 family of distributed I/O and data‑acquisition modules designed for industrial automation, remote monitoring, and process control. It provides eight independent relay output channels of Form A (normally‑open) type, controllable through an RS‑485 multi‑drop network. The module enables direct switching of AC or DC loads and integrates seamlessly into a NuDAM RS‑485 network of up to 256 modules.
### 2. Key Features
- Eight Form A Relay Outputs:
Each channel provides an independent normally‑open contact for switching AC or DC loads.
- Relay Ratings:
– 0.5 A @ 125 VAC (max)
– 1 A @ 30 VDC (max)
- RS‑485 Communication Interface:
Two‑wire, half‑duplex differential bus supporting up to 115.2 kbps and 4000 ft (1200 m) transmission distance.
- Multi‑Drop Networking:
Up to 128 modules per bus segment, 256 modules total with repeaters.
- ASCII Command/Response Protocol:
Simple printable‑character protocol for configuration and control, compatible with most programming languages.
- Programmable Host Watchdog Timer:
Ensures safe output state if host communication fails; timeout adjustable from 100 ms to 25.5 s.
- Internal Hardware Watchdog:
150 ms device‑level supervisor resets the module automatically on internal fault.
- Optical Isolation:
2500 Vrms (min) isolation between logic and field circuits for industrial safety.
- High Noise Immunity:
EMI‑shielded ABS enclosure with internal conductive coating and conformal‑coated PCB for harsh environments.
- DIN‑Rail or Panel Mounting:
Compact, rugged housing with screw‑terminal connectors for quick installation.
- Software‑Configurable Address and Baud Rate:
Default ID = 01 (Hex), 9600 bps; configurable via RS‑485 commands or NuDAM Administration Utility.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Interface | RS‑485, 2‑wire, half‑duplex differential |
| Communication Speed | 1200 – 115 200 bps |
| Protocol | ASCII command/response |
| Relay Type | 8 × Form A (N.O.) mechanical relays |
| Contact Rating | 0.5 A @ 125 VAC max; 1 A @ 30 VDC max |
| Relay ON/OFF Time | ≤ 3 ms |
| Breakdown Voltage | 750 Vrms (between open contacts); 1000 Vrms (between contact & coil) |
| Insulation Resistance | ≥ 1000 MΩ @ 500 VDC |
| Expected Life | 10⁵ operations @ 0.5 A AC 125 V resistive load (20 cpm) or 10⁸ operations no load (180 cpm) |
| Isolation Voltage | 2500 Vrms (min) logic to field |
| Power Supply | +10 V DC to +30 V DC unregulated |
| Power Consumption | 1.2 W typical |
| Operating Temperature | –10 °C to +70 °C |
| Storage Temperature | –25 °C to +80 °C |
| Humidity | 0 – 95 % RH non‑condensing |
| Case Material | Flame‑retardant ABS plastic with EMI shield coating |
| Mounting | DIN‑rail or panel mount |
| Dimensions / Weight | Compact module (approx. 120 × 72 × 30 mm; ≈ 250 g) *typical for NuDAM modules* |
### 4. Functionality
Operating Principle:
Each relay channel acts as an electrically isolated switch controlled by the internal microprocessor. When a digital “ON” command is received via RS‑485, the corresponding relay coil energizes, closing the normally‑open contact and completing the external circuit. When “OFF,” the contact opens, interrupting the load.
Use Cases / Applications:
- Remote control of solenoids, lamps, alarms, and contactors
- Switching of low‑power AC/DC loads in process automation
- Integration with PLCs, SCADA, or PC‑based control systems
- Laboratory and test‑stand signal routing
- Building automation and energy‑management systems
Compatibility:
Fully compatible with other NuDAM‑6000 modules (analog I/O, digital I/O, counter/frequency, communication converters). Controlled via RS‑485 from a host PC, PLC, or embedded controller using ASCII commands or the NuDAM Administration Utility.
### 5. Components & Accessories
Included Items:
- ND‑6063 module with screw‑terminal block
- Quick‑start sheet / user manual (reference to NuDAM‑6000 User’s Guide)
Connectors / Pin Assignments:
| Pin No. | Signal Name | Description |
|--------------|----------------|-----------------|
| 1 | RL6 NO | Relay 6 normally open contact |
| 2 | RL6 COM | Relay 6 common terminal |
| 3 | RL7 NO | Relay 7 normally open contact |
| 4 | RL7 COM | Relay 7 common terminal |
| 5 | RL8 NO | Relay 8 normally open contact |
| 6 | DEFAULT* / RL8 NO | Default‑state pin (short to GND for factory reset) / Relay 8 NO |
| 7 | (Y) DATA+ | RS‑485 data line positive |
| 8 | (G) DATA– | RS‑485 data line negative |
| 9 | (R) +VS | Power input +10 V to +30 V DC |
| 10 | (B) GND | Power ground |
| 11 | RL1 NO | Relay 1 normally open contact |
| 12 | RL1 COM | Relay 1 common terminal |
| 13 | RL2 NO | Relay 2 normally open contact |
| 14 | RL2 COM | Relay 2 common terminal |
| 15 | RL3 NO | Relay 3 normally open contact |
| 16 | RL3 COM | Relay 3 common terminal |
| 17 | RL4 NO | Relay 4 normally open contact |
| 18 | RL4 COM | Relay 4 common terminal |
| 19 | RL5 NO | Relay 5 normally open contact |
| 20 | RL5 COM | Relay 5 common terminal |
Optional Accessories:
- ND‑6520 RS‑232 ↔ RS‑485 converter (for PC connection)
- ND‑6510 RS‑485 repeater (for extended distance or >128 modules)
- Shielded twisted‑pair RS‑485 cable (120 Ω characteristic impedance)
- 120 Ω termination resistors for bus ends
### 6. Installation & Setup
Requirements:
- DC power supply +10 V to +30 V (typical 24 V DC)
- RS‑485 two‑wire bus connection (Data+, Data–)
- Host controller with RS‑232 or USB port and NuDAM converter (ND‑6520 or ND‑6530)
Mounting Options:
- DIN‑rail mount using integrated clip
- Panel mount via screw holes on housing
Configuration Procedure:
1. Default State Initialization:
Short the DEFAULT* pin to GND and power on to enter default mode (ID = 00, 9600 bps, checksum disabled).
2. Assign Unique Address and Baud Rate:
Use command `%(OldAddr)(NewAddr)(TypeCode)(BaudRate)(ChecksumFlag)` or NuDAM Administration Utility.
3. Connect to RS‑485 Network:
Wire Data+ and Data– in daisy‑chain topology; terminate both ends with 120 Ω resistors.
4. Power Up Sequence:
Apply DC power after verifying polarity; then start host software.
5. Verification:
Issue `$<Addr>M` to read module name and confirm communication.
Wiring Example (Form A Relay Output):
```
External Power Source (+Vs)
│
├── RLn NO → Load → RLn COM → External Power Ground
```
Each relay channel switches its own load circuit independently.
### 7. Performance & Capabilities
- Switching Speed: ≤ 3 ms operate/release
- Load Capacity: 0.5 A @ 125 VAC or 1 A @ 30 VDC resistive load
- Isolation: ≥ 2500 Vrms logic‑to‑relay; ≥ 750 Vrms contact‑to‑contact
- Reliability: ≥ 10⁵ operations at rated load; ≥ 10⁸ no‑load operations
- Network Capacity: 128 modules per segment (256 with repeater)
- Communication Distance: up to 4000 ft (1200 m) per segment
- Data Integrity: Checksum option for error detection; slew‑rate‑limited drivers reduce EMI.
- Limitations: Not intended for high‑current or inductive loads without external protection (diodes or snubbers).
### 8. Standards & Compliance
- Electrical Isolation: Complies with EIA RS‑485 standard for balanced differential transmission.
- Safety & EMC: CE Class A conformity (industrial environment).
- Environmental Protection: Conformal coating for humidity and chemical resistance.
- RoHS Compliance: Lead‑free manufacturing process.
- Quality Assurance: Manufactured under ADLINK ISO 9001 certified quality system.
### 9. Additional Information
Warranty:
One‑year limited warranty against defects in materials and workmanship from date of purchase. ADLINK will repair or replace defective units under standard RMA procedure. Warranty excludes damage from misuse, improper installation, or operation beyond specified ratings.
Technical Support:
ADLINK provides NuDAM Administration Utility software for Windows and Linux drivers, user manuals, and command‑set documentation. Support is available through regional offices and authorized distributors.
Maintenance & Service:
Modules require no routine maintenance. Keep terminals clean and tight; avoid exposure to excessive vibration or moisture. For relay longevity, avoid switching inductive loads without snubber circuits. Return units for service in original packaging with proof of purchase.
Firmware Updates:
Field‑programmable via RS‑485 interface using NuDAM utility when new firmware revisions are released.
Safety Notes:
- Do not exceed rated contact voltage or current.
- Provide external fuse or breaker for load circuits.
- Ensure proper earth grounding and shielding of RS‑485 cables.
- Never connect/disconnect wiring while powered.
### Summary
The ADLINK NuDAM ND‑6063 is a compact, network‑addressable 8‑channel Form A relay output module engineered for distributed control over an RS‑485 industrial bus. It combines reliable electromechanical switching with robust isolation, watchdog protection, and simple ASCII‑based communication. Designed for integration into the NuDAM‑6000 series, it enables flexible, scalable remote I/O expansion for automation, test, and monitoring systems. With its rugged construction, wide power range, and straightforward configuration, the ND‑6063 delivers dependable performance in demanding industrial environments.
### 1. Product Overview
Product Name: NuDAM 8‑Channel Relay Form A Output Module
Model Number: ND‑6063
Series: NuDAM‑6000 Series Distributed Data Acquisition and Control Modules
Article Number: ND‑6063
Manufacturer: ADLINK Technology Inc. (Taipei, Taiwan)
The ND‑6063 is part of ADLINK’s NuDAM‑6000 family of distributed I/O and data‑acquisition modules designed for industrial automation, remote monitoring, and process control. It provides eight independent relay output channels of Form A (normally‑open) type, controllable through an RS‑485 multi‑drop network. The module enables direct switching of AC or DC loads and integrates seamlessly into a NuDAM RS‑485 network of up to 256 modules.
### 2. Key Features
- Eight Form A Relay Outputs:
Each channel provides an independent normally‑open contact for switching AC or DC loads.
- Relay Ratings:
– 0.5 A @ 125 VAC (max)
– 1 A @ 30 VDC (max)
- RS‑485 Communication Interface:
Two‑wire, half‑duplex differential bus supporting up to 115.2 kbps and 4000 ft (1200 m) transmission distance.
- Multi‑Drop Networking:
Up to 128 modules per bus segment, 256 modules total with repeaters.
- ASCII Command/Response Protocol:
Simple printable‑character protocol for configuration and control, compatible with most programming languages.
- Programmable Host Watchdog Timer:
Ensures safe output state if host communication fails; timeout adjustable from 100 ms to 25.5 s.
- Internal Hardware Watchdog:
150 ms device‑level supervisor resets the module automatically on internal fault.
- Optical Isolation:
2500 Vrms (min) isolation between logic and field circuits for industrial safety.
- High Noise Immunity:
EMI‑shielded ABS enclosure with internal conductive coating and conformal‑coated PCB for harsh environments.
- DIN‑Rail or Panel Mounting:
Compact, rugged housing with screw‑terminal connectors for quick installation.
- Software‑Configurable Address and Baud Rate:
Default ID = 01 (Hex), 9600 bps; configurable via RS‑485 commands or NuDAM Administration Utility.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|-------------------|
| Interface | RS‑485, 2‑wire, half‑duplex differential |
| Communication Speed | 1200 – 115 200 bps |
| Protocol | ASCII command/response |
| Relay Type | 8 × Form A (N.O.) mechanical relays |
| Contact Rating | 0.5 A @ 125 VAC max; 1 A @ 30 VDC max |
| Relay ON/OFF Time | ≤ 3 ms |
| Breakdown Voltage | 750 Vrms (between open contacts); 1000 Vrms (between contact & coil) |
| Insulation Resistance | ≥ 1000 MΩ @ 500 VDC |
| Expected Life | 10⁵ operations @ 0.5 A AC 125 V resistive load (20 cpm) or 10⁸ operations no load (180 cpm) |
| Isolation Voltage | 2500 Vrms (min) logic to field |
| Power Supply | +10 V DC to +30 V DC unregulated |
| Power Consumption | 1.2 W typical |
| Operating Temperature | –10 °C to +70 °C |
| Storage Temperature | –25 °C to +80 °C |
| Humidity | 0 – 95 % RH non‑condensing |
| Case Material | Flame‑retardant ABS plastic with EMI shield coating |
| Mounting | DIN‑rail or panel mount |
| Dimensions / Weight | Compact module (approx. 120 × 72 × 30 mm; ≈ 250 g) *typical for NuDAM modules* |
### 4. Functionality
Operating Principle:
Each relay channel acts as an electrically isolated switch controlled by the internal microprocessor. When a digital “ON” command is received via RS‑485, the corresponding relay coil energizes, closing the normally‑open contact and completing the external circuit. When “OFF,” the contact opens, interrupting the load.
Use Cases / Applications:
- Remote control of solenoids, lamps, alarms, and contactors
- Switching of low‑power AC/DC loads in process automation
- Integration with PLCs, SCADA, or PC‑based control systems
- Laboratory and test‑stand signal routing
- Building automation and energy‑management systems
Compatibility:
Fully compatible with other NuDAM‑6000 modules (analog I/O, digital I/O, counter/frequency, communication converters). Controlled via RS‑485 from a host PC, PLC, or embedded controller using ASCII commands or the NuDAM Administration Utility.
### 5. Components & Accessories
Included Items:
- ND‑6063 module with screw‑terminal block
- Quick‑start sheet / user manual (reference to NuDAM‑6000 User’s Guide)
Connectors / Pin Assignments:
| Pin No. | Signal Name | Description |
|--------------|----------------|-----------------|
| 1 | RL6 NO | Relay 6 normally open contact |
| 2 | RL6 COM | Relay 6 common terminal |
| 3 | RL7 NO | Relay 7 normally open contact |
| 4 | RL7 COM | Relay 7 common terminal |
| 5 | RL8 NO | Relay 8 normally open contact |
| 6 | DEFAULT* / RL8 NO | Default‑state pin (short to GND for factory reset) / Relay 8 NO |
| 7 | (Y) DATA+ | RS‑485 data line positive |
| 8 | (G) DATA– | RS‑485 data line negative |
| 9 | (R) +VS | Power input +10 V to +30 V DC |
| 10 | (B) GND | Power ground |
| 11 | RL1 NO | Relay 1 normally open contact |
| 12 | RL1 COM | Relay 1 common terminal |
| 13 | RL2 NO | Relay 2 normally open contact |
| 14 | RL2 COM | Relay 2 common terminal |
| 15 | RL3 NO | Relay 3 normally open contact |
| 16 | RL3 COM | Relay 3 common terminal |
| 17 | RL4 NO | Relay 4 normally open contact |
| 18 | RL4 COM | Relay 4 common terminal |
| 19 | RL5 NO | Relay 5 normally open contact |
| 20 | RL5 COM | Relay 5 common terminal |
Optional Accessories:
- ND‑6520 RS‑232 ↔ RS‑485 converter (for PC connection)
- ND‑6510 RS‑485 repeater (for extended distance or >128 modules)
- Shielded twisted‑pair RS‑485 cable (120 Ω characteristic impedance)
- 120 Ω termination resistors for bus ends
### 6. Installation & Setup
Requirements:
- DC power supply +10 V to +30 V (typical 24 V DC)
- RS‑485 two‑wire bus connection (Data+, Data–)
- Host controller with RS‑232 or USB port and NuDAM converter (ND‑6520 or ND‑6530)
Mounting Options:
- DIN‑rail mount using integrated clip
- Panel mount via screw holes on housing
Configuration Procedure:
1. Default State Initialization:
Short the DEFAULT* pin to GND and power on to enter default mode (ID = 00, 9600 bps, checksum disabled).
2. Assign Unique Address and Baud Rate:
Use command `%(OldAddr)(NewAddr)(TypeCode)(BaudRate)(ChecksumFlag)` or NuDAM Administration Utility.
3. Connect to RS‑485 Network:
Wire Data+ and Data– in daisy‑chain topology; terminate both ends with 120 Ω resistors.
4. Power Up Sequence:
Apply DC power after verifying polarity; then start host software.
5. Verification:
Issue `$<Addr>M` to read module name and confirm communication.
Wiring Example (Form A Relay Output):
```
External Power Source (+Vs)
│
├── RLn NO → Load → RLn COM → External Power Ground
```
Each relay channel switches its own load circuit independently.
### 7. Performance & Capabilities
- Switching Speed: ≤ 3 ms operate/release
- Load Capacity: 0.5 A @ 125 VAC or 1 A @ 30 VDC resistive load
- Isolation: ≥ 2500 Vrms logic‑to‑relay; ≥ 750 Vrms contact‑to‑contact
- Reliability: ≥ 10⁵ operations at rated load; ≥ 10⁸ no‑load operations
- Network Capacity: 128 modules per segment (256 with repeater)
- Communication Distance: up to 4000 ft (1200 m) per segment
- Data Integrity: Checksum option for error detection; slew‑rate‑limited drivers reduce EMI.
- Limitations: Not intended for high‑current or inductive loads without external protection (diodes or snubbers).
### 8. Standards & Compliance
- Electrical Isolation: Complies with EIA RS‑485 standard for balanced differential transmission.
- Safety & EMC: CE Class A conformity (industrial environment).
- Environmental Protection: Conformal coating for humidity and chemical resistance.
- RoHS Compliance: Lead‑free manufacturing process.
- Quality Assurance: Manufactured under ADLINK ISO 9001 certified quality system.
### 9. Additional Information
Warranty:
One‑year limited warranty against defects in materials and workmanship from date of purchase. ADLINK will repair or replace defective units under standard RMA procedure. Warranty excludes damage from misuse, improper installation, or operation beyond specified ratings.
Technical Support:
ADLINK provides NuDAM Administration Utility software for Windows and Linux drivers, user manuals, and command‑set documentation. Support is available through regional offices and authorized distributors.
Maintenance & Service:
Modules require no routine maintenance. Keep terminals clean and tight; avoid exposure to excessive vibration or moisture. For relay longevity, avoid switching inductive loads without snubber circuits. Return units for service in original packaging with proof of purchase.
Firmware Updates:
Field‑programmable via RS‑485 interface using NuDAM utility when new firmware revisions are released.
Safety Notes:
- Do not exceed rated contact voltage or current.
- Provide external fuse or breaker for load circuits.
- Ensure proper earth grounding and shielding of RS‑485 cables.
- Never connect/disconnect wiring while powered.
### Summary
The ADLINK NuDAM ND‑6063 is a compact, network‑addressable 8‑channel Form A relay output module engineered for distributed control over an RS‑485 industrial bus. It combines reliable electromechanical switching with robust isolation, watchdog protection, and simple ASCII‑based communication. Designed for integration into the NuDAM‑6000 series, it enables flexible, scalable remote I/O expansion for automation, test, and monitoring systems. With its rugged construction, wide power range, and straightforward configuration, the ND‑6063 delivers dependable performance in demanding industrial environments.
