Comprehensive Product Summary – ADLINK PCIe-9834P

---

### 1. Product Overview

Product Name: PCIe-9834P
Model: PCIe-9834P
Series: PCIe-9814/9834 Series – 4-Channel PCI Express Digitizers
Article Number: PCIe-9834P
Manufacturer: ADLINK Technology, Inc.
Part Number: 50-11263-1000
Revision: Manual Rev. 2.00 (June 3, 2016)

The ADLINK PCIe-9834P is a high-performance, four-channel, 16-bit, 80 MS/s PCI Express digitizer card designed for precision, high-speed data acquisition. It integrates a Phase-Locked Loop (PLL) synchronization module, 1 GB of onboard memory, and a PCI Express Gen1 x4 interface, providing a robust solution for simultaneous multi-channel analog signal capture and analysis. The PCIe-9834P is part of ADLINK’s advanced PCIe-9814/9834 series, engineered for applications requiring high resolution, low noise, and precise timing synchronization.

---

### 2. Key Features

- High-Speed Sampling: Up to 80 mega-samples per second (MS/s) per channel.
- High Resolution: 16-bit analog-to-digital conversion for superior signal fidelity.
- Four Simultaneous Channels: True simultaneous sampling across all four analog inputs with no inter-channel phase delay.
- Wide Bandwidth: 40 MHz analog input bandwidth for high-frequency signal acquisition.
- Programmable Input Range: ±0.5 V, ±1 V, ±5 V, or ±10 V, selectable via software.
- Selectable Input Impedance: 50 Ω or 1 MΩ, software-configurable for flexible signal interfacing.
- Onboard Memory: 1 GB shared acquisition memory for extended recording durations.
- Digital Filtering: FPGA-based 10 MHz or 20 MHz digital low-pass filter options.
- PLL Synchronization Module: Provides precise clock synchronization across multiple cards (exclusive to PCIe-9834P).
- Scatter-Gather DMA: High-speed, CPU-independent data transfer for continuous streaming.
- Triggering Flexibility: Supports software, analog, external digital, and SSI (System Synchronization Interface) triggers.
- Clock Sources: Internal, external, or external reference clock (REF_CLK) for flexible timing control.
- Auto-Calibration: Fully automated calibration with onboard precision voltage references.
- Software Support: Compatible with WD-DASK, LabVIEW, MATLAB, and Visual Studio environments.
- Operating System Support: Windows XP/7/8/10 (x86/x64) and Linux.
- Environmental Compliance: RoHS and WEEE compliant; CE and FCC Class A certified.

---

### 3. Technical Specifications

Analog Input:
- Channels: 4 single-ended
- Resolution: 16 bits
- Input Coupling: DC
- Input Impedance: 50 Ω or 1 MΩ (software selectable)
- Input Range: ±0.5 V, ±1 V, ±5 V, ±10 V (±10 V supported only at 1 MΩ)
- Bandwidth: 40 MHz (-3 dB)
- Input Overvoltage Protection:
- ±30 V @ 1 MΩ (±5 V, ±10 V ranges)
- ±10 V sine wave / 7 Vrms @ 50 Ω (±0.5 V, ±1 V, ±5 V ranges)
- Crosstalk: -80 dB (±0.5 V), -90 dB (±1 V, ±5 V, ±10 V)
- System Noise (RMS): 0.1–1.5 mVrms depending on range
- SNR: 67 dB
- THD: -78 dB
- SFDR: 78 dB

Offset Error (Typical):
| Range | Offset Error |
|--------|---------------|
| ±0.5 V | ±0.1 mV |
| ±1 V | ±0.2 mV |
| ±5 V | ±0.5 mV |
| ±10 V | ±0.5 mV |

Gain Error: ±0.15% across all ranges and impedances.

Physical Dimensions: 167.64 mm (W) × 106.68 mm (H) (6.53” × 4.16”)
Weight: Approx. 200 g (excluding packaging)
Bus Interface: PCI Express Gen1 x4
Operating Temperature: 0°C to +50°C
Storage Temperature: -20°C to +80°C
Relative Humidity: 10%–90%, non-condensing
Power Consumption:
- +3.3 V: 18.7 mA (standby) / 21.4 mA (full load)
- +12 V: 675 mA (standby) / 697 mA (full load)
- Total Power: 8.162 W (standby) / 8.435 W (full load)

---

### 4. Functionality

The PCIe-9834P digitizer captures analog signals through four simultaneous input channels, converting them into high-resolution digital data using a 16-bit ADC. The card’s FPGA manages data buffering, filtering, and DMA transfers to host memory. The onboard PLL module ensures precise synchronization when multiple cards are used in parallel, enabling coherent multi-channel acquisition.

Use Cases and Applications:
- Energy management and power system monitoring (e.g., partial discharge detection, power line analysis).
- Non-destructive testing (NDT) and ultrasonic inspection.
- Radar and LiDAR signal acquisition.
- Scientific instrumentation and transient signal capture.
- High-speed waveform analysis and laboratory research.

Compatibility:
- Works with standard PCI Express x4, x8, or x16 slots.
- Supports synchronization with other ADLINK digitizers via SSI bus.
- Compatible with external signal generators, oscilloscopes, and timing systems through SMB connectors.

---

### 5. Components & Accessories

Included Items:
- PCIe-9834P digitizer card
- ADLINK All-in-One software CD (drivers, SDKs, documentation)
- Quick Start Guide

Connectors (Front Panel SMB):
- 4 × Analog Input Channels (CH0–CH3)
- 1 × External Trigger Input (TRG)
- 1 × External Sample Clock Input (CLK IN)
- 1 × External Reference Clock Input (REF_CLK, PCIe-9834P only)

Optional Accessories:
- ACL-eSSI-2/3/4 cables for multi-card synchronization
- Shielded SMB coaxial cables for analog and trigger connections

---

### 6. Installation & Setup

Requirements:
- Available PCI Express x4 (or higher) slot
- Compatible operating system (Windows or Linux)
- Administrative privileges for driver installation

Installation Steps:
1. Power off the host system and remove the cover.
2. Insert the PCIe-9834P into an available PCIe x4 slot.
3. Secure the bracket with the retaining screw.
4. Replace the system cover and power on the computer.
5. Install ADLINK drivers and software from the provided CD.

Setup Notes:
- Handle the card using an anti-static wrist strap and mat.
- Allow a 15–20 minute warm-up before calibration.
- Configure input impedance, voltage range, and trigger modes via software.
- Use WD-DASK or LabVIEW toolkit for configuration and data acquisition.

---

### 7. Performance & Capabilities

Sampling and Timing:
- Sampling Rate: 1.22 kS/s to 80 MS/s (internal clock)
- External Clock Input: 20–80 MHz
- Timebase Accuracy: ±25 ppm
- External Reference Clock: 10 MHz TTL (3.3–5 V)
- External Sample Clock Input Range: 1–5 Vpp

Triggering:
- Sources: Software, external digital, analog (CH0–CH3), SSI
- Modes: Post-trigger, pre-trigger, delayed, middle, and re-trigger
- External Trigger Input: 3.3 V TTL (5 V tolerant), 20 ns minimum pulse width
- Polarity: Rising or falling edge selectable

Data Transfer:
- Scatter-Gather DMA for continuous high-speed streaming
- 1 GB onboard FIFO memory for buffering
- PCIe Gen1 x4 interface providing up to 1 GB/s throughput

Synchronization:
- SSI interface for multi-card synchronization
- REF_CLK input for 10 MHz reference clock (PLL-based synchronization)
- Card numbering via onboard DIP switch (0–15)

Efficiency and Limitations:
- High throughput with minimal CPU overhead
- Limited to 40 MHz analog bandwidth
- ±10 V range available only at 1 MΩ impedance

---

### 8. Standards & Compliance

Certifications:
- CE (Electromagnetic Compatibility)
- FCC Class A (EMI/EMC compliance)
- RoHS (Restriction of Hazardous Substances)
- WEEE (Waste Electrical and Electronic Equipment Directive)

Industry Standards:
- PCI Express Gen1 x4 compliant
- TTL-compatible trigger and clock interfaces
- SMB coaxial connectors for signal integrity

Environmental Responsibility:
ADLINK adheres to global environmental standards, ensuring all materials and manufacturing processes minimize ecological impact. The PCIe-9834P is fully compliant with EU RoHS and WEEE directives.

---

### 9. Additional Information

Calibration:
- Factory-calibrated with constants stored in EEPROM (Bank 0).
- User auto-calibration supported (Bank 1).
- Onboard reference voltages: +1.8 V, +0.9 V, +0.45 V.
- Reference drift: <3 ppm/°C.
- Recommended warm-up: 15–20 minutes before calibration.

Maintenance:
- Periodic recalibration recommended for long-term accuracy.
- Keep connectors clean and free from dust.
- Avoid exposure to moisture or extreme temperatures.

Firmware & Updates:
- Supports software-based firmware updates via onboard flash memory.
- Multi-boot recovery switch (SW2) for firmware restoration.

Warranty & Support:
- Standard ADLINK limited warranty (contact regional office for terms).
- Global technical support via ADLINK’s “Ask an Expert” portal.
- Regional service centers in Taiwan, USA, China, Japan, Germany, France, Korea, Singapore, India, Israel, and the UK.

Contact Information:
- Website: [www.adlinktech.com](http://www.adlinktech.com)
- Email: service@adlinktech.com
- Headquarters: ADLINK Technology, Inc., New Taipei City, Taiwan
- Support Portal: [http://askanexpert.adlinktech.com](http://askanexpert.adlinktech.com)

---

### Summary

The ADLINK PCIe-9834P is a precision-engineered, high-speed PCI Express digitizer optimized for demanding data acquisition applications. With its 16-bit resolution, 80 MS/s sampling rate, and 1 GB onboard memory, it delivers exceptional performance for real-time signal capture and analysis. The integrated PLL module ensures precise synchronization across multiple modules, making it ideal for scalable, multi-channel measurement systems. Its robust design, comprehensive software support, and compliance with international standards make it a versatile and reliable solution for industrial, scientific, and research environments.