Comprehensive Product Summary: SFP100-SS30-I-DDM

---

### 1. Product Overview

Product Name: SFP100-SS30-I-DDM
Model Number: SFP100-SS30-I-DDM
Series: Fast Ethernet SFP Optical Transceiver Modules
Article Number: SFP100-SS30-I-DDM
Manufacturer: ORing Industrial Networking Corp.
Product Type: 100 Mbps Single-Mode SFP Optical Transceiver with Digital Diagnostic Monitoring (DDM)
Transmission Distance: 30 km
Wavelength: 1310 nm
Operating Temperature Range: -40°C to +85°C (Industrial Grade)
Connector Type: LC Duplex
Fiber Type: Single-mode (9/125 μm)

The ORing SFP100-SS30-I-DDM is a ruggedized, industrial-grade Fast Ethernet SFP transceiver designed for long-distance single-mode fiber communication. It supports 100 Mbps data transmission over distances up to 30 kilometers using a 1310 nm wavelength laser source. The module integrates Digital Diagnostic Monitoring (DDM) functionality, enabling real-time monitoring of critical optical parameters such as temperature, voltage, transmit (TX) and receive (RX) optical power, and laser bias current.

---

### 2. Key Features

- High-Performance 100 Mbps Transmission: Supports Fast Ethernet data rates up to 100 Mbps over single-mode fiber.
- Extended Transmission Distance: Capable of transmitting optical signals up to 30 km using 9/125 μm single-mode fiber.
- Industrial Temperature Range: Designed for harsh environments with an extended operating temperature range of -40°C to +85°C.
- Digital Diagnostic Monitoring (DDM): Provides real-time monitoring of optical transceiver parameters for predictive maintenance and network reliability.
- LC Duplex Connector: Compact, industry-standard LC interface for easy integration with fiber patch cords and network equipment.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime.
- Compliance with SFP MSA Standards: Ensures interoperability with a wide range of network switches, routers, and media converters.
- Low Power Consumption: Optimized for energy-efficient operation in industrial networking devices.
- Rugged Design: Built for industrial-grade reliability, vibration resistance, and extended service life.
- Compatible with ORing Industrial Ethernet Switches: Seamless integration with ORing’s managed and unmanaged switch series.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Data Rate | 100 Mbps (Fast Ethernet) |
| Fiber Type | Single-mode (9/125 μm) |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 30 km |
| Wavelength | 1310 nm |
| Optical Output Power (Max TX) | 0 dBm |
| Optical Output Power (Min TX) | -15 dBm |
| Receiver Sensitivity (Min Input Power) | -34 dBm |
| Receiver Saturation (Max Input Power) | 0 dBm |
| Link Budget | 19 dB |
| Operating Temperature | -40°C to +85°C (Industrial Grade) |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Digital Diagnostic Monitoring (DDM) | Supported |
| Power Supply Voltage | 3.3 V DC nominal |
| Power Consumption | <1 W typical |
| Dimensions (Approx.) | 13.4 mm (W) × 56.5 mm (L) × 12.6 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Compliance | SFP MSA, IEEE 802.3u 100BASE-FX |

---

### 4. Functionality

The SFP100-SS30-I-DDM operates as a modular optical transceiver that converts electrical Ethernet signals into optical signals for transmission over single-mode fiber. It uses a 1310 nm laser diode for transmission (TX) and a photodiode receiver for optical-to-electrical conversion (RX).

How It Works:
- The module plugs into an SFP port on a compatible network device (e.g., switch, router, or media converter).
- The electrical Ethernet signal from the host device is converted into an optical signal by the internal laser transmitter.
- The optical signal is transmitted through a single-mode fiber cable up to 30 km.
- At the receiving end, another compatible SFP transceiver converts the optical signal back into an electrical Ethernet signal.

Use Cases and Applications:
- Industrial Ethernet networks requiring long-distance fiber connectivity.
- Remote monitoring and control systems in transportation, energy, and manufacturing sectors.
- Outdoor or harsh-environment network deployments.
- Backbone connections between network switches in large facilities.
- Integration into ORing’s industrial-grade switches and media converters.

Compatibility:
- Fully compliant with SFP MSA (Multi-Source Agreement) standards.
- Compatible with IEEE 802.3u 100BASE-FX Fast Ethernet standard.
- Interoperable with other standard-compliant SFP ports from major network equipment vendors.

---

### 5. Components & Accessories

Included Components:
- 1 × SFP100-SS30-I-DDM transceiver module
- Protective dust caps for LC connectors
- Product documentation or datasheet (depending on packaging)

Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-SS3M:* LC/LC single-mode fiber patch cord, 9/125 μm, 3 m length.
- *FPC-SCLC-SS3M:* SC/LC single-mode fiber patch cord, 9/125 μm, 3 m length.
- *FPC-SCST-SS3M:* SC/ST single-mode fiber patch cord, 9/125 μm, 3 m length.
- Fiber Patch Adapters:
- *FCA-SC-SS:* SC/SC single-mode fiber adapter, 9/125 μm.
- DIN-Rail Power Supplies (for associated network devices):
- *DR-4512:* 45W, 12VDC/3.5A
- *DR-4524:* 45W, 24VDC/2A
- *DR-75-24:* 75W, 24VDC/3.2A
- *DR-120-24:* 120W, 24VDC/5A
- Power Adapters:
- *PAA-121000:* 12VDC/1000mA, US plug
- *PAE-121000:* 12VDC/1000mA, EU plug
- *PAX-482500:* 48VDC/2500mA, 120W, universal input

These accessories ensure optimal connectivity and power delivery for ORing networking devices that utilize the SFP100-SS30-I-DDM module.

---

### 6. Installation & Setup

Installation Requirements:
- Compatible SFP slot on a network device supporting 100 Mbps fiber connections.
- Single-mode fiber optic cable with LC connectors.
- Clean fiber connectors to prevent signal loss or damage.

Installation Steps:
1. Power off the host device or ensure the SFP slot supports hot-swapping.
2. Remove the protective dust cap from the SFP module and the LC connectors.
3. Insert the SFP100-SS30-I-DDM module into the SFP port until it clicks securely.
4. Connect the single-mode fiber cable to the LC duplex interface (TX to RX, RX to TX).
5. Power on the device and verify link status via LED indicators or network management software.
6. Use DDM monitoring tools (if supported by the host device) to check optical power levels and temperature.

Configuration:
- No manual configuration required; the module is plug-and-play.
- DDM parameters can be accessed through SNMP or device management interfaces for diagnostics.

Mounting Options:
- Direct insertion into SFP slots on switches, routers, or media converters.
- Compatible with ORing’s industrial-grade DIN-rail mounted networking equipment.

---

### 7. Performance & Capabilities

Transmission Performance:
- Supports full-duplex 100 Mbps data transmission.
- Stable optical link up to 30 km with 19 dB link budget.
- Low bit error rate (BER) under standard operating conditions.

Optical Characteristics:
- Transmitter: 1310 nm FP (Fabry-Perot) laser.
- Receiver: PIN photodiode with high sensitivity (-34 dBm).
- Optical output power range: -15 dBm to 0 dBm.
- Receiver saturation threshold: 0 dBm.

Electrical Characteristics:
- Power supply: 3.3 V DC ±5%.
- Typical power consumption: <1 W.
- Compatible with standard SFP electrical interface.

Environmental Performance:
- Industrial-grade temperature tolerance (-40°C to +85°C).
- Resistant to vibration, shock, and electromagnetic interference.
- Suitable for outdoor enclosures and industrial cabinets.

Limitations:
- Designed for single-mode fiber only (not compatible with multimode).
- Maximum transmission distance limited to 30 km.
- Requires optical attenuator if used for short-distance (<1 km) connections to prevent receiver saturation.

---

### 8. Standards & Compliance

Industry Standards:
- IEEE 802.3u 100BASE-FX Fast Ethernet standard.
- SFP Multi-Source Agreement (MSA) compliance.
- Digital Diagnostic Monitoring (DDM) per SFF-8472 standard.
- RoHS compliant (Restriction of Hazardous Substances).
- CE and FCC electromagnetic compatibility standards.

Safety & Environmental Compliance:
- Meets industrial EMC and safety requirements.
- Designed for use in environments with high electrical noise and temperature variation.
- Complies with international optical safety standards (Class 1 Laser Product).

Interoperability:
- Compatible with ORing’s industrial Ethernet switches, media converters, and routers.
- Interoperable with third-party SFP-compliant devices from major network equipment manufacturers.

---

### 9. Additional Information

Warranty:
- Standard manufacturer warranty (typically 3 years for industrial-grade components).
- Covers defects in materials and workmanship under normal use.

Technical Support:
- ORing provides global technical support, including installation guidance, troubleshooting, and firmware updates for compatible devices.
- Online resources available at [www.oring-networking.com](http://www.oring-networking.com).

Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Regular monitoring of DDM parameters to detect early signs of degradation.
- Replace module if optical power levels fall outside specified ranges.

Firmware & Updates:
- The SFP module itself does not require firmware updates.
- DDM data can be integrated into network management systems for continuous monitoring.

Service Life:
- Designed for long-term operation in industrial environments.
- Typical MTBF (Mean Time Between Failures): >500,000 hours.

Packaging:
- Anti-static protective packaging with dust caps.
- Label includes model number, wavelength, distance, and serial number for traceability.

---

### Summary

The ORing SFP100-SS30-I-DDM is a robust, industrial-grade 100 Mbps single-mode SFP transceiver engineered for reliable long-distance fiber communication. Operating at a wavelength of 1310 nm, it supports transmission distances up to 30 km and integrates Digital Diagnostic Monitoring for real-time performance tracking. Its extended temperature range (-40°C to +85°C) and compliance with SFP MSA and IEEE 802.3u standards make it ideal for mission-critical industrial networking applications.

With its LC duplex interface, low power consumption, and rugged design, the SFP100-SS30-I-DDM ensures stable, high-quality optical connectivity in demanding environments such as transportation systems, energy infrastructure, and factory automation networks.

Manufacturer: ORing Industrial Networking Corp.
Website: [www.oring-networking.com](http://www.oring-networking.com)
Tagline: *Designed for Rugged Excellence*

---

End of Product Summary – SFP100-SS30-I-DDM