Comprehensive Product Summary – SFP100-SS60-I

---

### 1. Product Overview

Product Name: SFP100-SS60-I
Article Number: SFP100-SS60-I
Series: Fast Ethernet SFP Optical Transceiver Series
Manufacturer: ORing Industrial Networking Corp.
Product Type: 100 Mbps Single-Mode SFP Optical Transceiver Module
Transmission Distance: 60 km
Wavelength: 1310 nm
Operating Temperature Range: -40°C to +85°C (Industrial Grade)
Connector Type: LC Duplex
Fiber Type: Single-mode (9/125 μm)

The ORing SFP100-SS60-I is an industrial-grade Fast Ethernet SFP (Small Form-factor Pluggable) optical transceiver designed for long-distance single-mode fiber communication up to 60 kilometers. It operates at a wavelength of 1310 nm and supports a data rate of 100 Mbps. The module is part of ORing’s ruggedized SFP product line, engineered for reliable operation in harsh industrial environments with extended temperature tolerance and high optical performance.

---

### 2. Key Features

- Long-Distance Transmission: Supports optical communication over single-mode fiber up to 60 km, ideal for wide-area industrial networks and remote site connectivity.
- Industrial Temperature Range: Operates reliably from -40°C to +85°C, ensuring stable performance in extreme environmental conditions.
- High Optical Sensitivity: Receiver sensitivity rated at -35 dBm, allowing for stable signal reception over long distances with minimal signal degradation.
- Standardized LC Duplex Connector: Ensures compatibility with standard single-mode fiber patch cords and network equipment.
- 1310 nm Wavelength Operation: Optimized for single-mode fiber transmission with low attenuation and high signal integrity.
- Hot-Pluggable SFP Form Factor: Enables easy installation and replacement without system downtime.
- Compliance with Fast Ethernet Standards: Fully compatible with IEEE 802.3u 100BASE-FX specifications.
- Ruggedized Design: Built for industrial applications with enhanced mechanical durability and thermal stability.
- Wide Compatibility: Works with ORing industrial switches, media converters, and other SFP-compliant networking devices.
- Optical Power Budget: 30 dB link budget, supporting reliable communication over long fiber runs.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model Name | SFP100-SS60-I |
| Data Rate | 100 Mbps (Fast Ethernet) |
| Fiber Type | Single-mode (9/125 μm) |
| Connector Type | LC Duplex |
| Transmission Distance | Up to 60 km |
| Wavelength | 1310 nm |
| Optical Output Power (Max TX) | 0 dBm |
| Optical Output Power (Min TX) | -5 dBm |
| Receiver Sensitivity (Min Input Power) | -35 dBm |
| Receiver Saturation (Max Input Power) | 0 dBm |
| Link Budget | 30 dB |
| Operating Temperature (Standard) | 0°C to +70°C |
| Operating Temperature (Industrial) | -40°C to +85°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Form Factor | SFP (Small Form-factor Pluggable) |
| Hot-Pluggable | Yes |
| Power Supply Voltage | 3.3 V DC (typical) |
| Power Consumption | <1 W (typical) |
| Dimensions | Approx. 56.5 mm (L) × 13.7 mm (W) × 8.5 mm (H) |
| Weight | Approx. 20 g |
| Material | Metal housing with EMI shielding |
| Cooling | Passive (air-cooled) |

---

### 4. Functionality

The SFP100-SS60-I functions as a modular optical transceiver for Fast Ethernet communication over single-mode fiber. It converts electrical Ethernet signals from a host device (such as an industrial Ethernet switch or media converter) into optical signals for transmission over fiber optic cable, and vice versa for reception.

Working Principle:
- Transmission: The module’s laser diode emits light at 1310 nm, modulated by the electrical data signal.
- Reception: The photodiode detects incoming optical signals and converts them back into electrical signals for the host device.
- Interface: The LC duplex connector provides separate transmit (TX) and receive (RX) channels for full-duplex communication.

Use Cases and Applications:
- Industrial Ethernet networks requiring long-distance fiber links.
- Remote monitoring and control systems in utilities, transportation, and energy sectors.
- Factory automation and process control networks.
- Outdoor or harsh-environment networking where temperature extremes are common.
- Integration with ORing industrial switches, routers, and media converters supporting SFP slots.

Compatibility:
- Compatible with standard SFP slots conforming to MSA (Multi-Source Agreement).
- Works with ORing’s Fast Ethernet and Gigabit Ethernet switches and converters.
- Supports standard single-mode fiber patch cords (LC-LC or LC-SC via adapters).

---

### 5. Components & Accessories

Included Components:
- SFP100-SS60-I transceiver module (individually packaged).
- Product documentation or datasheet (depending on shipment).

Optional Accessories:
- Fiber Patch Cords:
- *FPC-LCLC-SS3M:* LC/LC single-mode 9/125 μm, 3 m length.
- *FPC-SCLC-SS3M:* SC/LC single-mode 9/125 μm, 3 m length.
- *FPC-SCSC-SS3M:* SC/SC single-mode 9/125 μm, 3 m length.
- Fiber Patch Adapters:
- *FCA-SC-SS:* SC/SC single-mode adapter, 9/125 μm.
- DIN-Rail Power Supplies (for host devices):
- *DR-4512:* 45W, 12VDC/3.5A.
- *DR-4524:* 45W, 24VDC/2A.
- *DR-75-24:* 75W, 24VDC/3.2A.
- *DR-120-24:* 120W, 24VDC/5A.
- Power Adapters:
- *PAA-121000:* 12VDC/1000mA, US plug.
- *PAE-121000:* 12VDC/1000mA, EU plug.
- *PAX-482500:* 48VDC/2500mA, universal input.

These accessories ensure optimal connectivity and power delivery for ORing networking devices using the SFP100-SS60-I module.

---

### 6. Installation & Setup

Installation Requirements:
- Host device with an available SFP slot compliant with IEEE 802.3u 100BASE-FX.
- Single-mode fiber optic cable (9/125 μm) with LC connectors.
- Clean optical connectors to ensure low insertion loss.

Installation Steps:
1. Power off the host device or ensure hot-plug capability.
2. Remove the protective dust cap from the SFP module and the SFP slot.
3. Insert the SFP100-SS60-I into the slot until it clicks securely.
4. Connect the LC duplex fiber cable:
- TX (transmit) port to the RX port of the remote device.
- RX (receive) port to the TX port of the remote device.
5. Power on the device and verify link/activity LEDs.

Configuration:
- The SFP100-SS60-I is plug-and-play; no software configuration is required.
- Compatible devices automatically detect and configure the SFP module.

Mounting Options:
- The module is designed for direct insertion into SFP cages on switches, routers, or converters.
- No external mounting hardware is required.

---

### 7. Performance & Capabilities

Transmission Performance:
- Supports full-duplex 100 Mbps Ethernet communication.
- Provides stable optical transmission over 60 km of single-mode fiber.
- High optical power budget (30 dB) ensures reliable operation even with intermediate splices or connectors.

Optical Characteristics:
- TX Power: -5 dBm to 0 dBm.
- RX Sensitivity: -35 dBm minimum.
- RX Saturation: 0 dBm maximum.
- Wavelength: 1310 nm laser source.

Electrical Characteristics:
- Supply Voltage: 3.3 V DC ±5%.
- Power Consumption: <1 W typical.

Environmental Performance:
- Operating Temperature: -40°C to +85°C (industrial).
- Storage Temperature: -40°C to +85°C.
- Humidity: 5–95% non-condensing.

Reliability:
- Designed for continuous operation in industrial environments.
- Resistant to vibration and temperature fluctuations.
- Complies with ORing’s “Designed for Rugged Excellence” standard.

Limitations:
- Not suitable for multi-mode fiber.
- Requires optical attenuator if used for short-distance connections (<2 km) to prevent receiver saturation.

---

### 8. Standards & Compliance

Industry Standards:
- IEEE 802.3u 100BASE-FX Fast Ethernet standard.
- SFP Multi-Source Agreement (MSA) compliant.
- RoHS compliant (Restriction of Hazardous Substances).
- CE and FCC Class A compliant (for electromagnetic compatibility).

Optical and Safety Compliance:
- Laser Class 1 per IEC 60825-1 and FDA 21 CFR 1040.10/1040.11.
- Meets industrial EMC and safety standards for networking equipment.

Environmental Compliance:
- Lead-free and halogen-free construction.
- Designed for extended temperature operation and long service life.

---

### 9. Additional Information

Warranty:
- Standard manufacturer’s warranty (typically 3 years, depending on region and distributor).
- Covers defects in materials and workmanship under normal use.

Support:
- Technical support available through ORing’s global service network.
- Online resources: datasheets, installation guides, and compatibility charts at [www.oring-networking.com](https://www.oring-networking.com).

Maintenance:
- Periodic cleaning of LC connectors recommended to maintain optimal optical performance.
- Avoid bending fiber cables beyond minimum bend radius to prevent signal loss.
- Replace protective dust caps when module is not in use.

Firmware/Software Updates:
- The SFP100-SS60-I is a hardware-based optical transceiver; no firmware updates are required.

Service Life:
- Typical MTBF (Mean Time Between Failures): >100,000 hours under normal operating conditions.

Packaging:
- Individually packaged in anti-static protective casing.
- Includes labeling with model number, wavelength, and serial identification.

---

### Summary

The ORing SFP100-SS60-I is a high-performance, industrial-grade Fast Ethernet SFP optical transceiver designed for long-distance single-mode fiber communication up to 60 km. Operating at 1310 nm, it provides a robust and reliable optical link for industrial networking applications requiring extended reach and high environmental resilience. With its wide operating temperature range (-40°C to +85°C), LC duplex interface, and compliance with IEEE 802.3u standards, the SFP100-SS60-I is ideally suited for mission-critical networks in transportation, energy, and manufacturing sectors.

Its ruggedized design, high optical power budget, and compatibility with ORing’s industrial switches and converters make it a dependable choice for demanding environments where reliability and performance are paramount. The module’s plug-and-play functionality, combined with a comprehensive range of compatible accessories such as fiber patch cords and power supplies, ensures seamless integration into existing network infrastructures.

In essence, the SFP100-SS60-I delivers industrial-grade durability, long-distance optical performance, and standardized interoperability—making it a cornerstone component for robust, high-availability fiber Ethernet networks.