Comprehensive Product Summary – ORing SPL-101GT-AT PoE Splitter

---

### 1. Product Overview

Product Name: PoE Splitter 1000TX 1-Port 30W IP30 Slim Case
Model: SPL-101GT-AT
Series: SPL-101GT Series
Article Number: SPL-101GT-AT
Manufacturer: ORing Industrial Networking Corp.
Version: 1.1

The ORing SPL-101GT-AT is a compact, industrial-grade Gigabit Power over Ethernet (PoE) splitter designed to separate power and data from a single Ethernet cable. It supports IEEE 802.3at (PoE+) standards and delivers up to 30 watts of power input, converting it into a regulated 24VDC output suitable for non-PoE devices such as wireless access points, IP cameras, and VoIP phones. The unit features a rugged IP30-rated metal enclosure, DIN-rail and wall-mount options, and is optimized for use in harsh industrial environments.

---

### 2. Key Features

- IEEE 802.3at Compliant: Fully compliant with the PoE+ standard, ensuring compatibility with standard PoE injectors and switches.
- Gigabit Ethernet Support: Supports 10/100/1000Base-T(X) for both PoE input and data output, maintaining high-speed network performance.
- High Power Output: Provides up to 27 watts of usable DC power (24VDC @ 1.125A) for connected devices.
- Wide Input Voltage Range: Accepts 36–57VDC input via the RJ45 PoE port.
- Rugged Industrial Design: Constructed with an IP30-rated metal case for durability in demanding environments.
- Compact Slim Form Factor: Space-saving design with dimensions of 26.1(W) × 70(D) × 95(H) mm.
- Protection Features: Built-in short circuit, overload, and over-voltage protection, plus 1500V isolation between input and output.
- Flexible Mounting: Supports both DIN-rail and wall-mount installation.
- LED Indicators: One PWR/Ready LED for quick visual status monitoring.
- Environmental Resilience: Operates in extreme temperatures from -40°C to +70°C and humidity up to 90% non-condensing.
- Long-Term Reliability: Backed by a 5-year warranty from ORing Industrial Networking Corp.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model | SPL-101GT-AT |
| Series | SPL-101GT Series |
| Input Voltage | 36–57 VDC via RJ45 PoE port |
| Output Voltage / Current | 24VDC @ 1.125A (27W max) |
| Power Input Standard | IEEE 802.3at (PoE+) |
| Ethernet Standards | 10/100/1000Base-T(X), Auto MDI/MDIX |
| Isolation Protection | 1500V |
| Protection Features | Short circuit, overload, over-voltage |
| Enclosure Rating | IP30 metal case |
| Dimensions (W × D × H) | 26.1 × 70 × 95 mm (1.03 × 2.76 × 3.74 in) |
| Weight | 250 g |
| Operating Temperature | -40°C to +70°C (-40°F to +158°F) |
| Storage Temperature | -40°C to +85°C (-40°F to +185°F) |
| Operating Humidity | 5%–90% non-condensing |
| Mounting Options | DIN-rail and wall-mount |
| LED Indicator | 1 × Power/Ready LED (Blue) |
| Regulatory Compliance | FCC Part 15, CISPR (EN55022) Class A |
| EMS Immunity | EN61000-4-2/3/4/5/6/8/11 |
| Safety Standard | EN60950-1 |
| Warranty | 5 years |

---

### 4. Functionality

The SPL-101GT-AT functions as a PoE splitter, enabling non-PoE devices to be powered through a PoE-enabled network infrastructure. It receives both data and power through a single RJ45 PoE input port, separates the power from the data, and outputs:

- Data-only Ethernet through a standard RJ45 output port.
- Regulated DC power (24VDC) through a 4-pin terminal block or dedicated power output connector.

This allows network devices that do not natively support PoE to be deployed in PoE environments without additional power cabling.

Typical Use Cases:
- Supplying power to wireless access points, IP cameras, VoIP phones, or industrial controllers that require 12V or 24V DC input.
- Extending network connectivity in industrial automation, transportation, or outdoor surveillance systems.
- Integrating legacy non-PoE devices into modern PoE network infrastructures.

Compatibility:
- Compatible with IEEE 802.3at PoE+ injectors, PoE switches, and mid-span power sources.
- Supports Auto MDI/MDIX, allowing connection to any Ethernet device without crossover cables.

---

### 5. Components & Accessories

Included Items:
1. SPL-101GT-AT PoE Splitter Unit
2. 4-pin Terminal Block (for DC power output connection)
3. Dust Cover for RJ45 ports
4. Wall-Mount Kit
5. 25mm DIN-Rail Mounting Kit
6. Quick Installation Guide (QIG)

Optional Accessories:
- RJ45 Ethernet Cables (straight-through or crossover, depending on network topology)
- PoE Injector or PoE Switch (IEEE 802.3at compliant)
- External DC cabling for connecting to powered devices

Connectors:
- RJ45 PoE Input Port: Receives data and power (pins 1–8 per IEEE 802.3at standard)
- RJ45 Data Output Port: Transmits data only
- 4-pin Terminal Block: Provides 24VDC power output to the connected device

---

### 6. Installation & Setup

Mounting Options:
- DIN-Rail Installation:
Attach the included DIN-rail clip to the back of the unit and snap it onto a standard 25mm DIN rail.
- Wall-Mount Installation:
Use the provided wall-mount bracket and M3×3 screws to secure the unit to a flat surface.

Connection Steps:
1. Connect PoE Input:
Plug the Ethernet cable from a PoE switch or injector into the PoE IN port (RJ45).
2. Connect Data Output:
Connect the Data OUT port (RJ45) to the Ethernet port of the non-PoE device.
3. Connect Power Output:
Wire the 4-pin terminal block to the DC input of the powered device (observe polarity).
4. Verify LED Indicator:
The PWR/Ready LED should illuminate blue, indicating normal operation.

Configuration:
- No software configuration required; the splitter operates automatically upon connection.
- Ensure that the PoE source provides sufficient power (minimum 30W for full load).

Cabling Notes:
- Use Cat5e or higher Ethernet cables for Gigabit performance.
- Pins 7 and 8 (-Vdc) must not be shorted to ground to prevent damage.

---

### 7. Performance & Capabilities

Power Handling:
- Input: 36–57VDC (PoE+ standard)
- Output: 24VDC @ 1.125A (27W max)
- Efficiency: High conversion efficiency with minimal power loss

Network Performance:
- Supports full-duplex Gigabit Ethernet (1000 Mbps)
- Auto-negotiation and Auto MDI/MDIX ensure seamless connectivity
- Maintains data integrity with minimal latency or packet loss

Reliability & Protection:
- Short Circuit Protection: Automatically limits current to prevent damage.
- Overload Protection: Shuts down output in case of excessive load.
- Over-Voltage Protection: Prevents damage from input voltage surges.
- Isolation: 1500V isolation between input and output ensures electrical safety.

Environmental Performance:
- Designed for industrial-grade reliability in extreme conditions.
- Operates from -40°C to +70°C, suitable for outdoor or factory environments.
- Resistant to vibration, dust, and humidity (IP30 enclosure).

Limitations:
- Maximum output power limited to 27W; not suitable for devices requiring higher wattage.
- Requires a PoE+ (IEEE 802.3at) compliant power source for full performance.

---

### 8. Standards & Compliance

Ethernet & PoE Standards:
- IEEE 802.3 10Base-T
- IEEE 802.3u 100Base-TX
- IEEE 802.3ab 1000Base-T
- IEEE 802.3at (PoE+)

Electromagnetic Compatibility (EMC):
- EMI: FCC Part 15, CISPR (EN55022) Class A
- EMS Immunity:
- EN61000-4-2 (Electrostatic Discharge)
- EN61000-4-3 (Radiated Susceptibility)
- EN61000-4-4 (Electrical Fast Transient)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted Susceptibility)
- EN61000-4-8 (Power Frequency Magnetic Field)
- EN61000-4-11 (Voltage Dips and Interruptions)

Safety Compliance:
- EN60950-1 (Information Technology Equipment Safety)

Environmental & Mechanical:
- IP30-rated metal enclosure for industrial use
- RoHS-compliant materials (lead-free construction)

---

### 9. Additional Information

Warranty:
- 5-year limited warranty covering manufacturing defects and hardware failures under normal operating conditions.

Support & Documentation:
- Quick Installation Guide (QIG) included in the package.
- Additional resources, datasheets, and firmware updates available from ORing Industrial Networking Corp. website.

Maintenance:
- No periodic maintenance required.
- Ensure connectors remain clean and free of dust using the provided dust covers.
- Verify LED indicators periodically to confirm operational status.

Firmware & Updates:
- The SPL-101GT-AT operates as a hardware-based device with no firmware dependency; updates are not typically required.

Manufacturer Contact:
ORing Industrial Networking Corp.
Specializing in rugged industrial networking solutions, ORing provides a full range of PoE, Ethernet, and wireless communication products designed for mission-critical applications in automation, transportation, and surveillance.

---

### Summary

The ORing SPL-101GT-AT is a high-performance industrial PoE splitter engineered for environments where reliability, compactness, and ruggedness are essential. It bridges the gap between PoE infrastructure and non-PoE devices by delivering regulated 24VDC power and Gigabit data throughput through a single Ethernet connection. With its wide operating temperature range, robust protection mechanisms, and industrial-grade IP30 metal housing, the SPL-101GT-AT is ideal for factory automation, transportation systems, outdoor surveillance, and industrial IoT deployments.

Its plug-and-play design, DIN-rail/wall-mount flexibility, and compliance with IEEE 802.3at make it a versatile and dependable choice for system integrators and engineers seeking efficient power distribution in Ethernet-based networks.

---

End of Product Summary – SPL-101GT-AT (Version 1.1)