SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
U-PM-4-M
4-circuit Power Meter Modbus RTU 5..600A module
360,00 EUR
inkl. Umsatzsteuer 428,40 EUR
- Four‑Circuit Power Measurement:
Simultaneous monitoring of up to four independent electrical circuits, enabling multi‑channel energy management within a single compact module.
- Wide Current Clamp Range:
Compatible with external current clamps rated for 5 A, 60 A, 100 A, 200 A, 300 A, 400 A, and 600 A primary current, allowing flexible deployment across low‑ and high‑current systems.
- High‑Speed Modbus RTU Communication:
RS‑485 interface supporting baud rates from 1200 bps to 115 200 bps for integration with PLCs, SCADA, and energy management systems.
- Multi‑Parameter Data Acquisition:
Capable of recording up to 50 electrical parameters simultaneously, including voltage, current, power factor, frequency, and energy consumption.
- Compact, Space‑Saving Design:
Slim vertical housing (129.6 × 135 × 47.2 mm) optimized for DIN‑rail or wall mounting; up to 1.5 times more modules can be installed in the same space compared with conventional flat‑type I/O devices.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with isolation protection up to 3000 V DC, watchdog timers, and programmable safe‑state outputs.
- Flexible Power Supply:
Operates from +10 V DC to +60 V DC (typical 24 V DC), consuming approximately 5 W; reverse‑polarity protection included.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration data; modules can be replaced without re‑wiring or re‑programming.
- Ease of Installation and Maintenance:
Front‑facing terminal blocks, rotary address switches, and LED status indicators simplify setup, diagnostics, and field servicing.
- Extended Environmental Range:
Operating temperature –25 °C to +70 °C; humidity 5 % to 95 % RH (non‑condensing).
- Long‑Term Warranty:
Backed by a 5‑year manufacturer warranty covering defects under normal industrial use.
Simultaneous monitoring of up to four independent electrical circuits, enabling multi‑channel energy management within a single compact module.
- Wide Current Clamp Range:
Compatible with external current clamps rated for 5 A, 60 A, 100 A, 200 A, 300 A, 400 A, and 600 A primary current, allowing flexible deployment across low‑ and high‑current systems.
- High‑Speed Modbus RTU Communication:
RS‑485 interface supporting baud rates from 1200 bps to 115 200 bps for integration with PLCs, SCADA, and energy management systems.
- Multi‑Parameter Data Acquisition:
Capable of recording up to 50 electrical parameters simultaneously, including voltage, current, power factor, frequency, and energy consumption.
- Compact, Space‑Saving Design:
Slim vertical housing (129.6 × 135 × 47.2 mm) optimized for DIN‑rail or wall mounting; up to 1.5 times more modules can be installed in the same space compared with conventional flat‑type I/O devices.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with isolation protection up to 3000 V DC, watchdog timers, and programmable safe‑state outputs.
- Flexible Power Supply:
Operates from +10 V DC to +60 V DC (typical 24 V DC), consuming approximately 5 W; reverse‑polarity protection included.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration data; modules can be replaced without re‑wiring or re‑programming.
- Ease of Installation and Maintenance:
Front‑facing terminal blocks, rotary address switches, and LED status indicators simplify setup, diagnostics, and field servicing.
- Extended Environmental Range:
Operating temperature –25 °C to +70 °C; humidity 5 % to 95 % RH (non‑condensing).
- Long‑Term Warranty:
Backed by a 5‑year manufacturer warranty covering defects under normal industrial use.
Comprehensive Product Summary – Advanio U‑PM‑4‑M 4‑Circuit Power Meter Modbus RTU Module
### 1. Product Overview
Product Name: 4‑Circuit Power Meter Modbus RTU Module
Model: U‑PM‑4‑M
Article Number: U‑PM‑4‑M
Series: Wolf Series RS‑485 Remote I/O Modules
Manufacturer: Advanio Technology Co., Ltd.
Manufacturer Background:
Advanio Technology Co., Ltd. is a Taiwan‑based industrial automation and IoT solutions provider specializing in advanced input/output (I/O) technologies for Industry 4.0 and smart factory applications. Founded by a team of system engineers and IoT experts with over 20 years of field experience, Advanio designs rugged, reliable, and easily maintainable data acquisition modules for harsh industrial environments. The company’s product portfolio includes wired and wireless I/O modules (RS‑485, CAN, Ethernet, EtherCAT, PROFINET, Modbus TCP, Bluetooth, Wi‑Fi, 3G/4G), industrial computing platforms, and cloud‑based management tools accessible via Android/iOS devices.
### 2. Key Features
- Four‑Circuit Power Measurement:
Simultaneous monitoring of up to four independent electrical circuits, enabling multi‑channel energy management within a single compact module.
- Wide Current Clamp Range:
Compatible with external current clamps rated for 5 A, 60 A, 100 A, 200 A, 300 A, 400 A, and 600 A primary current, allowing flexible deployment across low‑ and high‑current systems.
- High‑Speed Modbus RTU Communication:
RS‑485 interface supporting baud rates from 1200 bps to 115 200 bps for integration with PLCs, SCADA, and energy management systems.
- Multi‑Parameter Data Acquisition:
Capable of recording up to 50 electrical parameters simultaneously, including voltage, current, power factor, frequency, and energy consumption.
- Compact, Space‑Saving Design:
Slim vertical housing (129.6 × 135 × 47.2 mm) optimized for DIN‑rail or wall mounting; up to 1.5 times more modules can be installed in the same space compared with conventional flat‑type I/O devices.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with isolation protection up to 3000 V DC, watchdog timers, and programmable safe‑state outputs.
- Flexible Power Supply:
Operates from +10 V DC to +60 V DC (typical 24 V DC), consuming approximately 5 W; reverse‑polarity protection included.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration data; modules can be replaced without re‑wiring or re‑programming.
- Ease of Installation and Maintenance:
Front‑facing terminal blocks, rotary address switches, and LED status indicators simplify setup, diagnostics, and field servicing.
- Extended Environmental Range:
Operating temperature –25 °C to +70 °C; humidity 5 % to 95 % RH (non‑condensing).
- Long‑Term Warranty:
Backed by a 5‑year manufacturer warranty covering defects under normal industrial use.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Measurement Circuits | 4 independent circuits |
| Measured Parameters | Up to 50 electrical parameters simultaneously |
| Primary Current Range | 5 A / 60 A / 100 A / 200 A / 300 A / 400 A / 600 A (via external clamp) |
| Communication Interface | RS‑485, Modbus RTU protocol |
| Baud Rate | 1200 – 115 200 bps (programmable) |
| Communication Distance | Up to 1.2 km (RS‑485 standard) |
| Isolation Protection | 3000 V DC (power, communication, and I/O) |
| Power Supply | +10 V DC to +60 V DC, ≈ 5 W consumption |
| Reverse Polarity Protection | Yes |
| Watchdog Timers | Hardware module watchdog (1.6 s fixed) and programmable system watchdog |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 % – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 129.6 × 135 × 47.2 mm |
| Mounting Options | DIN 35 rail or wall mounting |
| Housing Material | Industrial‑grade ABS/PC plastic |
| Weight | Approx. 0.5 kg (typical module) |
| Power Consumption per Module | ~5 W @ 24 V DC |
| Isolation Voltage | 3 kV DC between power, communication, and I/O |
| Compliance | CE, FCC Part 15, EMC (EMI/EMS) |
### 4. Functionality
Operating Principle:
The U‑PM‑4‑M measures electrical parameters from up to four circuits using external current clamps and voltage inputs. Data are digitized and transmitted via the RS‑485 Modbus RTU interface to a supervisory controller or SCADA system. The module functions as a slave device responding to Modbus queries from a host (PLC, PC, or HMI).
Use Cases and Applications:
- Industrial energy management and sub‑metering
- Process monitoring and load analysis
- Building automation and HVAC power tracking
- Laboratory and test‑bench instrumentation
- Supervisory control and data acquisition (SCADA)
- Distributed power systems and renewable‑energy monitoring
Compatibility:
Fully compatible with standard Modbus RTU masters, PLCs, PACs, and industrial PCs. Integrates seamlessly with Advanio’s Wolf‑series I/O ecosystem and third‑party Modbus controllers.
### 5. Components & Accessories
Included Items:
- U‑PM‑4‑M power meter module
- Detachable DIN‑rail mounting base (fixed seat)
- 14‑pin signal connector
- Plastic grounding tab and isolation tab
- Plastic buckle set for vertical mounting
- Quick‑start guide and documentation
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (model G‑M1A001)
- USB ↔ RS‑485 converter (model G‑M1E001)
- RS‑485 ↔ RS‑485 repeater (model G‑M1F001)
- External current clamps (5 A – 600 A)
- EEPROM replacement module for configuration backup
Connectors:
Plug‑in terminal blocks (AWG 16 – 30) for power and signal wiring; front‑facing for easy access.
### 6. Installation & Setup
Requirements:
- DC power supply 10 – 60 V DC (regulated or unregulated; ripple ≤ 5 V p‑p)
- Host PC or controller with RS‑485 port (or converter)
- Proper grounding (frame ground recommended)
Mounting Options:
- DIN Rail: Attach the detachable base to a standard DIN 35 rail; interconnect multiple modules using the 14‑pin docking connector for shared power and communication.
- Wall Mount: Secure the base to a flat surface using screws through the designated mounting holes.
Configuration Steps:
1. Address Setting: Use two rotary hexadecimal switches to assign a unique Modbus node address (1 – 247).
2. Communication Setup: Default 9600 bps, N, 8, 1; adjustable via Modbus registers or Advanio Utility software.
3. Power Connection: Connect +VS and GND to the power supply; ensure only one power source per module chain.
4. RS‑485 Wiring: Connect D+ and D– lines in daisy‑chain topology; terminate the last node with 120 Ω resistor.
5. EEPROM Initialization: Press the INIT button ≥ 3 s to restore factory defaults or initialize a new EEPROM.
6. LED Indicators: Monitor Power, System, and Communication LEDs for operational status and diagnostics.
Hot‑Swap Procedure:
Modules can be replaced without disconnecting wiring. Transfer the EEPROM from the old unit to the new one to restore configuration automatically.
### 7. Performance & Capabilities
- Measurement Accuracy: ±0.1 % FSR typical
- Sampling Rate: 2.5 samples per second per channel
- Resolution: 16‑bit A/D conversion
- Input Impedance: Voltage 2 MΩ; Current 120 Ω
- Noise Rejection: CMR 120 dB, NMR 100 dB @ 50/60 Hz
- Overvoltage Protection: ±240 V (max)
- Common‑Mode Voltage: 240 V (max)
- System Watchdog: Programmable timeout (0 – 25.5 s) with safe‑state output
- Module Watchdog: Hardware reset (1.6 s fixed) for self‑recovery
- Communication Distance: Up to 1.2 km (4000 ft) without repeater; up to 247 modules with 8 repeaters
- Power Efficiency: Low‑power design (~5 W) for continuous operation
- Reliability: MTBF > 100 000 hours (typical industrial use)
Limitations:
Requires external current clamps for measurement; not intended for direct connection to high‑voltage mains without proper transducers. Communication limited to RS‑485 (Modbus RTU); for Ethernet or wireless connectivity, use Advanio gateway modules.
### 8. Standards & Compliance
- Electrical Safety: Isolation 3000 V DC between power, communication, and I/O
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards
- CE Certification: Complies with European EMC Directive requirements
- FCC Compliance: Part 15 Class A device; operation subject to standard interference conditions
- Environmental Protection: Designed for industrial temperature range and high humidity operation
- Quality Assurance: Manufactured under rigorous validation and verification procedures for industrial reliability
### 9. Additional Information
Warranty:
5‑year limited warranty from date of purchase. Covers manufacturing defects and failures under normal operation. Excludes damage from improper installation, modification, or misuse. Defective units will be repaired or replaced free of charge within the warranty period.
Support & Service:
Technical support available via email (service@advanio.com.tw) and official website ([www.advanio.com.tw](http://www.advanio.com.tw)). Response within two working days. RMA procedure available for repairs and replacements.
Maintenance:
Modules require minimal maintenance. Ensure proper ventilation and clean terminals periodically. EEPROM can be replaced to restore configuration if damaged.
Software & Updates:
Configuration and diagnostic software (Advanio Utility) available for Windows PCs. Supports firmware updates via RS‑485 connection. Mobile applications for Android and iOS provide remote monitoring and configuration through Advanio Cloud.
Safety Recommendations:
- Always disconnect power before wiring or replacing modules.
- Use proper grounding to avoid electrical noise and ensure system stability.
- Do not exceed specified voltage and current ratings.
- Install modules in enclosures with adequate ventilation and protection from dust and moisture.
### Summary
The Advanio U‑PM‑4‑M is a compact, high‑performance 4‑circuit power‑metering module designed for industrial energy monitoring and automation systems. It combines multi‑channel measurement, wide current range compatibility, and robust Modbus RTU communication in a space‑efficient, rugged housing. With its wide power input range, 3000 V isolation, and comprehensive diagnostic features, the U‑PM‑4‑M delivers reliable data acquisition for smart factories, process control, and building automation applications. Backed by Advanio’s 5‑year warranty and industrial support infrastructure, it offers a cost‑effective and scalable solution for modern energy management and Industry 4.0 deployments.
### 1. Product Overview
Product Name: 4‑Circuit Power Meter Modbus RTU Module
Model: U‑PM‑4‑M
Article Number: U‑PM‑4‑M
Series: Wolf Series RS‑485 Remote I/O Modules
Manufacturer: Advanio Technology Co., Ltd.
Manufacturer Background:
Advanio Technology Co., Ltd. is a Taiwan‑based industrial automation and IoT solutions provider specializing in advanced input/output (I/O) technologies for Industry 4.0 and smart factory applications. Founded by a team of system engineers and IoT experts with over 20 years of field experience, Advanio designs rugged, reliable, and easily maintainable data acquisition modules for harsh industrial environments. The company’s product portfolio includes wired and wireless I/O modules (RS‑485, CAN, Ethernet, EtherCAT, PROFINET, Modbus TCP, Bluetooth, Wi‑Fi, 3G/4G), industrial computing platforms, and cloud‑based management tools accessible via Android/iOS devices.
### 2. Key Features
- Four‑Circuit Power Measurement:
Simultaneous monitoring of up to four independent electrical circuits, enabling multi‑channel energy management within a single compact module.
- Wide Current Clamp Range:
Compatible with external current clamps rated for 5 A, 60 A, 100 A, 200 A, 300 A, 400 A, and 600 A primary current, allowing flexible deployment across low‑ and high‑current systems.
- High‑Speed Modbus RTU Communication:
RS‑485 interface supporting baud rates from 1200 bps to 115 200 bps for integration with PLCs, SCADA, and energy management systems.
- Multi‑Parameter Data Acquisition:
Capable of recording up to 50 electrical parameters simultaneously, including voltage, current, power factor, frequency, and energy consumption.
- Compact, Space‑Saving Design:
Slim vertical housing (129.6 × 135 × 47.2 mm) optimized for DIN‑rail or wall mounting; up to 1.5 times more modules can be installed in the same space compared with conventional flat‑type I/O devices.
- Industrial‑Grade Reliability:
Designed for continuous operation in harsh environments with isolation protection up to 3000 V DC, watchdog timers, and programmable safe‑state outputs.
- Flexible Power Supply:
Operates from +10 V DC to +60 V DC (typical 24 V DC), consuming approximately 5 W; reverse‑polarity protection included.
- Hot‑Swap and Auto‑Configuration:
Detachable EEPROM retains configuration data; modules can be replaced without re‑wiring or re‑programming.
- Ease of Installation and Maintenance:
Front‑facing terminal blocks, rotary address switches, and LED status indicators simplify setup, diagnostics, and field servicing.
- Extended Environmental Range:
Operating temperature –25 °C to +70 °C; humidity 5 % to 95 % RH (non‑condensing).
- Long‑Term Warranty:
Backed by a 5‑year manufacturer warranty covering defects under normal industrial use.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Measurement Circuits | 4 independent circuits |
| Measured Parameters | Up to 50 electrical parameters simultaneously |
| Primary Current Range | 5 A / 60 A / 100 A / 200 A / 300 A / 400 A / 600 A (via external clamp) |
| Communication Interface | RS‑485, Modbus RTU protocol |
| Baud Rate | 1200 – 115 200 bps (programmable) |
| Communication Distance | Up to 1.2 km (RS‑485 standard) |
| Isolation Protection | 3000 V DC (power, communication, and I/O) |
| Power Supply | +10 V DC to +60 V DC, ≈ 5 W consumption |
| Reverse Polarity Protection | Yes |
| Watchdog Timers | Hardware module watchdog (1.6 s fixed) and programmable system watchdog |
| Operating Temperature | –25 °C to +70 °C |
| Storage Temperature | –30 °C to +75 °C |
| Humidity | 5 % – 95 % RH (non‑condensing) |
| Dimensions (W × H × D) | 129.6 × 135 × 47.2 mm |
| Mounting Options | DIN 35 rail or wall mounting |
| Housing Material | Industrial‑grade ABS/PC plastic |
| Weight | Approx. 0.5 kg (typical module) |
| Power Consumption per Module | ~5 W @ 24 V DC |
| Isolation Voltage | 3 kV DC between power, communication, and I/O |
| Compliance | CE, FCC Part 15, EMC (EMI/EMS) |
### 4. Functionality
Operating Principle:
The U‑PM‑4‑M measures electrical parameters from up to four circuits using external current clamps and voltage inputs. Data are digitized and transmitted via the RS‑485 Modbus RTU interface to a supervisory controller or SCADA system. The module functions as a slave device responding to Modbus queries from a host (PLC, PC, or HMI).
Use Cases and Applications:
- Industrial energy management and sub‑metering
- Process monitoring and load analysis
- Building automation and HVAC power tracking
- Laboratory and test‑bench instrumentation
- Supervisory control and data acquisition (SCADA)
- Distributed power systems and renewable‑energy monitoring
Compatibility:
Fully compatible with standard Modbus RTU masters, PLCs, PACs, and industrial PCs. Integrates seamlessly with Advanio’s Wolf‑series I/O ecosystem and third‑party Modbus controllers.
### 5. Components & Accessories
Included Items:
- U‑PM‑4‑M power meter module
- Detachable DIN‑rail mounting base (fixed seat)
- 14‑pin signal connector
- Plastic grounding tab and isolation tab
- Plastic buckle set for vertical mounting
- Quick‑start guide and documentation
Optional Accessories:
- RS‑232 ↔ RS‑485 isolated converter (model G‑M1A001)
- USB ↔ RS‑485 converter (model G‑M1E001)
- RS‑485 ↔ RS‑485 repeater (model G‑M1F001)
- External current clamps (5 A – 600 A)
- EEPROM replacement module for configuration backup
Connectors:
Plug‑in terminal blocks (AWG 16 – 30) for power and signal wiring; front‑facing for easy access.
### 6. Installation & Setup
Requirements:
- DC power supply 10 – 60 V DC (regulated or unregulated; ripple ≤ 5 V p‑p)
- Host PC or controller with RS‑485 port (or converter)
- Proper grounding (frame ground recommended)
Mounting Options:
- DIN Rail: Attach the detachable base to a standard DIN 35 rail; interconnect multiple modules using the 14‑pin docking connector for shared power and communication.
- Wall Mount: Secure the base to a flat surface using screws through the designated mounting holes.
Configuration Steps:
1. Address Setting: Use two rotary hexadecimal switches to assign a unique Modbus node address (1 – 247).
2. Communication Setup: Default 9600 bps, N, 8, 1; adjustable via Modbus registers or Advanio Utility software.
3. Power Connection: Connect +VS and GND to the power supply; ensure only one power source per module chain.
4. RS‑485 Wiring: Connect D+ and D– lines in daisy‑chain topology; terminate the last node with 120 Ω resistor.
5. EEPROM Initialization: Press the INIT button ≥ 3 s to restore factory defaults or initialize a new EEPROM.
6. LED Indicators: Monitor Power, System, and Communication LEDs for operational status and diagnostics.
Hot‑Swap Procedure:
Modules can be replaced without disconnecting wiring. Transfer the EEPROM from the old unit to the new one to restore configuration automatically.
### 7. Performance & Capabilities
- Measurement Accuracy: ±0.1 % FSR typical
- Sampling Rate: 2.5 samples per second per channel
- Resolution: 16‑bit A/D conversion
- Input Impedance: Voltage 2 MΩ; Current 120 Ω
- Noise Rejection: CMR 120 dB, NMR 100 dB @ 50/60 Hz
- Overvoltage Protection: ±240 V (max)
- Common‑Mode Voltage: 240 V (max)
- System Watchdog: Programmable timeout (0 – 25.5 s) with safe‑state output
- Module Watchdog: Hardware reset (1.6 s fixed) for self‑recovery
- Communication Distance: Up to 1.2 km (4000 ft) without repeater; up to 247 modules with 8 repeaters
- Power Efficiency: Low‑power design (~5 W) for continuous operation
- Reliability: MTBF > 100 000 hours (typical industrial use)
Limitations:
Requires external current clamps for measurement; not intended for direct connection to high‑voltage mains without proper transducers. Communication limited to RS‑485 (Modbus RTU); for Ethernet or wireless connectivity, use Advanio gateway modules.
### 8. Standards & Compliance
- Electrical Safety: Isolation 3000 V DC between power, communication, and I/O
- EMC Compliance: Tested for EMI and EMS per industrial EMC standards
- CE Certification: Complies with European EMC Directive requirements
- FCC Compliance: Part 15 Class A device; operation subject to standard interference conditions
- Environmental Protection: Designed for industrial temperature range and high humidity operation
- Quality Assurance: Manufactured under rigorous validation and verification procedures for industrial reliability
### 9. Additional Information
Warranty:
5‑year limited warranty from date of purchase. Covers manufacturing defects and failures under normal operation. Excludes damage from improper installation, modification, or misuse. Defective units will be repaired or replaced free of charge within the warranty period.
Support & Service:
Technical support available via email (service@advanio.com.tw) and official website ([www.advanio.com.tw](http://www.advanio.com.tw)). Response within two working days. RMA procedure available for repairs and replacements.
Maintenance:
Modules require minimal maintenance. Ensure proper ventilation and clean terminals periodically. EEPROM can be replaced to restore configuration if damaged.
Software & Updates:
Configuration and diagnostic software (Advanio Utility) available for Windows PCs. Supports firmware updates via RS‑485 connection. Mobile applications for Android and iOS provide remote monitoring and configuration through Advanio Cloud.
Safety Recommendations:
- Always disconnect power before wiring or replacing modules.
- Use proper grounding to avoid electrical noise and ensure system stability.
- Do not exceed specified voltage and current ratings.
- Install modules in enclosures with adequate ventilation and protection from dust and moisture.
### Summary
The Advanio U‑PM‑4‑M is a compact, high‑performance 4‑circuit power‑metering module designed for industrial energy monitoring and automation systems. It combines multi‑channel measurement, wide current range compatibility, and robust Modbus RTU communication in a space‑efficient, rugged housing. With its wide power input range, 3000 V isolation, and comprehensive diagnostic features, the U‑PM‑4‑M delivers reliable data acquisition for smart factories, process control, and building automation applications. Backed by Advanio’s 5‑year warranty and industrial support infrastructure, it offers a cost‑effective and scalable solution for modern energy management and Industry 4.0 deployments.
-
Advanio Power MeterDataSheet-EN.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
Kein Zubehör vorhanden.
