SUCHEN SIE DIE PASSENDE
INDUSTRIELLE LÖSUNG?
Entdecken Sie Embedded-, Kommunikations- und Automatisierungslösungen für Ihre Anwendung.
W-M2J501
4*DI Dry/Wet 4*DO NPN PoE TCP Modbus mini module
130,00 EUR
inkl. Umsatzsteuer 154,70 EUR
- 4 × Isolated Digital Inputs (Dry/Wet Contact): Configurable for dry or wet contact operation, supporting up to ±70 V input tolerance.
- 4 × Isolated NPN Digital Outputs: Open‑collector outputs with programmable power‑on and safety states.
- PoE (Power over Ethernet): Simplifies wiring by combining power and communication through a single Ethernet cable.
- Modbus TCP Protocol: Standard industrial Ethernet communication for easy integration with PLCs, SCADA, and HMI systems.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM.
- Rotary Switch Node Addressing: Two rotary switches allow quick Modbus node setup without software tools.
- Non‑Volatile EEPROM Backup: Configuration and calibration data retained during power loss or module replacement.
- Programmable Power‑On and Safety Values: Ensures controlled startup and safe fallback during communication loss.
- High Isolation Protection: 2.5 kV isolation between I/O, power, and communication circuits.
- Wide Power Input Range: +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact Industrial Design: 100 × 95 mm footprint, 20 mm width; DIN‑rail or wall‑mountable.
- Low Power Consumption: 1.6 W @ 24 V DC.
- Extended Operating Temperature: −25 °C to +70 °C.
- LED Diagnostics: Three front LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Rugged Industrial Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or system faults.
- 5‑Year Warranty: Long‑term reliability assurance for industrial environments.
- 4 × Isolated NPN Digital Outputs: Open‑collector outputs with programmable power‑on and safety states.
- PoE (Power over Ethernet): Simplifies wiring by combining power and communication through a single Ethernet cable.
- Modbus TCP Protocol: Standard industrial Ethernet communication for easy integration with PLCs, SCADA, and HMI systems.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM.
- Rotary Switch Node Addressing: Two rotary switches allow quick Modbus node setup without software tools.
- Non‑Volatile EEPROM Backup: Configuration and calibration data retained during power loss or module replacement.
- Programmable Power‑On and Safety Values: Ensures controlled startup and safe fallback during communication loss.
- High Isolation Protection: 2.5 kV isolation between I/O, power, and communication circuits.
- Wide Power Input Range: +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact Industrial Design: 100 × 95 mm footprint, 20 mm width; DIN‑rail or wall‑mountable.
- Low Power Consumption: 1.6 W @ 24 V DC.
- Extended Operating Temperature: −25 °C to +70 °C.
- LED Diagnostics: Three front LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Rugged Industrial Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or system faults.
- 5‑Year Warranty: Long‑term reliability assurance for industrial environments.
Comprehensive Product Summary – Advanio W‑M2J501 PoE Modbus TCP Digital I/O Module
### 1. Product Overview
Product Name: 4×DI Dry/Wet 4×DO NPN PoE TCP Modbus Mini Module
Model Number: W‑M2J501
Series: Wolf Series – Ethernet/Modbus TCP Remote I/O Family
Article Number: W‑M2J501
Manufacturer: Advanio Technology Co., Ltd.
Advanio Technology is a Taiwan‑based industrial automation manufacturer specializing in advanced I/O and data acquisition systems for Industry 4.0 and IoT applications. The company’s Wolf Series represents a modular, rugged, and space‑efficient line of remote I/O modules designed for distributed control, data collection, and process automation over industrial networks such as RS‑485, CAN, Profinet, EtherCAT, and Modbus TCP. The W‑M2J501 is a compact Ethernet‑based digital I/O module with Power‑over‑Ethernet (PoE) capability, providing four isolated digital inputs and four isolated NPN digital outputs in a 20 mm‑slim housing.
### 2. Key Features
- 4 × Isolated Digital Inputs (Dry/Wet Contact): Configurable for dry or wet contact operation, supporting up to ±70 V input tolerance.
- 4 × Isolated NPN Digital Outputs: Open‑collector outputs with programmable power‑on and safety states.
- PoE (Power over Ethernet): Simplifies wiring by combining power and communication through a single Ethernet cable.
- Modbus TCP Protocol: Standard industrial Ethernet communication for easy integration with PLCs, SCADA, and HMI systems.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM.
- Rotary Switch Node Addressing: Two rotary switches allow quick Modbus node setup without software tools.
- Non‑Volatile EEPROM Backup: Configuration and calibration data retained during power loss or module replacement.
- Programmable Power‑On and Safety Values: Ensures controlled startup and safe fallback during communication loss.
- High Isolation Protection: 2.5 kV isolation between I/O, power, and communication circuits.
- Wide Power Input Range: +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact Industrial Design: 100 × 95 mm footprint, 20 mm width; DIN‑rail or wall‑mountable.
- Low Power Consumption: 1.6 W @ 24 V DC.
- Extended Operating Temperature: −25 °C to +70 °C.
- LED Diagnostics: Three front LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Rugged Industrial Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or system faults.
- 5‑Year Warranty: Long‑term reliability assurance for industrial environments.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Inputs | 4 channels, dry/wet contact selectable |
| Input Voltage Range | 0 – 50 V DC (wet contact); logic 0 ≤ 3 V, logic 1 ≥ 10 V |
| Input Protection | ±70 V DC over‑voltage protection |
| Input Isolation | 2.5 kV between channels and logic |
| Digital Outputs | 4 channels, NPN open‑collector type |
| Output Voltage Range | 3.5 – 30 V DC |
| Output Current | 500 mA per channel (sink) |
| Isolation Voltage | 2.5 kV between I/O and logic |
| Power Supply | PoE (IEEE 802.3af) or +10 – +60 V DC external supply |
| Power Consumption | 1.6 W @ 24 V DC |
| Communication Interface | Ethernet 10/100 Base‑T, Modbus TCP |
| Node Address Setting | Dual rotary switches (1 – 247) |
| EEPROM | Non‑volatile, removable configuration memory |
| Indicators | Power LED, System LED, Communication LED |
| Isolation Protection | 2.5 kV between power, communication, and I/O |
| Dimensions (W × H × D) | 20 × 100 × 95 mm |
| Weight | Approx. 150 g |
| Material | Industrial‑grade ABS housing |
| Mounting | DIN‑rail (35 mm) or wall‑mount |
| Operating Temperature | −25 °C to +70 °C |
| Storage Temperature | −30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Isolation Type | Optical and galvanic isolation |
| Protection Class | EMC‑compliant, CE/FCC certified |
| Warranty | 5 years |
### 4. Functionality
The W‑M2J501 functions as a compact Ethernet remote I/O node for distributed digital signal acquisition and control. It communicates via Modbus TCP, allowing direct connection to industrial controllers, SCADA systems, or cloud‑based monitoring platforms. The module’s PoE capability eliminates the need for a separate power line, simplifying installation in distributed control cabinets or field junction boxes.
Typical Use Cases:
- Factory automation and process control
- Building and energy management systems
- Security and access control monitoring
- Machine status and alarm signal acquisition
- Remote equipment supervision via Ethernet
- Integration with PLCs, PACs, or industrial PCs using Modbus TCP
Operation Principle:
Each digital input channel detects external contact or voltage signals (dry/wet selectable). The digital outputs act as NPN open‑collector switches to drive relays, solenoids, or indicator lamps. The module exchanges I/O status and control commands with a host controller through Modbus TCP frames. Internal watchdogs ensure safe output states if communication is lost.
Compatibility:
- Compatible with standard Modbus TCP masters (PLC, SCADA, HMI, DCS).
- Interoperable with Advanio’s Wolf Series RS‑485 and Ethernet modules.
- Supports integration with third‑party automation software via Modbus TCP/IP.
### 5. Components & Accessories
Included Items:
- W‑M2J501 module
- Detachable 14‑pin terminal block for I/O wiring
- DIN‑rail mounting base and plastic isolation tab
- Quick‑start guide
Optional Accessories:
- RS‑232 ↔ RS‑485 or USB ↔ RS‑485 converters (for configuration)
- RS‑485 repeaters for extended networks
- Replacement EEPROM module for configuration backup
- Wall‑mount brackets and grounding tabs
Connectors:
- Plug‑in terminal blocks (AWG 16 – 30) for I/O and power
- RJ‑45 Ethernet port for Modbus TCP/PoE connection
### 6. Installation & Setup
Requirements:
- DC power supply +10 – +60 V DC (ripple ≤ 5 V p‑p) or PoE IEEE 802.3af
- Ethernet network supporting Modbus TCP protocol
- Host PC, PLC, or controller with Modbus TCP master capability
Mounting Options:
- DIN‑Rail Mounting: Snap the detachable base onto a standard 35 mm DIN rail. Modules can be chained using the supplied pin array for shared power and communication.
- Wall Mounting: Secure the base with screws; insert the module vertically.
- Grounding: Connect frame ground (FG) via DIN‑rail grounding tab or power connector to ensure EMC stability.
Configuration Steps:
1. Set the Modbus node address using the two rotary switches (range 1 – 247).
2. Connect Ethernet cable to RJ‑45 port (PoE or external power).
3. Verify LED indicators: Power ON, System OK, Communication flashing.
4. Use Advanio configuration utility or any Modbus TCP client to test I/O.
5. Optionally define power‑on and safety output values via Modbus registers.
Hot‑Swap Procedure:
- Power down or isolate the module.
- Remove the detachable terminal block and EEPROM.
- Insert EEPROM into the replacement module.
- Mount the new module and power up; configuration auto‑restores.
### 7. Performance & Capabilities
- Response Time: Determined by Modbus TCP polling rate; typically < 10 ms per channel.
- Input Counter Function: Each DI channel can count pulses up to 100 Hz (16‑bit).
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses.
- Output Control: Supports normal or inverted logic; programmable startup and safe states.
- Watchdog Protection:
- *Module Watchdog* – hardware‑based, resets module after 1.6 s inactivity.
- *System Watchdog* – software‑based, monitors host communication; triggers safe output state on timeout.
- Isolation & Noise Immunity: 2.5 kV isolation between I/O, power, and communication; designed for noisy industrial environments.
- Power Efficiency: 1.6 W @ 24 V DC ensures low heat dissipation and suitability for dense cabinet installations.
- Scalability: Up to 247 Modbus TCP nodes per network segment; modules can be cascaded via Ethernet switches.
- Reliability: Continuous operation in −25 °C to +70 °C ambient; EMC‑tested for EMI/EMS immunity.
Limitations:
- Digital output current limited to 500 mA per channel.
- Maximum of 10 modules per DIN‑rail power chain (≈ 30 W total).
- Communication performance depends on network latency and polling frequency.
### 8. Standards & Compliance
- Communication Protocol: Modbus TCP (IEEE 802.3 Ethernet)
- Isolation Voltage: 2.5 kV DC between I/O, power, and communication
- EMC Compliance:
- EMI/EMS tested for industrial environments
- CE mark recommended when installed in certified industrial chassis
- FCC Compliance:
- Complies with FCC Part 15, Class A
- Operation subject to non‑interference and acceptance of interference
- Environmental:
- RoHS‑compliant materials
- Operating humidity 5 – 95 % RH (non‑condensing)
- Safety: Internal reverse‑polarity protection and surge suppression
- Industry Standards:
- Modbus TCP v1.1b
- IEEE 802.3af PoE
- IEC 61000‑4 EMC immunity standards
### 9. Additional Information
Warranty & Service:
- Duration: 5 years from original purchase date.
- Coverage: Manufacturing defects, component failure under normal operation.
- Exclusions: Damage due to improper installation, misuse, or unauthorized repair.
- Service Procedure: Contact authorized dealer for RMA number; return defective unit with proof of purchase.
Maintenance:
- Periodically inspect wiring and grounding.
- Keep ventilation clear; avoid exposure to corrosive gases or moisture.
- Firmware and configuration updates available via Advanio support portal.
Technical Support:
- Email: service@advanio.com.tw
- Website: [https://www.advanio.com.tw](https://www.advanio.com.tw)
- Support Information Required: Model No., Serial No., Firmware version, system configuration, and error description.
- Response Time: Within 2 working days.
Manufacturer Address:
Advanio Technology Co., Ltd.
Taipei, Taiwan – Industrial Automation Division
### Summary
The Advanio W‑M2J501 is a compact, high‑reliability PoE Modbus TCP digital I/O module engineered for distributed industrial automation. It combines 4 isolated digital inputs and 4 isolated NPN outputs within a 20 mm‑slim DIN‑rail housing, offering 2.5 kV isolation, wide 10–60 V DC power range, and programmable safety logic. Its hot‑swappable EEPROM, rotary address switches, and LED diagnostics simplify installation and maintenance. Designed for harsh industrial environments, the W‑M2J501 delivers robust performance, flexible integration, and long‑term reliability under Advanio’s 5‑year warranty—making it an ideal choice for smart factories, process monitoring, and IoT‑enabled control systems.
### 1. Product Overview
Product Name: 4×DI Dry/Wet 4×DO NPN PoE TCP Modbus Mini Module
Model Number: W‑M2J501
Series: Wolf Series – Ethernet/Modbus TCP Remote I/O Family
Article Number: W‑M2J501
Manufacturer: Advanio Technology Co., Ltd.
Advanio Technology is a Taiwan‑based industrial automation manufacturer specializing in advanced I/O and data acquisition systems for Industry 4.0 and IoT applications. The company’s Wolf Series represents a modular, rugged, and space‑efficient line of remote I/O modules designed for distributed control, data collection, and process automation over industrial networks such as RS‑485, CAN, Profinet, EtherCAT, and Modbus TCP. The W‑M2J501 is a compact Ethernet‑based digital I/O module with Power‑over‑Ethernet (PoE) capability, providing four isolated digital inputs and four isolated NPN digital outputs in a 20 mm‑slim housing.
### 2. Key Features
- 4 × Isolated Digital Inputs (Dry/Wet Contact): Configurable for dry or wet contact operation, supporting up to ±70 V input tolerance.
- 4 × Isolated NPN Digital Outputs: Open‑collector outputs with programmable power‑on and safety states.
- PoE (Power over Ethernet): Simplifies wiring by combining power and communication through a single Ethernet cable.
- Modbus TCP Protocol: Standard industrial Ethernet communication for easy integration with PLCs, SCADA, and HMI systems.
- Hot‑Swap and Auto‑Configuration: Modules can be replaced without rewiring; configuration parameters are stored in a removable EEPROM.
- Rotary Switch Node Addressing: Two rotary switches allow quick Modbus node setup without software tools.
- Non‑Volatile EEPROM Backup: Configuration and calibration data retained during power loss or module replacement.
- Programmable Power‑On and Safety Values: Ensures controlled startup and safe fallback during communication loss.
- High Isolation Protection: 2.5 kV isolation between I/O, power, and communication circuits.
- Wide Power Input Range: +10 V DC to +60 V DC (ripple ≤ 5 V p‑p).
- Compact Industrial Design: 100 × 95 mm footprint, 20 mm width; DIN‑rail or wall‑mountable.
- Low Power Consumption: 1.6 W @ 24 V DC.
- Extended Operating Temperature: −25 °C to +70 °C.
- LED Diagnostics: Three front LEDs indicate power, system, and communication status for quick on‑site troubleshooting.
- Rugged Industrial Reliability: Built‑in hardware and system watchdogs for self‑recovery from communication or system faults.
- 5‑Year Warranty: Long‑term reliability assurance for industrial environments.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Digital Inputs | 4 channels, dry/wet contact selectable |
| Input Voltage Range | 0 – 50 V DC (wet contact); logic 0 ≤ 3 V, logic 1 ≥ 10 V |
| Input Protection | ±70 V DC over‑voltage protection |
| Input Isolation | 2.5 kV between channels and logic |
| Digital Outputs | 4 channels, NPN open‑collector type |
| Output Voltage Range | 3.5 – 30 V DC |
| Output Current | 500 mA per channel (sink) |
| Isolation Voltage | 2.5 kV between I/O and logic |
| Power Supply | PoE (IEEE 802.3af) or +10 – +60 V DC external supply |
| Power Consumption | 1.6 W @ 24 V DC |
| Communication Interface | Ethernet 10/100 Base‑T, Modbus TCP |
| Node Address Setting | Dual rotary switches (1 – 247) |
| EEPROM | Non‑volatile, removable configuration memory |
| Indicators | Power LED, System LED, Communication LED |
| Isolation Protection | 2.5 kV between power, communication, and I/O |
| Dimensions (W × H × D) | 20 × 100 × 95 mm |
| Weight | Approx. 150 g |
| Material | Industrial‑grade ABS housing |
| Mounting | DIN‑rail (35 mm) or wall‑mount |
| Operating Temperature | −25 °C to +70 °C |
| Storage Temperature | −30 °C to +75 °C |
| Humidity | 5 – 95 % RH (non‑condensing) |
| Isolation Type | Optical and galvanic isolation |
| Protection Class | EMC‑compliant, CE/FCC certified |
| Warranty | 5 years |
### 4. Functionality
The W‑M2J501 functions as a compact Ethernet remote I/O node for distributed digital signal acquisition and control. It communicates via Modbus TCP, allowing direct connection to industrial controllers, SCADA systems, or cloud‑based monitoring platforms. The module’s PoE capability eliminates the need for a separate power line, simplifying installation in distributed control cabinets or field junction boxes.
Typical Use Cases:
- Factory automation and process control
- Building and energy management systems
- Security and access control monitoring
- Machine status and alarm signal acquisition
- Remote equipment supervision via Ethernet
- Integration with PLCs, PACs, or industrial PCs using Modbus TCP
Operation Principle:
Each digital input channel detects external contact or voltage signals (dry/wet selectable). The digital outputs act as NPN open‑collector switches to drive relays, solenoids, or indicator lamps. The module exchanges I/O status and control commands with a host controller through Modbus TCP frames. Internal watchdogs ensure safe output states if communication is lost.
Compatibility:
- Compatible with standard Modbus TCP masters (PLC, SCADA, HMI, DCS).
- Interoperable with Advanio’s Wolf Series RS‑485 and Ethernet modules.
- Supports integration with third‑party automation software via Modbus TCP/IP.
### 5. Components & Accessories
Included Items:
- W‑M2J501 module
- Detachable 14‑pin terminal block for I/O wiring
- DIN‑rail mounting base and plastic isolation tab
- Quick‑start guide
Optional Accessories:
- RS‑232 ↔ RS‑485 or USB ↔ RS‑485 converters (for configuration)
- RS‑485 repeaters for extended networks
- Replacement EEPROM module for configuration backup
- Wall‑mount brackets and grounding tabs
Connectors:
- Plug‑in terminal blocks (AWG 16 – 30) for I/O and power
- RJ‑45 Ethernet port for Modbus TCP/PoE connection
### 6. Installation & Setup
Requirements:
- DC power supply +10 – +60 V DC (ripple ≤ 5 V p‑p) or PoE IEEE 802.3af
- Ethernet network supporting Modbus TCP protocol
- Host PC, PLC, or controller with Modbus TCP master capability
Mounting Options:
- DIN‑Rail Mounting: Snap the detachable base onto a standard 35 mm DIN rail. Modules can be chained using the supplied pin array for shared power and communication.
- Wall Mounting: Secure the base with screws; insert the module vertically.
- Grounding: Connect frame ground (FG) via DIN‑rail grounding tab or power connector to ensure EMC stability.
Configuration Steps:
1. Set the Modbus node address using the two rotary switches (range 1 – 247).
2. Connect Ethernet cable to RJ‑45 port (PoE or external power).
3. Verify LED indicators: Power ON, System OK, Communication flashing.
4. Use Advanio configuration utility or any Modbus TCP client to test I/O.
5. Optionally define power‑on and safety output values via Modbus registers.
Hot‑Swap Procedure:
- Power down or isolate the module.
- Remove the detachable terminal block and EEPROM.
- Insert EEPROM into the replacement module.
- Mount the new module and power up; configuration auto‑restores.
### 7. Performance & Capabilities
- Response Time: Determined by Modbus TCP polling rate; typically < 10 ms per channel.
- Input Counter Function: Each DI channel can count pulses up to 100 Hz (16‑bit).
- DI Latch Function: Captures transient signals ≥ 5 ms to prevent missed pulses.
- Output Control: Supports normal or inverted logic; programmable startup and safe states.
- Watchdog Protection:
- *Module Watchdog* – hardware‑based, resets module after 1.6 s inactivity.
- *System Watchdog* – software‑based, monitors host communication; triggers safe output state on timeout.
- Isolation & Noise Immunity: 2.5 kV isolation between I/O, power, and communication; designed for noisy industrial environments.
- Power Efficiency: 1.6 W @ 24 V DC ensures low heat dissipation and suitability for dense cabinet installations.
- Scalability: Up to 247 Modbus TCP nodes per network segment; modules can be cascaded via Ethernet switches.
- Reliability: Continuous operation in −25 °C to +70 °C ambient; EMC‑tested for EMI/EMS immunity.
Limitations:
- Digital output current limited to 500 mA per channel.
- Maximum of 10 modules per DIN‑rail power chain (≈ 30 W total).
- Communication performance depends on network latency and polling frequency.
### 8. Standards & Compliance
- Communication Protocol: Modbus TCP (IEEE 802.3 Ethernet)
- Isolation Voltage: 2.5 kV DC between I/O, power, and communication
- EMC Compliance:
- EMI/EMS tested for industrial environments
- CE mark recommended when installed in certified industrial chassis
- FCC Compliance:
- Complies with FCC Part 15, Class A
- Operation subject to non‑interference and acceptance of interference
- Environmental:
- RoHS‑compliant materials
- Operating humidity 5 – 95 % RH (non‑condensing)
- Safety: Internal reverse‑polarity protection and surge suppression
- Industry Standards:
- Modbus TCP v1.1b
- IEEE 802.3af PoE
- IEC 61000‑4 EMC immunity standards
### 9. Additional Information
Warranty & Service:
- Duration: 5 years from original purchase date.
- Coverage: Manufacturing defects, component failure under normal operation.
- Exclusions: Damage due to improper installation, misuse, or unauthorized repair.
- Service Procedure: Contact authorized dealer for RMA number; return defective unit with proof of purchase.
Maintenance:
- Periodically inspect wiring and grounding.
- Keep ventilation clear; avoid exposure to corrosive gases or moisture.
- Firmware and configuration updates available via Advanio support portal.
Technical Support:
- Email: service@advanio.com.tw
- Website: [https://www.advanio.com.tw](https://www.advanio.com.tw)
- Support Information Required: Model No., Serial No., Firmware version, system configuration, and error description.
- Response Time: Within 2 working days.
Manufacturer Address:
Advanio Technology Co., Ltd.
Taipei, Taiwan – Industrial Automation Division
### Summary
The Advanio W‑M2J501 is a compact, high‑reliability PoE Modbus TCP digital I/O module engineered for distributed industrial automation. It combines 4 isolated digital inputs and 4 isolated NPN outputs within a 20 mm‑slim DIN‑rail housing, offering 2.5 kV isolation, wide 10–60 V DC power range, and programmable safety logic. Its hot‑swappable EEPROM, rotary address switches, and LED diagnostics simplify installation and maintenance. Designed for harsh industrial environments, the W‑M2J501 delivers robust performance, flexible integration, and long‑term reliability under Advanio’s 5‑year warranty—making it an ideal choice for smart factories, process monitoring, and IoT‑enabled control systems.
-
Wolf Series-W-M2J501-201807.pdf
PDF Catalog
-
Advanio_Catalog_Wolf_Series_General.pdf
PDF Catalog
Kein Zubehör vorhanden.
