- **Industrial-Grade Design:** IP67-rated waterproof and dust-tight aluminum enclosure ensures reliable operation in outdoor and harsh industrial environments. - **High Wireless Performance:** Supports IEEE 802.11b/g/n standards with data rates up to 300 Mbps and throughput up to 80 Mbps. - **High Power Output:** Delivers up to 800 mW (29 dBm) transmit power for extended range and stable long-distance communication (up to 7 km for IAP-W420+). - **Multiple Operation Modes:** Configurable as Access Point, Client, AP-Client, or Bridge for flexible network topologies. - **Integrated Antenna:** Built-in 10 dBi directional panel antenna (IAP-W420+) for focused signal transmission and reception. - **Fast Roaming:** Supports X-Roaming with handover times under 100 ms for seamless mobility in dynamic wireless environments. - **Power over Ethernet (PoE):** IEEE 802.3af-compliant PoE PD input simplifies installation by combining power and data over a single cable. - **Advanced Security:** Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK (256-bit), TKIP, AES, and 802.1X authentication. - **Comprehensive Management:** Web-based configuration interface with HTTPS support, SNMP, Syslog, and event notification via email or SNMP traps. - **Wide Temperature Range:** Operates reliably from -20°C to +70°C, suitable for outdoor and industrial deployments. - **Regulatory Compliance:** Certified for FCC Part 15, CE, EN55022 Class A, EN60950-1 safety, and multiple IEC environmental standards.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Industrial-Grade Design:** IP67-rated waterproof and dustproof aluminum enclosure suitable for outdoor and industrial environments. - **Flexible Operating Modes:** Supports Access Point (AP), Client, AP-Client, Bridge, and Repeater modes for versatile deployment. - **High Wireless Performance:** IEEE 802.11b/g/n compliant with data rates up to 300 Mbps and high transmit power (up to 800 mW). - **Extended Range:** Two external N-type antenna connectors allow for long-distance communication and flexible antenna selection. - **Fast Roaming:** X-Roaming technology with roaming latency under 100 ms ensures seamless connectivity for mobile clients. - **Secure Wireless Communication:** Supports WEP (64/128-bit), WPA/WPA2, WPA-PSK, WPA2-PSK, TKIP, AES, and 802.1X authentication. - **PoE Power Input:** IEEE 802.3af-compliant Power over Ethernet (PD) for simplified installation and reduced cabling. - **Comprehensive Management:** Web-based configuration interface, HTTPS management, SNMP, Syslog, and event notifications via email or traps. - **Environmental Resilience:** Wide operating temperature range (-20°C to +70°C) and storage range (-30°C to +85°C). - **High Reliability:** Designed for continuous operation in industrial automation, transportation, and outdoor wireless infrastructure.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Industrial‑grade 5 GHz WLAN:** IEEE 802.11a/n compliant, supporting OFDM modulation and data rates up to 300 Mbps (air link) and 80 Mbps throughput. - **High Power Output:** 500 mW (27 dBm) transmit power for long‑distance wireless links up to 7 km (IAP‑W520+). - **Integrated Antenna:** Built‑in 15 dBi directional panel antenna for focused, long‑range coverage. - **Multiple Operation Modes:** Configurable as Access Point, Client, AP‑Client, or Repeater for flexible network architectures. - **Fast Roaming:** X‑Roaming support with handoff latency under 100 ms for mobile clients. - **Secure Wireless Transmission:** Supports WEP (64/128‑bit), WPA/WPA2, WPA‑PSK/WPA2‑PSK (TKIP/AES), and IEEE 802.1X authentication. - **PoE Power Input:** IEEE 802.3af Power‑over‑Ethernet (PD) compliant, simplifying installation by eliminating separate power cabling. - **Rugged Construction:** IP67‑rated aluminum enclosure for dust‑tight and waterproof protection. - **Wide Temperature Range:** Operates from ‑20 °C to +70 °C; storage from ‑40 °C to +85 °C. - **Comprehensive Management:** Web‑based GUI, HTTPS secure management, SNMP, Syslog, and email event notifications. - **Dual Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 ports (one PoE PD port, one standard LAN port) with auto‑negotiation and auto‑MDI/MDIX. - **Compact and Lightweight:** Designed for pole or wall mounting in outdoor industrial environments.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Industrial‑grade 5 GHz WLAN:** IEEE 802.11 a/n compliant, supporting OFDM modulation with data rates up to 300 Mbps (air link) and throughput exceeding 80 Mbps. - **High Power Output:** 500 mW (27 dBm) transmit power for long‑distance wireless links. - **Multiple Operating Modes:** Configurable as Access Point, Client, AP‑Client, Bridge, or Repeater. - **Fast Roaming:** X‑Roaming capability with handover latency under 100 ms for mobile applications. - **Dual Ethernet Ports:** Two 10/100Base‑T(X) RJ‑45 ports with auto‑negotiation; one port supports IEEE 802.3af PoE PD input. - **External Antenna Support:** Two N‑type connectors for flexible antenna selection and extended coverage. - **Rugged Construction:** IP67‑rated aluminum enclosure for outdoor and industrial use; resistant to dust, water, and harsh weather. - **Wide Temperature Range:** Operates from ‑20 °C to +70 °C; storage from ‑40 °C to +85 °C. - **Comprehensive Security:** WEP (64/128‑bit), WPA/WPA2, WPA‑PSK/WPA2‑PSK (TKIP/AES), and 802.1X authentication. - **Advanced Management:** Web‑based GUI with HTTPS, SNMP, Syslog, and e‑mail event notifications. - **Flexible Mounting:** Wall or pole mounting kits included for outdoor installation. - **Power over Ethernet:** Fully compliant with IEEE 802.3af PoE PD standard, simplifying installation and reducing cabling costs. - **Industrial Protocol Support:** ARP, BOOTP, DHCP, DNS, HTTPS, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, and STP (IEEE 802.1D). - **LED Indicators:** Power, Ethernet link/activity, and WLAN signal strength indicators for quick status monitoring.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Dual-Band IEEE 802.11 a/b/g/n WLAN:** Operates on both 2.4 GHz and 5 GHz bands, supporting up to 300 Mbps data rate. - **Gigabit Ethernet Interface:** One 10/100/1000Base-T(X) RJ45 port with auto MDI/MDIX and IEEE 802.3af PoE power input. - **Multiple Operation Modes:** Configurable as Access Point (AP), Client, Repeater, or Bridge for flexible network topologies. - **High Transmission Power:** Up to 500 mW output for extended coverage and stable connectivity in outdoor environments. - **Rugged IP67 Enclosure:** Industrial-grade waterproof and dustproof aluminum housing for outdoor installation. - **Fast Roaming (X-Roaming):** Seamless handover between access points with roaming latency under 100 ms. - **Advanced Security:** Supports WEP (64/128-bit), WPA/WPA2-PSK (TKIP/AES), and 802.1X authentication with RADIUS. - **Secure Management:** HTTPS web-based configuration interface with SNMP, Syslog, and email event notifications. - **Flexible Mounting:** Supports both wall and pole mounting with included hardware. - **Wide Temperature Range:** Operates reliably from -10°C to +75°C, suitable for industrial and outdoor use. - **Comprehensive Protocol Support:** Compatible with ARP, DHCP, DNS, HTTPs, SNMP, STP, TCP/IP, and more.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Dual-Band IEEE 802.11 a/b/g/n WLAN:** Supports both 2.4 GHz and 5 GHz frequency bands with selectable operation modes. - **High-Speed Wireless Connectivity:** Delivers up to 300 Mbps data rate using 802.11n MIMO technology. - **Multiple Operation Modes:** Configurable as Access Point (AP), Client, Repeater, or Bridge for flexible network topologies. - **Industrial-Grade Design:** IP67-rated waterproof and dustproof aluminum enclosure for outdoor and industrial use. - **Power-over-Ethernet (PoE):** Fully compliant with IEEE 802.3af standard, allowing single-cable power and data transmission. - **Advanced Security:** Supports WEP (64/128-bit), WPA/WPA2-PSK (TKIP/AES), and 802.1X/RADIUS authentication. - **Fast Roaming (X-Roaming):** Seamless handover between access points with roaming latency under 100 ms. - **Secure Management:** HTTPS-based web management interface for encrypted configuration access. - **Event Notification:** Supports Syslog, Email, and SNMP Trap for proactive system monitoring. - **Flexible Mounting:** Supports both wall and pole mounting with included hardware. - **Wide Temperature Range:** Operates reliably from -10°C to +75°C, suitable for outdoor and industrial environments. - **High Transmission Power:** Up to 500 mW output for extended coverage and signal penetration. - **LED Indicators:** Multi-status LEDs for power, system, WLAN (2.4G/5G), and signal strength monitoring.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Industrial-Grade Wireless Router:** Compliant with IEEE 802.11 a/b/g/n standards, supporting both 2.4GHz and 5GHz frequency bands. - **3G Cellular Connectivity:** Integrated GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA modem for mobile broadband access. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base-T(X) RJ-45 ports with auto MDI/MDI-X for LAN and WAN connections. - **PoE PD Support:** ETH2 (WAN port) supports IEEE 802.3af Power Device specification, enabling power input via PoE switches. - **Redundant Power Inputs:** Dual 12–48V DC inputs on a 6-pin terminal block for power reliability. - **High Wireless Throughput:** WLAN interface supports up to 300 Mbps link speed. - **Advanced Security:** Supports WEP, WPA/WPA2 (TKIP/AES), WPA-PSK, WPA2-PSK, and 802.1X authentication. - **VPN Support:** Integrated OpenVPN and PPTP VPN for secure remote access and site-to-site connectivity. - **Firewall & NAT Features:** Includes IP/MAC filtering, DMZ, Virtual Server, Port Triggering, and UPnP. - **Management & Monitoring:** Web-based GUI, HTTPS management, SNMP v1/v2, Syslog, and email/SNMP trap event notifications. - **Rugged Design:** IP-30 metal enclosure, DIN-rail and wall-mount installation options, and extended temperature operation (-10°C to 60°C). - **Event Warning System:** Supports Syslog, Email, SNMP Trap, Relay output, and Beeper alerts. - **High Reliability:** 5-year warranty and compliance with industrial EMC and safety standards.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **High-Speed Wireless Connectivity:** Supports IEEE 802.11 a/b/g/n standards with data rates up to 300 Mbps. - **Integrated 4G LTE Modem:** Built-in cellular module supporting GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA/HSPA+/LTE for global coverage. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base-T(X) RJ-45 ports with auto MDI/MDI-X for LAN/WAN flexibility. - **PoE PD Support:** ETH2 (WAN port) compliant with IEEE 802.3af Power Device specification, enabling power input via PoE switches. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 6-pin terminal block with reverse polarity protection. - **Industrial Design:** IP-30-rated metal housing, vibration and shock resistance per IEC60068 standards. - **Advanced Security:** Supports WEP, WPA/WPA2-PSK (TKIP/AES), 802.1X authentication, MAC/IP filtering, and firewall protection. - **VPN Support:** Integrated OpenVPN and PPTP VPN server/client for secure remote access. - **Comprehensive Management:** Web-based GUI, HTTPS, SNMP v1/v2, Syslog, and email/SNMP trap event notifications. - **Flexible WAN Options:** Dynamic/Static IP, PPPoE, 3G/4G modem dial-up, or wireless client mode. - **Event and Alarm System:** Supports Syslog, email alerts, SNMP traps, relay output, and digital I/O for event signaling. - **Mounting Options:** DIN-rail and wall-mount kits included for flexible installation. - **Warranty:** 5-year limited hardware warranty.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Dual RF IEEE 802.11 a/b/g/n Wireless Interface:** Supports simultaneous 2.4 GHz and 5 GHz operation with dual antennas for extended coverage and throughput up to 300 Mbps. - **Integrated 3G Cellular Modem:** Supports GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA standards for mobile WAN connectivity. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base-T(X) RJ-45 ports with auto MDI/MDI-X for LAN/WAN connections. - **PoE PD Support:** ETH2 (WAN port) is compliant with IEEE 802.3af Power Device specification, allowing power input via PoE. - **Redundant Power Inputs:** Dual 12–48 VDC inputs on a 6-pin terminal block with reverse polarity protection. - **Industrial Design:** IP-30 metal enclosure, DIN-rail and wall-mountable, designed for -10°C to +60°C operation. - **Advanced Security:** Supports WEP, WPA/WPA2 (TKIP/AES), WPA-PSK, 802.1X authentication, MAC/IP filtering, and firewall protection. - **VPN Support:** Integrated OpenVPN and PPTP VPN for secure remote access and site-to-site tunneling. - **Comprehensive Management:** Web-based GUI (HTTP/HTTPS), SNMP v1/v2, Syslog, Email alerts, and relay output for event notifications. - **High Reliability:** Supports STP (802.1D) for wireless redundancy, VRRP, and dynamic/static routing (RIPv1/v2). - **Event Notification:** Configurable via Syslog, Email, SNMP Trap, Relay output, and beeper. - **Warranty:** 5-year limited warranty.

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Industrial‑grade dual 3G cellular router** with integrated IEEE 802.11 a/b/g/n WLAN access point. - **Dual SIM slots** and dual 3G modem interfaces for redundancy, load balancing, or backup. - **Two 10/100/1000Base‑T(X)** Ethernet ports (ETH1 LAN, ETH2 WAN) with auto MDI/MDI‑X. - **PoE PD support** on ETH2 (WAN) compliant with IEEE 802.3af Power Device specification. - **High‑speed wireless LAN** up to 300 Mbps link rate (802.11n 40 MHz BW). - **Advanced security:** WEP (64/128‑bit), WPA/WPA2‑PSK (TKIP/AES), 802.1X authentication, MAC/IP filtering, firewall rules, and VPN (OpenVPN, PPTP, IPSec). - **Multiple WAN modes:** Dynamic/Static IP, PPPoE, Modem Dial‑up (3G/3.5G), and Wireless Client mode. - **Redundant power inputs** (12–48 V DC) with reverse polarity and over‑current protection. - **Rugged IP‑30 metal enclosure** for industrial environments. - **Wide temperature operation:** –10 to 60 °C (operating), –40 to 85 °C (storage). - **Comprehensive management:** HTTPS web interface, SNMP v1/v2, Syslog, Email alerts, and relay output. - **DIN‑rail and wall‑mount installation options.** - **Event warning system:** Syslog, Email, SNMP Trap, Relay output, and Beeper. - **5‑year manufacturer warranty.**

Manufacturer: Oring

Category: 3G/4G Access Point Router

- **Dual 4G LTE Cellular Connectivity:** Supports two independent 4G LTE modems for redundancy, load balancing, or backup operation. - **IEEE 802.11 a/b/g/n Wireless Access Point:** Provides high-speed WLAN connectivity up to 300 Mbps link rate. - **Dual Gigabit Ethernet Ports:** Two 10/100/1000Base-T(X) RJ45 ports with auto MDI/MDIX for LAN/WAN configuration. - **PoE PD Functionality:** ETH2 (WAN port) supports IEEE 802.3af Power Device specification, allowing power input via PoE. - **Redundant Power Inputs:** Dual DC inputs (12–48 VDC) with reverse polarity and overload protection. - **Advanced Security:** WEP/WPA/WPA2, 802.1X authentication, MAC/IP filtering, VPN (OpenVPN, PPTP, IPsec), and HTTPS management. - **Industrial Design:** IP-30 metal enclosure, DIN-rail and wall-mount options, and wide operating temperature range (-10°C to 60°C). - **Event and Alarm Management:** Syslog, SNMP Trap, Email, Relay output, and Beeper notifications. - **High Reliability:** 1KV isolation for PoE PD port, redundant power, and robust EMI/EMS compliance. - **Comprehensive Management:** Web-based GUI, HTTPS access, SNMP v1/v2, and firmware upgrade capability.

Manufacturer: Oring

Category: 3G/4G Access Point Router