- **CompactPCI 3U Form Factor:** Fully compliant with PICMG 2.11 CompactPCI power interface standard, ensuring interoperability with standard 3U/6U CompactPCI chassis and backplanes. - **Redundant Power Architecture:** Supports dual‑redundant configuration for high‑availability systems; hot‑swappable design allows replacement without system shutdown. - **Input Voltage:** 24 V DC nominal input, designed for industrial DC power environments. - **Output Power:** 150 W total continuous output capacity, optimized for embedded and industrial computing platforms. - **Connector Interface:** Standard 47‑pin Positronic PCIH47M400A1 connector for DC input/output and control signals, ensuring compatibility with ADLINK cBP‑3062 redundant backplane. - **High Reliability:** Industrial‑grade design with over‑voltage, over‑current, and thermal protection; MTBF exceeding 100,000 hours (MIL‑HDBK‑217E). - **Hot‑Swappable Operation:** Enables live insertion and removal in redundant configurations, minimizing downtime. - **Compact and Lightweight:** 3U mechanical envelope (40 mm W × 128.5 mm H × 172.8 mm D) with weight approximately 0.85 kg. - **Comprehensive Protection:** Includes input surge suppression, output short‑circuit protection, and automatic recovery after fault removal. - **Status Indicators:** Front‑panel LEDs for “POWER OK” (green) and “FAULT” (red) provide immediate visual diagnostics. - **Compliance:** Meets international safety and EMC standards (UL 1950, EN 60950, CE Mark, EN 55022 Class A, EN 50082‑2).

Manufacturer: Adlink Technology Inc.

Category: cPCI Power Supplies

- **CompactPCI 3U Form Factor:** Designed for integration into CompactPCI systems, compliant with DIN 41494 Part 5 mechanical standards. - **Wide Input Voltage Range:** Accepts DC input from 8.5 V to 36 V (DG4120 variant), suitable for mobile, industrial, and embedded applications. - **Four Independent Output Voltages:** - +5.1 V / 0–14 A - +3.3 V / 0–14 A - +12 V / 0–2 A - –12 V / 0–1 A - **Total Output Power:** Up to 120 W continuous (DG4150 variants up to 150 W with forced ventilation). - **Galvanic Isolation:** Full isolation between input and output circuits for enhanced safety and noise immunity. - **High Efficiency:** 78–82% typical, depending on load and variant. - **Comprehensive Protection:** - Overvoltage protection (OVP) - Overtemperature protection (OTP) - Short-circuit protection (continuous short-circuit proof outputs) - Inrush current limiting - **Control and Monitoring Interfaces:** - ENABLE (EN) and INHIBIT (INH) TTL control inputs - DERATE (DEG) open-collector signal output for power status and derating indication - **Compliance with EMC and Safety Standards:** - EN 50081-1, EN 50082-2 (EMC) - EN 60950 / VDE 0805 (Safety) - Protection Class I (VDE 0100) - **Mechanical Flexibility:** - 19" rack plug-in module (12TE width, 3U height) - Optional DIN-rail and wall-mounting kits available - **Thermal Management:** Natural convection cooling with derating above +50°C; airflow from bottom to top must remain unobstructed. - **Visual Indicators:** Green LEDs for all four output voltages. - **Robust Construction:** Natural anodized aluminum front panel, approximately 1.0 kg total weight.

Manufacturer: MGV

Category: cPCI Power Supplies