- **32 Opto‑Isolated Digital Output Channels:** Provides 32 independent digital output points, each isolated via opto‑couplers to prevent electrical interference between the PC and external circuits. - **High‑Speed Output Response:** Maximum response time of **1 µs**, enabling precise and rapid control of external devices. - **On‑Board Power Supply:** Integrated power circuitry eliminates the need for an external power source to drive the output opto‑couplers. This simplifies system design and enhances reliability. - **TTL‑Level Output:** Output signal conforms to **5 V DC TTL logic**, with a maximum output current of **6.4 mA per channel**. - **High Isolation Voltage:** Provides up to **5 kV isolation** between the PC bus and external I/O circuits, ensuring robust protection against surges and ground potential differences. - **Compact ISA Form Factor:** Standard ISA bus interface card with dimensions of **160 mm × 122 mm**, suitable for legacy and embedded industrial PC systems. - **Standard 37‑Pin D‑Sub Connector:** Equipped with a **37‑pin female D‑type connector** for easy connection to external devices, terminal blocks, or cable assemblies. - **Industrial‑Grade Design:** Designed for continuous operation in industrial environments with high electrical noise, ensuring stable performance and long service life. - **Software Support:** Compatible with CONTEC’s **API‑TOOL** driver suite for Windows and Linux, and **VI‑DAQ** library for LabVIEW integration.

Manufacturer: Contec

Category: DIO Isolated ISA

- **64 Opto-Isolated Output Channels:** Provides 64 independent open-collector output channels, each optically isolated to prevent electrical interference and protect the host system. - **High Output Capacity:** Supports up to 35VDC and 200mA per channel, suitable for driving relays, lamps, solenoids, and other industrial actuators. - **High Isolation Voltage:** Offers up to 5kV isolation between the PC bus and external I/O circuits, ensuring superior noise immunity and system protection. - **Open Collector Output (Current Sinking Type):** Designed for current sinking output configuration, compatible with a wide range of external loads. - **Surge and Overcurrent Protection:** Built-in Zener diode and current-limiting circuitry protect against voltage surges and overcurrent conditions. - **Low Power Consumption:** Operates on a 5VDC supply with a maximum current draw of approximately 100mA, minimizing system power load. - **Compact Form Factor:** Standard AT card dimensions (160 mm × 122 mm) suitable for legacy and embedded industrial PCs. - **High Noise Immunity:** Opto-coupler isolation ensures reliable operation in electrically noisy environments. - **Standard 96-Pin Half-Pitch Connector:** Provides a high-density connection interface for external wiring, compatible with CONTEC’s accessory cables and terminal blocks. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Industrial-Grade Reliability:** Designed for continuous operation in demanding industrial and laboratory environments.

Manufacturer: Contec

Category: DIO Isolated ISA

- **32 Independent Output Channels:** Provides 32 discrete Photo MOS relay outputs for flexible control of external devices. - **High Voltage and Current Capability:** Supports up to 199 VDC or 199 VAC per channel, with a maximum current of 250 mA per channel. - **Grouped Power Handling:** Each group of 8 channels supports a combined maximum current of 1 A, allowing efficient load distribution. - **Fast Switching Performance:** Typical operation time is less than 1 ms, enabling rapid control response suitable for automation and test systems. - **Optical Isolation:** Each output channel is optically isolated from the control circuitry, protecting the host system from voltage spikes, surges, and ground loops. - **Standardized Connector Interface:** Equipped with a 37-pin D-sub female connector for easy integration with CONTEC cables, terminal blocks, and external devices. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm allow installation in compact control enclosures or PC chassis. - **High Reliability Solid-State Design:** Photo MOS relays provide silent operation, no mechanical wear, and long service life. - **Cross-Platform Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and supports LabVIEW integration via VI-DAQ libraries. - **Industrial-Grade Build:** Designed for continuous operation in industrial environments with robust electrical isolation and surge protection.

Manufacturer: Contec

Category: DIO Isolated ISA

- **32 Independent Reed Relay Outputs:** Provides 32 channels of single-pole, single-throw (SPST) reed relay contacts for flexible control of external devices. - **High Isolation and Reliability:** Each relay contact is isolated from the PC’s internal circuitry, ensuring electrical separation and protection against noise or surges. - **Switching Capacity:** Supports up to 10VA (AC) or 10W (DC) per channel, suitable for low-power signal switching applications. - **Fast Switching Time:** Typical switching response of less than 1 millisecond, enabling rapid control operations. - **Compact Form Factor:** Board dimensions of 160 mm × 122 mm allow installation in standard PC expansion slots. - **Standard 37-pin D-sub Connector:** Equipped with a 37-pin female D-type connector (DCL-J37SAF-20L9 [JAE] or equivalent) for easy external wiring. - **PCI/ISA Bus Compatibility:** Designed for use in PC-based control systems with standard bus interfaces. - **Software Support:** Compatible with CONTEC’s API-TOOL driver suite for Windows and Linux, and VI-DAQ library for LabVIEW integration. - **Long Mechanical Life:** Reed relay contacts rated for up to 200 million operations under nominal load conditions. - **Industrial-Grade Design:** Built for stable operation in factory automation, test systems, and process control environments.

Manufacturer: Contec

Category: DIO Isolated ISA