- **4 Independent Analog Output Channels:** Each channel can be configured individually for voltage or current output. - **High Resolution:** 14‑bit digital‑to‑analog conversion ensures fine output granularity and precise control. - **Multi‑Range Output Support:** - Voltage: 0–5 V, ±5 V, 0–10 V, ±10 V - Current: 0–20 mA, 4–20 mA - **Programmable Slew Rate Control:** Adjustable output slope from 0.0625 V/s to 1024 V/s or 0.125 mA/s to 2048 mA/s for smooth transitions and reduced mechanical stress in actuators. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and fail‑safe behavior. - **Safe Value and Power‑On Value:** User‑definable output states for startup and communication failure conditions. - **Wide Power Supply Range:** Operates from +10 VDC to +30 VDC with typical consumption of 2–2.4 W. - **High Isolation:** 3000 VDC isolation between I/O and communication circuits; 3750 Vrms isolation for digital inputs (EX9024H‑M). - **Extended Temperature Range:** Reliable operation from −25 °C to +75 °C. - **Communication Protocols:** Supports both ASCII and Modbus‑RTU over RS‑485 (2‑wire). - **Flexible Baud Rates:** Selectable from 1200 bps up to 115.2 kbps. - **EEPROM Configuration Storage:** Retains address, baud rate, output type, and other parameters through power cycles. - **INIT* Mode:** Hardware switch or pin for restoring default communication settings and reconfiguration. - **LED Indicators:** Provide visual feedback for power, communication, and channel status. - **Compact Modular Design:** DIN‑rail mountable for distributed I/O systems.

Manufacturer: TOPSCCC

Category: Modules Analog Out

- **Mixed I/O Configuration:** Four analog output (A/O) channels and four single‑ended digital input (D/I) channels in one module, reducing system footprint and wiring complexity. - **High‑Resolution Analog Output:** 14‑bit digital‑to‑analog conversion for precise voltage and current signal generation. - **Multi‑Range Output Support:** Each analog channel can be independently configured for voltage or current output: - Voltage: 0–5 V, ±5 V, 0–10 V, ±10 V - Current: 0–20 mA, 4–20 mA - **Programmable Slew Rate Control:** Adjustable output slope from 0.0625 V/s to 1024 V/s or 0.125 mA/s to 2048 mA/s for smooth signal transitions and reduced mechanical stress on actuators. - **Dual Watchdog System:** Hardware (module) and software (host) watchdogs ensure continuous operation and safe fallback states in case of communication loss or system failure. - **Emergency Interlock Inputs:** Four digital inputs can act as emergency latch interlocks to force analog outputs into predefined safe states. - **Wide Communication Compatibility:** Supports both ASCII and Modbus‑RTU protocols over a 2‑wire RS‑485 interface, with baud rates from 1200 bps to 115.2 kbps. - **High Electrical Isolation:** 3000 VDC isolation between I/O and communication circuits; 3750 Vrms isolation for digital inputs. - **Extended Operating Range:** Designed for industrial environments with wide temperature tolerance and robust noise immunity. - **EEPROM Configuration Storage:** Retains address, baud rate, protocol, and calibration data even after power loss. - **LED Status Indicators:** Provide visual feedback for power, communication, and channel status.

Manufacturer: TOPSCCC

Category: Modules Analog Out