- **True IDE Compatibility:** Fully compliant with the ATA/IDE interface standard; functions as a standard hard disk without additional drivers. - **Compact Module Design:** Vertical 44‑pin form factor minimizes footprint for space‑constrained embedded systems. - **Industrial Grade Reliability:** Operating temperature range 0 °C to +70 °C; non‑operating –20 °C to +85 °C. - **NAND Flash Technology:** High‑density, non‑volatile NAND flash with integrated ECC, wear‑leveling, and defect‑block management. - **Plug‑and‑Play Operation:** Recognized automatically by BIOS as an IDE drive; no special software required. - **Low Power Consumption:** Typical read 21 mA, write 28 mA, sleep 0.3 mA at +5 V DC. - **High Shock and Vibration Tolerance:** No moving parts; ideal for harsh environments. - **Flexible Master/Slave Configuration:** Selectable via jumper (JP1) on 44‑pin models. - **Long Service Life:** MTBF 300 000 rewrite cycles @ 25 °C; data retention ≥ 10 years. - **Broad OS Support:** Compatible with Windows 95/98/NT/2000/CE, Embedded NT, QNX, Linux, and other IDE‑based systems.

Manufacturer: PQI

Category: DOM

1,0GB Fast Flash Disk, IDE interface, 2,5" form factor

Manufacturer: PQI

Category: DOM 2,5"

2,0GB Fast Flash Disk, IDE interface, 2,5" form factor

Manufacturer: PQI

Category: DOM 2,5"

4,0GB Fast Flash Disk, IDE interface, 2,5" form factor

Manufacturer: PQI

Category: DOM 2,5"

- **True IDE Compatibility:** Fully compliant with the 44‑pin IDE/ATA interface standard; operates as a standard hard disk without special drivers. - **Non‑volatile NAND Flash Storage:** Utilizes NAND‑type flash memory with electronic erase and re‑write capability exceeding 1,000,000 program/erase cycles. - **High Reliability Architecture:** Incorporates ECC (Error Correction Code), defect block management, and wear‑leveling algorithms to ensure data integrity and extended lifespan. - **Fast Access Performance:** Typical read speed 2.2 MB/s, write speed 1.3 MB/s, with average seek time under 0.1 ms. - **Low Power Operation:** Operates from a single +5 V ± 10 % supply; typical read current 18 mA, write current 90 mA, idle 8 mA. - **Rugged Design:** No moving parts, silent operation, and high resistance to shock (150 G) and vibration (15 G p‑p). - **Plug‑and‑Play Installation:** Recognized automatically by BIOS as an IDE drive; supports auto‑detection or manual CHS configuration. - **Broad OS Support:** Compatible with Windows 95/98/NT/2000, Windows CE, Embedded NT, QNX, and Linux. - **Compact 2.5‑inch Form Factor:** Standard 102.3 × 70.0 × 11.2 mm dimensions, 100 g weight, suitable for space‑constrained systems. - **Extended Environmental Range:** Operates from 0 °C to 70 °C (standard) or −20 °C to 80 °C (extended version).

Manufacturer: PQI

Category: DOM 2,5"

- **True IDE Compatibility:** Fully compliant with 44‑pin IDE/ATA interface standards; operates as a standard hard disk without special drivers. - **High Reliability Flash Architecture:** Utilizes NAND‑type flash memory with integrated DSP‑based controller, ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms. - **Fast Access Performance:** Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, burst transfer up to 16.67 MB/s (PIO Mode 4). Average seek time 

Manufacturer: PQI

Category: DOM 2,5"

- **True IDE Compatibility:** Fully compliant with the ATA/IDE interface standard; operates as a standard hard disk without special drivers. - **Plug‑and‑Play Installation:** Recognized automatically by BIOS and operating systems supporting IDE devices. - **High Reliability Flash Management:** Incorporates advanced defect block management, wear‑leveling algorithms, and built‑in ECC (Error Correction Code) to ensure data integrity and extended lifespan. - **Fast Access Time:** Average seek time below 0.1 ms; typical read/write access times of 0.18–0.25 ms. - **Low Power Operation:** Operates from a single +5 V ± 10 % supply; consumes less than 100 mA during write operations. - **Rugged Design:** No moving parts, silent operation, and high resistance to shock (150 G) and vibration (15 G p‑p). - **Wide OS Support:** Compatible with Windows 95/98/NT/2000, Windows CE, Embedded NT, QNX, and Linux. - **Extended Temperature Option:** Available in extended‑temperature versions (–20 °C to +80 °C). - **Compact 2.5‑inch Form Factor:** Matches standard notebook HDD dimensions for easy integration. - **Long Data Retention:** Flash memory retains data for ≥ 10 years without external power.

Manufacturer: PQI

Category: DOM 2,5"

- **True IDE Compatibility:** Fully compliant with 40‑pin and 44‑pin IDE/ATA interface standards; functions as a standard hard disk without special drivers. - **High Reliability Flash Architecture:** Utilizes NAND‑type flash memory with built‑in ECC (Error Correction Code), defect‑block management, and wear‑leveling algorithms to ensure data integrity and extended endurance. - **Fast Access Performance:** Typical read speed ≈ 2.2 MB/s, write speed ≈ 1.3 MB/s, with average seek time  1,000,000 cycles; MTBF ≈ 1,000,000 hours (@ 25 °C). - **Compact Form Factor:** Standard 2.5‑inch HDD dimensions (102.3 × 70.0 × 11.2 mm); weight ≈ 100 g.

Manufacturer: PQI

Category: DOM 2,5"

- **Capacity Range:** 32 MB – 2 GB (model CF‑0010G‑044x = 1 GB) - **Interface Compatibility:** - Fully compliant with **CompactFlash® Specification** - **PCMCIA v2.1** and **PC Card ATA v2.01** compatible - 50‑pin SMT connector, **Type I (3.3 mm thickness)** - **Operating Voltage:** Single 3.3 V / 5 V supply - **Controller Technology:** TDK GBDriver flash memory controller - **Operating Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for ATA/IDE host compatibility) - **Self‑Diagnostics:** Internal self‑test executed automatically at power‑on - **Error Correction:** Built‑in **ECC (Error Correcting Code)** engine - Data reliability: 1 bit error per 10¹⁴ bits read - **Endurance and Reliability:** - **MTBF:** 1,000,000 hours - **Erase/Program Cycles:** 2,000,000 cycles - **Performance:** - Read speed: 4.0 MB/s (32–64 MB models), 4.1 MB/s (128 MB–2 GB models) - Write speed: 1.5 MB/s (32–64 MB), 3.5 MB/s (128 MB–2 GB) - **Power Consumption:** - Active: 24.1 mA @ 3.3 V / 26.5 mA @ 5 V - Sleep: 200 µA @ 3.3 V / 300 µA @ 5 V - **Temperature Range:** 0 °C to +70 °C (commercial/industrial operating range) - **Boot Mode Options:** - **Fixed Mode (045A)** – recognized as a fixed disk for OS booting - **Removable Mode (848A)** – recognized as removable media - Fixed mode recommended for Windows XP and similar systems that restrict booting from removable devices. - **Form Factor:** CompactFlash Type I, 50‑pin connector - **High Compatibility:** Works with CF slots in PCs, industrial controllers, and digital cameras.

Manufacturer: PQI

Category: CF Cards

- **Storage Capacity:** Available from 32MB up to 2GB; this model provides 2GB. - **Interface Compatibility:** Fully compliant with CompactFlash™ Specification, PCMCIA Ver. 2.1, and PC Card ATA Ver. 2.01. - **Connector Type:** 50-pin surface-mount (SMT) connector, Type I form factor (3.3 mm thickness). - **Power Supply:** Operates on a single 3.3V or 5V supply. - **Operating Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for direct ATA interface compatibility) - **Controller Technology:** TDK GBDriver flash memory controller for enhanced data integrity and wear-leveling. - **Error Correction:** Built-in ECC (Error Correcting Code) with data reliability of 1 error per 10¹⁴ bits read. - **Endurance:** 2,000,000 erase/program cycles per block. - **MTBF:** 1,000,000 hours (Mean Time Between Failures). - **Performance:** - Read Speed: 4.0 MB/s (32–64MB models), 4.1 MB/s (128MB–2GB models) - Write Speed: 1.5 MB/s (32–64MB models), 3.5 MB/s (128MB–2GB models) - **Power Consumption:** - Active Mode: 24.1 mA @ 3.3V / 26.5 mA @ 5.0V - Sleep Mode: 200 µA @ 3.3V / 300 µA @ 5.0V - **Temperature Range:** 0°C to +70°C (operating). - **Self-Diagnostics:** Internal self-test routine executes automatically at power-on. - **Boot Mode Configuration:** Supports both Fixed Disk Mode (045A) and Removable Disk Mode (848A). Fixed mode enables system boot compatibility with operating systems such as Windows XP. - **Reliability:** Industrial-grade design for continuous operation and data retention stability.

Manufacturer: PQI

Category: CF Cards

- **Storage Capacity:** 32MB (available range: 32MB to 2GB across the AC31 series) - **Interface Compatibility:** Fully compliant with CompactFlash™ Specification, PCMCIA Ver. 2.1, and PC Card ATA Ver. 2.01 - **Connector Type:** 50-pin surface-mount (SMT) connector, Type I (3.3mm thickness) - **Power Supply:** Operates on a single 3.3V or 5V power source - **Access Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for ATA/IDE compatibility) - **Controller Technology:** TDK GBDriver flash memory controller for enhanced data integrity and wear-leveling - **Error Correction:** Built-in ECC (Error Correcting Code) with data reliability of 1 error per 10¹⁴ bits read - **Performance:** - Read Speed: 4.0 MB/s (32–64MB models), 4.1 MB/s (128MB–2GB models) - Write Speed: 1.5 MB/s (32–64MB models), 3.5 MB/s (128MB–2GB models) - **Reliability:** - MTBF: 1,000,000 hours - Endurance: 2,000,000 erase/program cycles - **Power Consumption:** - Active Mode: 24.1mA (3.3V) / 26.5mA (5.0V) - Sleep Mode: 200µA (3.3V) / 300µA (5.0V) - **Operating Temperature:** 0°C to +70°C - **Self-Diagnostics:** Internal self-test executed at power-on - **Boot Mode Configuration:** Supports both Fixed Disk Mode (045A) and Removable Disk Mode (848A) for system compatibility - **High Compatibility:** Works with PCs, industrial controllers, and digital still cameras equipped with CF slots

Manufacturer: PQI

Category: CF Cards

- **Storage Capacity:** 64MB (available range: 32MB to 2GB across the series) - **Interface Compatibility:** - Compliant with CompactFlash™ Specification - PCMCIA Version 2.1 and PC Card ATA Version 2.01 compatible - 50-pin surface-mount (SMT) connector, Type I (3.3mm thickness) - **Operating Voltage:** Single 3.3V or 5V power supply - **Controller Technology:** TDK GBDriver flash memory controller - **Flash Memory Type:** NAND Flash - **Access Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for direct ATA interface compatibility) - **Reliability Features:** - Built-in ECC (Error Correcting Code) for data integrity - Data reliability: 1 error per 10¹⁴ bits read - MTBF (Mean Time Between Failures): 1,000,000 hours - Endurance: 2,000,000 erase/program cycles - **Performance:** - Read Speed: 4.0 MB/s (32–64MB models), 4.1 MB/s (128MB–2GB models) - Write Speed: 1.5 MB/s (32–64MB models), 3.5 MB/s (128MB–2GB models) - **Power Consumption:** - Active Mode: 24.1 mA (3.3V) / 26.5 mA (5.0V) - Sleep Mode: 200 µA (3.3V) / 300 µA (5.0V) - **Operating Temperature Range:** 0°C to +70°C - **Self-Diagnostics:** Internal self-test routine at power-on - **Boot Mode Configuration:** - Fixed Mode (045A) for system boot compatibility - Removable Mode (848A) for standard removable storage use - Fixed mode recommended for Windows XP boot operations

Manufacturer: PQI

Category: CF Cards

- **Storage Capacity:** 128MB (available range: 32MB to 2GB across series) - **Interface Compatibility:** - CompactFlash™ Specification compliant - PCMCIA Version 2.1 and PC Card ATA Version 2.01 compatible - 50-pin SMT connector, Type I (3.3mm thickness) - **Operating Voltage:** Single 3.3V or 5V power supply - **Controller Technology:** TDK GBDriver flash memory controller - **Flash Type:** NAND flash memory - **Access Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode - **Reliability Features:** - Built-in ECC (Error Correcting Code) for data integrity - Data reliability: 1 error per 10¹⁴ bits read - MTBF: 1,000,000 hours - Endurance: 2,000,000 erase/program cycles - **Performance:** - Read Speed: 4.1 MB/s (for 128MB–2GB models) - Write Speed: 3.5 MB/s (for 128MB–2GB models) - **Power Consumption:** - Active Mode: 24.1mA @ 3.3V / 26.5mA @ 5.0V - Sleep Mode: 200µA @ 3.3V / 300µA @ 5.0V - **Operating Temperature:** 0°C to +70°C - **Self-Diagnostics:** Internal self-test routine at power-on - **Boot Mode Options:** - Fixed Disk Mode (045A) for system boot compatibility - Removable Disk Mode (848A) for portable storage use

Manufacturer: PQI

Category: CF Cards

- **Capacity Range:** Available from 32MB up to 2GB; this model provides 256MB of non-volatile NAND flash storage. - **Interface Compatibility:** Fully compliant with CompactFlash™ Specification, PCMCIA Ver. 2.1, and PC Card ATA Ver. 2.01. - **Connector Type:** 50-pin surface-mount (SMT) connector, Type I form factor (3.3mm thickness). - **Power Supply:** Operates on a single 3.3V or 5V power source. - **Operating Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode (for direct ATA interface compatibility) - **Controller Technology:** TDK GBDriver flash memory controller for stable operation and advanced error management. - **Error Correction:** Built-in ECC (Error Correcting Code) with data reliability of 1 error per 10¹⁴ bits read. - **Endurance:** Up to 2,000,000 program/erase cycles. - **MTBF (Mean Time Between Failures):** 1,000,000 hours. - **Temperature Range:** 0°C to +70°C (standard operating range). - **Performance:** - Read Speed: 4.0 MB/s (32–64MB models), 4.1 MB/s (128MB–2GB models) - Write Speed: 1.5 MB/s (32–64MB models), 3.5 MB/s (128MB–2GB models) - **Power Consumption:** - Active Mode: 24.1 mA @ 3.3V / 26.5 mA @ 5.0V - Sleep Mode: 200 µA @ 3.3V / 300 µA @ 5.0V - **Self-Diagnostics:** Internal self-test program executes automatically at power-on. - **Boot Mode Configuration:** Supports both Fixed Disk Mode (045A) and Removable Disk Mode (848A). Fixed mode enables system boot compatibility with operating systems such as Windows XP. - **High Reliability:** Designed for industrial use with robust data retention and consistent performance under continuous operation.

Manufacturer: PQI

Category: CF Cards

- **Capacity Range:** 32 MB to 2 GB (model CF‑0512M‑044x provides 512 MB). - **Interface Compatibility:** - CompactFlash™ Specification compliant - PCMCIA Version 2.1 and PC Card ATA Version 2.01 compatible - 50‑pin surface‑mount (SMT) connector, Type I form factor (3.3 mm thickness) - **Operating Voltage:** Single 3.3 V / 5 V power supply. - **Controller Technology:** TDK GBDriver flash memory controller with integrated ECC (Error Correcting Code). - **Error Correction:** Internal ECC ensures data reliability of 1 bit error per 10¹⁴ bits read. - **Operating Temperature Range:** 0 °C to +70 °C. - **Mean Time Between Failures (MTBF):** 1,000,000 hours. - **Endurance:** 2,000,000 erase/program cycles. - **Power Consumption:** - Active mode: 24.1 mA @ 3.3 V / 26.5 mA @ 5.0 V - Sleep mode: 200 µA @ 3.3 V / 300 µA @ 5.0 V - **Performance:** - Read speed: 4.0 MB/s (32–64 MB models), 4.1 MB/s (128 MB–2 GB models) - Write speed: 1.5 MB/s (32–64 MB models), 3.5 MB/s (128 MB–2 GB models) - **Access Modes:** - Memory Card Mode - I/O Card Mode - True IDE Mode - **Self‑Diagnostics:** Internal self‑test executed automatically at power‑on. - **Boot Mode Configuration:** Supports both Fixed Disk Mode (045A) and Removable Disk Mode (848A). Fixed mode enables system boot compatibility with operating systems such as Windows XP. - **High Reliability:** Industrial‑grade NAND flash memory for stable operation in embedded and automation systems.

Manufacturer: PQI

Category: CF Cards

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 1GB solid-state storage using NAND flash memory. - **Form Factor:** Vertical module design for direct motherboard connection without additional cabling. - **Compact Design:** Space-saving vertical orientation ideal for embedded systems with limited board space. - **Solid-State Reliability:** No moving parts, ensuring high shock and vibration resistance compared to mechanical drives. - **Low Power Consumption:** Optimized for energy-efficient operation in always-on or battery-powered systems. - **High Data Integrity:** Integrated error correction code (ECC) and wear-leveling algorithms to extend flash lifespan. - **Bootable Device:** Fully bootable as a primary or secondary storage device in compatible systems. - **Industrial Temperature Range (optional):** Designed for stable operation in harsh environments (typical range: -40°C to +85°C, depending on variant). - **Plug-and-Play Compatibility:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **RoHS Compliant:** Environmentally friendly construction meeting Restriction of Hazardous Substances standards.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 1GB solid-state storage capacity suitable for embedded OS and data logging applications. - **Form Factor:** Vertical module design optimized for space-constrained systems and vertical mounting configurations. - **Temperature Range:** Industrial-grade operating temperature from -40°C to +85°C for reliable performance in extreme environments. - **Flash Type:** Utilizes high-endurance NAND flash memory for long lifecycle and data integrity. - **Power Efficiency:** Low power consumption suitable for embedded and portable systems. - **Shock and Vibration Resistance:** Solid-state design with no moving parts, providing superior resistance to mechanical stress. - **Data Reliability:** Incorporates advanced wear-leveling, bad block management, and ECC (Error Correction Code) for data integrity. - **Compatibility:** Fully compatible with legacy IDE/PATA interfaces, supporting both master and slave configurations. - **Plug-and-Play Operation:** No additional drivers required for most operating systems supporting IDE storage devices. - **Industrial Durability:** Designed for continuous operation in mission-critical and industrial automation systems.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard - **Capacity:** 2GB solid-state storage - **Form Factor:** Vertical module design for space-constrained installations - **Flash Type:** Industrial-grade NAND flash memory (typically SLC or MLC depending on configuration) - **High Reliability:** No moving parts, resistant to shock and vibration - **Low Power Consumption:** Ideal for fanless and low-power embedded systems - **Fast Data Access:** Reduced latency compared to mechanical drives - **Wide Compatibility:** Supports legacy IDE controllers and BIOS configurations - **Durability:** Extended operational life with advanced wear-leveling and bad block management - **Operating Temperature Range:** Typically supports industrial temperature ranges (e.g., -40°C to +85°C, depending on model variant) - **Data Integrity:** ECC (Error Correction Code) support for reliable data retention - **Plug-and-Play Operation:** No additional drivers required for standard IDE environments - **Compact Design:** Vertical connector orientation minimizes footprint on the motherboard

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Capacity:** 2GB solid-state storage capacity optimized for embedded and industrial applications. - **Form Factor:** Vertical module design for space-constrained systems and vertical mounting configurations. - **Operating Temperature Range:** Industrial-grade temperature tolerance from -40°C to +85°C, ensuring stable operation in harsh environments. - **Flash Type:** NAND Flash memory with advanced wear-leveling and error correction algorithms for extended lifespan. - **Data Integrity:** Built-in ECC (Error Correction Code) and bad block management to ensure data reliability. - **Power Management:** Low power consumption suitable for embedded systems and fanless industrial PCs. - **Shock and Vibration Resistance:** Solid-state design with no moving parts, providing high resistance to mechanical shock and vibration. - **Compatibility:** Fully compatible with legacy IDE/PATA interfaces, supporting standard ATA command sets. - **Reliability:** Designed for 24/7 operation in mission-critical applications such as automation, networking, and industrial control. - **Maintenance-Free Operation:** No mechanical components, reducing failure rates and maintenance requirements. - **RoHS Compliance:** Environmentally friendly design meeting Restriction of Hazardous Substances standards.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Storage Capacity:** 4GB solid-state flash memory. - **Form Factor:** Vertical module design for space-constrained systems. - **Solid-State Reliability:** No moving parts, ensuring high resistance to mechanical shock, vibration, and temperature fluctuations. - **High Data Integrity:** Advanced error correction code (ECC) and wear-leveling algorithms extend product lifespan and data reliability. - **Low Power Consumption:** Ideal for embedded and industrial applications where energy efficiency is critical. - **Plug-and-Play Compatibility:** Direct replacement for traditional 2.5" IDE hard drives in compatible systems. - **Industrial-Grade Durability:** Designed for continuous operation in harsh environments, including automation, transportation, and industrial control systems. - **Vertical Connector Orientation:** Optimized for systems with limited horizontal clearance, allowing efficient use of vertical space. - **Long Product Lifecycle:** Stable component sourcing and firmware support for long-term industrial deployments.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standard. - **Storage Capacity:** 4GB solid-state flash memory. - **Form Factor:** Vertical module design for space-constrained systems. - **Operating Temperature Range:** -40°C to +85°C, suitable for industrial and outdoor applications. - **Solid-State Design:** No moving parts, ensuring shock and vibration resistance. - **High Reliability:** Industrial-grade NAND flash memory for extended endurance and data retention. - **Low Power Consumption:** Optimized for embedded systems and fanless industrial PCs. - **Plug-and-Play Compatibility:** Fully compatible with legacy IDE controllers and BIOS configurations. - **Enhanced Data Integrity:** Integrated ECC (Error Correction Code) and wear-leveling algorithms. - **Long Product Lifecycle:** Designed for long-term supply stability and consistent performance. - **RoHS Compliance:** Environmentally friendly construction with lead-free materials.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-6 standards. - **Storage Capacity:** 8GB solid-state flash memory. - **Form Factor:** Vertical module design (PE33-V) for compact system integration. - **Solid-State Reliability:** No moving parts, offering enhanced durability, shock resistance, and long operational life compared to mechanical drives. - **High Compatibility:** Fully compatible with legacy IDE interfaces used in industrial controllers, embedded systems, and older computing platforms. - **Low Power Consumption:** Optimized for energy-efficient operation, suitable for fanless and low-power embedded systems. - **Fast Data Access:** Provides faster read/write access times than traditional HDDs, improving system responsiveness. - **Industrial-Grade Design:** Built for continuous operation in harsh environments with wide temperature tolerance and resistance to vibration and shock. - **Plug-and-Play Integration:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **Vertical Orientation:** Ideal for systems with limited horizontal space or where vertical mounting improves airflow and cable management. - **Data Integrity Features:** Incorporates wear-leveling, bad block management, and error correction code (ECC) to ensure data reliability and extended lifespan. - **Maintenance-Free Operation:** No mechanical wear, reducing maintenance requirements and downtime.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI-7 standard. - **Capacity:** 8GB solid-state storage capacity using high-quality NAND flash memory. - **Form Factor:** Vertical 40-pin module design for direct motherboard or backplane connection. - **Temperature Range:** Industrial-grade operation from **-40°C to +85°C**, ensuring reliability in harsh environments. - **Shock and Vibration Resistance:** Solid-state design with no moving parts, providing superior resistance to mechanical shock and vibration compared to traditional HDDs. - **Low Power Consumption:** Optimized for embedded systems with limited power budgets. - **High Data Integrity:** Incorporates advanced error correction code (ECC) and wear-leveling algorithms to extend lifespan and maintain data reliability. - **Plug-and-Play Compatibility:** Fully compatible with legacy IDE interfaces, allowing seamless integration into older systems without additional drivers. - **Vertical Orientation:** Space-saving vertical connector layout ideal for compact enclosures and vertically mounted boards. - **Industrial Durability:** Designed for 24/7 operation in mission-critical applications. - **RoHS Compliance:** Environmentally friendly design meeting Restriction of Hazardous Substances standards.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** Standard 40-pin IDE (PATA) interface, compatible with ATA/ATAPI standards. - **Storage Capacity:** 128MB solid-state flash memory. - **Form Factor:** Vertical module design for space-efficient installation on motherboards or embedded boards. - **Solid-State Reliability:** No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations. - **Low Power Consumption:** Optimized for embedded systems and industrial controllers where energy efficiency is critical. - **Plug-and-Play Compatibility:** Directly connects to standard 40-pin IDE connectors without additional adapters. - **Bootable Device:** Can serve as a primary boot drive for embedded operating systems or firmware environments. - **Durability:** Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems. - **Data Integrity:** Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time. - **Compact Design:** Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.

Manufacturer: PQI

Category: DOC M-Systems

- **Interface:** 40-pin IDE (PATA) interface compliant with ATA/ATAPI standards. - **Capacity:** 128MB solid-state storage capacity. - **Form Factor:** Vertical module design for compact system integration. - **Temperature Range:** Industrial-grade operating temperature from **-40°C to +85°C**, ensuring reliable performance in harsh environments. - **Solid-State Design:** No moving parts, providing high shock and vibration resistance compared to traditional HDDs. - **Compatibility:** Fully compatible with legacy IDE-based systems, embedded controllers, and industrial PCs. - **Low Power Consumption:** Optimized for energy-efficient operation in embedded and portable systems. - **High Reliability:** Incorporates wear-leveling, bad block management, and error correction code (ECC) for data integrity. - **Plug-and-Play Operation:** Direct connection to IDE interface without additional drivers in most operating systems. - **Vertical Orientation:** Designed for vertical mounting to save board space and improve airflow in compact enclosures.

Manufacturer: PQI

Category: DOC M-Systems