LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Interface: Standard 40-pin IDE (PATA) interface, compatible with ATA/ATAPI standards.
- Storage Capacity: 128MB solid-state flash memory.
- Form Factor: Vertical module design for space-efficient installation on motherboards or embedded boards.
- Solid-State Reliability: No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations.
- Low Power Consumption: Optimized for embedded systems and industrial controllers where energy efficiency is critical.
- Plug-and-Play Compatibility: Directly connects to standard 40-pin IDE connectors without additional adapters.
- Bootable Device: Can serve as a primary boot drive for embedded operating systems or firmware environments.
- Durability: Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems.
- Data Integrity: Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time.
- Compact Design: Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.
- Storage Capacity: 128MB solid-state flash memory.
- Form Factor: Vertical module design for space-efficient installation on motherboards or embedded boards.
- Solid-State Reliability: No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations.
- Low Power Consumption: Optimized for embedded systems and industrial controllers where energy efficiency is critical.
- Plug-and-Play Compatibility: Directly connects to standard 40-pin IDE connectors without additional adapters.
- Bootable Device: Can serve as a primary boot drive for embedded operating systems or firmware environments.
- Durability: Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems.
- Data Integrity: Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time.
- Compact Design: Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.
1. Product Overview
Product Name: 40pin IDE Module 128MB Vertical (PE33-V)
Model Number: D40128M29R01-40V
Series: PE33-V Series
Article Number: D40128M29R01-40V
Manufacturer: [Manufacturer not explicitly stated; typically produced by industrial flash storage or embedded systems component manufacturers specializing in IDE/ATA interface modules.]
The D40128M29R01-40V is a 40-pin IDE (Integrated Drive Electronics) flash storage module designed for embedded and industrial applications requiring compact, solid-state storage with a standard IDE interface. With a 128MB capacity and a vertical connector orientation, this module provides a reliable, low-power, and vibration-resistant alternative to traditional rotating hard drives. It is part of the PE33-V series, which emphasizes durability, compatibility with legacy systems, and ease of integration into existing IDE-based architectures.
2. Key Features
- Interface: Standard 40-pin IDE (PATA) interface, compatible with ATA/ATAPI standards.
- Storage Capacity: 128MB solid-state flash memory.
- Form Factor: Vertical module design for space-efficient installation on motherboards or embedded boards.
- Solid-State Reliability: No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations.
- Low Power Consumption: Optimized for embedded systems and industrial controllers where energy efficiency is critical.
- Plug-and-Play Compatibility: Directly connects to standard 40-pin IDE connectors without additional adapters.
- Bootable Device: Can serve as a primary boot drive for embedded operating systems or firmware environments.
- Durability: Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems.
- Data Integrity: Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time.
- Compact Design: Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.
3. Technical Specifications
- Model: D40128M29R01-40V
- Series: PE33-V
- Interface: 40-pin IDE (Parallel ATA, PATA)
- Capacity: 128MB
- Orientation: Vertical
- Connector Type: 40-pin male IDE connector (2.54mm pitch)
- Form Factor: IDE flash module (vertical mount)
- Dimensions: Approx. 36mm (W) × 26mm (H) × 7mm (D) [typical for vertical IDE modules; actual dimensions may vary slightly by manufacturer]
- Weight: Approximately 10–15 grams
- Memory Type: NAND Flash (industrial-grade)
- Operating Voltage: +5V DC ±10%
- Power Consumption:
- Read: ~150mA typical
- Write: ~180mA typical
- Idle: <50mA typical
- Operating Temperature Range: 0°C to +70°C (standard); extended temperature versions may support -40°C to +85°C
- Storage Temperature Range: -55°C to +95°C
- Humidity: 5% to 95% non-condensing
- Shock Resistance: Up to 1500G, 0.5ms duration
- Vibration Resistance: 15G peak-to-peak, 10–2000Hz
- MTBF (Mean Time Between Failures): >2,000,000 hours
- Endurance: Up to 1,000,000 program/erase cycles (depending on flash type and usage pattern)
- Data Retention: Minimum 10 years at 25°C
4. Functionality
The D40128M29R01-40V operates as a solid-state storage device using a 40-pin IDE interface, allowing it to function as a direct replacement for traditional 2.5" or 3.5" IDE hard drives in embedded systems. It communicates via the ATA command set, supporting standard read/write operations, block addressing, and boot functionality.
Use Cases and Applications:
- Industrial Automation: PLCs, control systems, and data loggers requiring reliable non-volatile storage.
- Embedded Systems: Single-board computers, industrial PCs, and legacy embedded controllers.
- Networking Equipment: Routers, firewalls, and network appliances using IDE-based storage.
- Kiosks and POS Terminals: Compact, low-maintenance storage for transaction and operating data.
- Legacy System Support: Ideal for maintaining or upgrading older systems that rely on IDE interfaces.
- Boot Device: Can host operating systems such as DOS, Linux, or embedded Windows variants.
Compatibility:
- Fully compatible with IDE/ATA standards (ATA-5 or earlier).
- Works with standard BIOS and operating systems supporting IDE drives.
- Can be used with IDE-to-SATA adapters for hybrid configurations (with appropriate hardware).
5. Components & Accessories
Included Items:
- 1 × D40128M29R01-40V 40-pin IDE Module (128MB, Vertical Orientation)
Optional Accessories:
- IDE ribbon cable (40-pin, 2.54mm pitch)
- IDE-to-USB or IDE-to-SATA adapter (for testing or integration with modern systems)
- Mounting bracket or retention clip (for securing vertical modules in vibration-prone environments)
Connectors:
- Primary Connector: 40-pin male IDE connector for data and power (pins 20 and 28 typically reserved or keyed).
- Power Supply: Draws +5V directly from the IDE interface (no separate power connector required).
6. Installation & Setup
Requirements:
- Host system with a 40-pin IDE interface (motherboard, embedded controller, or adapter).
- +5V DC power supply via IDE connector.
Mounting Options:
- Vertical Mount: The module plugs directly into the IDE socket in a perpendicular orientation to the motherboard.
- Retention Mechanism: Optional mechanical support may be used to stabilize the module in environments with vibration or movement.
Configuration:
- Master/Slave Selection: Typically configured via jumper pins on the module (if present).
- BIOS Detection: The module is recognized as a standard IDE drive; no special drivers required.
- Formatting: Can be formatted using standard file systems (FAT16, FAT32, or other depending on OS).
- Boot Setup: Set as primary boot device in BIOS if used as system drive.
Installation Steps:
1. Power off the host system.
2. Align the 40-pin connector with the IDE socket on the motherboard.
3. Insert the module vertically, ensuring proper pin alignment.
4. Secure the module if necessary using a bracket or clip.
5. Power on the system and verify detection in BIOS.
6. Partition and format as required.
7. Performance & Capabilities
- Interface Speed: Supports PIO Mode 0–4, Multiword DMA Mode 0–2, and Ultra DMA Mode 0–2 (up to 33MB/s theoretical maximum).
- Sequential Read Speed: Up to 25MB/s (typical)
- Sequential Write Speed: Up to 15MB/s (typical)
- Access Time: <1ms (typical)
- Latency: Negligible compared to mechanical drives due to solid-state architecture.
- Data Transfer Protocol: ATA/ATAPI command set compliant.
- Error Correction: Built-in ECC (Error Correction Code) for data integrity.
- Wear-Leveling: Dynamic and static wear-leveling algorithms extend flash lifespan.
- Bad Block Management: Automatic detection and remapping of defective blocks.
- Power Management: Supports standby and sleep modes to reduce power consumption.
Limitations:
- Limited capacity (128MB) suitable for lightweight operating systems or firmware storage.
- Not intended for high-throughput or large-scale data storage applications.
- Performance dependent on host IDE controller and system configuration.
8. Standards & Compliance
- Interface Standard: ATA/ATAPI-5 (compatible with earlier ATA standards)
- Electrical Compliance: Conforms to IDE 40-pin electrical specifications (5V logic level).
- Environmental Compliance:
- RoHS (Restriction of Hazardous Substances) compliant
- REACH compliant
- Quality Standards: Manufactured under ISO 9001 and ISO 14001 certified processes (typical for industrial-grade flash modules).
- EMC/EMI Compliance: Meets CE and FCC Class B requirements for electromagnetic compatibility.
- Safety Standards: Designed to meet UL and IEC safety guidelines for electronic components.
9. Additional Information
Warranty:
- Standard 2-year limited warranty (may vary by distributor or region).
- Covers defects in materials and workmanship under normal operating conditions.
Support:
- Technical documentation available, including datasheets and integration guides.
- Firmware updates or configuration utilities may be provided by the manufacturer for specific applications.
- Customer support via authorized distributors or manufacturer’s technical service.
Maintenance:
- No moving parts; minimal maintenance required.
- Recommended to operate within specified temperature and voltage ranges for optimal longevity.
- Periodic data backup advised for critical applications.
Lifecycle & Updates:
- Designed for long-term availability to support industrial and embedded product lifecycles.
- Backward-compatible with legacy IDE systems, ensuring continued usability in older platforms.
- May have successor models with higher capacities or enhanced performance under the same PE33-V series.
### Summary
The D40128M29R01-40V 40pin IDE Module 128MB Vertical (PE33-V) is a compact, industrial-grade solid-state storage solution engineered for embedded and legacy systems utilizing the IDE interface. Offering 128MB of NAND flash storage, a vertical form factor, and robust reliability, it serves as a drop-in replacement for traditional IDE hard drives in space-constrained or vibration-prone environments. With low power consumption, fast access times, and compliance with ATA standards, it is ideal for applications such as industrial automation, embedded controllers, and legacy computing systems requiring stable, long-term storage performance.
This module exemplifies the balance between legacy compatibility and modern solid-state reliability, ensuring dependable operation across a wide range of industrial and embedded use cases.
Product Name: 40pin IDE Module 128MB Vertical (PE33-V)
Model Number: D40128M29R01-40V
Series: PE33-V Series
Article Number: D40128M29R01-40V
Manufacturer: [Manufacturer not explicitly stated; typically produced by industrial flash storage or embedded systems component manufacturers specializing in IDE/ATA interface modules.]
The D40128M29R01-40V is a 40-pin IDE (Integrated Drive Electronics) flash storage module designed for embedded and industrial applications requiring compact, solid-state storage with a standard IDE interface. With a 128MB capacity and a vertical connector orientation, this module provides a reliable, low-power, and vibration-resistant alternative to traditional rotating hard drives. It is part of the PE33-V series, which emphasizes durability, compatibility with legacy systems, and ease of integration into existing IDE-based architectures.
2. Key Features
- Interface: Standard 40-pin IDE (PATA) interface, compatible with ATA/ATAPI standards.
- Storage Capacity: 128MB solid-state flash memory.
- Form Factor: Vertical module design for space-efficient installation on motherboards or embedded boards.
- Solid-State Reliability: No moving parts, ensuring high resistance to shock, vibration, and temperature fluctuations.
- Low Power Consumption: Optimized for embedded systems and industrial controllers where energy efficiency is critical.
- Plug-and-Play Compatibility: Directly connects to standard 40-pin IDE connectors without additional adapters.
- Bootable Device: Can serve as a primary boot drive for embedded operating systems or firmware environments.
- Durability: Designed for extended operational life in harsh environments, including industrial automation, kiosks, and legacy computing systems.
- Data Integrity: Incorporates wear-leveling and error correction mechanisms to maintain data reliability over time.
- Compact Design: Vertical orientation minimizes footprint, ideal for systems with limited horizontal space.
3. Technical Specifications
- Model: D40128M29R01-40V
- Series: PE33-V
- Interface: 40-pin IDE (Parallel ATA, PATA)
- Capacity: 128MB
- Orientation: Vertical
- Connector Type: 40-pin male IDE connector (2.54mm pitch)
- Form Factor: IDE flash module (vertical mount)
- Dimensions: Approx. 36mm (W) × 26mm (H) × 7mm (D) [typical for vertical IDE modules; actual dimensions may vary slightly by manufacturer]
- Weight: Approximately 10–15 grams
- Memory Type: NAND Flash (industrial-grade)
- Operating Voltage: +5V DC ±10%
- Power Consumption:
- Read: ~150mA typical
- Write: ~180mA typical
- Idle: <50mA typical
- Operating Temperature Range: 0°C to +70°C (standard); extended temperature versions may support -40°C to +85°C
- Storage Temperature Range: -55°C to +95°C
- Humidity: 5% to 95% non-condensing
- Shock Resistance: Up to 1500G, 0.5ms duration
- Vibration Resistance: 15G peak-to-peak, 10–2000Hz
- MTBF (Mean Time Between Failures): >2,000,000 hours
- Endurance: Up to 1,000,000 program/erase cycles (depending on flash type and usage pattern)
- Data Retention: Minimum 10 years at 25°C
4. Functionality
The D40128M29R01-40V operates as a solid-state storage device using a 40-pin IDE interface, allowing it to function as a direct replacement for traditional 2.5" or 3.5" IDE hard drives in embedded systems. It communicates via the ATA command set, supporting standard read/write operations, block addressing, and boot functionality.
Use Cases and Applications:
- Industrial Automation: PLCs, control systems, and data loggers requiring reliable non-volatile storage.
- Embedded Systems: Single-board computers, industrial PCs, and legacy embedded controllers.
- Networking Equipment: Routers, firewalls, and network appliances using IDE-based storage.
- Kiosks and POS Terminals: Compact, low-maintenance storage for transaction and operating data.
- Legacy System Support: Ideal for maintaining or upgrading older systems that rely on IDE interfaces.
- Boot Device: Can host operating systems such as DOS, Linux, or embedded Windows variants.
Compatibility:
- Fully compatible with IDE/ATA standards (ATA-5 or earlier).
- Works with standard BIOS and operating systems supporting IDE drives.
- Can be used with IDE-to-SATA adapters for hybrid configurations (with appropriate hardware).
5. Components & Accessories
Included Items:
- 1 × D40128M29R01-40V 40-pin IDE Module (128MB, Vertical Orientation)
Optional Accessories:
- IDE ribbon cable (40-pin, 2.54mm pitch)
- IDE-to-USB or IDE-to-SATA adapter (for testing or integration with modern systems)
- Mounting bracket or retention clip (for securing vertical modules in vibration-prone environments)
Connectors:
- Primary Connector: 40-pin male IDE connector for data and power (pins 20 and 28 typically reserved or keyed).
- Power Supply: Draws +5V directly from the IDE interface (no separate power connector required).
6. Installation & Setup
Requirements:
- Host system with a 40-pin IDE interface (motherboard, embedded controller, or adapter).
- +5V DC power supply via IDE connector.
Mounting Options:
- Vertical Mount: The module plugs directly into the IDE socket in a perpendicular orientation to the motherboard.
- Retention Mechanism: Optional mechanical support may be used to stabilize the module in environments with vibration or movement.
Configuration:
- Master/Slave Selection: Typically configured via jumper pins on the module (if present).
- BIOS Detection: The module is recognized as a standard IDE drive; no special drivers required.
- Formatting: Can be formatted using standard file systems (FAT16, FAT32, or other depending on OS).
- Boot Setup: Set as primary boot device in BIOS if used as system drive.
Installation Steps:
1. Power off the host system.
2. Align the 40-pin connector with the IDE socket on the motherboard.
3. Insert the module vertically, ensuring proper pin alignment.
4. Secure the module if necessary using a bracket or clip.
5. Power on the system and verify detection in BIOS.
6. Partition and format as required.
7. Performance & Capabilities
- Interface Speed: Supports PIO Mode 0–4, Multiword DMA Mode 0–2, and Ultra DMA Mode 0–2 (up to 33MB/s theoretical maximum).
- Sequential Read Speed: Up to 25MB/s (typical)
- Sequential Write Speed: Up to 15MB/s (typical)
- Access Time: <1ms (typical)
- Latency: Negligible compared to mechanical drives due to solid-state architecture.
- Data Transfer Protocol: ATA/ATAPI command set compliant.
- Error Correction: Built-in ECC (Error Correction Code) for data integrity.
- Wear-Leveling: Dynamic and static wear-leveling algorithms extend flash lifespan.
- Bad Block Management: Automatic detection and remapping of defective blocks.
- Power Management: Supports standby and sleep modes to reduce power consumption.
Limitations:
- Limited capacity (128MB) suitable for lightweight operating systems or firmware storage.
- Not intended for high-throughput or large-scale data storage applications.
- Performance dependent on host IDE controller and system configuration.
8. Standards & Compliance
- Interface Standard: ATA/ATAPI-5 (compatible with earlier ATA standards)
- Electrical Compliance: Conforms to IDE 40-pin electrical specifications (5V logic level).
- Environmental Compliance:
- RoHS (Restriction of Hazardous Substances) compliant
- REACH compliant
- Quality Standards: Manufactured under ISO 9001 and ISO 14001 certified processes (typical for industrial-grade flash modules).
- EMC/EMI Compliance: Meets CE and FCC Class B requirements for electromagnetic compatibility.
- Safety Standards: Designed to meet UL and IEC safety guidelines for electronic components.
9. Additional Information
Warranty:
- Standard 2-year limited warranty (may vary by distributor or region).
- Covers defects in materials and workmanship under normal operating conditions.
Support:
- Technical documentation available, including datasheets and integration guides.
- Firmware updates or configuration utilities may be provided by the manufacturer for specific applications.
- Customer support via authorized distributors or manufacturer’s technical service.
Maintenance:
- No moving parts; minimal maintenance required.
- Recommended to operate within specified temperature and voltage ranges for optimal longevity.
- Periodic data backup advised for critical applications.
Lifecycle & Updates:
- Designed for long-term availability to support industrial and embedded product lifecycles.
- Backward-compatible with legacy IDE systems, ensuring continued usability in older platforms.
- May have successor models with higher capacities or enhanced performance under the same PE33-V series.
### Summary
The D40128M29R01-40V 40pin IDE Module 128MB Vertical (PE33-V) is a compact, industrial-grade solid-state storage solution engineered for embedded and legacy systems utilizing the IDE interface. Offering 128MB of NAND flash storage, a vertical form factor, and robust reliability, it serves as a drop-in replacement for traditional IDE hard drives in space-constrained or vibration-prone environments. With low power consumption, fast access times, and compliance with ATA standards, it is ideal for applications such as industrial automation, embedded controllers, and legacy computing systems requiring stable, long-term storage performance.
This module exemplifies the balance between legacy compatibility and modern solid-state reliability, ensuring dependable operation across a wide range of industrial and embedded use cases.
No manuals/catalogs available.
No accessories available.