Ethernet 10/100TX 12*DI dry contact 2*DO 2*counter Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, 2*counter 32bit 0,3..4500Hz isolated, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 12*DI dry contact 2*DO 2*counter Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, 2*counter 32bit 0,3..4500Hz isolated, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 12*DI dry contact 2*DO common source or ground 2*counter Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, 2*counter 32bit 0,3..4500Hz isolated, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 8*DI dry contact and 8*DO Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 8*DI dry contact and 8*DO Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 8*DI and 8*DO Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 8*DI dry or wet contact and 4*DO open collector NPN Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 5*DI and 3*DO Relay Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 7*DI and 3*DO Relay Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

Ethernet 10/100TX 5*DI and 4*DO Relay Modbus module, standard Modbus RTU protocol, protocols Modbus/TCP TCP/IP UDP ICMP ARP, user friendly status LEDs Power and Ethernet link, each DI channel supports up to 1kHz 32bit counter, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: Modbus Digital

- **16 Isolated Digital Output Channels:** Each channel provides open collector output up to **+30V, 100mA** per channel. - **High Isolation Protection:** 3750 Vrms isolation between channels and logic circuitry ensures electrical safety and noise immunity. - **Multi-Protocol Support:** Automatically detects and supports **TRP-ASCII**, **Modbus RTU**, and **Modbus ASCII** protocols. - **Ethernet Connectivity:** Integrated **RJ45 Ethernet interface** with **Auto-MDIX** for automatic crossover detection and correction. - **Web-Based Configuration:** Built-in web server allows configuration and I/O monitoring via browser on PC, tablet, or smartphone. - **Virtual COM Mode:** Enables serial-over-Ethernet communication for legacy applications. - **Pair Mode Functionality:** Can be paired directly with **TRP-C26H** (16-channel digital input module) for remote I/O mirroring without software or drivers. - **Watchdog and Heartbeat Functions:** Hardware watchdog prevents system lock-up; heartbeat packets maintain reliable TCP connections. - **Multiple TCP Connections:** Supports up to **16 simultaneous TCP client connections**. - **Flexible Power Input:** Accepts **DC +10 V to +30 V** via screw terminal or DC jack (5.5 × 2.1 mm). - **LED Indicators:** Power, Link, and 16 channel-specific LEDs for real-time status monitoring. - **Firmware Upgradable:** Supports firmware updates via the Internet. - **Factory Reset Button:** External push button for restoring default configuration. - **Auto-Reconnection:** Automatically reconnects after power or Ethernet failure. - **Compact Industrial Design:** Rugged enclosure suitable for DIN-rail or panel mounting.

Manufacturer: Trycom

Category: Modbus Digital

- **16 optically isolated digital input channels** with individual counters (0–65535). - **Wide input voltage range:** accepts logic signals from ±0 to 30 V DC. - **High isolation protection:** 3750 Vrms optical isolation between channels and logic circuitry. - **Multi-protocol support:** automatically detects and operates with TRP-ASCII, Modbus RTU, or Modbus ASCII. - **Ethernet-based communication:** Modbus TCP/IP interface via RJ45 connector. - **Supports up to 16 simultaneous TCP connections** for multi-host environments. - **Built-in web server:** allows configuration, monitoring, and firmware updates via standard web browsers. - **Virtual-COM mode:** enables legacy serial applications to communicate over Ethernet. - **Pair mode operation:** directly links with TRP-C24H for remote digital I/O mirroring without PC or software. - **Watchdog and voltage monitoring:** ensures stable operation and automatic recovery after power or network failure. - **Heartbeat function:** transmits periodic keep-alive packets every 5 seconds to maintain reliable connections. - **Auto-MDIX Ethernet port:** supports automatic crossover detection for flexible cabling. - **Dual power input options:** screw terminal or DC jack (10–30 V DC). - **DIN-rail and panel mounting support** for industrial installation. - **LED indicators:** Power, Link, and 16 channel status LEDs for real-time diagnostics. - **Factory reset button:** restores default configuration parameters. - **Firmware upgradeable via Internet** for long-term maintainability.

Manufacturer: Trycom

Category: Modbus Digital

- **4 Isolated Digital Inputs and 4 AC Relay Outputs:** Provides four optically isolated digital input channels (±0–30V DC) and four relay outputs rated up to 5A/250V AC. - **Multi-Protocol Support:** Automatically detects and supports **TRP-ASCII**, **Modbus RTU**, and **Modbus ASCII** communication protocols for flexible integration. - **Ethernet Connectivity:** Equipped with an **RJ45 Ethernet interface** supporting **Modbus TCP/IP** and **Virtual-COM** operation modes. - **Pair Mode Operation:** Enables direct remote control between two TRP-C28H modules without PC or software intervention. - **Web-Based Configuration:** Built-in web server allows configuration and monitoring via any web browser on PC, tablet, or smartphone. - **High Isolation and Reliability:** Optical isolation of **3750 Vrms** on digital inputs and **4000V surge strength** on relays ensures robust operation in harsh industrial environments. - **Watchdog and Heartbeat Functions:** Built-in watchdog prevents system hang-ups; heartbeat function maintains reliable TCP communication by sending periodic keep-alive signals. - **Flexible Power Input:** Accepts **DC +10V to +30V** via screw terminal or DC jack (5.5×2.1 mm). - **Auto-MDIX Ethernet Port:** Supports automatic crossover detection and correction for simplified network cabling. - **LED Indicators:** Power, link, and individual I/O channel status LEDs provide clear visual feedback. - **DIN-Rail and Panel Mounting:** Supports both mounting options for versatile installation in control cabinets or panels. - **Firmware Upgradeable:** Firmware can be updated via the Internet or Trycom Device Manager utility.

Manufacturer: Trycom

Category: Modbus Digital

Ethernet 10/100TX 6*DI and 6*Relay Modbus module, standard Modbus RTU protocol, protocols modbus TCP/ TCP/IP UDP / ICMP / ARP, user friendly status LEDs power USB and Ethernet link, DI counter input 32bit 500Hz, Relay (form A) contact rating 0,6A/125VAC 2A/30VDC, each channel supports 500Hz pulse output, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: PoE Modbus Digital

Ethernet 10/100TX 6*DI and 6*Relay Modbus module, standard Modbus RTU protocol, protocols modbus TCP/ TCP/IP UDP / ICMP / ARP, user friendly status LEDs power USB and Ethernet link, DI counter input 32bit 500Hz, Relay (form A) contact rating 5A@250VAC 5A@30VDC, each channel supports 500Hz pulse output, +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: PoE Modbus Digital

Ethernet 10/100TX 6*DI and 6*Relay PoE Modbus module, standard Modbus RTU protocol, protocols modbus TCP/ TCP/IP UDP / ICMP / ARP, user friendly status LEDs power USB and Ethernet link, DI counter input 32bit 500Hz, Relay (form A) contact rating 0,6A/125VAC 2A/30VDC, each channel supports 500Hz pulse output, PoE or +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: PoE Modbus Digital

Ethernet 10/100TX 6*DI and 6*Relay PoE Modbus module, standard Modbus RTU protocol, protocols modbus TCP/ TCP/IP UDP / ICMP / ARP, user friendly status LEDs power USB and Ethernet link, DI counter input 32bit 500Hz, Relay (form A) contact rating 5A@250VAC 5A@30VDC, each channel supports 500Hz pulse output, PoE or +10..30VDC ~2,0W, DIN-Rail or wall mount, dimensions 122*71,6*25mm, InLog

Manufacturer: inLog

Category: PoE Modbus Digital

- **Ethernet-to-Serial Conversion:** Converts standard RS232 serial communication to Ethernet TCP/IP, allowing remote access and control of serial devices. - **Integrated 8-bit TTL I/O:** Provides eight programmable TTL channels configurable as input or output for digital signal control or monitoring. - **Counter Functionality:** TTL inputs can function as counters supporting up to 200 Hz square wave signals. - **Protection Features:** - PTC (auto-resettable fuse) protection on TTL I/O and communication signal pins. - Over-voltage protection up to 60 VDC (max). - Over-current protection up to 50 mA (max). - **Network Flexibility:** Supports 10/100 Mbps Ethernet with auto-detection and IP reassignment capability. - **Software Integration:** Includes Windows and Linux DLL libraries (EMC74xx.dll) for easy integration into custom applications using C/C++, Visual Basic, or other Windows-based environments. - **Virtual COM Port Support:** Allows the Ethernet-connected module to appear as a local COM port to existing software, ensuring compatibility with legacy serial applications. - **DIN Rail Mounting:** Compact industrial design suitable for control cabinets and automation panels. - **High Reliability:** Designed for stable, continuous operation in industrial environments with wide operating temperature and humidity ranges.

Manufacturer: JS Automation

Category: Bridging IO Modules

- **Ethernet to RS422/RS485 Conversion:** Converts traditional serial communication protocols to Ethernet and vice versa, enabling network-based control of serial devices. - **8 TTL Digital I/O Channels:** Configurable as input or output, each channel supports up to 60 VDC over-voltage protection and 50 mA current protection. - **Integrated Counter Function:** Each TTL input can function as a low-frequency counter (up to 200 Hz square wave). - **Electrical Isolation:** Provides isolation between Ethernet, RS485, and TTL interfaces for enhanced noise immunity and system protection. - **Auto-Detect Ethernet Interface:** Supports 10/100 Mbps auto-switching for flexible network integration. - **Software-Selectable Serial Mode:** RS422 or RS485 mode can be configured via software commands. - **PTC Protection:** Auto-resettable fuse protection on TTL I/O and communication signal pins. - **Remote Configuration:** IP address and communication port can be reassigned remotely. - **Virtual COM Port Support:** Allows the module to appear as a standard COM port on Windows systems for legacy software compatibility. - **Compact Industrial Design:** DIN rail mountable, rugged enclosure suitable for industrial environments. - **Comprehensive Software Library:** Includes DLL-based API for Windows (EMC74xx.dll) supporting C/C++, Visual Basic, and Borland environments.

Manufacturer: JS Automation

Category: Bridging IO Modules

- **Dual Ethernet Ports:** Two 10/100 Mbps auto‑switching RJ45 interfaces for flexible network topology (daisy‑chain or redundant connection). - **RS232 Serial Interface:** Full‑featured RS232 port supporting baud rates from 1200 to 921.6 kbps. - **8 Configurable Digital I/O Channels:** Each bit can be independently configured as input or output; supports TTL logic levels. - **Over‑Voltage and Over‑Current Protection:** Digital inputs protected up to 60 V DC; outputs rated up to 45 V DC, 500 mA peak. - **Software Counter Function:** Inputs can serve as low‑frequency counters up to 200 Hz. - **Standalone Operation Mode:** Built‑in sequence control allows autonomous operation without Ethernet connection. - **Wide Power Supply Range:** Operates from 12 V DC to 24 V DC. - **High Reliability:** Industrial‑grade design with metal enclosure and DIN‑rail mounting. - **Flexible Configuration:** IP reassignment, software key protection, and remote firmware management. - **Cross‑Platform Software Support:** Windows and Linux DLL libraries for integration with C/C++, Visual Basic, and other environments. - **Virtual COM Port Functionality:** Emulates a standard COM port over Ethernet for legacy software compatibility. - **Compact Form Factor:** 107.6 × 135.8 × 34 mm metal housing. - **Operating Temperature Range:** 0 °C to +70 °C; storage −20 °C to +80 °C.

Manufacturer: JS Automation

Category: Bridging IO Modules

- **Dual Ethernet Ports:** Two 10/100 Mbps auto‑negotiating RJ‑45 interfaces for flexible network topology (daisy‑chain or redundant connection). - **Isolated RS‑422/485 Interface:** Magnetic coupling isolation ensures reliable communication and protection against ground loops. - **Configurable Digital I/O:** Eight TTL‑level I/O lines (IO_0–IO_7), each independently configurable as input or output. - **High Drive Capability:** Digital outputs support up to 500 mA peak current at 45 V DC maximum. - **Counter Functionality:** Each input can function as a low‑frequency counter (≤ 200 Hz). - **Wide Baud Rate Range:** 1200 bps to 921,600 bps, supporting 5–8 data bits, 1–1.5 stop bits, and parity options (None, Even, Odd). - **Software‑Selectable Serial Mode:** RS‑422 or RS‑485 operation selectable via software command. - **Over‑Voltage and Over‑Current Protection:** Inputs protected up to 60 V DC and 50 mA. - **Flexible Power Supply:** Operates from 12 V DC to 24 V DC. - **Compact Metal Enclosure:** Industrial‑grade metal housing with DIN‑rail mounting capability. - **Standalone Logic Control:** Built‑in standalone mode allows autonomous I/O control based on pre‑programmed logic sequences. - **Virtual COM Port Support:** Emulates a standard COM port over Ethernet for legacy software compatibility. - **Software Security Key:** Password‑protected configuration and control to prevent unauthorized access. - **Firmware and API Support:** Comprehensive DLL library (EMC84xx.dll) for Windows 2000 and later, supporting C/C++, Visual Basic, and Borland environments. - **Auto IP and Port Configuration:** IP reassignment and socket port modification supported via software commands. - **Diagnostics and Status LEDs:** System activity and communication indicators for quick status verification.

Manufacturer: JS Automation

Category: Bridging IO Modules

**General Capabilities** - Ethernet‑based remote analog I/O control module with web‑based configuration. - Supports both unipolar and bipolar analog input ranges. - Available in multiple variants for different resolution and input configurations: - **EMA‑8308:** 24‑bit unipolar, 8 differential / 16 single‑ended inputs, 2×12‑bit outputs. - **EMA‑8308A:** 24‑bit unipolar, 8 differential / 16 single‑ended inputs, 2×16‑bit outputs. - **EMA‑8308D:** 24‑bit bipolar, 8 differential inputs, 2×12‑bit outputs. - **EMA‑8308DA:** 24‑bit bipolar, 8 differential inputs, 2×16‑bit outputs. **Analog Input Section** - 24‑bit resolution with selectable input ranges: - Unipolar: 0–5 V, 0–10 V, 0–20 mA, 4–20 mA. - Bipolar: ±5 V, ±10 V, 0–20 mA, 4–20 mA. - Programmable single‑ended or differential input configuration. - High common‑mode voltage tolerance up to 10 V (for EMA‑8308D/DA). - Over‑voltage protection up to 20 V DC. - Input filter bandwidths: 7.03 kHz, 3.52 kHz, 1.76 kHz, 879 Hz. - Sampling rate: 10 samples/s. - Offset error: 2.5 µV typical, 5 µV max; drift 20 nV/°C. - Common‑mode rejection ratio (CMRR): 120 dB. **Analog Output Section** - Two analog output channels. - Output range: ±10 V DC. - Resolution: 12‑bit (EMA‑8308/D) or 16‑bit (EMA‑8308A/DA). - Overload protection: 50 mA (peak). - Over‑voltage protection: 20 V DC max. **Ethernet Section** - Dual 10/100 Mbps auto‑negotiating Ethernet ports (RJ‑45). - Direct web‑page control and configuration. - IP reassignment and software‑based configuration. - Software key and password protection for security. - Supports UDP communication protocol for remote I/O control. **Mechanical and Electrical** - Compact metal housing for industrial durability. - DIN‑rail mountable. - Power supply: 12–24 V DC input. - Operating temperature: 0 – 70 °C; storage: −20 – 80 °C. - Humidity: 5 – 95 % RH (non‑condensing).

Manufacturer: JS Automation

Category: Analog Modules

**General Highlights** - Ethernet‑based remote analog I/O control module with web interface - Dual 10/100 Mbps auto‑detecting LAN ports for flexible network integration - High‑resolution 24‑bit analog input and 16‑bit analog output - Supports both unipolar and bipolar input ranges - Differential or single‑ended input configuration (software selectable) - Over‑voltage and overload protection on all analog channels - Compact metal enclosure suitable for DIN‑rail mounting - Compatible with Windows and Linux via provided DLL libraries - Remote addressable and configurable through IP and port settings - Software security key and password protection for configuration access **Analog Input Section** - 24‑bit resolution with selectable input ranges - Configurable as 16 single‑ended or 8 differential channels - Sampling rate: 10 samples/s per channel - Input ranges: 0–5 V, 0–10 V, 0–20 mA, 4–20 mA - High common‑mode voltage tolerance up to 10 V - Input filter bandwidths: 7.03 kHz, 3.52 kHz, 1.76 kHz, 879 Hz - Over‑voltage protection up to 20 V DC **Analog Output Section** - Two 16‑bit D/A output channels - Output range: ±10 V DC - Overload protection: 50 mA (peak) - Over‑voltage protection: 20 V DC (max) **Ethernet Section** - Two RJ‑45 ports (10/100 M auto‑switching) - Web‑based configuration and control interface - IP reassignment and port configuration via software - Supports UDP communication protocol - Default IP: 192.168.0.100 Default Port: 6936

Manufacturer: JS Automation

Category: Analog Modules

**Analog Input Section** - 8 differential analog input channels (bi‑polar configuration). - 24‑bit resolution with high accuracy and low noise. - Input ranges: ±5 V, ±10 V, 0–20 mA, 4–20 mA. - Common‑mode voltage tolerance up to 10 V. - Over‑voltage protection up to 20 V DC (max). - Input filter options: 7.03 kHz, 3.52 kHz, 1.76 kHz, 879 Hz. - Sampling rate: 10 samples per second. - Typical offset error: 2.5 µV; maximum 5 µV. - Offset drift: 20 nV/°C. - Common‑mode rejection ratio (CMRR): 120 dB. **Analog Output Section** - 2 analog output channels. - 12‑bit resolution (EMA‑8308D variant). - Output range: −10 V to +10 V DC. - Overload protection: 50 mA (peak). - Short‑circuit and over‑voltage protection up to 20 V DC. **Ethernet Communication** - Dual 10/100 Mbps auto‑switching Ethernet ports (2 × RJ‑45). - Web‑based configuration and control interface. - IP address reassignment and software key protection. - Supports UDP communication protocol for remote I/O control. - Default IP: 192.168.0.100; default port: 6936. **General Features** - Compact, rugged metal housing for industrial use. - DIN‑rail mountable design. - Power supply: 12–24 V DC input. - Operating temperature: 0 °C to +70 °C. - Storage temperature: −20 °C to +80 °C. - Humidity: 5–95 % RH (non‑condensing). - Dimensions: 107.6 (D) × 135.8 (W) × 34 (H) mm (4.3 × 5.4 × 1.4 in).

Manufacturer: JS Automation

Category: Analog Modules

**Analog Input Section** - 8 differential analog input channels (bi‑polar configuration) - 24‑bit resolution for high‑accuracy signal acquisition - Input ranges: ±5 V, ±10 V, 0–20 mA, 4–20 mA - Sampling rate: 10 samples per second - Common‑mode voltage tolerance up to 10 V - Over‑voltage protection up to 20 V DC (max) - Programmable input filters (7.03 kHz, 3.52 kHz, 1.76 kHz, 879 Hz) - Offset error: 2.5 µV (typical), 5 µV (max) - Offset drift: 20 nV/°C - Common‑mode rejection ratio (CMRR): 120 dB **Analog Output Section** - 2 analog output channels - 16‑bit resolution (high‑precision D/A conversion) - Output range: −10 V DC to +10 V DC - Overload protection: 50 mA (peak) - Short‑circuit and over‑voltage protection (up to 20 V DC) **Ethernet Communication** - Dual 10/100 Mbps auto‑switching Ethernet ports (2 × RJ‑45) - Web‑based configuration and control interface - IP address reassignment and software‑based configuration - Supports UDP protocol for remote I/O communication - Software key and password protection for security - Compatible with Windows and Linux environments via DLL libraries **General Features** - Compact DIN‑rail mountable metal enclosure - Power supply: 12–24 V DC input - Operating temperature: 0 °C to +70 °C - Storage temperature: −20 °C to +80 °C - Humidity: 5–95 % RH (non‑condensing) - High reliability and remote addressability - Factory default IP: 192.168.0.100, port 6936

Manufacturer: JS Automation

Category: Analog Modules