cPS-150R
LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Dual Redundant Power Support:
Accommodates two 3U CompactPCI 31‑pin redundant power supply units for high‑availability operation.
- PICMG 2.11 Compliance:
Fully compliant with the 31‑pin CompactPCI power interface standard, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS‑150R.
- Redundant Power Architecture:
Enables hot‑swappable redundant PSU configuration, allowing continuous system operation during power module replacement or failure.
- Multiple Power Output Interfaces:
Equipped with two ATX‑style DC output connectors for flexible power distribution to system backplanes or peripheral modules.
- External AC Input Terminals:
Provides screw‑type terminals for secure connection of external AC power sources.
- Compact 3U Form Factor:
Designed for integration into 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm).
- High Reliability and Industrial Design:
Built with industrial‑grade PCB materials and connectors for long‑term durability in harsh environments.
- Ease of Integration:
Compatible with ADLINK’s cPCIS‑1000 and cPCIS‑2000 chassis and sub‑systems, simplifying system assembly and maintenance.
Accommodates two 3U CompactPCI 31‑pin redundant power supply units for high‑availability operation.
- PICMG 2.11 Compliance:
Fully compliant with the 31‑pin CompactPCI power interface standard, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS‑150R.
- Redundant Power Architecture:
Enables hot‑swappable redundant PSU configuration, allowing continuous system operation during power module replacement or failure.
- Multiple Power Output Interfaces:
Equipped with two ATX‑style DC output connectors for flexible power distribution to system backplanes or peripheral modules.
- External AC Input Terminals:
Provides screw‑type terminals for secure connection of external AC power sources.
- Compact 3U Form Factor:
Designed for integration into 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm).
- High Reliability and Industrial Design:
Built with industrial‑grade PCB materials and connectors for long‑term durability in harsh environments.
- Ease of Integration:
Compatible with ADLINK’s cPCIS‑1000 and cPCIS‑2000 chassis and sub‑systems, simplifying system assembly and maintenance.
Comprehensive Product Summary: ADLINK cBP‑3052E Power Backplane
### 1. Product Overview
Product Name: Power Backplane cPCI 3U Dual 31‑pin
Model Number: cBP‑3052E
Series: cBP‑3050 Series (CompactPCI 3U Power Backplanes)
Article Number: cBP‑3052E
Manufacturer: ADLINK Technology Inc.
Trademark: NuIPC® (registered trademark of ADLINK Technology Inc.)
Product Category: CompactPCI 3U Power Distribution Backplane
Associated Systems: cPCIS‑1000 / cPCIS‑2000 Series CompactPCI Sub‑systems
The ADLINK cBP‑3052E is a 3U CompactPCI power backplane designed to support dual redundant 31‑pin power supply units (PSUs) compliant with the PICMG 2.11 CompactPCI Power Interface Specification. It provides a robust, redundant power distribution interface for industrial and embedded computing platforms, ensuring high availability and fault tolerance in mission‑critical CompactPCI systems.
### 2. Key Features
- Dual Redundant Power Support:
Accommodates two 3U CompactPCI 31‑pin redundant power supply units for high‑availability operation.
- PICMG 2.11 Compliance:
Fully compliant with the 31‑pin CompactPCI power interface standard, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS‑150R.
- Redundant Power Architecture:
Enables hot‑swappable redundant PSU configuration, allowing continuous system operation during power module replacement or failure.
- Multiple Power Output Interfaces:
Equipped with two ATX‑style DC output connectors for flexible power distribution to system backplanes or peripheral modules.
- External AC Input Terminals:
Provides screw‑type terminals for secure connection of external AC power sources.
- Compact 3U Form Factor:
Designed for integration into 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm).
- High Reliability and Industrial Design:
Built with industrial‑grade PCB materials and connectors for long‑term durability in harsh environments.
- Ease of Integration:
Compatible with ADLINK’s cPCIS‑1000 and cPCIS‑2000 chassis and sub‑systems, simplifying system assembly and maintenance.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Form Factor | 3U CompactPCI |
| Compliance | PICMG 2.11 (31‑pin CompactPCI Power Interface) |
| Supported PSUs | Two 3U redundant 31‑pin CompactPCI power supply units |
| Power Output Connectors | Two ATX‑like 20‑pin DC output connectors |
| AC Input Interface | Screw terminal block for external AC input |
| Dimensions (W × H × T) | 133.35 mm × 81.0 mm × 3.2 mm |
| Slot Width | 4‑slot (approx. 81 mm) |
| PCB Thickness | 3.2 mm |
| Material | Multi‑layer FR‑4 PCB, industrial‑grade copper traces |
| Mounting Orientation | Horizontal installation within 3U CompactPCI chassis |
| Operating Temperature | 0 °C – 70 °C (system dependent) |
| Storage Temperature | −40 °C – +85 °C (system dependent) |
| Relative Humidity | < 95 % @ 40 °C, non‑condensing |
| Weight | Approx. 0.3 kg (board only) |
### 4. Functionality
The cBP‑3052E serves as a redundant power distribution backplane for CompactPCI systems. It connects two hot‑swappable 31‑pin power supply modules (such as ADLINK cPS‑150R) to the system’s DC power rails and provides dual ATX‑style outputs for downstream backplanes or peripheral devices.
Operational Concept:
- Two PSUs are inserted into the 31‑pin sockets (J1 and J2).
- The backplane automatically balances load sharing and provides redundancy.
- If one PSU fails, the other continues to supply uninterrupted power.
- AC input is fed through screw terminals (CN5).
- DC outputs are distributed via two ATX‑like connectors (CN1 and CN2).
- Optional sense and control signals (INH#, FAL#, DEG#) enable system‑level power management and monitoring.
Typical Use Cases:
- Industrial automation controllers
- Telecommunications CompactPCI platforms
- Embedded computing systems requiring high uptime
- Redundant power configurations in 3U CompactPCI chassis
Compatibility:
- Fully compatible with ADLINK cPS‑150R 31‑pin redundant PSU
- Integrates with cPCIS‑2000 and cPCIS‑1000 series chassis
- Supports standard ATX power distribution to CompactPCI backplanes such as cBP‑3100, cBP‑3200, and cBP‑3400 series
### 5. Components & Accessories
Included Components:
- cBP‑3052E backplane PCB assembly
- Dual 31‑pin PSU sockets (J1, J2)
- Two ATX‑style 20‑pin DC output connectors (CN1, CN2)
- Screw terminal block for AC input (CN5)
- Screw terminal block for GND (CN7)
- Screw terminal block for +5 V output (CN13)
- Screw terminal block for +12 V output (CN15)
Optional / Related Accessories:
- Power Supply Units:
- cPS‑150R (175 W, 31‑pin redundant PSU)
- cPS‑175/AC, cPS‑175/48, cPS‑175/24 (47‑pin PSU variants)
- Chassis Integration:
- cPCIS‑2000A/B (3U CompactPCI chassis with fans)
- cPCIS‑1000 (3U CompactPCI card cage)
- Power Supply Frame:
- cPCI‑PSF (PS2‑size PSU frame)
- Drive Bay Frame:
- cPCI‑DBF (3U drive bay frame for HDD/FDD/CD‑ROM)
### 6. Installation & Setup
Installation Requirements:
- 3U CompactPCI chassis with appropriate PSU bays
- Compatible 31‑pin redundant power supplies (e.g., cPS‑150R)
- Proper AC input wiring to CN5 screw terminals
- Secure mechanical mounting using standard card guides
Mounting Options:
- Horizontal installation within 3U rackmount chassis
- Fixed via standard CompactPCI card guides and screws
Configuration Steps:
1. Mount the cBP‑3052E into the designated power bay of the chassis.
2. Connect AC mains to CN5 screw terminals (Line, Neutral, Ground).
3. Insert two 31‑pin PSUs into J1 and J2 connectors.
4. Connect ATX‑style DC outputs (CN1, CN2) to system backplane or load.
5. Verify correct polarity and secure all connections.
6. Power on the system and confirm redundant PSU operation.
Safety Notes:
- Ensure PSUs are compliant with PICMG 2.11 31‑pin standard.
- Do not insert or remove PSUs under load unless hot‑swap is supported.
- Verify grounding and AC wiring before energizing the system.
### 7. Performance & Capabilities
Electrical Performance:
- Supports full 175 W per PSU (when used with cPS‑150R)
- Redundant operation ensures uninterrupted power delivery
- Load sharing between PSUs within ±10 % tolerance
- Supports +3.3 V, +5 V, +12 V, and −12 V DC outputs
- Integrated sense lines for voltage compensation (+5 V Sense, +5 V Sense+)
Efficiency & Reliability:
- Dependent on PSU efficiency (typically 73 %)
- Designed for continuous 24/7 operation in industrial environments
- Supports hot‑swappable PSU replacement without system downtime
Limitations:
- Only compatible with 31‑pin CompactPCI PSUs (not 47‑pin types)
- Limited to 3U chassis configurations
- Requires external AC input wiring (no integrated power cord)
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (31‑pin)
- PICMG 2.0 R2.1: CompactPCI System Architecture (for system integration)
- ATX Power Connector Standard: 20‑pin DC output interface
Electrical Safety & EMC (via PSU compliance):
- UL 1950, CSA C22.2 No. 950, EN 60950 (Safety)
- EN 55022 Class A (EMI)
- EN 50082‑2, EN 61000‑4‑2/3/4/6/8 (EMS Immunity)
- CE Marking (when used with certified PSU modules)
Environmental Compliance:
- Designed for industrial temperature range (0 °C – 70 °C)
- RoHS compliance (for later revisions)
### 9. Additional Information
Warranty:
ADLINK provides a one‑year limited warranty from the confirmed date of purchase. The warranty covers defects in materials and workmanship under normal use. It excludes damage due to misuse, unauthorized repair, or operation beyond specified limits.
Support & Service:
Customer satisfaction is a priority for ADLINK Technology Inc. Technical support and service are available through the following channels:
- Website: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Product Support: nuipc@adlink.com.tw
- Technical Support: nudaq@adlink.com.tw
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
Maintenance:
- Periodically inspect connectors for dust or oxidation.
- Ensure AC terminals are securely fastened.
- Replace PSUs only with ADLINK‑approved 31‑pin modules.
- Maintain adequate airflow within the chassis for cooling.
Firmware / Hardware Updates:
The cBP‑3052E is a passive backplane and does not require firmware updates. Hardware revisions may be released to improve reliability or compatibility; refer to ADLINK documentation for revision history.
Service Procedure:
For warranty service, return the product postage‑paid with proof of purchase. ADLINK will repair or replace defective units at its discretion. Out‑of‑warranty repairs are available for a service fee.
### Summary
The ADLINK cBP‑3052E Power Backplane is a robust, industrial‑grade 3U CompactPCI component engineered for redundant power distribution in mission‑critical systems. By supporting dual 31‑pin hot‑swappable PSUs, it ensures continuous operation and simplifies maintenance in high‑availability environments. Its compliance with PICMG 2.11 and ATX power standards guarantees interoperability with a wide range of CompactPCI chassis and power modules. Compact dimensions, redundant architecture, and industrial reliability make the cBP‑3052E an essential component for system integrators building fault‑tolerant CompactPCI platforms.
### 1. Product Overview
Product Name: Power Backplane cPCI 3U Dual 31‑pin
Model Number: cBP‑3052E
Series: cBP‑3050 Series (CompactPCI 3U Power Backplanes)
Article Number: cBP‑3052E
Manufacturer: ADLINK Technology Inc.
Trademark: NuIPC® (registered trademark of ADLINK Technology Inc.)
Product Category: CompactPCI 3U Power Distribution Backplane
Associated Systems: cPCIS‑1000 / cPCIS‑2000 Series CompactPCI Sub‑systems
The ADLINK cBP‑3052E is a 3U CompactPCI power backplane designed to support dual redundant 31‑pin power supply units (PSUs) compliant with the PICMG 2.11 CompactPCI Power Interface Specification. It provides a robust, redundant power distribution interface for industrial and embedded computing platforms, ensuring high availability and fault tolerance in mission‑critical CompactPCI systems.
### 2. Key Features
- Dual Redundant Power Support:
Accommodates two 3U CompactPCI 31‑pin redundant power supply units for high‑availability operation.
- PICMG 2.11 Compliance:
Fully compliant with the 31‑pin CompactPCI power interface standard, ensuring interoperability with standard CompactPCI power modules such as ADLINK’s cPS‑150R.
- Redundant Power Architecture:
Enables hot‑swappable redundant PSU configuration, allowing continuous system operation during power module replacement or failure.
- Multiple Power Output Interfaces:
Equipped with two ATX‑style DC output connectors for flexible power distribution to system backplanes or peripheral modules.
- External AC Input Terminals:
Provides screw‑type terminals for secure connection of external AC power sources.
- Compact 3U Form Factor:
Designed for integration into 3U CompactPCI chassis, occupying a 4‑slot width (approximately 81 mm).
- High Reliability and Industrial Design:
Built with industrial‑grade PCB materials and connectors for long‑term durability in harsh environments.
- Ease of Integration:
Compatible with ADLINK’s cPCIS‑1000 and cPCIS‑2000 chassis and sub‑systems, simplifying system assembly and maintenance.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Form Factor | 3U CompactPCI |
| Compliance | PICMG 2.11 (31‑pin CompactPCI Power Interface) |
| Supported PSUs | Two 3U redundant 31‑pin CompactPCI power supply units |
| Power Output Connectors | Two ATX‑like 20‑pin DC output connectors |
| AC Input Interface | Screw terminal block for external AC input |
| Dimensions (W × H × T) | 133.35 mm × 81.0 mm × 3.2 mm |
| Slot Width | 4‑slot (approx. 81 mm) |
| PCB Thickness | 3.2 mm |
| Material | Multi‑layer FR‑4 PCB, industrial‑grade copper traces |
| Mounting Orientation | Horizontal installation within 3U CompactPCI chassis |
| Operating Temperature | 0 °C – 70 °C (system dependent) |
| Storage Temperature | −40 °C – +85 °C (system dependent) |
| Relative Humidity | < 95 % @ 40 °C, non‑condensing |
| Weight | Approx. 0.3 kg (board only) |
### 4. Functionality
The cBP‑3052E serves as a redundant power distribution backplane for CompactPCI systems. It connects two hot‑swappable 31‑pin power supply modules (such as ADLINK cPS‑150R) to the system’s DC power rails and provides dual ATX‑style outputs for downstream backplanes or peripheral devices.
Operational Concept:
- Two PSUs are inserted into the 31‑pin sockets (J1 and J2).
- The backplane automatically balances load sharing and provides redundancy.
- If one PSU fails, the other continues to supply uninterrupted power.
- AC input is fed through screw terminals (CN5).
- DC outputs are distributed via two ATX‑like connectors (CN1 and CN2).
- Optional sense and control signals (INH#, FAL#, DEG#) enable system‑level power management and monitoring.
Typical Use Cases:
- Industrial automation controllers
- Telecommunications CompactPCI platforms
- Embedded computing systems requiring high uptime
- Redundant power configurations in 3U CompactPCI chassis
Compatibility:
- Fully compatible with ADLINK cPS‑150R 31‑pin redundant PSU
- Integrates with cPCIS‑2000 and cPCIS‑1000 series chassis
- Supports standard ATX power distribution to CompactPCI backplanes such as cBP‑3100, cBP‑3200, and cBP‑3400 series
### 5. Components & Accessories
Included Components:
- cBP‑3052E backplane PCB assembly
- Dual 31‑pin PSU sockets (J1, J2)
- Two ATX‑style 20‑pin DC output connectors (CN1, CN2)
- Screw terminal block for AC input (CN5)
- Screw terminal block for GND (CN7)
- Screw terminal block for +5 V output (CN13)
- Screw terminal block for +12 V output (CN15)
Optional / Related Accessories:
- Power Supply Units:
- cPS‑150R (175 W, 31‑pin redundant PSU)
- cPS‑175/AC, cPS‑175/48, cPS‑175/24 (47‑pin PSU variants)
- Chassis Integration:
- cPCIS‑2000A/B (3U CompactPCI chassis with fans)
- cPCIS‑1000 (3U CompactPCI card cage)
- Power Supply Frame:
- cPCI‑PSF (PS2‑size PSU frame)
- Drive Bay Frame:
- cPCI‑DBF (3U drive bay frame for HDD/FDD/CD‑ROM)
### 6. Installation & Setup
Installation Requirements:
- 3U CompactPCI chassis with appropriate PSU bays
- Compatible 31‑pin redundant power supplies (e.g., cPS‑150R)
- Proper AC input wiring to CN5 screw terminals
- Secure mechanical mounting using standard card guides
Mounting Options:
- Horizontal installation within 3U rackmount chassis
- Fixed via standard CompactPCI card guides and screws
Configuration Steps:
1. Mount the cBP‑3052E into the designated power bay of the chassis.
2. Connect AC mains to CN5 screw terminals (Line, Neutral, Ground).
3. Insert two 31‑pin PSUs into J1 and J2 connectors.
4. Connect ATX‑style DC outputs (CN1, CN2) to system backplane or load.
5. Verify correct polarity and secure all connections.
6. Power on the system and confirm redundant PSU operation.
Safety Notes:
- Ensure PSUs are compliant with PICMG 2.11 31‑pin standard.
- Do not insert or remove PSUs under load unless hot‑swap is supported.
- Verify grounding and AC wiring before energizing the system.
### 7. Performance & Capabilities
Electrical Performance:
- Supports full 175 W per PSU (when used with cPS‑150R)
- Redundant operation ensures uninterrupted power delivery
- Load sharing between PSUs within ±10 % tolerance
- Supports +3.3 V, +5 V, +12 V, and −12 V DC outputs
- Integrated sense lines for voltage compensation (+5 V Sense, +5 V Sense+)
Efficiency & Reliability:
- Dependent on PSU efficiency (typically 73 %)
- Designed for continuous 24/7 operation in industrial environments
- Supports hot‑swappable PSU replacement without system downtime
Limitations:
- Only compatible with 31‑pin CompactPCI PSUs (not 47‑pin types)
- Limited to 3U chassis configurations
- Requires external AC input wiring (no integrated power cord)
### 8. Standards & Compliance
Industry Standards:
- PICMG 2.11: CompactPCI Power Interface Specification (31‑pin)
- PICMG 2.0 R2.1: CompactPCI System Architecture (for system integration)
- ATX Power Connector Standard: 20‑pin DC output interface
Electrical Safety & EMC (via PSU compliance):
- UL 1950, CSA C22.2 No. 950, EN 60950 (Safety)
- EN 55022 Class A (EMI)
- EN 50082‑2, EN 61000‑4‑2/3/4/6/8 (EMS Immunity)
- CE Marking (when used with certified PSU modules)
Environmental Compliance:
- Designed for industrial temperature range (0 °C – 70 °C)
- RoHS compliance (for later revisions)
### 9. Additional Information
Warranty:
ADLINK provides a one‑year limited warranty from the confirmed date of purchase. The warranty covers defects in materials and workmanship under normal use. It excludes damage due to misuse, unauthorized repair, or operation beyond specified limits.
Support & Service:
Customer satisfaction is a priority for ADLINK Technology Inc. Technical support and service are available through the following channels:
- Website: [www.adlinktech.com](http://www.adlinktech.com)
- Email Contacts:
- General Service: service@adlink.com.tw
- NuIPC Product Support: nuipc@adlink.com.tw
- Technical Support: nudaq@adlink.com.tw
- Telephone: +886‑2‑8226‑5877
- Fax: +886‑2‑8226‑5717
- Address: 9F, No. 166, Jian Yi Road, Chungho City, Taipei 235, Taiwan, R.O.C.
Maintenance:
- Periodically inspect connectors for dust or oxidation.
- Ensure AC terminals are securely fastened.
- Replace PSUs only with ADLINK‑approved 31‑pin modules.
- Maintain adequate airflow within the chassis for cooling.
Firmware / Hardware Updates:
The cBP‑3052E is a passive backplane and does not require firmware updates. Hardware revisions may be released to improve reliability or compatibility; refer to ADLINK documentation for revision history.
Service Procedure:
For warranty service, return the product postage‑paid with proof of purchase. ADLINK will repair or replace defective units at its discretion. Out‑of‑warranty repairs are available for a service fee.
### Summary
The ADLINK cBP‑3052E Power Backplane is a robust, industrial‑grade 3U CompactPCI component engineered for redundant power distribution in mission‑critical systems. By supporting dual 31‑pin hot‑swappable PSUs, it ensures continuous operation and simplifies maintenance in high‑availability environments. Its compliance with PICMG 2.11 and ATX power standards guarantees interoperability with a wide range of CompactPCI chassis and power modules. Compact dimensions, redundant architecture, and industrial reliability make the cBP‑3052E an essential component for system integrators building fault‑tolerant CompactPCI platforms.
- cPS-150R - cPCI power supply DIN41612, 85..265ACV
