LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Dual RS‑422/RS‑485 Ports: Two independent asynchronous serial ports supporting either RS‑422 full‑duplex or RS‑485 half/full‑duplex communication.
- High‑Speed Data Transfer: Supports baud rates from 50 bps up to 921.6 Kbps per port.
- 16550‑Compatible UART: Each port uses a 16C550C UART with 32‑byte transmit/receive FIFO buffers and hardware flow control to prevent data loss at high speeds.
- Automatic Data Direction Control (ADDC): Built‑in hardware intelligence for RS‑485 half‑duplex operation eliminates the need for software‑based RTS control.
- Surge and Isolation Protection:
- Optical isolation up to 2 kV DC between board and field devices.
- Surge protection up to 25 kV ESD and 2 kV EFT on all signal lines.
- Termination Resistors On‑Board: 120 Ω termination resistors are jumper‑selectable for impedance matching in RS‑422/485 networks.
- Plug‑and‑Play PCI Interface: Fully compliant with PCI 2.1 specification; IRQ and I/O addresses are automatically assigned by the PCI BIOS—no DIP switches or jumpers required.
- Compact Half‑Size Board: 120 mm × 80 mm form factor suitable for standard PCI slots.
- Multi‑Board Support: Up to four CP‑132 Series boards can be installed in a single system.
- Comprehensive Software Support: Drivers for Windows NT, Windows 95/98, and DOS; includes Moxa’s `PComm` and `API‑232` programming libraries and utilities.
- Industrial‑Grade Reliability: Designed for harsh environments such as factory automation and process control systems.
- High‑Speed Data Transfer: Supports baud rates from 50 bps up to 921.6 Kbps per port.
- 16550‑Compatible UART: Each port uses a 16C550C UART with 32‑byte transmit/receive FIFO buffers and hardware flow control to prevent data loss at high speeds.
- Automatic Data Direction Control (ADDC): Built‑in hardware intelligence for RS‑485 half‑duplex operation eliminates the need for software‑based RTS control.
- Surge and Isolation Protection:
- Optical isolation up to 2 kV DC between board and field devices.
- Surge protection up to 25 kV ESD and 2 kV EFT on all signal lines.
- Termination Resistors On‑Board: 120 Ω termination resistors are jumper‑selectable for impedance matching in RS‑422/485 networks.
- Plug‑and‑Play PCI Interface: Fully compliant with PCI 2.1 specification; IRQ and I/O addresses are automatically assigned by the PCI BIOS—no DIP switches or jumpers required.
- Compact Half‑Size Board: 120 mm × 80 mm form factor suitable for standard PCI slots.
- Multi‑Board Support: Up to four CP‑132 Series boards can be installed in a single system.
- Comprehensive Software Support: Drivers for Windows NT, Windows 95/98, and DOS; includes Moxa’s `PComm` and `API‑232` programming libraries and utilities.
- Industrial‑Grade Reliability: Designed for harsh environments such as factory automation and process control systems.
Comprehensive Product Summary – Moxa Industio CP‑132IS
### 1. Product Overview
Product Name: Industio CP‑132IS
Model: CP‑132IS
Series: Industio CP‑132 Series
Article Number: CP‑132IS
Manufacturer: Moxa Technologies Co., Ltd.
Manufacturer Contact:
Tel: +886‑2‑8665‑6373 Fax: +886‑2‑8665‑6372
Website: [www.moxa.com](https://www.moxa.com) Email: support@moxa.com.tw
The Moxa Industio CP‑132IS is a two‑port industrial serial communication board designed for the PCI bus. It provides robust RS‑422/RS‑485 connectivity with integrated surge and optical isolation protection. As part of Moxa’s Industio CP‑132 Series, the CP‑132IS is engineered for industrial automation, data acquisition, and remote device control applications that require reliable, high‑speed, and noise‑immune serial communication.
### 2. Key Features
- Dual RS‑422/RS‑485 Ports: Two independent asynchronous serial ports supporting either RS‑422 full‑duplex or RS‑485 half/full‑duplex communication.
- High‑Speed Data Transfer: Supports baud rates from 50 bps up to 921.6 Kbps per port.
- 16550‑Compatible UART: Each port uses a 16C550C UART with 32‑byte transmit/receive FIFO buffers and hardware flow control to prevent data loss at high speeds.
- Automatic Data Direction Control (ADDC): Built‑in hardware intelligence for RS‑485 half‑duplex operation eliminates the need for software‑based RTS control.
- Surge and Isolation Protection:
- Optical isolation up to 2 kV DC between board and field devices.
- Surge protection up to 25 kV ESD and 2 kV EFT on all signal lines.
- Termination Resistors On‑Board: 120 Ω termination resistors are jumper‑selectable for impedance matching in RS‑422/485 networks.
- Plug‑and‑Play PCI Interface: Fully compliant with PCI 2.1 specification; IRQ and I/O addresses are automatically assigned by the PCI BIOS—no DIP switches or jumpers required.
- Compact Half‑Size Board: 120 mm × 80 mm form factor suitable for standard PCI slots.
- Multi‑Board Support: Up to four CP‑132 Series boards can be installed in a single system.
- Comprehensive Software Support: Drivers for Windows NT, Windows 95/98, and DOS; includes Moxa’s `PComm` and `API‑232` programming libraries and utilities.
- Industrial‑Grade Reliability: Designed for harsh environments such as factory automation and process control systems.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Bus Interface | 32‑bit PCI, compliant with PCI 2.1 |
| Number of Ports | 2 independent RS‑422/RS‑485 ports |
| Maximum Boards per System | 4 |
| Communication Controller | 16C550C UART or compatible |
| Baud Rate Range | 50 bps – 921.6 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity Options | None, Even, Odd, Space, Mark |
| Signal Lines (RS‑422) | TxD±, RxD±, RTS±, CTS±, GND |
| Signal Lines (RS‑485) | Data±, GND |
| Connectors | 2 × DB9 male |
| Optical Isolation | 2 kV DC (CP‑132I, CP‑132IS) |
| Surge Protection | ESD 25 kV max, EFT 2 kV max (CP‑132S, CP‑132IS) |
| Termination Resistor | 120 Ω jumper‑selectable |
| Power Requirements | +5 V DC, 710 mA max (CP‑132IS) |
| Operating Temperature | 0 °C – 55 °C |
| Dimensions | 120 mm × 80 mm |
| Weight | Approx. 100 g (board only) |
| Supported OS | Windows NT, Windows 95/98, DOS |
| Isolation Type | Optical, 2 kV DC |
| ESD Protection | ±25 kV (contact discharge) |
| EFT Protection | ±2 kV |
| Compliance | PCI 2.1, CE, FCC Class A (typical for Moxa industrial boards) |
### 4. Functionality
The CP‑132IS provides two asynchronous serial communication channels that can be configured individually for RS‑422 or RS‑485 operation. Each port supports either:
- RS‑422 Full‑Duplex: Point‑to‑point or broadcast communication up to 10 Mbps over distances up to 4000 ft (1200 m).
- RS‑485 Half‑Duplex: Multi‑drop communication supporting up to 32 devices per port.
Automatic Data Direction Control (ADDC) hardware manages transmit/receive switching in RS‑485 mode, allowing transparent half‑duplex communication without software intervention. Alternatively, users can select By RTS Mode for legacy applications that manually toggle RTS.
Use Cases and Applications:
- Industrial automation and process control systems
- Factory data acquisition and SCADA networks
- Remote serial device management
- Multi‑point sensor or actuator networks
- Industrial PC integration for RS‑422/485 instrumentation
Compatibility:
The CP‑132IS is compatible with standard PCI slots in desktop or industrial PCs. It supports Windows NT/95/98 and DOS environments, with Moxa drivers conforming to the Win32 COMM API. The board can coexist with other PCI devices, provided unique IRQ and I/O resources are available.
### 5. Components & Accessories
Package Contents:
- 1 × Industio CP‑132IS 2‑Port PCI Serial Board
- 1 × Moxa Software CD‑ROM containing:
- Windows NT/95/98 and DOS drivers
- `PComm Lite` programming library and utilities
- `API‑232` programming library and utilities
- PDF user manuals and documentation
- Printed or electronic User’s Manual
Connectors:
- Two DB9 male connectors on the bracket for direct cable connection.
- Each port supports RS‑422 or RS‑485 pinouts as defined below.
Optional Accessories:
- RS‑422/485 shielded cables
- Terminal block adapters for field wiring
- PCI slot brackets and mounting screws (included with board)
Pin Assignments:
*RS‑422 Mode (DB9 Male)*
1 TxD–(A) 2 TxD+(B) 3 RxD+(B) 4 RxD–(A) 5 GND 6 RTS–(A) 7 RTS+(B) 8 CTS+(B) 9 CTS–(A)
*RS‑485 Mode (DB9 Male)*
1 Data–(A) 2 Data+(B) 5 GND
### 6. Installation & Setup
Hardware Installation Steps:
1. Power off the PC and remove the cover.
2. Insert the CP‑132IS into an available 32‑bit PCI slot.
3. Secure the board with the bracket screw.
4. Replace the system cover and power on the PC.
5. The PCI BIOS automatically assigns IRQ and I/O addresses.
6. Proceed with driver installation.
Default Factory Settings:
- Interface Switch (SW2): ON → RS‑485 mode for both ports
- Data Mode Switch (SW1): ON → Automatic Data Direction Control
- Termination Resistor Jumpers (JP1/JP2): Open → Not used
Configuration Options:
- SW2 (Interface Switch): ON = RS‑485, OFF = RS‑422
- SW1 (Data Mode Switch): ON = ADDC Mode, OFF = By RTS Mode
- JP1/JP2 (Termination Resistors): Short = Enable 120 Ω termination, Open = Disable
Software Installation:
- Windows NT: Install via Control Panel → Network → Adapters → Add → Have Disk. Configure COM port mapping, FIFO levels, and board properties.
- Windows 95/98: Plug‑and‑Play detection; specify driver path (A:\Windows.95). Configure COM numbers and FIFO settings.
- DOS: Run `DOSINST.EXE` to install API‑232 drivers, then configure ports using `SETUP.EXE`.
Driver Configuration:
- Assign COM numbers (up to COM256 for NT, COM128 for 95/98).
- Adjust Rx FIFO Trigger (1, 4, 8, 14 bytes) and Tx FIFO Size (1–16 bytes).
- Up to four boards can be configured simultaneously.
### 7. Performance & Capabilities
- Maximum Data Rate: 921.6 Kbps per port
- Transmission Distance: Up to 4000 ft (1200 m) for RS‑422
- Multi‑Drop Capacity: Up to 32 devices per RS‑485 port
- FIFO Buffers: 32‑byte Tx/Rx per port
- Flow Control: Hardware (RTS/CTS) and software (XON/XOFF)
- Data Integrity: Optical isolation and surge protection ensure stable operation in electrically noisy environments.
- Efficiency: ADDC hardware minimizes CPU overhead for RS‑485 half‑duplex communication.
- Limitations: Supports only 2‑wire half‑duplex RS‑485 mode (no 4‑wire RS‑485). Requires available IRQ resources for each board.
### 8. Standards & Compliance
- PCI Specification: Version 2.1 compliant
- Electrical Isolation: 2 kV DC optical isolation between board and field devices
- Surge/ESD/EFT Protection: 25 kV ESD (contact discharge), 2 kV EFT burst
- Environmental: Operating temperature 0 – 55 °C; industrial ambient conditions
- Software Standards: Win32 COMM API compliant drivers for Windows NT/95/98
- Industry Standards: RS‑422 and RS‑485 TIA/EIA specifications
- Regulatory Compliance: Designed to meet CE and FCC Class A industrial EMC requirements (typical for Moxa industrial boards).
### 9. Additional Information
Warranty & Support:
Moxa provides standard limited warranty coverage (typically 3 years for industrial boards). Technical support, driver updates, and documentation are available through Moxa’s Internet services:
- Technical Support Email: support@moxa.com.tw
- FTP Driver Updates: ftp.moxa.com / ftp.moxa.com.tw (user ID: ftp, password: your email address)
- Web Resources: www.moxa.com – product information, manuals, and software downloads
Maintenance:
The CP‑132IS requires no routine maintenance other than ensuring proper environmental conditions and secure cable connections. Firmware and driver updates can be downloaded from Moxa’s FTP site.
Software Tools:
- `PComm` for Windows NT/95/98: Provides a serial communication library, diagnostic utility, monitor, and terminal emulator supporting VT100/ANSI modes and file transfer protocols (ASCII, XMODEM, YMODEM, ZMODEM, KERMIT).
- `API‑232` for DOS: Offers C, Pascal, BASIC, and Assembly libraries for serial programming and utilities such as Data Scope and Diagnose.
- Diagnostics: Built‑in tests for IRQ, TxD/RxD, CTS/RTS, DTR/DSR, and loopback verification.
Troubleshooting Highlights:
- Verify board seating and available IRQ resources if the driver cannot detect the board.
- Check cable wiring and termination for communication errors.
- Use `PComm` Diagnostic utility to test port status and signal integrity.
- For Windows NT/95/98, reconfigure COM numbers to avoid conflicts.
Return & RMA Procedure:
For repairs or replacement, customers must complete a Problem Report Form (PRF), obtain an RMA number, and return the product in anti‑static packaging with a description of the issue.
### Summary
The Moxa Industio CP‑132IS is a robust, high‑performance, dual‑port PCI serial communication board tailored for industrial environments requiring reliable RS‑422/RS‑485 connectivity. With its combination of 2 kV optical isolation, 25 kV ESD protection, and ADDC hardware for RS‑485, it ensures stable data transmission even in electrically noisy conditions. The board’s plug‑and‑play PCI architecture, comprehensive driver support, and powerful software tools make it an ideal solution for system integrators and engineers developing industrial automation, data acquisition, and remote control systems.
Its compact design, flexible configuration options, and adherence to industry standards position the CP‑132IS as a dependable interface for connecting PCs to serial field devices across a wide range of industrial applications.
### 1. Product Overview
Product Name: Industio CP‑132IS
Model: CP‑132IS
Series: Industio CP‑132 Series
Article Number: CP‑132IS
Manufacturer: Moxa Technologies Co., Ltd.
Manufacturer Contact:
Tel: +886‑2‑8665‑6373 Fax: +886‑2‑8665‑6372
Website: [www.moxa.com](https://www.moxa.com) Email: support@moxa.com.tw
The Moxa Industio CP‑132IS is a two‑port industrial serial communication board designed for the PCI bus. It provides robust RS‑422/RS‑485 connectivity with integrated surge and optical isolation protection. As part of Moxa’s Industio CP‑132 Series, the CP‑132IS is engineered for industrial automation, data acquisition, and remote device control applications that require reliable, high‑speed, and noise‑immune serial communication.
### 2. Key Features
- Dual RS‑422/RS‑485 Ports: Two independent asynchronous serial ports supporting either RS‑422 full‑duplex or RS‑485 half/full‑duplex communication.
- High‑Speed Data Transfer: Supports baud rates from 50 bps up to 921.6 Kbps per port.
- 16550‑Compatible UART: Each port uses a 16C550C UART with 32‑byte transmit/receive FIFO buffers and hardware flow control to prevent data loss at high speeds.
- Automatic Data Direction Control (ADDC): Built‑in hardware intelligence for RS‑485 half‑duplex operation eliminates the need for software‑based RTS control.
- Surge and Isolation Protection:
- Optical isolation up to 2 kV DC between board and field devices.
- Surge protection up to 25 kV ESD and 2 kV EFT on all signal lines.
- Termination Resistors On‑Board: 120 Ω termination resistors are jumper‑selectable for impedance matching in RS‑422/485 networks.
- Plug‑and‑Play PCI Interface: Fully compliant with PCI 2.1 specification; IRQ and I/O addresses are automatically assigned by the PCI BIOS—no DIP switches or jumpers required.
- Compact Half‑Size Board: 120 mm × 80 mm form factor suitable for standard PCI slots.
- Multi‑Board Support: Up to four CP‑132 Series boards can be installed in a single system.
- Comprehensive Software Support: Drivers for Windows NT, Windows 95/98, and DOS; includes Moxa’s `PComm` and `API‑232` programming libraries and utilities.
- Industrial‑Grade Reliability: Designed for harsh environments such as factory automation and process control systems.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Bus Interface | 32‑bit PCI, compliant with PCI 2.1 |
| Number of Ports | 2 independent RS‑422/RS‑485 ports |
| Maximum Boards per System | 4 |
| Communication Controller | 16C550C UART or compatible |
| Baud Rate Range | 50 bps – 921.6 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity Options | None, Even, Odd, Space, Mark |
| Signal Lines (RS‑422) | TxD±, RxD±, RTS±, CTS±, GND |
| Signal Lines (RS‑485) | Data±, GND |
| Connectors | 2 × DB9 male |
| Optical Isolation | 2 kV DC (CP‑132I, CP‑132IS) |
| Surge Protection | ESD 25 kV max, EFT 2 kV max (CP‑132S, CP‑132IS) |
| Termination Resistor | 120 Ω jumper‑selectable |
| Power Requirements | +5 V DC, 710 mA max (CP‑132IS) |
| Operating Temperature | 0 °C – 55 °C |
| Dimensions | 120 mm × 80 mm |
| Weight | Approx. 100 g (board only) |
| Supported OS | Windows NT, Windows 95/98, DOS |
| Isolation Type | Optical, 2 kV DC |
| ESD Protection | ±25 kV (contact discharge) |
| EFT Protection | ±2 kV |
| Compliance | PCI 2.1, CE, FCC Class A (typical for Moxa industrial boards) |
### 4. Functionality
The CP‑132IS provides two asynchronous serial communication channels that can be configured individually for RS‑422 or RS‑485 operation. Each port supports either:
- RS‑422 Full‑Duplex: Point‑to‑point or broadcast communication up to 10 Mbps over distances up to 4000 ft (1200 m).
- RS‑485 Half‑Duplex: Multi‑drop communication supporting up to 32 devices per port.
Automatic Data Direction Control (ADDC) hardware manages transmit/receive switching in RS‑485 mode, allowing transparent half‑duplex communication without software intervention. Alternatively, users can select By RTS Mode for legacy applications that manually toggle RTS.
Use Cases and Applications:
- Industrial automation and process control systems
- Factory data acquisition and SCADA networks
- Remote serial device management
- Multi‑point sensor or actuator networks
- Industrial PC integration for RS‑422/485 instrumentation
Compatibility:
The CP‑132IS is compatible with standard PCI slots in desktop or industrial PCs. It supports Windows NT/95/98 and DOS environments, with Moxa drivers conforming to the Win32 COMM API. The board can coexist with other PCI devices, provided unique IRQ and I/O resources are available.
### 5. Components & Accessories
Package Contents:
- 1 × Industio CP‑132IS 2‑Port PCI Serial Board
- 1 × Moxa Software CD‑ROM containing:
- Windows NT/95/98 and DOS drivers
- `PComm Lite` programming library and utilities
- `API‑232` programming library and utilities
- PDF user manuals and documentation
- Printed or electronic User’s Manual
Connectors:
- Two DB9 male connectors on the bracket for direct cable connection.
- Each port supports RS‑422 or RS‑485 pinouts as defined below.
Optional Accessories:
- RS‑422/485 shielded cables
- Terminal block adapters for field wiring
- PCI slot brackets and mounting screws (included with board)
Pin Assignments:
*RS‑422 Mode (DB9 Male)*
1 TxD–(A) 2 TxD+(B) 3 RxD+(B) 4 RxD–(A) 5 GND 6 RTS–(A) 7 RTS+(B) 8 CTS+(B) 9 CTS–(A)
*RS‑485 Mode (DB9 Male)*
1 Data–(A) 2 Data+(B) 5 GND
### 6. Installation & Setup
Hardware Installation Steps:
1. Power off the PC and remove the cover.
2. Insert the CP‑132IS into an available 32‑bit PCI slot.
3. Secure the board with the bracket screw.
4. Replace the system cover and power on the PC.
5. The PCI BIOS automatically assigns IRQ and I/O addresses.
6. Proceed with driver installation.
Default Factory Settings:
- Interface Switch (SW2): ON → RS‑485 mode for both ports
- Data Mode Switch (SW1): ON → Automatic Data Direction Control
- Termination Resistor Jumpers (JP1/JP2): Open → Not used
Configuration Options:
- SW2 (Interface Switch): ON = RS‑485, OFF = RS‑422
- SW1 (Data Mode Switch): ON = ADDC Mode, OFF = By RTS Mode
- JP1/JP2 (Termination Resistors): Short = Enable 120 Ω termination, Open = Disable
Software Installation:
- Windows NT: Install via Control Panel → Network → Adapters → Add → Have Disk. Configure COM port mapping, FIFO levels, and board properties.
- Windows 95/98: Plug‑and‑Play detection; specify driver path (A:\Windows.95). Configure COM numbers and FIFO settings.
- DOS: Run `DOSINST.EXE` to install API‑232 drivers, then configure ports using `SETUP.EXE`.
Driver Configuration:
- Assign COM numbers (up to COM256 for NT, COM128 for 95/98).
- Adjust Rx FIFO Trigger (1, 4, 8, 14 bytes) and Tx FIFO Size (1–16 bytes).
- Up to four boards can be configured simultaneously.
### 7. Performance & Capabilities
- Maximum Data Rate: 921.6 Kbps per port
- Transmission Distance: Up to 4000 ft (1200 m) for RS‑422
- Multi‑Drop Capacity: Up to 32 devices per RS‑485 port
- FIFO Buffers: 32‑byte Tx/Rx per port
- Flow Control: Hardware (RTS/CTS) and software (XON/XOFF)
- Data Integrity: Optical isolation and surge protection ensure stable operation in electrically noisy environments.
- Efficiency: ADDC hardware minimizes CPU overhead for RS‑485 half‑duplex communication.
- Limitations: Supports only 2‑wire half‑duplex RS‑485 mode (no 4‑wire RS‑485). Requires available IRQ resources for each board.
### 8. Standards & Compliance
- PCI Specification: Version 2.1 compliant
- Electrical Isolation: 2 kV DC optical isolation between board and field devices
- Surge/ESD/EFT Protection: 25 kV ESD (contact discharge), 2 kV EFT burst
- Environmental: Operating temperature 0 – 55 °C; industrial ambient conditions
- Software Standards: Win32 COMM API compliant drivers for Windows NT/95/98
- Industry Standards: RS‑422 and RS‑485 TIA/EIA specifications
- Regulatory Compliance: Designed to meet CE and FCC Class A industrial EMC requirements (typical for Moxa industrial boards).
### 9. Additional Information
Warranty & Support:
Moxa provides standard limited warranty coverage (typically 3 years for industrial boards). Technical support, driver updates, and documentation are available through Moxa’s Internet services:
- Technical Support Email: support@moxa.com.tw
- FTP Driver Updates: ftp.moxa.com / ftp.moxa.com.tw (user ID: ftp, password: your email address)
- Web Resources: www.moxa.com – product information, manuals, and software downloads
Maintenance:
The CP‑132IS requires no routine maintenance other than ensuring proper environmental conditions and secure cable connections. Firmware and driver updates can be downloaded from Moxa’s FTP site.
Software Tools:
- `PComm` for Windows NT/95/98: Provides a serial communication library, diagnostic utility, monitor, and terminal emulator supporting VT100/ANSI modes and file transfer protocols (ASCII, XMODEM, YMODEM, ZMODEM, KERMIT).
- `API‑232` for DOS: Offers C, Pascal, BASIC, and Assembly libraries for serial programming and utilities such as Data Scope and Diagnose.
- Diagnostics: Built‑in tests for IRQ, TxD/RxD, CTS/RTS, DTR/DSR, and loopback verification.
Troubleshooting Highlights:
- Verify board seating and available IRQ resources if the driver cannot detect the board.
- Check cable wiring and termination for communication errors.
- Use `PComm` Diagnostic utility to test port status and signal integrity.
- For Windows NT/95/98, reconfigure COM numbers to avoid conflicts.
Return & RMA Procedure:
For repairs or replacement, customers must complete a Problem Report Form (PRF), obtain an RMA number, and return the product in anti‑static packaging with a description of the issue.
### Summary
The Moxa Industio CP‑132IS is a robust, high‑performance, dual‑port PCI serial communication board tailored for industrial environments requiring reliable RS‑422/RS‑485 connectivity. With its combination of 2 kV optical isolation, 25 kV ESD protection, and ADDC hardware for RS‑485, it ensures stable data transmission even in electrically noisy conditions. The board’s plug‑and‑play PCI architecture, comprehensive driver support, and powerful software tools make it an ideal solution for system integrators and engineers developing industrial automation, data acquisition, and remote control systems.
Its compact design, flexible configuration options, and adherence to industry standards position the CP‑132IS as a dependable interface for connecting PCs to serial field devices across a wide range of industrial applications.
-
CP-132.pdf
Manual
No accessories available.
