LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
- Port Configuration: 8 × 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDIX and 2 × 100/1000Base‑X SFP slots.
- Optical Bypass: Two LC single‑mode bypass ports maintain network integrity during power loss or maintenance.
- Redundancy Technologies:
- O‑Ring (recovery < 10 ms over 250 nodes)
- Open‑Ring for interoperability with third‑party ring systems
- O‑Chain for multi‑ring compound topologies
- STP/RSTP/MSTP (IEEE 802.1D/w/s) and MRP (IEC 62439) support
- Management Interfaces: Web GUI, Telnet, RS‑232 console (CLI), and centralized Windows utility Open‑Vision for multi‑device monitoring.
- Industrial Design: IP‑30 metal enclosure, fanless operation, extended temperature range –40 °C to +70 °C.
- High Reliability: Dual 100–240 VAC redundant power inputs with overload protection; relay output for fault alarms.
- Performance: 5.6 Gbps switching bandwidth, 7 µs latency, 8192 MAC addresses, 4 priority queues, 4096 VLANs, 1024 multicast groups.
- Security: 802.1x port‑based authentication, MAC‑based port security, RADIUS integration, SNMP v1/v2c/v3 with encryption, IP Guard, and management access control.
- Quality of Service: IEEE 802.1p/COS, TOS/DSCP, port‑based prioritization, and weighted fair or strict queue scheduling.
- Time Synchronization: SNTP and IEEE 1588 PTP client for precise clock alignment.
- Diagnostics & Alerts: Syslog, SMTP email notifications, SNMP traps, and relay fault output.
- Protocol Support: Modbus TCP, LLDP, IGMP v2/v3 snooping, DHCP Server/Client, MVR, VLAN Q‑in‑Q, and port trunking (LACP 802.3ad).
- Optical Bypass: Two LC single‑mode bypass ports maintain network integrity during power loss or maintenance.
- Redundancy Technologies:
- O‑Ring (recovery < 10 ms over 250 nodes)
- Open‑Ring for interoperability with third‑party ring systems
- O‑Chain for multi‑ring compound topologies
- STP/RSTP/MSTP (IEEE 802.1D/w/s) and MRP (IEC 62439) support
- Management Interfaces: Web GUI, Telnet, RS‑232 console (CLI), and centralized Windows utility Open‑Vision for multi‑device monitoring.
- Industrial Design: IP‑30 metal enclosure, fanless operation, extended temperature range –40 °C to +70 °C.
- High Reliability: Dual 100–240 VAC redundant power inputs with overload protection; relay output for fault alarms.
- Performance: 5.6 Gbps switching bandwidth, 7 µs latency, 8192 MAC addresses, 4 priority queues, 4096 VLANs, 1024 multicast groups.
- Security: 802.1x port‑based authentication, MAC‑based port security, RADIUS integration, SNMP v1/v2c/v3 with encryption, IP Guard, and management access control.
- Quality of Service: IEEE 802.1p/COS, TOS/DSCP, port‑based prioritization, and weighted fair or strict queue scheduling.
- Time Synchronization: SNTP and IEEE 1588 PTP client for precise clock alignment.
- Diagnostics & Alerts: Syslog, SMTP email notifications, SNMP traps, and relay fault output.
- Protocol Support: Modbus TCP, LLDP, IGMP v2/v3 snooping, DHCP Server/Client, MVR, VLAN Q‑in‑Q, and port trunking (LACP 802.3ad).
Comprehensive Product Summary – ORing DES‑3082GP‑SS‑AIO‑S Industrial Managed Ethernet Switch
*(Approx. 12,000 characters / ~3,000 tokens)*
### 1. Product Overview
Product Name: Industrial Managed Desktop Ethernet Switch
Model: DES‑3082GP‑SS‑AIO‑S
Series: DES‑3082GP‑AIO_S Series
Article Number: DES‑3082GP‑SS‑AIO‑S
Manufacturer: ORing Industrial Networking Corp., Taiwan
The ORing DES‑3082GP‑SS‑AIO‑S is a rugged, industrial‑grade, managed Ethernet switch designed for mission‑critical networking environments requiring high reliability, redundancy, and advanced management capabilities. It belongs to ORing’s DES‑3082GP‑AIO_S series of 10‑port managed desktop switches featuring dual Gigabit SFP uplinks, eight Fast Ethernet copper ports, and dual optical bypass LC connectors for single‑mode fiber. The switch integrates ORing’s proprietary O‑Ring redundancy technology, providing sub‑10 ms recovery across up to 250 interconnected units, ensuring continuous network operation even under fault conditions.
### 2. Key Features
- Port Configuration: 8 × 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDIX and 2 × 100/1000Base‑X SFP slots.
- Optical Bypass: Two LC single‑mode bypass ports maintain network integrity during power loss or maintenance.
- Redundancy Technologies:
- O‑Ring (recovery < 10 ms over 250 nodes)
- Open‑Ring for interoperability with third‑party ring systems
- O‑Chain for multi‑ring compound topologies
- STP/RSTP/MSTP (IEEE 802.1D/w/s) and MRP (IEC 62439) support
- Management Interfaces: Web GUI, Telnet, RS‑232 console (CLI), and centralized Windows utility Open‑Vision for multi‑device monitoring.
- Industrial Design: IP‑30 metal enclosure, fanless operation, extended temperature range –40 °C to +70 °C.
- High Reliability: Dual 100–240 VAC redundant power inputs with overload protection; relay output for fault alarms.
- Performance: 5.6 Gbps switching bandwidth, 7 µs latency, 8192 MAC addresses, 4 priority queues, 4096 VLANs, 1024 multicast groups.
- Security: 802.1x port‑based authentication, MAC‑based port security, RADIUS integration, SNMP v1/v2c/v3 with encryption, IP Guard, and management access control.
- Quality of Service: IEEE 802.1p/COS, TOS/DSCP, port‑based prioritization, and weighted fair or strict queue scheduling.
- Time Synchronization: SNTP and IEEE 1588 PTP client for precise clock alignment.
- Diagnostics & Alerts: Syslog, SMTP email notifications, SNMP traps, and relay fault output.
- Protocol Support: Modbus TCP, LLDP, IGMP v2/v3 snooping, DHCP Server/Client, MVR, VLAN Q‑in‑Q, and port trunking (LACP 802.3ad).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Ethernet Ports | 8 × 10/100Base‑T(X) RJ‑45 (Auto MDI/MDIX) |
| SFP Ports | 2 × 100/1000Base‑X SFP slots |
| Bypass Ports | 2 × LC single‑mode optical bypass |
| Switching Bandwidth | 5.6 Gbps |
| Switching Latency | 7 µs |
| MAC Address Table | 8192 entries |
| VLANs Supported | 4096 IEEE 802.1Q VLANs |
| Priority Queues | 4 hardware queues |
| IGMP Groups | 1024 multicast groups |
| Processing Type | Store‑and‑Forward |
| Power Input | Dual 100–240 VAC (50/60 Hz) in single socket |
| Power Consumption | 24.2 W @ 100 VAC / 35.76 W @ 240 VAC |
| Protection | Overload current protection |
| Relay Output | 1 A @ 24 VDC for fault alarm |
| Enclosure Rating | IP‑30 metal housing |
| Dimensions (W × D × H) | 300 × 165 × 88 mm (11.8 × 6.5 × 3.47 in) |
| Weight | 2350 g |
| Operating Temperature | –40 °C to +70 °C (–40 °F to +158 °F) |
| Storage Temperature | –40 °C to +85 °C (–40 °F to +185 °F) |
| Humidity | 5 % – 95 % non‑condensing |
| EMI/EMS Compliance | FCC Part 15 Class A, EN55022 Class A, EN61000‑4‑2/3/4/5/6/8/11 |
| Shock / Vibration / Drop | IEC 60068‑2‑27 / ‑2‑6 / ‑2‑32 |
| Safety | EN 60950‑1 |
| Warranty | 5 years |
### 4. Functionality and Applications
The DES‑3082GP‑SS‑AIO‑S functions as a fully managed Layer 2 industrial Ethernet switch with advanced redundancy and management features. It is optimized for automation, transportation, energy, and surveillance networks where uninterrupted communication is essential.
Operation Principle:
- Under normal conditions, all ports operate in standard switching mode.
- The integrated optical bypass ensures that when the switch loses power, the optical path between upstream and downstream devices remains physically connected, maintaining network continuity.
- O‑Ring and O‑Chain technologies provide ultra‑fast failover by dynamically re‑routing traffic within milliseconds.
- Management and configuration are accessible via web browser, Telnet, RS‑232 console, or the Open‑Vision software suite, allowing centralized control of multiple ORing devices.
Typical Use Cases:
- Industrial automation control networks (PLC, SCADA, Modbus TCP).
- Intelligent transportation systems and traffic monitoring.
- Power substation and renewable energy communication backbones.
- IP surveillance and security systems requiring fiber uplinks and redundancy.
- Factory or process control environments with harsh temperature and EMI conditions.
Compatibility:
Supports standard Ethernet protocols (IEEE 802.3/802.3u/802.3z) and interoperates with third‑party network equipment through Open‑Ring and standard STP/RSTP/MSTP mechanisms.
### 5. Components & Accessories
Included in Package:
- DES‑3082GP‑SS‑AIO‑S switch unit
- AC power cable (region‑specific: US or EU)
- RS‑232 console cable (DB‑9 F to RJ‑45)
- ORing Tool CD (Open‑Vision utility and documentation)
- Quick Installation Guide
Optional Accessories (sold separately):
- Open‑Vision M500: Windows‑based network management suite supporting up to 500 IP devices.
- SFP100 Series: 100 Mbps SFP optical transceivers.
- SFP 1G Series: 1 Gbps SFP optical transceivers.
- Rack‑Mount Kit: For 19‑inch rack installation.
### 6. Installation & Setup
Mounting Options:
- Desktop placement (default).
- Optional rack‑mount kit for 19‑inch cabinets.
- Wall or DIN‑rail mounting supported via accessory brackets.
Power Connection:
- Dual redundant 100–240 VAC inputs in a single socket; automatic failover ensures uninterrupted operation.
- Integrated overload current protection safeguards internal circuits.
Network Cabling:
- Copper Ports: CAT 5/5e UTP, up to 100 m.
- Fiber Ports: LC single‑mode (typical 10–60 km depending on SFP).
- Console Port: RS‑232 DB‑9 F to RJ‑45, 9600 bps, 8‑N‑1.
Initial Configuration:
- Default IP 192.168.10.1 / 24, gateway 192.168.10.254.
- Default credentials: admin / admin.
- Configuration via web browser, Telnet, or console.
- Supports firmware upgrade and configuration backup/restore via TFTP or local PC.
LED Indicators:
- PWR (×3 Green): Power 1/2/3 status.
- R.M (Green): O‑Ring Master mode active.
- Ring (Green): O‑Ring enabled.
- Fault (Amber): System fault or alarm.
- Port LEDs: Link/Activity (Green), Duplex/Collision (Amber).
### 7. Performance & Capabilities
- Switching Fabric: 5.6 Gbps non‑blocking architecture.
- Latency: 7 µs typical for 64‑byte frames.
- Throughput: Wire‑speed forwarding on all ports.
- Jumbo Frame Support: Up to 9.6 KB.
- Redundancy Recovery: < 10 ms (O‑Ring), < 30 ms (Open‑Ring/MRP).
- QoS: Four hardware queues with selectable scheduling (8:4:2:1 weighted or strict priority).
- Bandwidth Control: Per‑port ingress/egress rate limiting.
- Multicast Efficiency: IGMP v2/v3 snooping and MVR for optimized video streaming.
- Security:
- 802.1x authentication with RADIUS.
- MAC blacklist and static MAC forwarding.
- IP Guard for IP/MAC/port binding.
- Management access restriction by IP list.
- Diagnostics: Port statistics, traffic monitoring, loop guard, port mirroring (TX/RX/Both), and system event logs.
- Time Services: SNTP and PTP client for sub‑microsecond synchronization in automation systems.
- Management Scalability: Supports up to 250 devices in a single O‑Ring topology with centralized supervision via Open‑Vision.
Limitations:
- Layer 2 switching only (no Layer 3 routing).
- Optical bypass limited to two LC ports.
- Power input restricted to AC 100–240 V (single socket).
### 8. Standards & Compliance
Ethernet Standards:
IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX/FX), 802.3z (1000Base‑X), 802.3x (flow control), 802.3ad (LACP).
Bridging & VLAN:
IEEE 802.1D (STP), 802.1w (RSTP), 802.1s (MSTP), 802.1Q (VLAN tagging), 802.1p (CoS), 802.1x (authentication), 802.1AB (LLDP).
Environmental & Safety Compliance:
- EMI: FCC Part 15 Class A, CISPR EN55022 Class A.
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS), ‑4‑8 (Magnetic Field), ‑4‑11 (Dip/Interruption).
- Mechanical: IEC 60068‑2‑27 (Shock), ‑2‑6 (Vibration), ‑2‑32 (Free Fall).
- Safety: EN 60950‑1 (Information Technology Equipment Safety).
Industry Protocols:
Supports Modbus TCP for integration with industrial control systems and SCADA environments.
### 9. Additional Information
Warranty & Support:
- Standard 5‑year limited warranty covering defects in materials and workmanship.
- Technical support via support@oring‑networking.com.
- Firmware updates and documentation available at [www.oring‑networking.com](http://www.oring-networking.com).
Maintenance:
- Fanless design minimizes maintenance.
- Configuration backup and restore via TFTP or local PC.
- Firmware upgrade supported through web interface or CLI.
- Event logging and email/SNMP alerts facilitate proactive maintenance.
Software Management – Open‑Vision Utility:
- Centralized management of up to 500 devices.
- Real‑time topology visualization, traffic monitoring, and event logging.
- Supports configuration templates, firmware distribution, and alarm notifications.
Ordering Variants:
| Model | Description |
|------------|----------------|
| DES‑3082GP‑SS‑AIO_S‑US | Single‑mode LC bypass, US power cord |
| DES‑3082GP‑SS‑AIO_S‑EU | Single‑mode LC bypass, EU power cord |
| DES‑3082GP‑MM‑AIO_S‑US | Multi‑mode LC bypass, US power cord |
| DES‑3082GP‑MM‑AIO_S‑EU | Multi‑mode LC bypass, EU power cord |
### Summary
The ORing DES‑3082GP‑SS‑AIO‑S is a high‑performance, industrial‑grade managed Ethernet switch engineered for environments demanding continuous uptime and deterministic communication. Its combination of dual Gigabit SFP uplinks, eight Fast Ethernet ports, optical bypass protection, and ORing’s proprietary redundancy technologies make it ideal for automation, transportation, and energy networks. With comprehensive management interfaces, robust security, and compliance with international industrial standards, the DES‑3082GP‑SS‑AIO‑S delivers exceptional reliability, flexibility, and control for modern industrial Ethernet infrastructures.
*(Approx. 12,000 characters / ~3,000 tokens)*
### 1. Product Overview
Product Name: Industrial Managed Desktop Ethernet Switch
Model: DES‑3082GP‑SS‑AIO‑S
Series: DES‑3082GP‑AIO_S Series
Article Number: DES‑3082GP‑SS‑AIO‑S
Manufacturer: ORing Industrial Networking Corp., Taiwan
The ORing DES‑3082GP‑SS‑AIO‑S is a rugged, industrial‑grade, managed Ethernet switch designed for mission‑critical networking environments requiring high reliability, redundancy, and advanced management capabilities. It belongs to ORing’s DES‑3082GP‑AIO_S series of 10‑port managed desktop switches featuring dual Gigabit SFP uplinks, eight Fast Ethernet copper ports, and dual optical bypass LC connectors for single‑mode fiber. The switch integrates ORing’s proprietary O‑Ring redundancy technology, providing sub‑10 ms recovery across up to 250 interconnected units, ensuring continuous network operation even under fault conditions.
### 2. Key Features
- Port Configuration: 8 × 10/100Base‑T(X) RJ‑45 ports with auto MDI/MDIX and 2 × 100/1000Base‑X SFP slots.
- Optical Bypass: Two LC single‑mode bypass ports maintain network integrity during power loss or maintenance.
- Redundancy Technologies:
- O‑Ring (recovery < 10 ms over 250 nodes)
- Open‑Ring for interoperability with third‑party ring systems
- O‑Chain for multi‑ring compound topologies
- STP/RSTP/MSTP (IEEE 802.1D/w/s) and MRP (IEC 62439) support
- Management Interfaces: Web GUI, Telnet, RS‑232 console (CLI), and centralized Windows utility Open‑Vision for multi‑device monitoring.
- Industrial Design: IP‑30 metal enclosure, fanless operation, extended temperature range –40 °C to +70 °C.
- High Reliability: Dual 100–240 VAC redundant power inputs with overload protection; relay output for fault alarms.
- Performance: 5.6 Gbps switching bandwidth, 7 µs latency, 8192 MAC addresses, 4 priority queues, 4096 VLANs, 1024 multicast groups.
- Security: 802.1x port‑based authentication, MAC‑based port security, RADIUS integration, SNMP v1/v2c/v3 with encryption, IP Guard, and management access control.
- Quality of Service: IEEE 802.1p/COS, TOS/DSCP, port‑based prioritization, and weighted fair or strict queue scheduling.
- Time Synchronization: SNTP and IEEE 1588 PTP client for precise clock alignment.
- Diagnostics & Alerts: Syslog, SMTP email notifications, SNMP traps, and relay fault output.
- Protocol Support: Modbus TCP, LLDP, IGMP v2/v3 snooping, DHCP Server/Client, MVR, VLAN Q‑in‑Q, and port trunking (LACP 802.3ad).
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Ethernet Ports | 8 × 10/100Base‑T(X) RJ‑45 (Auto MDI/MDIX) |
| SFP Ports | 2 × 100/1000Base‑X SFP slots |
| Bypass Ports | 2 × LC single‑mode optical bypass |
| Switching Bandwidth | 5.6 Gbps |
| Switching Latency | 7 µs |
| MAC Address Table | 8192 entries |
| VLANs Supported | 4096 IEEE 802.1Q VLANs |
| Priority Queues | 4 hardware queues |
| IGMP Groups | 1024 multicast groups |
| Processing Type | Store‑and‑Forward |
| Power Input | Dual 100–240 VAC (50/60 Hz) in single socket |
| Power Consumption | 24.2 W @ 100 VAC / 35.76 W @ 240 VAC |
| Protection | Overload current protection |
| Relay Output | 1 A @ 24 VDC for fault alarm |
| Enclosure Rating | IP‑30 metal housing |
| Dimensions (W × D × H) | 300 × 165 × 88 mm (11.8 × 6.5 × 3.47 in) |
| Weight | 2350 g |
| Operating Temperature | –40 °C to +70 °C (–40 °F to +158 °F) |
| Storage Temperature | –40 °C to +85 °C (–40 °F to +185 °F) |
| Humidity | 5 % – 95 % non‑condensing |
| EMI/EMS Compliance | FCC Part 15 Class A, EN55022 Class A, EN61000‑4‑2/3/4/5/6/8/11 |
| Shock / Vibration / Drop | IEC 60068‑2‑27 / ‑2‑6 / ‑2‑32 |
| Safety | EN 60950‑1 |
| Warranty | 5 years |
### 4. Functionality and Applications
The DES‑3082GP‑SS‑AIO‑S functions as a fully managed Layer 2 industrial Ethernet switch with advanced redundancy and management features. It is optimized for automation, transportation, energy, and surveillance networks where uninterrupted communication is essential.
Operation Principle:
- Under normal conditions, all ports operate in standard switching mode.
- The integrated optical bypass ensures that when the switch loses power, the optical path between upstream and downstream devices remains physically connected, maintaining network continuity.
- O‑Ring and O‑Chain technologies provide ultra‑fast failover by dynamically re‑routing traffic within milliseconds.
- Management and configuration are accessible via web browser, Telnet, RS‑232 console, or the Open‑Vision software suite, allowing centralized control of multiple ORing devices.
Typical Use Cases:
- Industrial automation control networks (PLC, SCADA, Modbus TCP).
- Intelligent transportation systems and traffic monitoring.
- Power substation and renewable energy communication backbones.
- IP surveillance and security systems requiring fiber uplinks and redundancy.
- Factory or process control environments with harsh temperature and EMI conditions.
Compatibility:
Supports standard Ethernet protocols (IEEE 802.3/802.3u/802.3z) and interoperates with third‑party network equipment through Open‑Ring and standard STP/RSTP/MSTP mechanisms.
### 5. Components & Accessories
Included in Package:
- DES‑3082GP‑SS‑AIO‑S switch unit
- AC power cable (region‑specific: US or EU)
- RS‑232 console cable (DB‑9 F to RJ‑45)
- ORing Tool CD (Open‑Vision utility and documentation)
- Quick Installation Guide
Optional Accessories (sold separately):
- Open‑Vision M500: Windows‑based network management suite supporting up to 500 IP devices.
- SFP100 Series: 100 Mbps SFP optical transceivers.
- SFP 1G Series: 1 Gbps SFP optical transceivers.
- Rack‑Mount Kit: For 19‑inch rack installation.
### 6. Installation & Setup
Mounting Options:
- Desktop placement (default).
- Optional rack‑mount kit for 19‑inch cabinets.
- Wall or DIN‑rail mounting supported via accessory brackets.
Power Connection:
- Dual redundant 100–240 VAC inputs in a single socket; automatic failover ensures uninterrupted operation.
- Integrated overload current protection safeguards internal circuits.
Network Cabling:
- Copper Ports: CAT 5/5e UTP, up to 100 m.
- Fiber Ports: LC single‑mode (typical 10–60 km depending on SFP).
- Console Port: RS‑232 DB‑9 F to RJ‑45, 9600 bps, 8‑N‑1.
Initial Configuration:
- Default IP 192.168.10.1 / 24, gateway 192.168.10.254.
- Default credentials: admin / admin.
- Configuration via web browser, Telnet, or console.
- Supports firmware upgrade and configuration backup/restore via TFTP or local PC.
LED Indicators:
- PWR (×3 Green): Power 1/2/3 status.
- R.M (Green): O‑Ring Master mode active.
- Ring (Green): O‑Ring enabled.
- Fault (Amber): System fault or alarm.
- Port LEDs: Link/Activity (Green), Duplex/Collision (Amber).
### 7. Performance & Capabilities
- Switching Fabric: 5.6 Gbps non‑blocking architecture.
- Latency: 7 µs typical for 64‑byte frames.
- Throughput: Wire‑speed forwarding on all ports.
- Jumbo Frame Support: Up to 9.6 KB.
- Redundancy Recovery: < 10 ms (O‑Ring), < 30 ms (Open‑Ring/MRP).
- QoS: Four hardware queues with selectable scheduling (8:4:2:1 weighted or strict priority).
- Bandwidth Control: Per‑port ingress/egress rate limiting.
- Multicast Efficiency: IGMP v2/v3 snooping and MVR for optimized video streaming.
- Security:
- 802.1x authentication with RADIUS.
- MAC blacklist and static MAC forwarding.
- IP Guard for IP/MAC/port binding.
- Management access restriction by IP list.
- Diagnostics: Port statistics, traffic monitoring, loop guard, port mirroring (TX/RX/Both), and system event logs.
- Time Services: SNTP and PTP client for sub‑microsecond synchronization in automation systems.
- Management Scalability: Supports up to 250 devices in a single O‑Ring topology with centralized supervision via Open‑Vision.
Limitations:
- Layer 2 switching only (no Layer 3 routing).
- Optical bypass limited to two LC ports.
- Power input restricted to AC 100–240 V (single socket).
### 8. Standards & Compliance
Ethernet Standards:
IEEE 802.3 (10Base‑T), 802.3u (100Base‑TX/FX), 802.3z (1000Base‑X), 802.3x (flow control), 802.3ad (LACP).
Bridging & VLAN:
IEEE 802.1D (STP), 802.1w (RSTP), 802.1s (MSTP), 802.1Q (VLAN tagging), 802.1p (CoS), 802.1x (authentication), 802.1AB (LLDP).
Environmental & Safety Compliance:
- EMI: FCC Part 15 Class A, CISPR EN55022 Class A.
- EMS: EN61000‑4‑2 (ESD), ‑4‑3 (RS), ‑4‑4 (EFT), ‑4‑5 (Surge), ‑4‑6 (CS), ‑4‑8 (Magnetic Field), ‑4‑11 (Dip/Interruption).
- Mechanical: IEC 60068‑2‑27 (Shock), ‑2‑6 (Vibration), ‑2‑32 (Free Fall).
- Safety: EN 60950‑1 (Information Technology Equipment Safety).
Industry Protocols:
Supports Modbus TCP for integration with industrial control systems and SCADA environments.
### 9. Additional Information
Warranty & Support:
- Standard 5‑year limited warranty covering defects in materials and workmanship.
- Technical support via support@oring‑networking.com.
- Firmware updates and documentation available at [www.oring‑networking.com](http://www.oring-networking.com).
Maintenance:
- Fanless design minimizes maintenance.
- Configuration backup and restore via TFTP or local PC.
- Firmware upgrade supported through web interface or CLI.
- Event logging and email/SNMP alerts facilitate proactive maintenance.
Software Management – Open‑Vision Utility:
- Centralized management of up to 500 devices.
- Real‑time topology visualization, traffic monitoring, and event logging.
- Supports configuration templates, firmware distribution, and alarm notifications.
Ordering Variants:
| Model | Description |
|------------|----------------|
| DES‑3082GP‑SS‑AIO_S‑US | Single‑mode LC bypass, US power cord |
| DES‑3082GP‑SS‑AIO_S‑EU | Single‑mode LC bypass, EU power cord |
| DES‑3082GP‑MM‑AIO_S‑US | Multi‑mode LC bypass, US power cord |
| DES‑3082GP‑MM‑AIO_S‑EU | Multi‑mode LC bypass, EU power cord |
### Summary
The ORing DES‑3082GP‑SS‑AIO‑S is a high‑performance, industrial‑grade managed Ethernet switch engineered for environments demanding continuous uptime and deterministic communication. Its combination of dual Gigabit SFP uplinks, eight Fast Ethernet ports, optical bypass protection, and ORing’s proprietary redundancy technologies make it ideal for automation, transportation, and energy networks. With comprehensive management interfaces, robust security, and compliance with international industrial standards, the DES‑3082GP‑SS‑AIO‑S delivers exceptional reliability, flexibility, and control for modern industrial Ethernet infrastructures.
-
DataSheet_DES-3082GP-AIO_S.pdf
PDF Catalog
No accessories available.
