Comprehensive Product Summary – DRP048V060W1BN DIN Rail Power Supply

---

### 1. Product Overview

Product Name: DIN Rail Power Supply
Model: DRP048V060W1BN
Series: DRP Series Industrial Power Supplies
Article Number: DRP048V060W1BN
Manufacturer: ORing Industrial Networking Corp.
Product Type: Industrial-grade DIN Rail-mounted DC Power Supply
Output Rating: 60 W @ 48 VDC
Primary Function: Converts AC mains input to regulated 48 VDC output for industrial automation, networking, and control systems.

The DRP048V060W1BN is a compact, high-efficiency DIN rail power supply designed for industrial environments requiring stable 48 VDC output power. It is part of ORing’s ruggedized power supply portfolio, engineered for reliability, wide operating temperature tolerance, and compatibility with a broad range of industrial automation and networking equipment.

---

### 2. Key Features

- High Efficiency and Reliability: Provides a regulated 48 VDC output at up to 60 W continuous power, ensuring stable operation for sensitive industrial electronics.
- Wide Input Voltage Range: Supports universal AC input (typically 100–240 VAC), allowing global deployment without manual voltage selection.
- Industrial Temperature Range: Designed for wide temperature operation, suitable for harsh environments and extended uptime applications.
- DIN Rail Mounting: Compact form factor with standard DIN rail clip for quick installation in control cabinets or industrial enclosures.
- Overload and Short-Circuit Protection: Integrated electronic protection mechanisms safeguard connected devices and the power supply itself.
- High MTBF (Mean Time Between Failures): Ensures long operational life and reduced maintenance costs.
- Compact and Lightweight Design: Optimized for space-constrained control panels.
- Compliance with Industrial Standards: Meets international safety and EMC standards for industrial power supplies.
- LED Status Indicators: Provides visual feedback for power status and fault conditions.
- Low Ripple and Noise: Ensures clean DC output for sensitive communication and control circuits.
- Energy-Efficient Design: High conversion efficiency reduces heat generation and power loss.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model Number | DRP048V060W1BN |
| Output Power | 60 W |
| Output Voltage | 48 VDC |
| Output Current | 1.25 A (nominal) |
| Input Voltage Range | 100–240 VAC (universal input) |
| Input Frequency | 47–63 Hz |
| Efficiency | Typically >85% |
| Operating Temperature | Wide range (industrial-grade, typically -40°C to +70°C) |
| Storage Temperature | -40°C to +85°C |
| Cooling Method | Convection cooling (fanless) |
| Protection Features | Overload, overvoltage, short-circuit, over-temperature |
| Mounting Type | DIN rail (EN 60715 standard) |
| Dimensions (approx.) | Compact industrial housing, typically around 90 × 55 × 110 mm (varies by model) |
| Weight | Approx. 0.5–0.7 kg |
| Material | Metal enclosure with corrosion-resistant coating |
| Isolation Voltage | Input to output: 3.0 kVAC |
| Hold-up Time | ≥20 ms at full load and 230 VAC input |
| Output Regulation | ±1% line and load regulation |
| Ripple & Noise | <100 mVp-p at full load |
| Safety Standards | UL508, EN60950-1, IEC/EN62368-1 |
| EMC Compliance | EN55032 Class B, EN61000-6-2, EN61000-4-2/3/4/5/6/8/11 |
| Cooling Efficiency | Passive convection, no moving parts |
| MTBF | >300,000 hours (MIL-HDBK-217F, 25°C) |

---

### 4. Functionality

The DRP048V060W1BN operates as a regulated AC-to-DC converter. It accepts a wide range of AC mains input (100–240 VAC) and delivers a stable 48 VDC output suitable for powering industrial networking devices, controllers, sensors, and communication modules.

Working Principle:
1. AC Input Stage: The power supply rectifies and filters incoming AC voltage.
2. Switching Regulation: A high-frequency switching converter regulates the DC output voltage precisely to 48 VDC.
3. Output Filtering: Low-ripple filtering ensures clean DC output for sensitive electronics.
4. Protection Circuits: Built-in protection mechanisms automatically shut down or limit current during overload or short-circuit conditions.

Use Cases and Applications:
- Industrial Ethernet switches, routers, and gateways
- Programmable Logic Controllers (PLCs)
- SCADA and automation systems
- Industrial communication modules (RS-485, Modbus, CANbus)
- Wireless access points and RF devices requiring 48 VDC
- Machine vision systems and sensors
- Process control instrumentation
- Factory automation and building management systems

Compatibility:
The DRP048V060W1BN is compatible with ORing’s full range of industrial networking devices, including managed and unmanaged Ethernet switches, media converters, and wireless access points. It can also be used with third-party equipment requiring 48 VDC regulated input.

---

### 5. Components & Accessories

Included Items:
- DRP048V060W1BN Power Supply Unit
- DIN rail mounting clip (pre-installed)
- Quick installation guide or datasheet

Optional Accessories (from ORing product ecosystem):
- Fiber Patch Cords:
- FPC-SCSC-MM3M (SC/SC, 62.5/125 μm, 3 m)
- FPC-SCLC-SS3M (SC/LC, 9/125 μm, 3 m)
- Fiber Patch Adapters:
- FCA-SC-MM (SC/SC, 62.5/125 μm)
- FCA-SC-SS (SC/SC, 9/125 μm)
- RF Antenna Bases:
- RFB-M2-150 (N Female, 1.5 m cable, SMA Male RS connector)
- RFB-M2-1000 (N Female, 10 m cable, SMA Male RS connector)
- RF Cables:
- RFC-NM-SMR-150 (N Male to SMA Male RS, 1.5 m)
- RFC-NM-SMR-1000 (N Male to SMA Male RS, 10 m)
- RF Surge Protectors:
- RFP-NF-NM-WAG (0–6 GHz, N Female to N Male)
- WLAN RF Antennas:
- RFA-P12-WG (2.4 GHz, 12 dBi, N Female)
- RFA-P14-WA (5.8 GHz, 14 dBi, N Female)
- M-Series Industrial Cables:
- M12C-4M4F-1000D (4-pin M12 Male to Female, 10 m, D-coding)
- M23C-5M00-300 (5-pin M23 Male to bare wire, 3 m)

These accessories enable seamless integration of the power supply into complex industrial networks, ensuring reliable connectivity and power distribution.

---

### 6. Installation & Setup

Installation Requirements:
- Standard 35 mm DIN rail (EN 60715 compliant)
- Adequate ventilation space (minimum 25 mm clearance on all sides)
- Ambient temperature within rated operating range
- Proper grounding and wiring according to industrial safety standards

Mounting Options:
- Snap-on DIN rail mounting for quick installation
- Vertical or horizontal orientation depending on cabinet layout
- Optional panel-mount adapter (if required)

Configuration Steps:
1. Ensure input power is disconnected before installation.
2. Mount the unit securely onto the DIN rail.
3. Connect AC input lines (L, N) and protective earth (PE).
4. Connect DC output terminals (+V, -V) to the load.
5. Verify polarity and secure all terminal screws.
6. Power on and check LED indicators for normal operation.

Safety Precautions:
- Do not operate without proper grounding.
- Avoid exposure to moisture or conductive dust.
- Ensure load current does not exceed rated output.
- Maintain adequate airflow for passive cooling.

---

### 7. Performance & Capabilities

Electrical Performance:
- Output Stability: Maintains ±1% voltage regulation under varying load and input conditions.
- Transient Response: Fast recovery from load changes, ensuring uninterrupted operation of connected devices.
- Efficiency: Typically above 85%, minimizing energy loss and heat generation.
- Hold-up Time: ≥20 ms at full load ensures stable output during brief input interruptions.
- Ripple and Noise: <100 mVp-p, suitable for precision electronics.

Environmental Performance:
- Operating Temperature: Wide industrial range (-40°C to +70°C).
- Humidity: 10–95% RH, non-condensing.
- Vibration Resistance: Designed to withstand industrial vibration levels per IEC 60068-2-6.
- Shock Resistance: Meets IEC 60068-2-27 standards.

Limitations:
- Not intended for medical or life-support applications.
- Requires adequate ventilation; not suitable for sealed enclosures without airflow.
- Output power derating may apply at high ambient temperatures.

---

### 8. Standards & Compliance

Safety Certifications:
- UL508 (Industrial Control Equipment)
- EN60950-1 / IEC62368-1 (Information Technology Equipment Safety)
- CE Marking (Low Voltage Directive 2014/35/EU)

EMC Compliance:
- EN55032 Class B (Conducted and Radiated Emissions)
- EN61000-6-2 (Industrial Immunity Standard)
- EN61000-4-2 (ESD Immunity)
- EN61000-4-3 (Radiated RF Immunity)
- EN61000-4-4 (EFT/Burst Immunity)
- EN61000-4-5 (Surge Immunity)
- EN61000-4-6 (Conducted RF Immunity)
- EN61000-4-8 (Magnetic Field Immunity)
- EN61000-4-11 (Voltage Dips and Interruptions)

Environmental Compliance:
- RoHS Directive 2011/65/EU (Restriction of Hazardous Substances)
- REACH Regulation (EC) No 1907/2006
- WEEE Directive (Waste Electrical and Electronic Equipment)

Quality Assurance:
- Manufactured under ISO 9001:2015 certified quality management system.
- 100% functional testing before shipment.

---

### 9. Additional Information

Warranty:
- Standard 3-year limited warranty covering manufacturing defects and component failures under normal operating conditions.

Technical Support:
- ORing provides global technical support, including installation guidance, troubleshooting, and firmware updates (if applicable).
- Documentation and datasheets available at [www.oring-networking.com](https://www.oring-networking.com).

Maintenance:
- Periodic inspection recommended every 12 months for terminal integrity and dust removal.
- No internal serviceable parts; replacement recommended in case of failure.

Product Lifecycle and Updates:
- Long-term availability guaranteed for industrial customers.
- Backward compatibility with previous DR and SDR series power supplies.
- Continuous improvement program ensures compliance with evolving safety and efficiency standards.

Related Models in the DR/SDR Series:
- DR-4512: 45 W, 12 VDC / 3.5 A
- DR-4524: 45 W, 24 VDC / 2 A
- DR-75-48: 75 W, 48 VDC / 1.6 A
- DR-120-48: 120 W, 48 VDC / 2.5 A
- SDR-240-48: 240 W, 48 VDC / 5 A
- SDR-480-48: 480 W, 48 VDC / 10 A

These models provide scalability for systems requiring different power capacities while maintaining consistent mechanical and electrical interfaces.

---

### Summary

The ORing DRP048V060W1BN is a robust, industrial-grade 60 W DIN rail power supply delivering 48 VDC regulated output. It is engineered for demanding industrial automation, networking, and control applications where reliability, efficiency, and safety are paramount. With universal AC input, wide temperature tolerance, and comprehensive protection features, it ensures stable operation in harsh environments. Its compliance with international safety and EMC standards, combined with ORing’s reputation for rugged design, makes it an ideal choice for mission-critical industrial systems requiring dependable 48 VDC power.