Comprehensive Product Summary – SUNIX ESW-1062-MMC Industrial Ethernet Switch

---

### 1. Product Overview

Product Name: Industrial 6*TX 2*FX MM Switch
Model: ESW-1062-MMC
Series: ESW-1062 Series (Unmanaged Industrial Ethernet Switches)
Article Number: ESW-1062-MMC
Manufacturer: SUNIX Co., Ltd.

The SUNIX ESW-1062-MMC is an unmanaged industrial-grade Ethernet switch designed for robust, reliable, and continuous operation in harsh industrial environments. It provides six 10/100Base-T(X) copper ports and two 100Base-FX multi-mode fiber ports, offering a total of eight network interfaces. The device is engineered for factory automation, transportation, building management, and utility control systems where network stability, electromagnetic immunity, and redundant power reliability are critical.

---

### 2. Key Features

- Unmanaged Industrial Ethernet Switch: Plug-and-play operation with no configuration required, ideal for simple network expansion in industrial environments.
- Port Configuration: 6 × 10/100Base-T(X) RJ45 ports and 2 × 100Base-FX multi-mode fiber ports (SC type standard).
- Multi-Mode Fiber Connectivity: Supports 50/125 μm fiber with a standard transmission distance of up to 2 km, providing EMI/RFI immunity and extended reach.
- Redundant Dual Power Inputs: Accepts 12–48 VDC (nominal 24 VDC) for high availability and uninterrupted operation.
- Configurable Alarm Relay Output: Provides fault indication for power failure or port link-down events, enabling integration with external alarm systems.
- Industrial-Grade Protection:
- ESD protection: 4 kVDC on Ethernet ports.
- Surge protection: 2 kVDC on power input.
- Reverse polarity protection included.
- Compact and Rugged Design: IP30-rated aluminum enclosure with DIN-rail mounting for easy installation in control cabinets.
- Wide Operating Temperature Range: 0°C to 60°C standard operation, suitable for most industrial environments.
- High Reliability: Designed for 24/7 continuous operation with minimal maintenance.
- Compliance with Industrial Standards: Meets UL, CE, FCC, and IEC industrial safety and EMC standards.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|------------------|
| Model | ESW-1062-MMC |
| Type | Unmanaged Industrial Ethernet Switch |
| Total Ports | 8 ports |
| Copper Ports | 6 × 10/100Base-T(X), RJ45 |
| Fiber Ports | 2 × 100Base-FX, Multi-Mode (SC standard) |
| Fiber Type | 50/125 μm multi-mode |
| Fiber Distance | Up to 2 km |
| Transmission Speed | 10/100 Mbps (auto-negotiation) |
| Transmission Distance (Copper) | Up to 100 m (Cat5e/Cat6 UTP cable) |
| Alarm Contact | 1 configurable relay output |
| Power Input | Dual 12–48 VDC (nominal 24 VDC) |
| Power Consumption | 1 A @ 12 VDC (approx. 12 W) |
| Protection | ESD 4 kVDC (Ethernet ports), Surge 2 kVDC (power), Reverse polarity protection |
| Enclosure | IP30-rated aluminum housing |
| Mounting | DIN-rail and wall-mountable |
| Dimensions (W × D × H) | 30 × 68.5 × 105 mm |
| Weight | Approx. 0.4 kg |
| Operating Temperature | 0°C to 60°C |
| Storage Temperature | -40°C to 85°C |
| Operating Humidity | 5% to 95% RH (non-condensing) |
| Shock Resistance | IEC60068-2-27 |
| Vibration Resistance | IEC60068-2-6 |
| Free-Fall Test | IEC60068-2-32 |
| Safety Certifications | UL60950, CAN/CSA-C22.2 No.60950 |
| Hazardous Location | UL/cUL Class 1, Division 2 |
| EMC Compliance | FCC Part 15, CISPR (EN55022) Class A, CE |
| Warranty | 5 years |

---

### 4. Functionality

The ESW-1062-MMC operates as an unmanaged Fast Ethernet switch, automatically detecting and forwarding Ethernet frames between connected devices. It supports both copper and fiber interfaces, allowing flexible network topologies that combine short-range and long-distance connections.

How It Works:
- The six RJ45 ports provide standard 10/100 Mbps Ethernet connectivity for PLCs, HMIs, sensors, and controllers.
- The two 100Base-FX multi-mode fiber ports extend network reach up to 2 km, ideal for connecting remote control panels or distributed automation nodes.
- The switch automatically negotiates speed and duplex mode, ensuring optimal performance without manual configuration.
- The relay output can be wired to an external alarm or monitoring system to signal power or link failures.

Use Cases and Applications:
- Factory automation and process control networks.
- Transportation systems (railway signaling, traffic control).
- Building automation (HVAC, lighting, access control).
- Utility and energy management systems.
- Industrial monitoring and SCADA networks.

Compatibility:
- Fully compliant with IEEE 802.3 and 802.3u standards.
- Compatible with standard Ethernet devices, including managed switches, routers, and industrial controllers.
- Supports both straight-through and crossover cables (auto MDI/MDI-X).

---

### 5. Components & Accessories

Included Items:
- ESW-1062-MMC switch unit.
- Removable terminal block for power input and alarm relay connection.
- DIN-rail mounting clip.
- Quick installation guide.

Optional Accessories:
- Wall-mounting brackets.
- Fiber connectors (ST or SC type, depending on configuration).
- External power supply (12–48 VDC).
- Fiber transceivers for different distance requirements (consult SUNIX for availability).

Connectors:
- Ethernet Ports: 6 × RJ45 (shielded).
- Fiber Ports: 2 × SC multi-mode connectors.
- Power Input: Removable terminal block + DC jack.
- Alarm Output: Relay contact (configurable).

---

### 6. Installation & Setup

Installation Requirements:
- Power supply: 12–48 VDC regulated source.
- Mounting surface: DIN-rail or wall panel.
- Ambient temperature: 0°C to 60°C.
- Humidity: 5–95% RH, non-condensing.

Mounting Options:
- DIN-Rail Mounting: Standard 35 mm DIN-rail clip included for quick installation in control cabinets.
- Wall Mounting: Optional brackets available for fixed installations.

Configuration:
- As an unmanaged switch, no software configuration is required.
- Simply connect power, attach Ethernet and fiber cables, and the switch will automatically begin forwarding traffic.
- The relay output can be wired to an alarm system for fault indication.

Power Connection:
- Connect dual power inputs for redundancy.
- The switch automatically switches to the secondary input if the primary source fails.
- Reverse polarity protection prevents damage from incorrect wiring.

---

### 7. Performance & Capabilities

Speed and Throughput:
- Supports 10/100 Mbps auto-negotiation on copper ports.
- Full-duplex and half-duplex operation with IEEE 802.3x flow control.
- Non-blocking switching architecture ensures wire-speed forwarding on all ports.

Capacity:
- 8 ports total, supporting simultaneous data transmission across all interfaces.
- Fiber ports extend communication up to 2 km, ideal for distributed industrial systems.

Efficiency:
- Low power consumption (approx. 12 W at 12 VDC).
- Passive cooling design for silent, maintenance-free operation.
- Redundant power inputs ensure continuous uptime.

Limitations:
- Unmanaged operation means no VLAN, QoS, or SNMP management features.
- Designed for Fast Ethernet (100 Mbps maximum per port), not Gigabit speeds.
- Multi-mode fiber limited to 2 km; for longer distances, single-mode variants (ESW-1062-SSC) are available.

---

### 8. Standards & Compliance

IEEE Standards:
- IEEE 802.3 (10Base-T Ethernet)
- IEEE 802.3u (100Base-TX / 100Base-FX Fast Ethernet)
- IEEE 802.3x (Flow Control)

Electrical & Environmental Compliance:
- ESD Protection: EN61000-4-2 (Level 3, ±4 kV contact discharge).
- Surge Protection: EN61000-4-5 (Level 3, ±2 kV).
- EFT/Burst: EN61000-4-4 compliance.
- Radiated Susceptibility: EN61000-4-3 compliance.

Safety Certifications:
- UL60950 (Information Technology Equipment Safety).
- CAN/CSA-C22.2 No.60950 (Canadian equivalent).
- UL/cUL Class 1, Division 2 (Hazardous Locations).

EMC Compliance:
- FCC Part 15 Class A (U.S. EMC standard).
- CISPR 22 / EN55022 Class A (European EMC standard).
- CE Marking (European conformity).

Mechanical & Environmental Tests:
- Shock: IEC60068-2-27.
- Vibration: IEC60068-2-6.
- Free-fall: IEC60068-2-32.

These certifications ensure the ESW-1062-MMC meets stringent industrial and safety requirements for deployment in mission-critical environments.

---

### 9. Additional Information

Warranty:
- 5-year limited hardware warranty covering manufacturing defects and component failures under normal operating conditions.

Support & Maintenance:
- SUNIX provides technical documentation, installation guides, and product datasheets.
- Technical support available via SUNIX service channels for troubleshooting and application guidance.
- No firmware updates required for unmanaged models.

Maintenance:
- Passive cooling design eliminates the need for fans or filters.
- Periodic inspection recommended for connector integrity and power supply stability.
- Clean fiber connectors periodically to maintain optimal signal quality.

Product Lifecycle & Availability:
- Part of the SUNIX ESW Industrial Ethernet Switch family, ensuring long-term availability and compatibility with other SUNIX networking products.
- Replacement and upgrade options available for managed or Gigabit-capable models (e.g., ESW-8062-GM or ESW-8082-GT series).

Environmental Considerations:
- RoHS-compliant materials used in manufacturing.
- Designed for energy efficiency and long operational life.

---

### Summary

The SUNIX ESW-1062-MMC is a compact, rugged, and reliable unmanaged industrial Ethernet switch offering six 10/100Base-T(X) copper ports and two 100Base-FX multi-mode fiber ports. It is engineered for industrial automation networks requiring stable, interference-free communication and minimal maintenance. With redundant 12–48 VDC power inputs, configurable alarm relay output, and robust ESD/surge protection, it ensures continuous operation even in electrically noisy or harsh environments.

Its IP30 aluminum enclosure, DIN-rail mounting, and compliance with UL, CE, and FCC standards make it suitable for deployment in control panels, substations, and distributed automation systems. The ESW-1062-MMC delivers dependable Ethernet connectivity for mission-critical industrial applications where uptime, durability, and simplicity are paramount.

---

In summary:
- Model: ESW-1062-MMC
- Ports: 6 × 10/100Base-T(X) + 2 × 100Base-FX (MM)
- Power: Dual 12–48 VDC inputs
- Protection: ESD 4 kV, Surge 2 kV, Reverse polarity
- Dimensions: 30 × 68.5 × 105 mm
- Mounting: DIN-rail / wall
- Operating Temp: 0°C to 60°C
- Certifications: UL, CE, FCC, Class 1 Div 2
- Warranty: 5 years

The ESW-1062-MMC exemplifies SUNIX’s commitment to providing total industrial networking solutions that combine reliability, simplicity, and industrial-grade performance.