Comprehensive Product Summary – SUNIX ESW-1062-SSC-E Industrial Ethernet Switch

---

### 1. Product Overview

Product Name: Industrial 6*TX 2*FX SM Switch (Extended Temperature)
Model: ESW-1062-SSC-E
Series: ESW-1062 Series – Unmanaged Industrial Ethernet Switches
Article Number: ESW-1062-SSC-E
Manufacturer: SUNIX Co., Ltd.
Product Category: Industrial Unmanaged Fast Ethernet Switch
Product Type: 8-Port Industrial Ethernet Switch (6 × 10/100Base‑TX + 2 × 100Base‑FX Single‑Mode)

The SUNIX ESW‑1062‑SSC‑E is part of the ESW‑1062 unmanaged industrial Ethernet switch family, designed for rugged, mission‑critical networking in automation, transportation, and utility environments. It provides six 10/100Base‑TX copper ports and two 100Base‑FX single‑mode fiber ports, offering reliable data transmission over extended distances and under extreme environmental conditions. The “E” suffix denotes the extended temperature version, capable of continuous operation from ‑40°C to +85°C.

---

### 2. Key Features

- Unmanaged Industrial Ethernet Switch: Plug‑and‑play operation with no configuration required, ideal for simple, robust network expansion.
- Port Configuration: 6 × 10/100Base‑TX (RJ‑45) auto‑negotiating ports and 2 × 100Base‑FX single‑mode fiber ports (SC connector standard).
- Extended Temperature Range: Operates reliably from ‑40°C to +85°C, suitable for outdoor and factory‑floor environments.
- Rugged Industrial Design: IP30 aluminum enclosure with high mechanical strength, vibration resistance, and electromagnetic immunity.
- Redundant Power Inputs: Dual 12–48 V DC inputs ensure uninterrupted operation in case of power source failure.
- Alarm Relay Output: One configurable relay output for system fault or power failure notification, enabling integration with external alarm systems.
- High Electrical Protection:
- ESD protection: ±4 kV DC on Ethernet ports
- Surge protection: ±2 kV DC on power input
- Reverse polarity protection included
- Compact DIN‑Rail Mounting: Space‑efficient design (30 × 68.5 × 105 mm) for easy installation in control cabinets.
- Fiber Optic Connectivity: Two single‑mode fiber ports extend network reach up to 30 km, providing EMI/RFI immunity and secure data transmission.
- Low Power Consumption: Typical 12 W at 12 V DC (1 A).
- High Reliability: Designed for 24/7 continuous operation in harsh industrial environments.
- Compliance with Industrial Standards: Meets UL, CE, FCC, and IEC environmental and safety standards.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Model | ESW‑1062‑SSC‑E |
| Type | Unmanaged Industrial Ethernet Switch |
| Ports | 6 × 10/100Base‑TX (RJ‑45), 2 × 100Base‑FX (Single‑Mode, SC) |
| Transmission Speed | 10/100 Mbps (auto‑negotiation) |
| Transmission Distance | RJ‑45: up to 100 m (Cat5e/Cat6 UTP); Fiber: up to 30 km (9/125 µm single‑mode) |
| Relay Output | 1 configurable alarm relay output |
| Power Input | Dual 12–48 V DC (nominal 24 V DC) |
| Power Consumption | 12 V DC @ 1 A (12 W typical) |
| Protection | ESD ±4 kV DC (Ethernet ports), Surge ±2 kV DC (power), Reverse polarity protection |
| Enclosure | IP30 aluminum housing |
| Mounting | DIN‑rail and wall‑mountable |
| Dimensions (W × D × H) | 30 × 68.5 × 105 mm |
| Weight | Approx. 0.45 kg |
| Operating Temperature | ‑40 °C to +85 °C (Extended) |
| Storage Temperature | ‑40 °C to +85 °C |
| Operating Humidity | 5 % to 95 % RH (non‑condensing) |
| Standards Compliance | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Safety Certifications | UL 60950, CAN/CSA‑C22.2 No. 60950 |
| Hazardous Location | UL/cUL Class I, Division 2 |
| EMC Compliance | FCC Part 15 Class A, CISPR (EN55022) Class A, CE |
| Environmental Tests | Shock: IEC 60068‑2‑27; Vibration: IEC 60068‑2‑6; Free‑fall: IEC 60068‑2‑32 |
| Warranty | 5 years |

---

### 4. Functionality

The ESW‑1062‑SSC‑E functions as an unmanaged Layer 2 Ethernet switch, automatically learning and forwarding Ethernet frames between copper and fiber interfaces. It supports auto‑negotiation and auto‑MDI/MDI‑X on all RJ‑45 ports, simplifying installation and eliminating the need for crossover cables.

Operation Principle:
- Each copper port detects link speed (10/100 Mbps) and duplex mode automatically.
- The switch maintains a MAC address table for efficient packet forwarding.
- Fiber ports provide long‑distance backbone connectivity, ideal for linking remote control panels or field devices.
- The relay output can be configured to trigger alarms on power loss or link failure, enabling integration with supervisory control systems.

Typical Use Cases:
- Factory automation networks connecting PLCs, HMIs, and sensors.
- Transportation systems (railway signaling, traffic control).
- Building automation and energy management systems.
- Utility substations and remote monitoring stations.
- Industrial process control and SCADA networks.

Compatibility:
- Fully compatible with IEEE 802.3/802.3u/802.3x Ethernet standards.
- Interoperable with standard Ethernet devices, routers, and managed switches.
- Supports both copper and fiber media for flexible network topology design.

---

### 5. Components & Accessories

Included Items:
- ESW‑1062‑SSC‑E switch unit
- Removable terminal block for power input and alarm relay connection
- DIN‑rail mounting clip (pre‑installed)
- Quick installation guide

Optional Accessories:
- Wall‑mounting bracket kit
- Fiber optic patch cords (SC single‑mode, 9/125 µm)
- DC power supply (12–48 V DC external adapter)
- Protective dust caps for fiber connectors

Connectors:
- Ethernet Ports: 6 × RJ‑45 (shielded, auto‑MDI/MDI‑X)
- Fiber Ports: 2 × SC single‑mode connectors
- Power Input: Removable terminal block (dual input) + DC jack
- Alarm Output: Relay contact (configurable for fault indication)

---

### 6. Installation & Setup

Installation Requirements:
- Power supply: 12–48 V DC regulated source (redundant inputs recommended).
- Mounting surface: DIN‑rail (35 mm standard) or wall panel.
- Ambient conditions: ‑40 °C to +85 °C, 5–95 % RH non‑condensing.

Mounting Options:
- DIN‑Rail Mounting: Snap the switch onto a standard 35 mm DIN‑rail using the integrated clip.
- Wall Mounting: Optional bracket kit allows secure wall installation.

Wiring & Configuration:
- Connect DC power to the removable terminal block (observe polarity).
- Connect Ethernet devices via RJ‑45 ports using Cat5e/Cat6 cables.
- Connect fiber links using SC single‑mode connectors (9/125 µm).
- The switch operates automatically upon power‑up—no software configuration required.
- The relay output can be wired to an external alarm or indicator for fault monitoring.

Safety Precautions:
- Ensure proper grounding of the switch chassis.
- Avoid connecting power while wiring to prevent surge damage.
- Maintain minimum clearance for ventilation and cable bending radius.

---

### 7. Performance & Capabilities

Data Throughput:
- 10/100 Mbps per copper port, full/half duplex auto‑negotiation.
- Non‑blocking switching architecture ensures wire‑speed forwarding on all ports.

Switching Capacity:
- 1.6 Gbps backplane bandwidth (typical for 8‑port Fast Ethernet).
- Store‑and‑forward switching with automatic address learning and aging.

Latency & Efficiency:
- Low latency suitable for real‑time industrial control traffic.
- Broadcast storm protection inherent to hardware design.

Fiber Performance:
- Single‑mode fiber ports support up to 30 km transmission distance.
- Immune to electromagnetic interference (EMI/RFI), ensuring stable communication in high‑noise environments.

Power & Reliability:
- Dual power inputs provide redundancy; automatic failover ensures continuous operation.
- Reverse polarity protection prevents damage from incorrect wiring.
- Surge and ESD protection safeguard against transient voltages.

Environmental Robustness:
- Extended temperature operation (‑40 °C to +85 °C) allows deployment in outdoor enclosures or unconditioned industrial spaces.
- Withstands vibration, shock, and free‑fall per IEC 60068 standards.

Limitations:
- Unmanaged design—no VLAN, QoS, or SNMP management functions.
- Fixed port configuration (6 × TX, 2 × FX).
- Fiber connectors limited to SC type (other types available on request).

---

### 8. Standards & Compliance

Ethernet Standards:
- IEEE 802.3 (10Base‑T)
- IEEE 802.3u (100Base‑TX/FX)
- IEEE 802.3x (Flow Control)

Electrical & Safety Compliance:
- UL 60950 (Information Technology Equipment Safety)
- CAN/CSA‑C22.2 No. 60950
- UL/cUL Class I, Division 2 (Hazardous Location)

Electromagnetic Compatibility (EMC):
- FCC Part 15 Class A
- CISPR (EN55022) Class A
- CE Marking (EMC Directive compliance)

Environmental & Mechanical Tests:
- Shock: IEC 60068‑2‑27
- Vibration: IEC 60068‑2‑6
- Free‑fall: IEC 60068‑2‑32

Protection Ratings:
- IP30 enclosure (dust‑resistant, non‑sealed)
- ESD protection: ±4 kV DC (Ethernet ports)
- Surge protection: ±2 kV DC (power input)

Fiber Optic Standards:
- Single‑mode fiber: 9/125 µm, standard transmission distance 30 km
- Connector type: SC (ST optional upon request)

Quality & Reliability:
- Designed for 24/7 continuous operation in industrial environments.
- Manufactured under ISO‑certified quality management systems.

---

### 9. Additional Information

Warranty:
- 5‑year limited hardware warranty covering manufacturing defects and component failures under normal use.

Technical Support:
- SUNIX provides global technical assistance, including installation guidance, troubleshooting, and product lifecycle support.
- Documentation includes datasheets, wiring diagrams, and application notes.

Maintenance:
- No periodic maintenance required; passive cooling and solid‑state design minimize failure points.
- Recommended to inspect fiber connectors periodically for dust or contamination.

Firmware & Updates:
- As an unmanaged switch, no firmware updates or configuration software are required.

Service Life & Reliability:
- Designed MTBF exceeding 100,000 hours under typical industrial conditions.
- Continuous operation supported in vibration‑prone or high‑temperature environments.

Environmental Considerations:
- RoHS‑compliant materials used in construction.
- Low power consumption contributes to energy‑efficient system design.

Ordering Information:
- Model: ESW‑1062‑SSC‑E (Single‑Mode, SC Connector, Extended Temperature)
- Variants:
- ESW‑1062‑MMC‑E (Multi‑Mode, SC Connector, Extended Temperature)
- ESW‑1062‑TX (All‑copper version)

Applications Summary:
- Industrial automation and control networks
- Transportation and traffic monitoring systems
- Power generation and substation communication
- Oil, gas, and mining field instrumentation
- Building management and security systems

---

### Summary

The SUNIX ESW‑1062‑SSC‑E is a compact, rugged, and reliable unmanaged industrial Ethernet switch engineered for demanding automation and control environments. With six 10/100Base‑TX copper ports and two 100Base‑FX single‑mode fiber ports, it provides flexible connectivity for both local and long‑distance network segments. Its extended temperature tolerance (‑40 °C to +85 °C), redundant power inputs, and robust electrical protection make it ideal for mission‑critical applications where downtime is unacceptable.

The switch’s plug‑and‑play operation simplifies deployment, while its industrial‑grade design ensures long‑term stability in harsh conditions. Compliance with UL, CE, FCC, and IEC standards guarantees safety and interoperability across global installations. With a five‑year warranty and proven SUNIX reliability, the ESW‑1062‑SSC‑E delivers a cost‑effective, maintenance‑free solution for industrial Ethernet infrastructure.

---

End of Product Summary – SUNIX ESW‑1062‑SSC‑E Industrial Ethernet Switch