Comprehensive Product Summary – RAYON FPI800 PoE Power Injector

---

### 1. Product Overview

Product Name: PoE Power Injector
Model: FPI800
Series: FPI Series – Power over Ethernet (PoE) Injector Line
Article Number: FPI800
Manufacturer: RAYON Technology Co., Ltd.
Manufacturer Address: 2F, No. 177, Chung Shan 2 Rd., Lu Chou City, Taipei Hsien, Taiwan
Contact:
- Tel: +886-2-82858362
- Fax: +886-2-82857065
- Email: rayon@ms1.hinet.net
- Websites: [www.computex.com.tw/rayon](http://www.computex.com.tw/rayon), [www.rayontech.com](http://www.rayontech.com)

Product Description:
The RAYON FPI800 is an eight-port Power over Ethernet (PoE) power injector designed to deliver both data and electrical power to network devices over standard Ethernet cabling. It supports IEEE 802.3af PoE standards and Cisco legacy detection, providing up to 15.4 watts per port. The unit operates from a universal AC input range of 90–264 VAC and is optimized for 10/100 Mbps Ethernet environments. Its compact form factor and integrated LED indicators make it ideal for network installations requiring centralized power distribution to multiple PoE-enabled devices.

---

### 2. Key Features

- Eight-Port PoE Capability: Supports up to eight independent PoE channels, each capable of delivering 15.4 W of power to connected devices.
- IEEE 802.3af Compliance: Fully compliant with the IEEE 802.3af standard for Power over Ethernet, ensuring interoperability with a wide range of PoE-enabled devices such as IP cameras, VoIP phones, and wireless access points.
- Cisco Legacy Detection: Provides compatibility with Cisco’s proprietary PoE detection method, allowing seamless integration with legacy Cisco-powered devices.
- Universal AC Input: Operates from 90–264 VAC at 47–63 Hz, suitable for global deployment without the need for voltage conversion.
- Dynamic Power Management: Intelligent power allocation across ports ensures stable operation and prevents overload conditions.
- LED Status Indicators: Front-panel LEDs provide real-time monitoring of power and port status, including power-on, overload, short-circuit, and insufficient power conditions.
- Compact Design: Space-efficient enclosure (230 × 150 × 40 mm) suitable for desktop or rack-mounted installations in wiring closets or network cabinets.
- Scalable and Cost-Effective: Enables easy expansion of PoE capability in existing non-PoE networks without replacing existing switches.
- Power Over Spare Lines: Utilizes spare wire pairs in 10/100 Mbps Ethernet cabling for power transmission, maintaining data integrity.
- Optional Models:
- FPI800A: Supports IEEE 802.3af detection only.
- FPI800C: Supports Cisco legacy detection only.

---

### 3. Technical Specifications

| Parameter | Specification |
|----------------|-------------------|
| Number of Ports | 8 RJ45 ports |
| Data Rate | 10/100 Mbps |
| Input Power | 90–264 VAC, 47–63 Hz |
| PoE Output Power | 15.4 W per port (IEEE 802.3af Class 0) |
| Total Power Budget | 65 W total PoE power budget with dynamic power management |
| Power Transmission Mode | Power over spare lines (10/100 Mbps) |
| Connectors | Data In: RJ45; Data Out: RJ45 |
| LED Indicators | PWR (AC power ON); POE 1–8 (status per port: normal, overload, short-circuit, insufficient power) |
| Dimensions | 230 mm (W) × 150 mm (D) × 40 mm (H) |
| Weight | Approx. 1.2–1.5 kg (typical, depending on configuration) |
| Operating Temperature | -15°C to +50°C |
| Storage Temperature | -15°C to +80°C |
| Operating Humidity | 10%–90% RH (non-condensing) |
| Storage Humidity | 5%–95% RH (non-condensing) |
| Material | Metal enclosure for durability and heat dissipation |
| Mounting Options | Desktop or wall-mountable |
| Special Order Models | FPI800A (IEEE 802.3af only), FPI800C (Cisco legacy only) |

---

### 4. Functionality

The FPI800 functions as a mid-span PoE injector, enabling network devices that lack native PoE support to receive both data and power through a single Ethernet cable. It connects between a non-PoE Ethernet switch and the powered devices (PDs). The injector receives data from the switch via the “Data In” RJ45 ports and outputs combined data and power through the “Data Out” RJ45 ports to the connected devices.

Typical Use Cases:
- Supplying power to IP cameras in surveillance systems.
- Powering VoIP phones in office environments.
- Providing power to wireless access points in enterprise or campus networks.
- Supporting remote network devices where separate power outlets are unavailable.

Applications:
- Small to medium-sized business networks.
- Industrial automation systems.
- Building management and security systems.
- Educational and healthcare network infrastructures.

Compatibility:
- IEEE 802.3af-compliant powered devices.
- Cisco legacy PoE devices.
- Compatible with standard Cat5/5e/6 Ethernet cabling.

---

### 5. Components & Accessories

Included Components:
- FPI800 PoE Power Injector main unit.
- AC power cord (region-specific plug type).
- User manual and quick installation guide.

Optional Accessories:
- SP1301 PoE Splitter: Converts PoE input to 12.5 VDC output for non-PoE devices (13 W capacity, IEEE 802.3af Class 0).
- SP2401 PoE Splitter: Converts PoE input to 24 W output (IEEE 802.3at Class 4).
- PD1301/PD2401 PoE Power Modules: Compact PCB modules (2.54 × 7.4 cm) for integrating PoE functionality into new device designs.
- Mounting Brackets: For wall or rack installation (optional).
- Ethernet Patch Cables: Standard Cat5e or Cat6 cables for data and power transmission.

Connectors:
- Data In Ports: RJ45 connectors for connection to non-PoE switch or router.
- Data Out Ports: RJ45 connectors for connection to PoE-enabled or PoE-powered devices.

---

### 6. Installation & Setup

Requirements:
- Standard AC power source (90–264 VAC, 47–63 Hz).
- Ethernet cabling (Cat5 or higher).
- Non-PoE switch or router for data input.

Installation Steps:
1. Placement: Position the FPI800 on a stable surface or mount it on a wall or rack using optional brackets.
2. Power Connection: Connect the AC power cord to the unit and plug it into a grounded electrical outlet.
3. Network Connection:
- Connect the “Data In” RJ45 ports to the corresponding ports on the non-PoE switch.
- Connect the “Data Out” RJ45 ports to the PoE-powered devices (PDs).
4. Power-On: Switch on the unit; the PWR LED will illuminate to indicate AC power is active.
5. Verification: Check the POE 1–8 LEDs for each port to confirm normal operation. LEDs indicate status such as normal operation, overload, short-circuit, or insufficient power.
6. Configuration: No software configuration is required; the device operates automatically once connected.

Mounting Options:
- Desktop Use: Rubber feet provide stability and vibration resistance.
- Wall Mounting: Optional brackets allow vertical or horizontal mounting.
- Rack Integration: Can be installed in network racks using custom mounting kits.

---

### 7. Performance & Capabilities

Power Delivery:
- Each port delivers up to 15.4 W, compliant with IEEE 802.3af Class 0.
- Total power budget of 65 W shared across all eight ports.
- Dynamic power management ensures optimal distribution of available power.

Data Transmission:
- Supports 10/100 Mbps Ethernet speeds.
- Transparent data pass-through with no latency or packet loss introduced by the injector.

Efficiency:
- High-efficiency internal power supply minimizes energy loss and heat generation.
- Designed for continuous 24/7 operation in network environments.

Protection Features:
- Overload protection per port.
- Short-circuit protection.
- Over-temperature and over-voltage safeguards.
- Automatic recovery after fault conditions.

Limitations:
- Not suitable for Gigabit (1000 Mbps) data rates; designed for 10/100 Mbps networks.
- Total power budget limits simultaneous full-load operation on all ports.

Reliability:
- Industrial-grade components ensure long service life.
- Stable operation across wide temperature and humidity ranges.

---

### 8. Standards & Compliance

Compliance Standards:
- IEEE 802.3 10BASE-T / 100BASE-TX Ethernet.
- IEEE 802.3af Power over Ethernet standard.
- Cisco legacy PoE detection and compatibility.

Electrical Safety & EMC:
- Designed to meet international safety and electromagnetic compatibility standards (specific certifications may vary by region).

Environmental Compliance:
- RoHS-compliant materials (lead-free and environmentally safe).
- Designed for energy efficiency and reduced environmental impact.

Industry Standards Supported:
- Power over Spare Lines (Mode B) for 10/100 Mbps Ethernet.
- RJ45 pinout per TIA/EIA-568B standard.

---

### 9. Additional Information

Warranty:
- Standard manufacturer warranty (typically 1–2 years, depending on region and distributor policy).
- Covers defects in materials and workmanship under normal operating conditions.

Technical Support:
- Provided by RAYON Technology Co., Ltd. via email or phone.
- Online resources available through the company’s website, including datasheets and installation guides.

Maintenance:
- Minimal maintenance required; periodic dust cleaning recommended.
- Ensure adequate ventilation to prevent overheating.
- Inspect power and network cables periodically for wear or damage.

Firmware & Updates:
- The FPI800 operates as a hardware-based injector with no firmware updates required.
- Optional model variants (FPI800A, FPI800C) available for specific detection protocols.

Service & Replacement:
- Replacement units and spare parts available through authorized RAYON distributors.
- Optional extended warranty and service contracts may be offered.

Integration with RAYON PoE Ecosystem:
- The FPI800 complements RAYON’s broader PoE product line, including:
- FPI400/FPI401: Four-port PoE injectors for smaller networks.
- GPI4000/GPI4001: Gigabit PoE injectors for 10/100/1000 Mbps environments.
- GPS8075/GPS8180: Managed PoE switches with 75 W and 180 W power budgets, respectively.
- SP1301/SP2401 Splitters: For converting PoE to DC power for non-PoE devices.
- PD1301/PD2401 Modules: For integrating PoE functionality into new device designs.

Operational Environment:
- Suitable for office, industrial, and commercial network installations.
- Designed for continuous operation in temperature-controlled environments.

---

### Summary

The RAYON FPI800 PoE Power Injector is a robust, eight-port mid-span injector engineered to extend Power over Ethernet capabilities to existing 10/100 Mbps networks. With universal AC input, IEEE 802.3af compliance, and Cisco legacy detection, it provides a flexible and cost-effective solution for powering multiple network devices remotely. Its compact design, LED monitoring, and dynamic power management make it ideal for scalable network deployments in enterprise, industrial, and security applications. The FPI800 exemplifies RAYON’s commitment to reliable, standards-based PoE solutions that simplify network power distribution while maintaining high performance and safety standards.