ACL-IEEE488-1m
LOOKING FOR THE RIGHT
INDUSTRIAL SOLUTION?
Discover embedded, communication and automation solutions tailored to your application.
GPIB-F-LPE
PCIe Low Profile IEEE-488.2 (GPIB) interface with analyzer
300,00 EUR
including VAT 357.00 EUR
- IEEE-488.1 / IEEE-488.2 Compliance: Fully compliant with both IEEE-488.1 and IEEE-488.2 standards, ensuring compatibility with a wide range of GPIB instruments and controllers.
- High-Speed Data Transfer: Supports a maximum transfer rate of 1.5 Mbyte/sec, enabling rapid communication with multiple instruments.
- Bus Master Transfer: Allows direct data transfer between the PC and the board without CPU load, improving system efficiency and throughput.
- Integrated GPIB Bus Analyzer: Provides real-time monitoring and analysis of GPIB bus signals, enabling debugging and performance optimization.
- 2Kbyte FIFO Memory: Onboard FIFO buffers for both transmission and reception ensure stable, high-speed data flow and reduced latency.
- High-Precision Timer: Built-in timer for precise time measurement and synchronization in Windows environments.
- Low Profile PCI Express Form Factor: Compliant with PCI Express Base Specification Rev. 1.0a ×1; includes both low-profile and standard brackets for flexible installation.
- Multi-Board Support: Up to four boards can be installed in a single system, allowing expansion of GPIB channels.
- Interrupt Handling: One interrupt request signal (INTA#) for efficient event-driven communication.
- Long-Term Availability: Uses CONTEC’s proprietary high-speed GPIB controller (compatible with PD7210 and later), ensuring stable long-term supply and support.
- Diagnostic and Utility Software: Includes diagnostic tools for hardware verification, interrupt testing, and communication validation.
- Line Monitoring: Capable of reading control line states (IFC, ATN, SRQ, REN, EOI, DAV, NRFD, NDAC) and data line status (DIO1–DIO8).
- Cross-Platform Software Support: Compatible with Windows and Linux API-TOOL drivers, MATLAB, and LabVIEW environments.
- RoHS and Lead-Free Compliance: Environmentally friendly design meeting modern regulatory standards.
- High-Speed Data Transfer: Supports a maximum transfer rate of 1.5 Mbyte/sec, enabling rapid communication with multiple instruments.
- Bus Master Transfer: Allows direct data transfer between the PC and the board without CPU load, improving system efficiency and throughput.
- Integrated GPIB Bus Analyzer: Provides real-time monitoring and analysis of GPIB bus signals, enabling debugging and performance optimization.
- 2Kbyte FIFO Memory: Onboard FIFO buffers for both transmission and reception ensure stable, high-speed data flow and reduced latency.
- High-Precision Timer: Built-in timer for precise time measurement and synchronization in Windows environments.
- Low Profile PCI Express Form Factor: Compliant with PCI Express Base Specification Rev. 1.0a ×1; includes both low-profile and standard brackets for flexible installation.
- Multi-Board Support: Up to four boards can be installed in a single system, allowing expansion of GPIB channels.
- Interrupt Handling: One interrupt request signal (INTA#) for efficient event-driven communication.
- Long-Term Availability: Uses CONTEC’s proprietary high-speed GPIB controller (compatible with PD7210 and later), ensuring stable long-term supply and support.
- Diagnostic and Utility Software: Includes diagnostic tools for hardware verification, interrupt testing, and communication validation.
- Line Monitoring: Capable of reading control line states (IFC, ATN, SRQ, REN, EOI, DAV, NRFD, NDAC) and data line status (DIO1–DIO8).
- Cross-Platform Software Support: Compatible with Windows and Linux API-TOOL drivers, MATLAB, and LabVIEW environments.
- RoHS and Lead-Free Compliance: Environmentally friendly design meeting modern regulatory standards.
Comprehensive Product Summary – GPIB-F-LPE (PCIe Low Profile IEEE-488.2 Interface with Analyzer)
### 1. Product Overview
Product Name: GPIB-F-LPE
Model Number: GPIB-F-LPE
Series: High-Performance F Series (GPIB Communication Boards)
Article Number: GPIB-F-LPE
Manufacturer: CONTEC Co., Ltd.
Product Category: PCI Express Low Profile IEEE-488.2 (GPIB) Interface Board with Analyzer Function
Product Type: Communication Interface Board for IEEE-488.1/488.2 GPIB Bus Systems
The CONTEC GPIB-F-LPE is a high-performance, low-profile PCI Express interface board designed for IEEE-488.2 (GPIB) communication. It provides high-speed data transfer, bus master operation, and integrated GPIB bus analysis capabilities. The board is part of CONTEC’s F Series, which is engineered for industrial automation, measurement, and control applications requiring reliable, high-speed GPIB connectivity.
### 2. Key Features
- IEEE-488.1 / IEEE-488.2 Compliance: Fully compliant with both IEEE-488.1 and IEEE-488.2 standards, ensuring compatibility with a wide range of GPIB instruments and controllers.
- High-Speed Data Transfer: Supports a maximum transfer rate of 1.5 Mbyte/sec, enabling rapid communication with multiple instruments.
- Bus Master Transfer: Allows direct data transfer between the PC and the board without CPU load, improving system efficiency and throughput.
- Integrated GPIB Bus Analyzer: Provides real-time monitoring and analysis of GPIB bus signals, enabling debugging and performance optimization.
- 2Kbyte FIFO Memory: Onboard FIFO buffers for both transmission and reception ensure stable, high-speed data flow and reduced latency.
- High-Precision Timer: Built-in timer for precise time measurement and synchronization in Windows environments.
- Low Profile PCI Express Form Factor: Compliant with PCI Express Base Specification Rev. 1.0a ×1; includes both low-profile and standard brackets for flexible installation.
- Multi-Board Support: Up to four boards can be installed in a single system, allowing expansion of GPIB channels.
- Interrupt Handling: One interrupt request signal (INTA#) for efficient event-driven communication.
- Long-Term Availability: Uses CONTEC’s proprietary high-speed GPIB controller (compatible with PD7210 and later), ensuring stable long-term supply and support.
- Diagnostic and Utility Software: Includes diagnostic tools for hardware verification, interrupt testing, and communication validation.
- Line Monitoring: Capable of reading control line states (IFC, ATN, SRQ, REN, EOI, DAV, NRFD, NDAC) and data line status (DIO1–DIO8).
- Cross-Platform Software Support: Compatible with Windows and Linux API-TOOL drivers, MATLAB, and LabVIEW environments.
- RoHS and Lead-Free Compliance: Environmentally friendly design meeting modern regulatory standards.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Interface Standard | IEEE-488.1 / IEEE-488.2 |
| Number of Channels | 1 |
| Maximum Transfer Speed | 1.5 Mbyte/sec |
| Data Format | 8 parallel data lines, 3 handshake lines |
| Signal Logic | Negative logic (Low ≤ 0.8 V, High ≥ 2.0 V) |
| Interrupts | 1 interrupt request signal (INTA#) |
| I/O Address | Any 128-byte boundary |
| Cable Length Between Devices | Up to 4 m |
| Total Cable Length | Up to 20 m |
| Maximum Number of Devices | 15 devices per bus |
| Power Consumption | 3.3 VDC, 600 mA (typical) |
| Bus Interface | PCI Express Base Specification Rev. 1.0a ×1 |
| Board Dimensions | 121.69 mm (L) × 67.90 mm (H) |
| Form Factor | Low Profile PCI Express (includes standard bracket) |
| Connector Type | 24-pin ribbon connector (AMP 555139-1 or equivalent) |
| Operating Temperature | 0 to +50 °C |
| Operating Humidity | 20–90% RH (non-condensing) |
| Storage Temperature | -10 to +60 °C |
| Weight | Approx. 120 g |
| Mounting Orientation | Horizontal or vertical (depending on chassis slot) |
### 4. Functionality
The GPIB-F-LPE functions as a high-speed GPIB controller or device interface for connecting PCs to IEEE-488.2-compliant instruments such as oscilloscopes, multimeters, signal generators, and analyzers.
Operation Overview:
- The board communicates over the GPIB bus using 8-bit parallel data lines and 3 handshake lines (DAV, NRFD, NDAC).
- It supports both talker and listener modes, enabling bidirectional communication.
- The onboard bus master controller handles data transfers autonomously, minimizing CPU overhead.
- The integrated analyzer monitors bus activity, capturing and decoding signal transitions for diagnostic purposes.
Typical Use Cases:
- Automated test equipment (ATE) systems.
- Laboratory instrumentation control.
- Data acquisition and measurement automation.
- Production line testing and calibration.
- Research and development environments requiring synchronized instrument control.
Compatibility:
- Compatible with IEEE-488.1 and IEEE-488.2 instruments from major manufacturers.
- Works with Windows (API-PAC(W32), ACX-PAC(W32)) and Linux (API-TOOL) drivers.
- Supports MATLAB and LabVIEW integration for scientific and engineering applications.
### 5. Components & Accessories
Included Items:
- GPIB-F-LPE board (PCIe Low Profile)
- Low-profile bracket (pre-installed)
- Standard PCI bracket (included)
- CN-GP/C GPIB connector adapter
- Driver and utility software (API-PAC(W32), ACX-PAC(W32))
- Documentation and installation guide
Optional Accessories:
- GPIB Cables:
- PCN-T02 (2 m, double-shielded)
- PCN-T04 (4 m, double-shielded)
- Connector Adapter: CN-GP/C (for tight slot spaces or high-noise environments)
- Bus Analyzer Software: Analyzer utility for signal monitoring and data capture
- API Libraries: API-PAC(W32) for Windows, API-TOOL for Linux
- Third-Party Integration: MATLAB and LabVIEW drivers for advanced control and data analysis
### 6. Installation & Setup
System Requirements:
- PC with available PCI Express ×1 slot (compatible with ×4, ×8, ×16 slots)
- Operating System: Windows 10/11, Windows Server, or Linux (kernel 2.6 or later)
- Minimum CPU: Intel Core i3 or equivalent
- Minimum RAM: 2 GB
- Administrative privileges for driver installation
Installation Procedure:
1. Power off the PC and disconnect the power cable.
2. Insert the GPIB-F-LPE board into an available PCI Express slot.
3. Secure the board using the supplied bracket (low-profile or standard).
4. Connect the GPIB cable (PCN-T02 or PCN-T04) to the board’s 24-pin connector via CN-GP/C adapter.
5. Power on the system and install the driver software (API-PAC(W32) or API-TOOL).
6. Verify installation using the included diagnostic utility.
7. Configure GPIB address and communication parameters via the software interface.
Configuration Options:
- Assign GPIB primary address (0–30)
- Select controller or device mode
- Enable/disable interrupt-driven communication
- Configure FIFO buffer size and timeout parameters
- Set analyzer capture mode and trigger conditions
### 7. Performance & Capabilities
Data Transfer Performance:
- Maximum throughput: 1.5 Mbyte/sec
- Bus master DMA transfer for high-speed bulk data movement
- 2Kbyte FIFO buffers for both transmit and receive channels
- Low CPU utilization due to autonomous data handling
Analyzer Capabilities:
- Real-time monitoring of GPIB control and data lines
- Capture of up to 64K data samples for post-analysis
- Detection of bus contention, timing errors, and protocol violations
- Supports trigger-based capture for event-driven diagnostics
Timing & Synchronization:
- Built-in high-precision timer for accurate time-stamping
- Supports synchronization with external events via software triggers
System Expansion:
- Up to four GPIB-F-LPE boards can be installed in one system
- Each board operates independently with unique interrupt and address space
Limitations:
- Maximum total cable length limited to 20 m per bus
- Up to 15 devices can be connected per GPIB bus segment
- Requires shielded GPIB cables for optimal noise immunity
### 8. Standards & Compliance
Electrical and Communication Standards:
- IEEE-488.1 (GPIB Physical Layer)
- IEEE-488.2 (GPIB Protocol Layer)
- PCI Express Base Specification Rev. 1.0a
- CE Marking (EMC and Safety Compliance)
- RoHS Directive (Restriction of Hazardous Substances)
- Lead-Free (Pb-Free) Manufacturing Process
Software and Driver Standards:
- Windows API-PAC(W32) and ACX-PAC(W32) compliant
- Linux API-TOOL driver (open-source compatible)
- MATLAB and LabVIEW certified interface libraries
Environmental Compliance:
- Operating Temperature: 0–50 °C
- Storage Temperature: -10–60 °C
- Humidity: 20–90% RH (non-condensing)
- Vibration Resistance: 2 G (operating)
- Shock Resistance: 10 G (non-operating)
### 9. Additional Information
Warranty & Support:
- Warranty Period: 3 years standard manufacturer warranty
- Technical Support: Provided via CONTEC’s global support network and online portal
- Software Updates: Free driver and firmware updates available from www.contec.com
- Documentation: Comprehensive user manual, installation guide, and API reference included
Maintenance:
- Periodic inspection of connectors and cables recommended
- Firmware updates available for performance enhancements
- Diagnostic utilities assist in verifying board health and communication integrity
Software Ecosystem:
- API-PAC(W32): Windows API library for C/C++, Visual Basic, and .NET
- ACX-PAC(W32): Configuration and diagnostic tool for Windows
- API-TOOL (Linux): Open-source driver and shared library for Linux systems
- MATLAB Support: API-GPLV(W32) driver for MATLAB integration
- LabVIEW Support: VI-DAQ library for National Instruments LabVIEW
Ordering Information:
| Model | Description |
|------------|----------------|
| GPIB-F-LPE | PCI Express Low Profile IEEE-488.2 (GPIB) Interface with Analyzer |
| PCN-T02 | 2 m GPIB double-shielded cable |
| PCN-T04 | 4 m GPIB double-shielded cable |
| CN-GP/C | GPIB connector adapter for tight slot installations |
Applications:
- Automated test systems (ATE)
- Instrument control in laboratories
- Semiconductor device testing
- Calibration and verification systems
- Data acquisition and logging
- Industrial automation and process monitoring
### Summary
The CONTEC GPIB-F-LPE is a robust, high-speed PCI Express interface board designed for IEEE-488.2 (GPIB) communication in industrial and laboratory environments. With a 1.5 Mbyte/sec transfer rate, bus master DMA, and integrated analyzer, it delivers exceptional performance for demanding test and measurement applications. Its low-profile PCIe design, broad software compatibility, and long-term reliability make it an ideal solution for modern automated systems requiring precise, high-throughput instrument communication.
Manufacturer Website: [www.contec.com](https://www.contec.com)
Support Email: support@contec.com
Product Category: Industrial Automation – Communication Interface Boards
Product Family: GPIB F Series – High-Performance IEEE-488.2 Interfaces
### 1. Product Overview
Product Name: GPIB-F-LPE
Model Number: GPIB-F-LPE
Series: High-Performance F Series (GPIB Communication Boards)
Article Number: GPIB-F-LPE
Manufacturer: CONTEC Co., Ltd.
Product Category: PCI Express Low Profile IEEE-488.2 (GPIB) Interface Board with Analyzer Function
Product Type: Communication Interface Board for IEEE-488.1/488.2 GPIB Bus Systems
The CONTEC GPIB-F-LPE is a high-performance, low-profile PCI Express interface board designed for IEEE-488.2 (GPIB) communication. It provides high-speed data transfer, bus master operation, and integrated GPIB bus analysis capabilities. The board is part of CONTEC’s F Series, which is engineered for industrial automation, measurement, and control applications requiring reliable, high-speed GPIB connectivity.
### 2. Key Features
- IEEE-488.1 / IEEE-488.2 Compliance: Fully compliant with both IEEE-488.1 and IEEE-488.2 standards, ensuring compatibility with a wide range of GPIB instruments and controllers.
- High-Speed Data Transfer: Supports a maximum transfer rate of 1.5 Mbyte/sec, enabling rapid communication with multiple instruments.
- Bus Master Transfer: Allows direct data transfer between the PC and the board without CPU load, improving system efficiency and throughput.
- Integrated GPIB Bus Analyzer: Provides real-time monitoring and analysis of GPIB bus signals, enabling debugging and performance optimization.
- 2Kbyte FIFO Memory: Onboard FIFO buffers for both transmission and reception ensure stable, high-speed data flow and reduced latency.
- High-Precision Timer: Built-in timer for precise time measurement and synchronization in Windows environments.
- Low Profile PCI Express Form Factor: Compliant with PCI Express Base Specification Rev. 1.0a ×1; includes both low-profile and standard brackets for flexible installation.
- Multi-Board Support: Up to four boards can be installed in a single system, allowing expansion of GPIB channels.
- Interrupt Handling: One interrupt request signal (INTA#) for efficient event-driven communication.
- Long-Term Availability: Uses CONTEC’s proprietary high-speed GPIB controller (compatible with PD7210 and later), ensuring stable long-term supply and support.
- Diagnostic and Utility Software: Includes diagnostic tools for hardware verification, interrupt testing, and communication validation.
- Line Monitoring: Capable of reading control line states (IFC, ATN, SRQ, REN, EOI, DAV, NRFD, NDAC) and data line status (DIO1–DIO8).
- Cross-Platform Software Support: Compatible with Windows and Linux API-TOOL drivers, MATLAB, and LabVIEW environments.
- RoHS and Lead-Free Compliance: Environmentally friendly design meeting modern regulatory standards.
### 3. Technical Specifications
| Parameter | Specification |
|----------------|------------------|
| Interface Standard | IEEE-488.1 / IEEE-488.2 |
| Number of Channels | 1 |
| Maximum Transfer Speed | 1.5 Mbyte/sec |
| Data Format | 8 parallel data lines, 3 handshake lines |
| Signal Logic | Negative logic (Low ≤ 0.8 V, High ≥ 2.0 V) |
| Interrupts | 1 interrupt request signal (INTA#) |
| I/O Address | Any 128-byte boundary |
| Cable Length Between Devices | Up to 4 m |
| Total Cable Length | Up to 20 m |
| Maximum Number of Devices | 15 devices per bus |
| Power Consumption | 3.3 VDC, 600 mA (typical) |
| Bus Interface | PCI Express Base Specification Rev. 1.0a ×1 |
| Board Dimensions | 121.69 mm (L) × 67.90 mm (H) |
| Form Factor | Low Profile PCI Express (includes standard bracket) |
| Connector Type | 24-pin ribbon connector (AMP 555139-1 or equivalent) |
| Operating Temperature | 0 to +50 °C |
| Operating Humidity | 20–90% RH (non-condensing) |
| Storage Temperature | -10 to +60 °C |
| Weight | Approx. 120 g |
| Mounting Orientation | Horizontal or vertical (depending on chassis slot) |
### 4. Functionality
The GPIB-F-LPE functions as a high-speed GPIB controller or device interface for connecting PCs to IEEE-488.2-compliant instruments such as oscilloscopes, multimeters, signal generators, and analyzers.
Operation Overview:
- The board communicates over the GPIB bus using 8-bit parallel data lines and 3 handshake lines (DAV, NRFD, NDAC).
- It supports both talker and listener modes, enabling bidirectional communication.
- The onboard bus master controller handles data transfers autonomously, minimizing CPU overhead.
- The integrated analyzer monitors bus activity, capturing and decoding signal transitions for diagnostic purposes.
Typical Use Cases:
- Automated test equipment (ATE) systems.
- Laboratory instrumentation control.
- Data acquisition and measurement automation.
- Production line testing and calibration.
- Research and development environments requiring synchronized instrument control.
Compatibility:
- Compatible with IEEE-488.1 and IEEE-488.2 instruments from major manufacturers.
- Works with Windows (API-PAC(W32), ACX-PAC(W32)) and Linux (API-TOOL) drivers.
- Supports MATLAB and LabVIEW integration for scientific and engineering applications.
### 5. Components & Accessories
Included Items:
- GPIB-F-LPE board (PCIe Low Profile)
- Low-profile bracket (pre-installed)
- Standard PCI bracket (included)
- CN-GP/C GPIB connector adapter
- Driver and utility software (API-PAC(W32), ACX-PAC(W32))
- Documentation and installation guide
Optional Accessories:
- GPIB Cables:
- PCN-T02 (2 m, double-shielded)
- PCN-T04 (4 m, double-shielded)
- Connector Adapter: CN-GP/C (for tight slot spaces or high-noise environments)
- Bus Analyzer Software: Analyzer utility for signal monitoring and data capture
- API Libraries: API-PAC(W32) for Windows, API-TOOL for Linux
- Third-Party Integration: MATLAB and LabVIEW drivers for advanced control and data analysis
### 6. Installation & Setup
System Requirements:
- PC with available PCI Express ×1 slot (compatible with ×4, ×8, ×16 slots)
- Operating System: Windows 10/11, Windows Server, or Linux (kernel 2.6 or later)
- Minimum CPU: Intel Core i3 or equivalent
- Minimum RAM: 2 GB
- Administrative privileges for driver installation
Installation Procedure:
1. Power off the PC and disconnect the power cable.
2. Insert the GPIB-F-LPE board into an available PCI Express slot.
3. Secure the board using the supplied bracket (low-profile or standard).
4. Connect the GPIB cable (PCN-T02 or PCN-T04) to the board’s 24-pin connector via CN-GP/C adapter.
5. Power on the system and install the driver software (API-PAC(W32) or API-TOOL).
6. Verify installation using the included diagnostic utility.
7. Configure GPIB address and communication parameters via the software interface.
Configuration Options:
- Assign GPIB primary address (0–30)
- Select controller or device mode
- Enable/disable interrupt-driven communication
- Configure FIFO buffer size and timeout parameters
- Set analyzer capture mode and trigger conditions
### 7. Performance & Capabilities
Data Transfer Performance:
- Maximum throughput: 1.5 Mbyte/sec
- Bus master DMA transfer for high-speed bulk data movement
- 2Kbyte FIFO buffers for both transmit and receive channels
- Low CPU utilization due to autonomous data handling
Analyzer Capabilities:
- Real-time monitoring of GPIB control and data lines
- Capture of up to 64K data samples for post-analysis
- Detection of bus contention, timing errors, and protocol violations
- Supports trigger-based capture for event-driven diagnostics
Timing & Synchronization:
- Built-in high-precision timer for accurate time-stamping
- Supports synchronization with external events via software triggers
System Expansion:
- Up to four GPIB-F-LPE boards can be installed in one system
- Each board operates independently with unique interrupt and address space
Limitations:
- Maximum total cable length limited to 20 m per bus
- Up to 15 devices can be connected per GPIB bus segment
- Requires shielded GPIB cables for optimal noise immunity
### 8. Standards & Compliance
Electrical and Communication Standards:
- IEEE-488.1 (GPIB Physical Layer)
- IEEE-488.2 (GPIB Protocol Layer)
- PCI Express Base Specification Rev. 1.0a
- CE Marking (EMC and Safety Compliance)
- RoHS Directive (Restriction of Hazardous Substances)
- Lead-Free (Pb-Free) Manufacturing Process
Software and Driver Standards:
- Windows API-PAC(W32) and ACX-PAC(W32) compliant
- Linux API-TOOL driver (open-source compatible)
- MATLAB and LabVIEW certified interface libraries
Environmental Compliance:
- Operating Temperature: 0–50 °C
- Storage Temperature: -10–60 °C
- Humidity: 20–90% RH (non-condensing)
- Vibration Resistance: 2 G (operating)
- Shock Resistance: 10 G (non-operating)
### 9. Additional Information
Warranty & Support:
- Warranty Period: 3 years standard manufacturer warranty
- Technical Support: Provided via CONTEC’s global support network and online portal
- Software Updates: Free driver and firmware updates available from www.contec.com
- Documentation: Comprehensive user manual, installation guide, and API reference included
Maintenance:
- Periodic inspection of connectors and cables recommended
- Firmware updates available for performance enhancements
- Diagnostic utilities assist in verifying board health and communication integrity
Software Ecosystem:
- API-PAC(W32): Windows API library for C/C++, Visual Basic, and .NET
- ACX-PAC(W32): Configuration and diagnostic tool for Windows
- API-TOOL (Linux): Open-source driver and shared library for Linux systems
- MATLAB Support: API-GPLV(W32) driver for MATLAB integration
- LabVIEW Support: VI-DAQ library for National Instruments LabVIEW
Ordering Information:
| Model | Description |
|------------|----------------|
| GPIB-F-LPE | PCI Express Low Profile IEEE-488.2 (GPIB) Interface with Analyzer |
| PCN-T02 | 2 m GPIB double-shielded cable |
| PCN-T04 | 4 m GPIB double-shielded cable |
| CN-GP/C | GPIB connector adapter for tight slot installations |
Applications:
- Automated test systems (ATE)
- Instrument control in laboratories
- Semiconductor device testing
- Calibration and verification systems
- Data acquisition and logging
- Industrial automation and process monitoring
### Summary
The CONTEC GPIB-F-LPE is a robust, high-speed PCI Express interface board designed for IEEE-488.2 (GPIB) communication in industrial and laboratory environments. With a 1.5 Mbyte/sec transfer rate, bus master DMA, and integrated analyzer, it delivers exceptional performance for demanding test and measurement applications. Its low-profile PCIe design, broad software compatibility, and long-term reliability make it an ideal solution for modern automated systems requiring precise, high-throughput instrument communication.
Manufacturer Website: [www.contec.com](https://www.contec.com)
Support Email: support@contec.com
Product Category: Industrial Automation – Communication Interface Boards
Product Family: GPIB F Series – High-Performance IEEE-488.2 Interfaces
-
NewPCIbrds.pdf
Manual
- ACL-IEEE488-1m - 1m IEEE-488 cable high quality
- ACL-IEEE488-2m - 2m IEEE-488 cable high quality
- ACL-IEEE488-4m - 4m IEEE-488 cable high quality
- ACL-IEEE488-8m - 8m IEEE-488 cable high quality
